Пікірлер

• 
  @Josh-ri7hy2 күн бұрын

  This light seems amazing for the price. As a lighting novice I have a question… if a light has CMY mixing what’s the point of the color wheel? Mainly for mixed colors and rainbow effect? Thanks

• 
  @TheatricallyJerry2 күн бұрын

  There are certain colors the CMY can't create that CMY can. Also mixing CMY and the color Wheel at the same time creates more dynamic colors.

• 
  @cebuweddingemceecebueventh17882 күн бұрын

  How did you connect the screen at the back of your Code console?

• 
  @GobaUlianov3 күн бұрын

  how did you put the pictures on the devices, can you show the instructions on how to do it?

• 
  @TheatricallyJerry3 күн бұрын

  @@GobaUlianov kzread.info/dash/bejne/eZed16mHl7bMeso.htmlsi=eF9AYGCcUZ5bxOvB

• 
  @GobaUlianov3 күн бұрын

  how did you put the pictures on the devices, can you show the instructions on how to do it?

• 
  @delariomario9606 күн бұрын

  Hallo Great Video, If I want to save this, do I have to use a fader? Or is it possible to create buttons on the display.

• 
  @TheatricallyJerry6 күн бұрын

  @@delariomario960 You can save the effects as a user effect and recall it by pressing the button on the screen or you can use the effect to store in a cue, cue list or playback Fader.You can also edit the effect label to help you remember what the effect is.

• 
  @mochirgifadhilalabi98556 күн бұрын

  can you make tutorial code v3 connect to WYSYWIG

• 
  @TheatricallyJerry6 күн бұрын

  @@mochirgifadhilalabi9855 Yes I can do a tutorial on how to attach a visualizer to Victory 3.

• 
  @oletro78509 күн бұрын

  It's better to contact them directly because they won't likely see your shorts or videos. Try to contact: Color Imagination, Hi-ltte, Honghe Lighting, LQE Lighting, Mitek Light, Optlaser, Polarlights, Riukoe & Uplus Lighting

• 
  @TheatricallyJerry9 күн бұрын

  Thanks for the tips! 🙏

• 
  @ch_usama_arain13 күн бұрын

  Hello Dear How can I contact My Victory 3 with extranal screen for visualiser

• 
  @TheatricallyJerry13 күн бұрын

  To connect a external screen for visualizer you need to connect the Victory 3 to a Ethernet hub via Victory 3's Artnet port. Then connect a PC or Laptop to the hub via ethernet. Next go into the settings on the Victory 3 and enable Artnet. Hit setup-Network Settings to view and set a IP address, subnet and gateway. Then you can use your visualizer.

• 
  @ch_usama_arain12 күн бұрын

  @@TheatricallyJerry we need a software of visualiser

• 
  @TheatricallyJerry12 күн бұрын

  @@ch_usama_arain correct

• 
  @ch_usama_arain11 күн бұрын

  @@TheatricallyJerry you can send me the link of software

• 
  @TheatricallyJerry11 күн бұрын

  @@ch_usama_arain You must purchase a visualizer. Any visualizer that supports ARTNET will work.

• 
  @user-ec7jz9vk4x19 күн бұрын

  Good video

• 
  @TheatricallyJerry19 күн бұрын

  @@user-ec7jz9vk4x Thanks for the support 👍

• 
  @muralikrishnaa887520 күн бұрын

  Good respand super ❤

• 
  @TheatricallyJerry19 күн бұрын

  @@muralikrishnaa8875 My Pleasure! Thanks for the support👍

• 
  @muralikrishnaa887524 күн бұрын

  I want chase video code 3 please

• 
  @TheatricallyJerry23 күн бұрын

  @@muralikrishnaa8875 Yes, soon!

• 
  @elpks24 күн бұрын

  hi! the honeycomb directs the light to a subject and prevents the light to spill at the background, try using it that way and you will see what they meant by creating shadows, good review thanks alot

• 
  @kevinswan831128 күн бұрын

  Thanks for the tutorial. On the neutrik instructions it says to clip off the lock tab. Thoughts?

• 
  @TheatricallyJerry28 күн бұрын

  @@kevinswan8311 You can but it ruins a perfectly good Ethernet cable, just in case you want to uninstall the Ethercon connector. If you have a cheap Ethernet cable you could but mine are costly because of their run length.

• 
  @tomcummings46328 күн бұрын

  Where did you get the hinged rack? Thanks!

• 
  @tomcummings46328 күн бұрын

  Found it on Amazon. Thanks for the great videos, Jerry!

• 
  @TheatricallyJerry28 күн бұрын

  @@tomcummings463 My pleasure, you'll love the build quality its a solid piece of metal.

• 
  @lebraun12345Ай бұрын

  Would you be able to remove the clamps on the bottom and easily replace it with unistrut mounts? Are the bolts that hold the clamps on standard mounting hardware size?

• 
  @TheatricallyJerryАй бұрын

  @@lebraun12345 Yes the clamps can be removed, the hardware is M8x20

• 
  @lebraun12345Ай бұрын

  Where did you source these lights from? I would love to get some! Also, can I put in my own custom gobos?

• 
  @TheatricallyJerryАй бұрын

  @@lebraun12345 Yes the S711 Buddha has a slot and lock gobo system to accept glass gobos. You can customize them through gobo vendors. I have a video showing V-Show's slot and lock system here: kzread.info/dash/bejne/p3yX1sxmYMrcfqQ.htmlsi=82_kdINlbpKItDk4 The S711 has a 23mm outer dimension gobo with a 17mm inner dimension. They are marked as OD/ID

• 
  @TheatricallyJerryАй бұрын

  @@lebraun12345 You can purchase them through my good friend V-Show Jack at livedou.com/

• 
  @lebraun12345Ай бұрын

  @@TheatricallyJerry thanks so much!!

• 
  @TheatricallyJerryАй бұрын

  @@lebraun12345 My pleasure! Thank for supporting my channel! More to come!

• 
  @lovedrumandbassАй бұрын

  have u got the link for this item?

• 
  @TheatricallyJerryАй бұрын

  @@lovedrumandbass share.temu.com/PaTWcg1q47A

• 
  @user-bm8ys3pd6rАй бұрын

  Can’t even get mine to power on.

• 
  @TheatricallyJerryАй бұрын

  @@user-bm8ys3pd6r you hold down the power button on the wireless remote and then hit the button once on the fog machine. If it's not turning on at all the 18650 is dead or needs charged. Sometimes the 18650 will die if left uncharged for a long period of time. They can be brought back to life by using a 18650 battery charger not the charger built into the FILMOG.

• 
  @rickgiliam931Ай бұрын

  The light on the wall of the Becen at the 10 degree angle looks bigger (wider) than the Shehds light at 15 degrees, why is that?

• 
  @TheatricallyJerryАй бұрын

  The camera exposure is why it looks bigger.

• 
  @bellacheng4911Ай бұрын

  good video,jerry

• 
  @TheatricallyJerryАй бұрын

  Thank you dear 🙏 I enjoy making great videos with alot of information for my viewers and customers.

• 
  @oletro7850Ай бұрын

  Would like to see you review Color Imagination GRAND 280C

• 
  @TheatricallyJerryАй бұрын

  I would love to! Maybe suggest to them that you would like to see a review of the 280C by @TheatricallyJerry and see if they are interested.

• 
  @gabet37542 ай бұрын

  What’s this for?

• 
  @TheatricallyJerry2 ай бұрын

  So the Artnet node has eight dmx-512 3-pin connectors on the back and I want to access them from the front so I created a pass or feed through. The Artnet node converts a single Artnet 4 signal and properly addresses each of the eight universes contained in each of the dmx ports on the back. When you mount a node to a flight case the ports are on the back and are hard to access so it's better to access them from the front.

• 
  @Hunterbonnar2 ай бұрын

  Will this hold the DMx value if it is disconnected??? I had the old vshow model and it didn’t do that

• 
  @TheatricallyJerry2 ай бұрын

  Yes, it holds it dmx value if powers lost there's actually a option to change how you want it to respond on the new one.

• 
  @Hunterbonnar2 ай бұрын

  @@TheatricallyJerry thank gosh. I returned the old model right when I revived it because of that. Thanks for confirming! Just purchased it!

• 
  @TheatricallyJerry2 ай бұрын

  @@Hunterbonnar The new model is much better in many ways, although I miss the twist dial

• 
  @Hunterbonnar2 ай бұрын

  @@TheatricallyJerry I see that, I’m exited!! I the twist dial was a very quick way to get around the menus however I would take a real ArtNet node functionality any day. The old model I had just did not hold dmx packets unless something was being sent constantly and it was really not good. I was about to buy a different brand of ArtNet node until I saw they updated the design. I wasn’t going to purchase unless I knew it was a legit node which is how I found your vid :). I’ll make a video on it as well.

• 
  @TheatricallyJerry2 ай бұрын

  @@Hunterbonnar it definetly takes Artnet and sends it to the 8 ports. The dmx ports can also be set as either in or out. There's also two ethernet or ethercon connectors as well. It works for what I use it for which is to control 4096 channels of DMX for stage.

• 
  @lokmanjl97972 ай бұрын

  Woww... Nice. Went you to review bee eye 19x15w k10

• 
  @TheatricallyJerry2 ай бұрын

  Tell them to send me one and I'll review it 😁

• 
  @alexman6492 ай бұрын

  You got your s711 lucky guy! :p Did they give it to you or offered a rebate?

• 
  @TheatricallyJerry2 ай бұрын

  I purchase most if not all of my equipment unless otherwise noted. Thanks for being excited about this fixture, the reviews going to be great.

• 
  @lokmanjl97972 ай бұрын

  🔥🔥🔥

• 
  @alexman6492 ай бұрын

  That’s what i tought. I did not see a beam here. Glad i bought the s712 for the true zoom!

• 
  @TheatricallyJerry2 ай бұрын

  The zoom is fine it's just not as wide on the wide end like with the S712 they are two different fixtures and ones much cheaper. It is however a perfect match with the S712 if you want to compliment each other. Thanks for the info.

• 
  @alexman6492 ай бұрын

  @@TheatricallyJerry would it be possible for you to film the zoom of the s716?

• 
  @TheatricallyJerry2 ай бұрын

  Absolutely, stay tuned I release a short on its Zoom capabilities.

• 
  @TheatricallyJerry2 ай бұрын

  @@alexman649 if you go to the 36 minute mark, I do go over the zoom. It's a 16-bit linear zoom.

• 
  @lokmanjl97972 ай бұрын

  Can you share about b-eye k10 19x15w. Thanks

• 
  @TheatricallyJerry2 ай бұрын

  I would love to, However, V-Show hasn't given me any units to review. Maybe they will soon?

• 
  @lokmanjl97972 ай бұрын

  @@TheatricallyJerry thank

• 
  @alexman6492 ай бұрын

  Please release part 2 already! I wanna see it in action. Im curious to see what the beam looks like. 6 degrees isnt that tight but i think there are beam reducers gobos on it to make it tighter? I bought 2 s712 already!

• 
  @TheatricallyJerry2 ай бұрын

  Part Two will release tomorrow, you'll love the beam and Gobos on this one! Stay tuned

• 
  @TheatricallyJerry2 ай бұрын

  A 6 degree beam angle is extremely tight for a 3 in 1. There are static Gobos that can make it even smaller as well as reducers for open or the circular beam.

• 
  @DD23-13 ай бұрын

  I mean it makes sense that it shows each battery charge cause not all batteries are same and its good to know which one is good and which one isnt! I think its amazing! I dont know why I went with the Lensgo hand held smoker... I mean I looked on Amazon and that one popped up first and I had already ordered it but than later on I saw this one and it reminds me of the Genie that costs 700 dollars and to be honest I like this ulanzi one much better. Its more sophisticated and I even think its built nicer! It def looks nicer and its only a 100 which is just as much as I paid for the lensgo cause the lensgo was on sale. Normaly its 128 but I actually paid 90 for it so im gonna return it and get this one instead. I really really like this one! The lensgo's tank is also leaking and I dont like that at all. Im assuming this tank is solid and isnt leaking im hoping but it just looks nicer and better built! Maybe you can tell me if you had issues with the tank leaking before I order one! Thanks!

• 
  @TheatricallyJerry3 ай бұрын

  Zero tank leaks, I have had the tank filled for over two months now and it has spilled a drop. The tanks are real glass and metal lids with a rubber stopper to fill the fog solution.

• 
  @TheatricallyJerry3 ай бұрын

  It kind of makes sense and kind of doesn't. I mean I could have lived with just one battery percentage that averaged both batteries or a flashing symbol to tell you a battery is bad. They could have used that Real Estate for other information like the voltage going to the atomizer or incorporating a sensor to tell you how much fluid is left in the tank. But I get what you are saying.

• 
  @DD23-13 ай бұрын

  @@TheatricallyJerry Yeah the one I bought also has a glas tank with metal top and bottom but for some reason I dont think its that good even though it looks extremely solid. I like the Ulanzi one much better!

• 
  @TheatricallyJerry3 ай бұрын

  You have to either have the images already on a laptop or PC and put them on a USB drive or make your own. The console will not automatically generate images, there's none stored on board the controller. Then you have to manually assign them.

• 
  @27Kfoottball3 ай бұрын

  Yes I did it but still can not

• 
  @TheatricallyJerry3 ай бұрын

  ​@@27Kfoottball Do you have the latest firmware? They released it in April

• 
  @27Kfoottball3 ай бұрын

  Yes why my console not input image My console is Victory 3

• 
  @TheatricallyJerry3 ай бұрын

  Is the USB drive formatted correctly? It's supposed to be FAT32 or it won't work. The system is based off Linux and it can't handle NTFS. You need to be updated to the latest firmware to make sure everything is running smoothly.

• 
  @27Kfoottball3 ай бұрын

  How many pictures did you upload to the videographer?

• 
  @TheatricallyJerry3 ай бұрын

  I don't know what you're asking? I'm sorry

• 
  @27Kfoottball3 ай бұрын

  @@TheatricallyJerry I want to ask you how about your console input image? I want to know How to upload an image ok?

• 
  @27Kfoottball3 ай бұрын

  @@TheatricallyJerry can you upload video ok?

• 
  @TheatricallyJerry3 ай бұрын

  @@27Kfoottball kzread.info/dash/bejne/eZed16mHl7bMeso.htmlsi=irDnmtK2ml-4OP7S

• 
  @ianali103 ай бұрын

  Can you add some HAze to these and show us what it looks like?

• 
  @ianali103 ай бұрын

  Thanks for doing these vids!

• 
  @TheatricallyJerry3 ай бұрын

  The pleasure is mine, thanks for subscribing!

• 
  @studioatlanta3 ай бұрын

  Mine Broke in the first 5 minutes. I usually love Ulanzi products, but this one I had no luck with!

• 
  @TheatricallyJerry3 ай бұрын

  I'm sorry to hear this, maybe a bad batch? Mines still going strong. What broke on it?

• 
  @studioatlanta3 ай бұрын

  @@TheatricallyJerry Atomizer I believe it's called. Whatever holds the fluid.. I already sent ti back. I usually love Ulanzi items, and I understand no one is perfect. It isn't a big deal.

• 
  @lokmanjl97973 ай бұрын

  Can you share about gobo, prism cmy, and zoom

• 
  @TheatricallyJerry3 ай бұрын

  It's already up: kzread.info/dash/bejne/e5hmrZSnpdubaNo.htmlsi=kzdXWwJZU2n5PY-X Have a look😊

• 
  @lokmanjl97973 ай бұрын

  Nice

• 
  @TheatricallyJerry3 ай бұрын

  Thanks

• 
  @stephenhernandez44033 ай бұрын

  Awesome review very detailed thank you so much. Does the wash light come with totem? That’s where the wash light only stays in front of you.

• 
  @TheatricallyJerry3 ай бұрын

  I'm not sure what you are referring to. Can you explain more? Thanks

• 
  @lokmanjl97973 ай бұрын

  Nice...can share more about this model

• 
  @TheatricallyJerry3 ай бұрын

  Later this week I release part Two and part THREE that goes over the entire light fixture In-Depth review.

• 
  @lokmanjl97973 ай бұрын

  Nice. Thanks for sharing. What next?🔥

• 
  @TheatricallyJerry3 ай бұрын

  I do believe sometime next week I recieve a new unit to review from Becen so stay tuned to my channel for a full review on their latest light fixtures. I also have a review coming up this week featuring a 450w light.

• 
  @lokmanjl97973 ай бұрын

  @@TheatricallyJerry so nice....waiting new light

• 
  @tomythedj3 ай бұрын

  Hello , can you please explain how to program function key to blackout? Tnx

• 
  @TheatricallyJerry3 ай бұрын

  Press setup and then console manage button. The option to set the master faders function key to blackout is available under console manage. You also need to update to the latest firmware for this to take effect.

• 
  @tomythedj3 ай бұрын

  @@TheatricallyJerry I actually have a Fos designer 2048 console, which is identical to Code victory 3. I don't know who copied who ;) I have the latest available firmware 3.2.7 and under the master options I have: grandmaster and speed, so it confuses me a bit. Thank you very much for your answer, and I'm also wondering if you know if there are any significant differences between these two consoles?

• 
  @TheatricallyJerry3 ай бұрын

  @tomythedj Yes CODE makes one version and other manufacturers silk screen their name over it. Very common.

• 
  @TheatricallyJerry3 ай бұрын

  No difference, same console

• 
  @tomythedj3 ай бұрын

  Hi, I have another question if you can help me. I have the entire first page of faders programmed. When I program each subsequent page and leave the fader on it active, when returning to the first page, when I lower that same fader, what was programmed on the other page turns off. Do you know if it is possible to program it in such a way that the fader remains active until I physically lower it on another page

• 
  @lokmanjl97973 ай бұрын

  Nice...this model have how many channel mode? Can sharing

• 
  @TheatricallyJerry3 ай бұрын

  14 Channel Mode or 24 Channel Mode.

• 
  @lokmanjl97973 ай бұрын

  @@TheatricallyJerry can you make video for 24channel mode what the different 14channel mode control

• 
  @TheatricallyJerry3 ай бұрын

  @lokmanjl9797 Absolutely I can!

• 
  @TheatricallyJerry3 ай бұрын

  kzread.info/dash/bejne/fnifu6egpaubdpc.htmlsi=JPqpV0gpqTmODEo1

• 
  @lokmanjl97974 ай бұрын

  Nice...thank sharing

• 
  @TheatricallyJerry4 ай бұрын

  My pleasure 🙏 thank you for watching!

• 
  @gamingwithtom28044 ай бұрын

  How to set macro shows

• 
  @TheatricallyJerry4 ай бұрын

  To record a macro show you need to have the timecode window open. It's available when you select a empty workspace window. Once open there's a button on the lower left of the timecode window that says New. Once selected a option will show up displaying the show number and mode of the show. You can select it and choose from three timecode options: Internal Clock -MIDI MTC or Internal Music. After you select the timecode mode, hit apply. Then you press the record button and start using faders and your presets, whatever you press on the console is recorded automatically in the Macro show. Once finished hit release or clear and the record button again. The show can now be played back by pressing the play button. I can also make a video tutorial if that interests you as recording Macro Shows is more of a intermediate tutorial.

• 
  @gamingwithtom28044 ай бұрын

  Thanks bro❤❤

• 
  @TheatricallyJerry4 ай бұрын

  @gamingwithtom2804 My pleasure!

• 
  @lozarmusic4 ай бұрын

  Perfect I was thinking about this

• 
  @TheatricallyJerry4 ай бұрын

  😊

• 
  @Kennnnyy__4 ай бұрын

  I have some garbage chinese moving heads that have a dead psu, how would I go about finding a replacement component?

• 
  @TheatricallyJerry4 ай бұрын

  You do realize most of the components on moving head lights are made in China right, so I'm not sure why it needs pointed out. Also LED drivers are notorious for going out including the PSU. Even american light companies get their components from overseas they are just assembled here... That aside, you can get components by opening the fixture, looking at the PSU and finding the manufacturers name or the model of the PSU and googling the name.

• 
  @Kennnnyy__4 ай бұрын

  ​@@TheatricallyJerry They're offbrand knockoffs and not very good. Thanks for hte advice nonetheless