Пікірлер

• 
  @bradstone976512 күн бұрын

  Buy a promodeler servo and your done

• 
  @RCnurse11 күн бұрын

  Never heard that brand, I'll check them out!

• 
  @3DJunkie18 күн бұрын

  Good video bud Was there any mix with flaps and elevator ?

• 
  @RCnurse18 күн бұрын

  I honestly don't 100% recall that. But I'm thinking there was a mix

• 
  @AlkisKamikaze29 күн бұрын

  Badass plane ! Dont call it RafaEl though 😄

• 
  @RCnurse29 күн бұрын

  I need to work on my pronunciation 😄

• 
  @IzibelllaАй бұрын

  i love your plane <3

• 
  @RCnurse29 күн бұрын

  Thanks!!

• 
  @jarrettroell9933Ай бұрын

  What a badass RC Jet.

• 
  @RCnurseАй бұрын

  Thanks dude! This jet is so stable and easy to fly.

• 
  @FarmerFpvАй бұрын

  That was a good save. Could have been so much worse. Easy fix with some Beacon Foam Tac or Bob Smith's Foam cure. My favorite two types of glue for foam repair. If you haven't tried them you need too. It's the best.

• 
  @RCnurseАй бұрын

  Thanks, dude! I'm super happy it's still in great condition! I don't normally use foam tac, but I have some, and I'll try it. For some reason, I've always just used ca, but of course that stuff can melt your foam if you use the wrong stuff.

• 
  @TylerBrackinАй бұрын

  Thanks for the vid! Just got one of these.. did you have to bind it to the dx3? Or is it ready to go out the box.. I've bound my drones and such but not a car before 😂

• 
  @RCnurseАй бұрын

  Glad you liked the video! The hammer rey is awesome. It was bound already, if it's not, it's pretty easy. Just look up a vid on binding dx3.

• 
  @chiprobertson3094Ай бұрын

  You can fly that slow bird in a school field

• 
  @RCnurseАй бұрын

  Ehh lol

• 
  @FarmerFpvАй бұрын

  That is a great flying and sounding EDF Jet.

• 
  @RCnurseАй бұрын

  Thanks! Sure is, I wish my regular f16 was flying! Now it's a parts jet.

• 
  @tommyg5729Ай бұрын

  perfect spot for flying, I need to get into planes. a brief period I did helicopters, never ended well and what a pain to fix.

• 
  @RCnurseАй бұрын

  This spot is definitely awesome. Especially with the mountains in the background. Helicopters are tough. Just got my blade eclipse 360. Crashed while doing 3d. Gonna fix it and make a video.

• 
  @troyprudhomme8222Ай бұрын

  I know it's windy, but it's looking like the plane is struggling power wise.

• 
  @RCnurseАй бұрын

  It could use a little more oomph. At some point I'd like to upgrade edfs

• 
  @troyprudhomme8222Ай бұрын

  @@RCnurse it's all good man. That the good thing about this hobby... Upgrading. Btw I'm a male nurse who is into RC as well. We need more male nurses into RC 😁.

• 
  @RCnurseАй бұрын

  @troyprudhomme8222 that's awesome dude! What department? And I agree, gotta destress without alcohol and drugs🤙🤜

• 
  @troyprudhomme8222Ай бұрын

  @@RCnurse I was traveling for 2.5 years being placed on a multitude of units. Mainly PCU, but thrown everywhere. Currently I'm on a tele unit on an in-house contract. It's not bad at all. Keep on doing what your doing man... I enjoy the videos.

• 
  @RCnurseАй бұрын

  @troyprudhomme8222 thanks for your selflessness dude. Need more good nurses. And thanks man, I'll keep it coming. Kinda slow now because I have a 1 year old.

• 
  @snuggles668Ай бұрын

  👀

• 
  @RCnurseАй бұрын

  😁✈️

• 
  @bobturner3388Ай бұрын

  Looks like an SU-24 or a Mig

• 
  @RCnurseАй бұрын

  MiG-29

• 
  @USA.org.Ай бұрын

  Approved 👍🏻

• 
  @Nevin2SickАй бұрын

  Dope🔥

• 
  @RCnurseАй бұрын

  Thanks!

• 
  @TypicalpotatogamingАй бұрын

  What’s the company you ordered it from

• 
  @RCnurseАй бұрын

  Motionrc.com it's a freewing mig 29

• 
  @Steveexpress24650Ай бұрын

  ​@@RCnurse I know it it's 678$

• 
  @TypicalpotatogamingАй бұрын

  What’s this model called

• 
  @RCnurseАй бұрын

  Freewing MiG-29. From motionrc.com

• 
  @lawrencewilliams1477Ай бұрын

  DESERT OPPS 🏜 ❤

• 
  @RCnurseАй бұрын

  For real!😄

• 
  @christmasw330Ай бұрын

  That's badass

• 
  @RCnurseАй бұрын

  @christmasw330 thank you!!

• 
  @tonyyimboАй бұрын

  Did it suck up a lot of sand? I’m ready to remaiden my su35 so this video helps 😂

• 
  @RCnurseАй бұрын

  Only on the landing where I tipped the MiG. Glad to help!

• 
  @tonyyimboАй бұрын

  @@RCnurse that thing is a tank ! You put it through some abuse and was there any damage at all?

• 
  @RCnurseАй бұрын

  @tonyyimbo just the right main retract came undone. All it needed was an application of glue! I flew it today for a short I'm putting out 😁

• 
  @rcpilotwillАй бұрын

  Nice!!!

• 
  @RCnurseАй бұрын

  Thanks dude!

• 
  @tonyyimboАй бұрын

  Can’t wait for the video ! Been wondering about this model

• 
  @RCnurseАй бұрын

  I actually maidened it today. Didn't go well. My mistake. I had all my expos on all surfaces set to 25%. The manual calls for 100% rudder, 80% ailerons, and I think 100% canards. I'll have replacement parts on order. I'll remaiden, after including the original crash video.

• 
  @polyscientАй бұрын

  I came to your video for battery advice, and found what I was looking for at the end. Your hunch was that the 4000mAh 6S pack is a little heavy for that plane. Thanks for the advice. I would turn off those dumb Spektrum "SMART" ESC low battery alarms. You probably already figured that out, since this video is 2 years old. The battery voltage drops significantly when you go full throttle, making it nearly impossible to set those alarms to any useful voltage limits.

• 
  @RCnurseАй бұрын

  Yeah, I agree. That was when I really first started flying, and I was still learning my transmitter. It flew way better with a smaller pack. Thanks for the advice!

• 
  @cherylhafner1946Ай бұрын

  Your mom told me about your channel and my grandson loves this kind of stuff! How cool!

• 
  @RCnurseАй бұрын

  Awesome!!! I'm glad he likes it! 😁😁

• 
  @rcpilotwillАй бұрын

  Nice

• 
  @RCnurseАй бұрын

  Thanks, my man! You as well, great stuff.

• 
  @HciContractorАй бұрын

  Is flying the B2 similar to flying a wing? It looks a little tricky.....

• 
  @RCnurseАй бұрын

  I've never flown a wing before. But it was a very stable plane and I'd say if you're comfortable with flying at least a 70mm edf, you'd be alright flying this. Unfortunately I don't have black beauty anymore 😕

• 
  @HciContractorАй бұрын

  @@RCnurse interesting that's cool. I've got that XFly EDF wing man and it's crazy! Almost 100mph and it'll do flat spins to fast you can't count how many. But it's a bitch to land! Thanks brother I appreciate the insight and channel!

• 
  @RCnurseАй бұрын

  @HciContractor I really want to get one now. Its your fault, lol. I also can't flat spin, although I've never tried. I appreciate the kindness, brother! I'll do my best to keep good stuff coming.

• 
  @HciContractorАй бұрын

  @@RCnurse you won't have any problem doing a flat spin with that X-Fly. It's crazy as hell and only $159 on Amazon. The EDF's are on each wing tip and they are controlled with the Rudder (there's no rudder, bank and yank) I've got to put it on a switch I'm so used to flying 3-D I can't fly without using the rudder and if you touch that rotor it'll go into a spin so fast! I haven't figured out how to land the dang thing. I'm waiting for you to get one and teach me how to land this little rocket ship!

• 
  @HciContractorАй бұрын

  I didn't know they send you a few perks like that. I've checked it out a few times and the comments stopped me from buying membership. Thanks brother man

• 
  @RCnurseАй бұрын

  My membership has been worth it 100%. You get your own "rep," and they help out a lot, answering questions quickly, etc. And you get points a lot quicker. To some, it really doesn't matter, but for me, I've enjoyed it.

• 
  @HciContractorАй бұрын

  @@RCnurse it'd be worth it to me also. I appreciate the info man!

• 
  @RCnurseАй бұрын

  @@HciContractor no problem 😊. I'm going to have some awesome videos coming soon🤛

• 
  @user-zi2sw6ge2rАй бұрын

  I am very happy as a guy from Finland

• 
  @RCnurseАй бұрын

  Hello my Finnish friend! Greetings from California!

• 
  @SimeonSales2 ай бұрын

  Same motor I have in my limitless

• 
  @RCnurse2 ай бұрын

  Thats crazy! How's it run?

• 
  @SimeonSales2 ай бұрын

  @@RCnurse haven’t ran it yet. Getting my bullet 8mm to 6.5 mm today

• 
  @cactus5443-Ай бұрын

  I’ve run a 980kv one in a limitless. I had overdriven gearing and it was a rocket. Motor barely got warm

• 
  @RCnurseАй бұрын

  @cactus5443- that's pretty awesome! Probably got a pretty big pinion?

• 
  @cactus5443-Ай бұрын

  @@RCnurse 39t pinion and 34t spool.

• 
  @coconut35272 ай бұрын

  I hope you have fun

• 
  @RCnurse2 ай бұрын

  Thanks! Full video will be coming out in about 1 month. Going on vacation!

• 
  @tungstenkid22712 ай бұрын

  It's been 40 years since I flew r/c, yet I still have an uncomfortable dream now and again in which I'm fiercely concentrating on flying a model, I suppose my subconscious was imprinted all those years ago with the need to keep it under control and sometimes 'plays it back' while i'm asleep..:)

• 
  @RCnurse2 ай бұрын

  Haha, well I hope you enjoy my videos to get ya back in the right space! 🤜🤜

• 
  @ghoward67972 ай бұрын

  Great beginner airplane for park flyers...i have a few of them

• 
  @RCnurse2 ай бұрын

  Yes. I agree! 🤛

• 
  @Thrashaero2 ай бұрын

  Not bad. Though would be nice to have bind ability to other radio if it's not already. Kind of a funny brand name, let's see if they come out with a Hunter-Killer drone 😄

• 
  @RCnurse2 ай бұрын

  They have a FTF, fatuba ready to fly version. Haha, I'd imagine not so far in the future!

• 
  @Mikeylikesit19682 ай бұрын

  You can bind to a radiomaster and there just Rebranded XK planes

• 
  @RCnurseАй бұрын

  @Mikeylikesit1968 thanks for the info!

• 
  @tungstenkid22712 ай бұрын

  The speed it flies i'd be a nervous wreck trying to handle it..:)

• 
  @RCnurse2 ай бұрын

  It's definitely a little squirmy until you get used to it.

• 
  @ghoward67972 ай бұрын

  They actually fly very well for what you pay... looks fast cause they are very small but I bet you're not going over 50 mph

• 
  @RCnurse2 ай бұрын

  @ghoward6797 probably about 20 I'd say

• 
  @ghoward67972 ай бұрын

  @@RCnurse yeah not too bad... but they are small....I dropped my 190 from at least a hundred feet doing a loop with a spin lol and it just bounced off the ground...I thought crap that's the end of that... but walked out put the prop back on and tossed it flu fine.... do that to any other model and it would have been junk

• 
  @RCnurse2 ай бұрын

  @@ghoward6797 yeah crashed into a tree, nothing lol.

• 
  @elwoodkotil25382 ай бұрын

  Aura not aurora!

• 
  @RCnurse2 ай бұрын

  My mistake, thanks for the correction!

• 
  @elwoodkotil25382 ай бұрын

  👌

• 
  @donpardo90933 ай бұрын

  fly much? NOT!

• 
  @RCnurse3 ай бұрын

  I'm pretty fly.

• 
  @donpardo90933 ай бұрын

  another foam POS! crappy looking model.

• 
  @tdmaker853 ай бұрын

  awesome gr8 job

• 
  @RCnurse3 ай бұрын

  Thank you!

• 
  @MrBurns06183 ай бұрын

  I have these on my 2wd brushless stampede. The six pack MT, and their almost too grippy for a rear wheel, real motor system. Can’t keep it on all fours lol

• 
  @RCnurse3 ай бұрын

  I like them for the price but they never stayed glued for me.

• 
  @FarmerFpv3 ай бұрын

  That f-16 tracks like an Arrow! You have it dialed! I want one now! It flies so well!

• 
  @RCnurse3 ай бұрын

  It really does! I love flying it! Get one while you can!

• 
  @FarmerFpv3 ай бұрын

  That EDF sounds really nice going by. For high-speed dive passes having the plane a little nose-heavy is the key to perfect ones. It dulls out the elevator making it more anemic around the center that expo and rates can't fix. It will be much smoother and consistent in the dive and the level pass. I was taught that at Horizon Hobby RC Fest by Ali Machinchy. Though I'm sure he explained it to me with much more technical reasons as to why it works. lol

• 
  @RCnurse3 ай бұрын

  Thank you for the advice! I'll have to try that. The Mig has a natural tendency to float up on the dives.

• 
  @johnpayne11173 ай бұрын

  Love watching this stuff bro , but put that stuff down and spend every minute you can paying attention to that boy.. I know he was there but time is short. Play with rc when kids are grown brother.

• 
  @RCnurse3 ай бұрын

  I completely understand where you're coming from. I am very careful with the time I spend with the hobby. Children above all else 😁🤛

• 
  @RCRoads3 ай бұрын

  Great job on the video. I have been having trouble with my EC5 connectors. They are always so hard to unplug. I have never examined the contacts to see if there was corrosion or heating issues. I just assumed that the plastic housing was the cause. After watching this I think I need to re-evaluate things. I wonder if there is a conductive lubricate that might help. I only mention this because in the electrical industry there is a product called noalox (Antioxidant Compound) reduce galling and seizing, improves conductivity and eliminates electrolysis.

• 
  @RCnurse3 ай бұрын

  Thank you, I think I'll try said lubricant! Thanks for the suggestion!

• 
  @ficosk83 ай бұрын

  Great filming! I had accidentaly reverse while thinking I was flying with SAFE and wanted to switch it off. It lasted a couple of 1/100 sec or maybe 1-2 seconds until I reversed it again and came up the forest again... But I did crash my Draco into the trees later last year :( depth problems :P

• 
  @RCnurse3 ай бұрын

  Thanks, and sorry to hear that!

• 
  @lawrencewilliams14773 ай бұрын

  YOU DONT WASTE TIME STRAIGHT UP IN THE AIR MINE IN BOX 😊

• 
  @RCnurse3 ай бұрын

  Get it out!✈️😃

• 
  @FarmerFpv3 ай бұрын

  I have the same bird. It is a fun flyer. She is very floaty. I fly mine a little more tail-heavy than what is recommended about 3/8 inch back so that I can harrier land it on the short runway we have. Great flight.

• 
  @RCnurse3 ай бұрын

  I might try that, which could really reduce throttle far out. Thank you for watching!

• 
  @FarmerFpv3 ай бұрын

  @@RCnurse Thanks for posting entertaining videos.

• 
  @alphabean3 ай бұрын

  What a great way to handle a crash. I've got to take a lesson from you!!🙂

• 
  @RCnurse3 ай бұрын

  Thank you🤛🤛 she's coming back!

• 
  @MammothPaige4 ай бұрын

  Looks tail heavy

• 
  @RCnurse4 ай бұрын

  I think you're right!

• 
  @Tallguysrc4 ай бұрын

  if your serious about 3d foamies thw twisted hobbys crack yak 55 is the best trainer

• 
  @RCnurse4 ай бұрын

  Thank you. After flying the eratix, I definitely want something that somebody recommends because I don't know really anything about 3D planes.

• 
  @Tallguysrc4 ай бұрын

  kzread.info/dash/bejne/eHZ7rbytZdm5lbw.htmlsi=ItK8f3QPf6rwQ8PD

• 
  @Luisfernando-kr7wq4 ай бұрын

  Cool plane. Nice kids, you are a blessed man. Greetings keep em flying..! Planes and kids.!😊

• 
  @RCnurse4 ай бұрын

  I really appreciate it, I am blessed 🙌 😇.

• 
  @ralphhowing34734 ай бұрын

  Looks like you've got the whole family on board with some of videos I'm sure your wife is the camara lady. Just like R/C Sailors great vid.

• 
  @RCnurse4 ай бұрын

  Thank you, just a gopro on my head for most videos!