Пікірлер

• 
  @ohboy779015 күн бұрын

  what cricut model is that? what print and cut software do you use ? thanks!

• 
  @AnteUpGraphics15 күн бұрын

  It’s an explore air 2 cricut. I just used the cricut software.

• 
  @ohboy779015 күн бұрын

  thats awesome

• 
  @AnteUpGraphics15 күн бұрын

  It’s definitely one of my favorite types of htv.

• 
  @ohboy779015 күн бұрын

  what kind of printing is this? sublimation?

• 
  @AnteUpGraphics15 күн бұрын

  It’s just an inkjet printer.

• 
  @sheilajenkins912121 күн бұрын

  Thank you

• 
  @AnteUpGraphics21 күн бұрын

  You’re welcome!

• 
  @lalrohluachhangte639927 күн бұрын

  Is it Sublimation paper?

• 
  @AnteUpGraphics26 күн бұрын

  No. It’s heat transfer paper with inkjet ink.

• 
  @abukarali4Ай бұрын

  What kind of paper did you use to print and what ink did you use bro

• 
  @AnteUpGraphics27 күн бұрын

  It’s 3g heat transfer paper with the ink that came with the printer.

• 
  @alexacosta6480Ай бұрын

  hola Ana. he visto muchos de tus tutoriales, los cuales me han sido de mucha ayuda.de verdad TE FELICITO... Quisiera que hicieras un tutorial de como escanear una imagen para luego cortarla en Cameo 4, puesto que he buscado la forma de hacerlo y aun no lo he podido conseguir. gracias. Saludos desde COLOMBIA

• 
  @AnteUpGraphics27 күн бұрын

  I’ll see about getting a video made on how to do that.

• 
  @ufoquilter86Ай бұрын

  How did you get the grid on the background?

• 
  @AnteUpGraphics27 күн бұрын

  In the page set up panel. You can change the grid to how you like it.

• 
  @derkhaag4414Ай бұрын

  What a worthless program. It should not be this difficult to do.

• 
  @AnteUpGraphicsАй бұрын

  It’s not difficult if you know what you are doing. You just have to learn the program.

• 
  @XhiyeАй бұрын

  I want to know more about that 'Brother Printer' and the paper used to print the design. Thanks.

• 
  @AnteUpGraphicsАй бұрын

  The printer I used in the video was an epson 7710. It’s since been discontinued. I made the video on a computer that didn’t have the epson 7710 hooked up to it. That’s why it showed that I’m the screen recording. I switched to my laptop to finish the video and print to the epson 7710 printer. The paper I used was 3g jet opaque heat transfer paper. anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @karaneal6069Ай бұрын

  These videos are great. How do you get the red lines to disappear once you curve and off set.?

• 
  @AnteUpGraphicsАй бұрын

  You mean the red line around the edge of the image?

• 
  @angelamayfield881Ай бұрын

  MY KYLE & AMY LOVE

• 
  @AnteUpGraphicsАй бұрын

  Angie!!!!!!

• 
  @arielbarriga6932 ай бұрын

  What kind of material I need for screen printing . That will go to cameo

• 
  @AnteUpGraphicsАй бұрын

  Cameo is a vinyl cutter. You want to make a screen with vinyl?

• 
  @martinjrsalazar70892 ай бұрын

  Was that simulation print ?

• 
  @AnteUpGraphics2 ай бұрын

  No. It’s inkjet.

• 
  @SnorlaxAlot2 ай бұрын

  love the design what kind of heat transfer material did you use? :)

• 
  @AnteUpGraphics2 ай бұрын

  We used 3g heat transfer paper anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @donnagiblin11722 ай бұрын

  How did you get all the yellow, pink and blue to come off in one group? How do I get to group by color is I guess my question. Thank you

• 
  @adrianfierro8702 ай бұрын

  How long would you say this last in the sun ?

• 
  @AnteUpGraphics2 ай бұрын

  Since this is inkjet it doesn’t have as long of life as if it was printed with ecosolvent ink. But I would guess 3-6 months before it starts to fade.

• 
  @miniaques3 ай бұрын

  Looks amazing

• 
  @AnteUpGraphics2 ай бұрын

  I agree!

• 
  @sonjaguymon40073 ай бұрын

  What product were you using for your leprechaun?

• 
  @AnteUpGraphics3 ай бұрын

  3g heat transfer paper. anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @user-wt8fl1py7f3 ай бұрын

  Thank you for sharing, will be trying this weekend !! Curious, what font is that?

• 
  @AnteUpGraphics2 ай бұрын

  It’s called Marker Felt. Sorry it took so long to get back to you.

• 
  @dedafmi4194 ай бұрын

  thanks

• 
  @AnteUpGraphics4 ай бұрын

  You're welcome!

• 
  @friskosnatch34394 ай бұрын

  I neet to know what type of epson printer machine is that one?

• 
  @AnteUpGraphics4 ай бұрын

  It’s an epson 7710. But. It’s been discontinued. I recommend getting an epson ecotank.

• 
  @jenjencruz50114 ай бұрын

  what paper you use?

• 
  @AnteUpGraphics4 ай бұрын

  3g heat transfer paper.

• 
  @stonefly71584 ай бұрын

  Can you do car window decals the same way or how do you go about doing them with a printer if you can so ink doesn’t come off?

• 
  @AnteUpGraphics4 ай бұрын

  You can with the same process with sticker vinyl to make stickers. But inkjet ink will fade in the sun.

• 
  @walidsallat57924 ай бұрын

  Can i Ask you the name of papier ؟

• 
  @AnteUpGraphics4 ай бұрын

  3g heat transfer paper anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @elaineramos92574 ай бұрын

  How does it look in the dark? Does it sparkle? Or is it another type of vinyl that sparkles in the dark because that is what I am looking for.

• 
  @AnteUpGraphics4 ай бұрын

  It definitely needs light to hit it for it to sparkle. It does not glow or sparkle naturally

• 
  @pennycrosby57704 ай бұрын

  Awesome video!

• 
  @AnteUpGraphics4 ай бұрын

  Thanks!

• 
  @komirtv19494 ай бұрын

  Can you use a cameo 3 printer ?

• 
  @AnteUpGraphics4 ай бұрын

  Yes! The software is the same.

• 
  @komirtv19494 ай бұрын

  @@AnteUpGraphics Thank you so much 🏆

• 
  @AnteUpGraphics4 ай бұрын

  You’re welcome. Let me know if you have any other questions.

• 
  @komirtv19494 ай бұрын

  @@AnteUpGraphics Hey when it says restrictions marks ? That means it cannot print the logo ?

• 
  @AnteUpGraphics4 ай бұрын

  Do you mean registration marks?

• 
  @komirtv19494 ай бұрын

  What kind of paper did you use to print on your epson printer ? And can you use (IRON ON TRANSFER PAPER)?

• 
  @AnteUpGraphics4 ай бұрын

  Heat transfer paper. Also called iron on transfer paper. anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @komirtv19494 ай бұрын

  @@AnteUpGraphics Thank you so much 🏆

• 
  @AnteUpGraphics4 ай бұрын

  You’re welcome

• 
  @komirtv19494 ай бұрын

  I need a little clarification, so you print the image first using your printer , next you loaded the image with the cutting mat . And started cutting??

• 
  @AnteUpGraphics4 ай бұрын

  Yes. That’s correct. You print to your printer from the silhouette studio software. Then you load it into the silhouette to cut it.

• 
  @favcrypto11145 ай бұрын

  thannks ADAM SANDLER!!!!!!!!!!!!!!

• 
  @AnteUpGraphics5 ай бұрын

  You’re welcome DAVID SPADE!!!!!!

• 
  @KentariasWxrld5 ай бұрын

  The comments let me know ive come up on the right video!

• 
  @AnteUpGraphics5 ай бұрын

  Let me know if you have any questions. I’m happy to help!

• 
  @guytrinarine54175 ай бұрын

  Hi I am trying to cute a king play card but it has black red and white what color of vinyl do I use and how do about getting. All the colors printed

• 
  @AnteUpGraphics5 ай бұрын

  You we need black. Red. And white vinyl. Then cut each color separately. Then apply each color.

• 
  @prescapt5 ай бұрын

  Is there a method to precisely cut out an existing drawing? For instance, if my child made me a drawing and I wish to cut out its silhouette accurately, can I "scan" it into the Cameo 4 for precise cutting?

• 
  @AnteUpGraphics5 ай бұрын

  Scan it. Upload it into silhouette then trace it to make the cutlines. Then you can print and cut it

• 
  @prescapt5 ай бұрын

  @@AnteUpGraphics thanks!!

• 
  @roxymac97495 ай бұрын

  What paper did u use to print?

• 
  @AnteUpGraphics5 ай бұрын

  3g heat transfer paper anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @Cemantha1146 ай бұрын

  I had one upgraded edition of silhoutte and only had to pay a little more to upgrade to business and I found a coupon! But it came out perfectly and I didn’t ruin a Lululemon jack!!

• 
  @AnteUpGraphics6 ай бұрын

  Awesome!! So happy to hear it worked out.

• 
  @cemg35156 ай бұрын

  Thanks! I got it done... and it worked out perfectly!!!!

• 
  @AnteUpGraphics6 ай бұрын

  Excellent!

• 
  @adashofus6 ай бұрын

  What printer are you using to print this image on vinyl?

• 
  @AnteUpGraphics6 ай бұрын

  It’s an epson 7710

• 
  @israeltrujillo64746 ай бұрын

  Thank you 🙏🏽

• 
  @AnteUpGraphics6 ай бұрын

  You are so welcome

• 
  @mborsic946 ай бұрын

  Hi, Great video! One question though, about the printer. Does it have to be some specific printer that is able to do prints on this kind of paper or that should be possible on every regular "office" printer? Thanks!

• 
  @AnteUpGraphics6 ай бұрын

  This is just a regular printer. Nothing fancy.

• 
  @TherealDJGNius6 ай бұрын

  When i double click it gives me dots to edit and not the greent box plus sign?

• 
  @AnteUpGraphics6 ай бұрын

  It only works with text. If that is happening with text, then you most likely converted the words to lines and would need to retype the letters.

• 
  @KirinDigitalArt6 ай бұрын

  What settings do you use for the cutter?

• 
  @amiahdrake46346 ай бұрын

  Hi there! What paper do you use???

• 
  @AnteUpGraphics6 ай бұрын

  I used 3g jet opaque heat transfer paper. anteupgraphicsupply.com/3g-jet-opaque-heat-transfer-paper-8-5x11-sheet-dark-fabrics/

• 
  @dwella52576 ай бұрын

  Thank you so much 3yrs later and your still helpful looking forward to watching more of your videos

• 
  @AnteUpGraphics6 ай бұрын

  Glad to hear it!

• 
  @debiesetiadi83326 ай бұрын

  Hi, thank you for the clear tutorial. Can you cut half of 8.5x11 paper using cameo?

• 
  @AnteUpGraphics6 ай бұрын

  You could. But it might be difficult to cut the paper in half exactly.

• 
  @debiesetiadi83326 ай бұрын

  @@AnteUpGraphics can you make tutorial?

• 
  @Jenessakeesee6 ай бұрын

  3 minutes for an ad to watch isn't worth it.

• 
  @AnteUpGraphics6 ай бұрын

  I don’t set the ads the run on KZread. You could try talking to google about it.

• 
  @nataliaabrams69036 ай бұрын

  Thank you for this video! I just got my Cameo 4. Do you need an specific ink for the printer? Or the regular one works?

• 
  @AnteUpGraphics6 ай бұрын

  The regular ink that comes with it works perfect.

• 
  @FoEverKingCoopa6 ай бұрын

  Ok so if I have a logo can I just print it from the silhouette machine without a printer??

• 
  @AnteUpGraphics6 ай бұрын

  You can cut it out of htv with the silhouette.

• 
  @FoEverKingCoopa6 ай бұрын

  @@AnteUpGraphics ok but what if the logo is different colors??

• 
  @aussierednecksinger287 ай бұрын

  I honestly wouldn't have cut the armpit by hand and saved all this time. 😅😊

• 
  @AnteUpGraphics7 ай бұрын

  I’m not cutting anything by hand. I like my cuts to be precise.

• 
  @ruthanndeline69317 ай бұрын

  Thank you for being so precise on explaining the process, very easy to understand. Thanks for sharing.

• 
  @AnteUpGraphics7 ай бұрын

  You are so welcome!