Пікірлер

• 
  @ronsmith3218 күн бұрын

  How large of a mesquite can you pull up with this? I'd love to see a demonstration video of that...

• 
  @silverrussell1978Ай бұрын

  What cutter would be best suited for a Takeuchi TL8R2 high flow machine?

• 
  @Trucker4281Ай бұрын

  What flow is the standard flow?

• 
  @silverrussell1978Ай бұрын

  Surprised your not showcasing the IDT Woodchuck disc mulcher

• 
  @karenheartoriginal3783Ай бұрын

  So fun to watch a channel doing work in our own backyard! Not sure I’ve seen a disc mulcher before, wow!

• 
  @karenheartoriginal3783Ай бұрын

  What a great surprise to have your channel pop up on my feed. Finally a KZread from our home turf! Sure wish you could take down the brush & small trees from the lot across the street… then we’d actually have a view of the lake again!!

• 
  @shareurtube2 ай бұрын

  Jak se mas.

• 
  @sccolbert3 ай бұрын

  I love you guys, but I would twist that puller into a noodle (granted, I run large frame track machines). I think you need a few different weight-classes of pullers. This one is probably fine for 9-10k and less machines, but the big machines these days are really lifting (12k+ breakout forces). I cracked every critical weld on a 2500lb puller that was all T1 steel (granted it was probably all short-circuit MIG welded. Dual shield MIG would have faired better), but this was a premium-brand attachment. There's so much opportunity in the attachment space to knock it out of the park on quality, but it requires targeting weight classes of machines, and advising customers on what is appropriate for their machine.

• 
  @kingranchlampasas3 ай бұрын

  What are the flow requirements for this cutter? Your website doesn't seem to say.......

• 
  @idigtexas7143 ай бұрын

  17-30 GPM

• 
  @jonreeves39933 ай бұрын

  Way to slow to be practical

• 
  @ammonjackson16263 ай бұрын

  😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

• 
  @benniebarrow3484 ай бұрын

  That wad of trees was leaning into the machine and then on it . Had the machine been on the opposite side it could have hit all the trees low that would then fall away from that beast and it could have just mowed them to shreds.quickly. Disc mulchers are bad A but be sure no one is near them on the outside. So explosive with debris to the point of dangerous.

• 
  @shareurtube4 ай бұрын

  Made in the USA. Well that is nice for a change.

• 
  @SteelWolf135 ай бұрын

  Need to have a claw that grabs a post from a magazine moves it into "pole-sition" and then you can pile drive it. Or a track way magazine that as you pull away it auto feeds in the next post.

• 
  @4MRanch5 ай бұрын

  We have a 450 may look at getting a 750

• 
  @pigslayer1066 ай бұрын

  make the economy 78" root grapple for $1250 again please. that was a great deal

• 
  @genewilliams74976 ай бұрын

  Nice head for sure! BUT….. The wrong tool for the job in my opinion…. To cover ground/acres. I would use a D6K LGP dozer and burn pit all the material….

• 
  @johnkemp4370Ай бұрын

  Be nice to afford a D6

• 
  @cedarbusterstx6 ай бұрын

  Awesome Product 🤙🏼

• 
  @johnkemp43706 ай бұрын

  I see these on many skid steers. Ever sell one to a wheel loader owner. Case 321/ jcb220? 75 hp wheeloaders?

• 
  @kdm21004 ай бұрын

  I've got one on order and gonna throw it on a Kubota ssv75 will make a video when it comes in

• 
  @richardsolberg40476 ай бұрын

  Smaller version of what the WPA use to clear big trees from power lines .. wood chip makers .

• 
  @cliffscott28166 ай бұрын

  i watch a couple of other channels that use a Fecon, it gets the job done.

• 
  @ericwiltz658410 ай бұрын

  Curious about skid steer rock pickers to be used in the Hill Country. Do you have any experience? Not looking for a rock bucket. Thank you, Eric Harper, TX

• 
  @jeffmayeux169210 ай бұрын

  Glad to see your business growing Mr. Tom. Do you have fabrication shops in both states now?

• 
  @idigtexas71410 ай бұрын

  Thank you sir. Yes, we have about 47,000 sq ft in OK (production) and 6,000 sq ft in TX (R&D). Both facilities are expanding capacity week to week 💪👍

• 
  @miaria914811 ай бұрын

  Does this work on Texas Mesquite?

• 
  @idigtexas71411 ай бұрын

  Check out the Barracuda: idigtexas.com/product-category/skid-steer-attachments/grubbers-pullers/

• 
  @Pastaman350 Жыл бұрын

  You need a hot link in your description to get to your web site.

• 
  @idigtexas7146 ай бұрын

  ...DONE! THX!

• 
  @jphickory522 Жыл бұрын

  Do you know what the minimum practical HP and hydraulic flow requirement is to efficiently run the puller on a skidloader?

• 
  @jonmatlock277 Жыл бұрын

  Awesome grapple!

• 
  @richardharris7714 Жыл бұрын

  How much did it cost you ?

• 
  @DarinRaymond Жыл бұрын

  Any suppliers in Canada?

• 
  @idigtexas714 Жыл бұрын

  No sir, not at this time..

• 
  @LONNIEWALKER22 Жыл бұрын

  Great man, and great company!

• 
  @hardyfence Жыл бұрын

  11:06 Hope your insurance company never sees the last few minutes of this. 😂

• 
  @michaelmeehan776 Жыл бұрын

  Very nice

• 
  @bigtimepimpin666 Жыл бұрын

  Did you ever run into.any rocks?

• 
  @PawPaws_Place Жыл бұрын

  What about making one with a Bobcat x-change mount for an e42 excavator.?

• 
  @idigtexas714 Жыл бұрын

  We will have all excavator options soon sir

• 
  @idigtexas714 Жыл бұрын

  These X-Change mounts are now available on www.idigtexas.com

• 
  @SuperSmoker04 Жыл бұрын

  Is there protection in front of cylinders?

• 
  @TimberTramp Жыл бұрын

  What mulcher do you recommend for heavier materials and stumps, soft wood in PNW…?

• 
  @lostrivercentralidaho3467 Жыл бұрын

  Good products! Wish I had them back in the day building allotment fence across central Idaho. Did it the old fashioned way with youth labor and horses…. Broken down and many surgeries later I still enjoy building a fine fence, doing it smarter not harder as you lads do. I especially love the safety training at the end! Boys in the fencing industry know how to make $hitty work fun! Keep it up fellas.

• 
  @sccolbert Жыл бұрын

  Can I option one with 3.5" cylinders?

• 
  @idigtexas714 Жыл бұрын

  Jeez, we can do anything but it’s like my wife says: it just costs money $. We build our cylinders in-house from scratch, they are 100% best on market.

• 
  @sccolbert Жыл бұрын

  Congrats on the success!

• 
  @idigtexas714 Жыл бұрын

  Thank you so much Chris!!!

• 
  @pigslayer106 Жыл бұрын

  Can you please make the 1250$ 78" economy root grapple that you used to offer. i bought one a couple years ago and it was the best purchace ive ever made for the price. i used it nonstop in the hill country and it worked fine. hoses got destroyed alot but i added guards. then it got stolen. please make more of them. i used them on a s650 and t76 and it did great. only complaint was it didnt open very much to grab stuff.

• 
  @smartstuff2buy Жыл бұрын

  Wear safety glasses

• 
  @normahardie8395 Жыл бұрын

  How bout yaupon?

• 
  @idigtexas714 Жыл бұрын

  We use the Terrorizor for Yaupon. Works FANTASTIC!

• 
  @2Ryled Жыл бұрын

  After a rain is the best time. Much easier to pull up

• 
  @Jestersplayland2 жыл бұрын

  Great machine, does anyone run these from front-end loader mounts on their tractor? (Assuming hydraulics exist)

• 
  @idigtexas7142 жыл бұрын

  Absolutely, but requires “quick attach”

• 
  @lorianne6312 жыл бұрын

  I live up near the Edwards Plateau - Leakey/Camp Wood area. We have A LOT of rock. Do you know of anyone who has tested the 450 driver in or near this area? I'm seriously interested in getting one IF it can drive posts around here. I know sometimes, there are solid shelves of stone. Do you use a rock hammer when you run into one of those?

• 
  @Halupka52 жыл бұрын

  Was this a home made attachment or retail purchase? If bought, where from?

• 
  @idigtexas7142 жыл бұрын

  idigtexas.com/product/mesquiter-mesquiter-xl/

• 
  @brennonmyers42262 жыл бұрын

  Wish I could get a mulcher😥

• 
  @JH257802 жыл бұрын

  I have been very happy with my offset 450 driver.

• 
  @Sir_Loin_2 жыл бұрын

  The ending was the best!

• 
  @Shednanigans2 жыл бұрын

  Good stuff ! I’m hoping to get some implements from you guys before the year is up !