We aim to assist a wide audience through the creation of high-quality videos, designed to guide individuals in their projects or simply inspire and entertain. As we continually evolve, some of our earlier videos may have audio imperfections. Your understanding is appreciated as we strive for excellence. Your feedback and comments are invaluable in fostering community improvement and collaboration. Thank you!
Пікірлер
Thank you 👍
Really helpful
Thanks a bunch. I have to do a repair on a sectional that I didn't put together and this info will be very helpful!
Glad it helped!
can my LB power recliner speed be adjusted? It's powerful slow.
Not that I’m aware of
I would like to see how you thread needles when starting. Do you knot the thread?
Yes, I go through the eye and knot it once
I'd be concerned with faults in Assembly or disassembly going wrong... Can't do it my self nor can I trust anyone in my country to do it even if they claim they can ... They're not well Educated Nor trained for this task or dealing with Pianos 😢 Even Tuners and Techs here do their job by traid or experience (Trial and error) Not by Education and adequate training.
Intersting, thanks for the input
A 60 gallon tank is over 200 litres. That's one hell of a tank. That's huge. There's no way that's portable. You're talking about having a permanent fixture in your workshop. Also, if it's going to knock out over 14cfm then you can't run it on a standard 240v domestic system so you need a proper workshop 3 phase system. And they have to be specially installed - at great expense.
What I use does not require 3 phase and it handles the blaster just fine. And it’s definitely not a mobile/portable setup, which hopefully I didn’t lead anyone to believe that
A good solution for when a kid jumps on it and brakes the springs it is called a good old-fashion azzz whoopn
Agreed :)
Thank you! My wife told me the handle wasn't working a few minutes ago and it ended up being the bolt loose. Thanks for the video! It helped.
Glad it helped!
Thanks for sharing this great information it was very useful 😊
Glad it was helpful!
Does the record player or the radio work? I have a similar piece and would love to get that working again if you have any tips?
It does work, but I had no hand in that. I usually research a professional record player repair near me for help
Thank you!!!!!!!!!!!! 🎉
Glad it helped!!
Excellent video!
Thank you very much!
Any idea where I can find discontinued parts? Only had my sofa a short time and thwy have already discountined the recliner mechanism that is all bent up and not working right.
eBay. Those parts still exist on their new models. They typically don’t change the mechanism design, but they don’t know how to figure that out for you unfortunately
Best video on this topic
Thank you!
Where do you buy parts to convert to power recliner?
eBay, recliner-handles.com
I have a kid with a condition that causes her to get sick fairly often. We have almost this exact recliner. She vomited in it this weekend. Do you have any recommendations on how best to get it clean? We steam cleaned it to start with, but I feel like we aren't getting all the way down into it. Thanks!
That’s the route I would have gone. The foam may need to come out and be steam cleaned as well
Thanks a lot for putting this up. My spring mechanism came out and I couldn’t figure out how to put that back in. It was really helpful. Cheers !
My recliner mechanism works but wont lock
Glad it helped
Video on putting springs back in place after repairing front wood frame on a recliner
🙌
Is there a way to tighten the back reclining mechanism? I have a Cheers brand manual glider recliner loveseat that won't stay reclined. The foot rest will stay up but the back constantly comes back into the sitting position from reclining because its so loose. I love the recliner but that part is so annoying. Constantly fight it and pushing back against the back of the chair to stay in the reclining position.
Most of them don’t have any adjustments. You can tighten the KD brackets. You might look into replacing the springs with ones with a different tension
@@the323vlog4 it doesn't have springs for the back of the chair, just the footrest so I'm not sure if a whole different mechanism will fix it. I wish they had springs in the rear of the chair for the back rest. Any ideas? I love the chair but this is irritating. I have to climb clear up on the back of the chair once I get it reclined to try to keep it in place but if I breath the chair goes back to the sitting position.
I have an Ashely manual recliner, model 7528, that will not stay in the upright position. I will be setting in it and all of a sudden it goes into the reclining position. To get it back to the upright position I flip the recliner on it's side push the mechanism into the upright position. Last night it even went into the reclining position with no one setting in it. Do you have any idea how to fix it?
Sounds like a tension issue. Maybe the spring is too much tension not allowing It to lock in place correctly. I’d also check to make sure the footrest isn’t interfering with the arm frames
@@the323vlog4 Is there anyway to adjust the tension? I ended up putting a couple of nylon wire ties around the frame to hold it place.
I have a nicoletti set of couches and 2 of the arm frames have lost all the fluff in them. How do I fix as easily as possible
It’s hard to tell without looking at them. I always start with inspecting. I open up the dust cover of necessary and see if the arm is accessible. Sometimes there is zipper access and other times there is not
I need ur instagram i want to show you my problem please
I squirted vinegar rather then steam and it worked super easy And your vid is too darn fast. Why in the world would you do that? No way am I liking or subscribing
I have slower more in depth ones
Thank you, good sir 🎉
Very welcome
All three of my mason theatre recliners work, but the usb ports don't work anymore. Can you instruct me how to fix it? Thank you.
I would replace the whole port
Hey there. We have some older louvered bifold doors with a lot of latex paint that’s hard to sand off because of the louvers. Would soda blasting be good and what grit?
I don’t hardly use mine for latex paint removal. Unless it’s in terrible shape(the paint) I don’t think it would come off very easily
¿Will the soda blaster remove paint from a wood service?
I wouldn’t expect So. It doesn’t work well on paints
@the323vlog4 thank you
Found this on the web... Yes, soda blasting can remove paint from many surfaces, including cars, brick, and wood. Soda blasting is a non-abrasive, environmentally friendly method that uses compressed air to shoot sodium bicarbonate (baking soda) at the surface being cleaned. When the baking soda particles hit the paint, they explode and disrupt the surface without damaging the underlying material. Soda blasting can also remove other coatings, dirt, grease, and stains.
@@the323vlog4 found this info on the web... Yes, soda blasting can remove paint from many surfaces, including cars, brick, and wood. Soda blasting is a non-abrasive, environmentally friendly method that uses compressed air to shoot sodium bicarbonate (baking soda) at the surface being cleaned. When the baking soda particles hit the paint, they explode and disrupt the surface without damaging the underlying material. Soda blasting can also remove other coatings, dirt, grease, and stains.
Thank YOU so much for sharing your knowledge!! I hope you can help me out here, i have a simple recliner that worked perfect until it didnt some day. When i push the up or down button on the switch the motor works very slowly like in little steps of 1 cm each time then it stops for 3 seconds and another cm. What could it be? When i push the switch, the green light on the power supply box fades to weak but does not go out entirely. Bad power supply? Thanks in advance.. Best regards
I’d start by making sure no wiring was damaged, then trouble shoot the switch, transformer and finally the motor.
Great video! How does the price of the soda medium compare to sanding discs, etc.? Do you find it’s a big time saver but more expensive to operate?
It costs a little more to operate for sure but saves so much time comparatively . My labor is much more expensive than the cost of goods don’t makes sense
Yeah I’m definitely doing something wrong. I’m burning through soda media and getting no where.
You may have a finish that is still very resilient. It work a lot better on worn out antique finishes
Enjoyed the video, I have a flexsteel power recliner that has a broken frame part in the recliner mechanism. Trying to figure out what to do with it and found your video. Do you know if there is a resource for ordering those individual frame components? Worse case I may dismantle and attach a piece of metal bad reconnecting the two broken sides. Thanks for the video
I have only seen them sold as full mechanisms by vendors. That being said, eBay would be the best resource to find them being parted out.
My recliner power works but the problem is that it won’t stay closed; as soon as I release the close button, or just stand up after it’s closed, it reclines on its own. Any suggestions other than replacing the switch?
Sounds like something may be hooked up incorrectly, Like it’s getting constant power
I was going to get this to clean stovetop grates. You think it’ll work on burnt on grease in tough corners?
Good question, I have no idea! If it were me, I’d spray it with degreaser and then blast it
Your concept looks great and thank you for that. Can you please tell me if that would be the case for my 1986 MBZ 300sdl front seat. The recliner rattles and does not go backwards when I push the button. Please help me!
Not quite sure. I’d have to evaluate it
What are you pushing it with? What compressor?
I use a 80 gallon ingersol rand
Does it need an air dryer?
Thank you ❤❤ great job
Thanks!
Meaning to ask how long does a 50 pound bag of soda last you trying to budget how many projects I can do with one bag thanks in advance
I’d say around an hour or so of blast time
Finally pulled mine out of the box and put it together so excited to use it for intricate design on the coffee table legs that cannot be sanded
Hope it goes well!
Hollo my question is what is the voltage on the power supply.. i got some of a garage sale with no power supply...thank you.
I usually just buy a generic one on Amazon and they work fine
What brand of chair is this ? It looks nice ! Can this be done with La Z Boy ?
I would imagine so, those are well Designed. I can’t remember on This one. Probably rooms to go or Ashley’s
How do I get the bracket replaced if the locking piece has broken?
amzn.to/3WZ15wj
holy cow thats my sofa. thanks for the great video.
Glad you liked it!
Beautiful !!! ❤
Thanks!
How to repair chair that leans to one side.
You could check Out our video on how to straighten a mechanism or mechanism replacement
My Okin Deltadrive lift recliner lifts fine, seats fine, legrest extends, but back does not recline. In my research, I'm thinking a broken plastic spindle nut for the actuator. Prices have ranged online from $1 USD to $40 USD for a plastic nut, and no metal ones available (like there are for the forkend that my brother replaced). I found confusing printed instructions, but no videos on how to replace the nut. Right now, I just sit in it upright with my legs extended (not the best nap position...;-)) Anybody know of any videos on "non-reclining" recliners?
Wiooow
What 60gal were you going to get, there are a few of that size? Please add a link if it's no trouble =) I'm saving to buy! I also would like to buy from tractor supply.
I got the Ingersol Rand. www.tractorsupply.com/tsc/product/ingersoll-rand-5-hp-single-stage-twin-cylinder-pro-air-compressor-60-gal
Hi Boone, I’m writing from Australia and needing to find all similar products but from Aussie suppliers … so the information is brilliant, I do have a kinda odd question, how long do you find a 25 kilo bag of soda lasts, as in how many projects approx. Thank you - you are v inspiring
My 50 lb bags usually last around 60-90 minutes of continuous spraying.
@@the323vlog4 thank you, makes it quite an expensive way to remove old paint at $100 per bag …. maybe should just use for difficult to reach areas
My power to the head rest works but the legs part
Could be the switch, loose/damaged wiring or possibly the motor