When your chocolate bar gets stuck in the vending machine
@petedembroski66229 күн бұрын
A 15/16 wrench does wonders. I tried the pipe wrench also, can’t get a grip. Those brass clean out nuts should only be hand tightened
@Rusticsewing16 күн бұрын
looks how feeling frigid feels
@blamm534822 күн бұрын
Just tap the edge, also best to have goggles not glasses when breaking tempered glass.
@IamMiggyV24 күн бұрын
or gonna pay for that !
@nooblamingo9185Ай бұрын
dude you could have given that to a another person that needed it
@Digitqlhdh1Ай бұрын
Why not just slide it out
@LucasartworkАй бұрын
Boss said to scrap it. We could have probably saved it but didn’t think anyone would want it. But it turned out that we did sell the smaller pieces.
@Digitqlhdh1Ай бұрын
@@Lucasartwork could have gave you 50 a panel
@yashrajsingh1306Ай бұрын
Thanks for your tip it helped me to fix my window and kitchen counter top. 🙂
@LucasartworkАй бұрын
Hey thanks! Glad it could help. I hope it works for a long time.
@wrong2528Ай бұрын
Mask up or breath glass dust.
@Anthony-kc4joАй бұрын
I dreamed of broken glasses and it means : some people are talking shit about you. Who's that? 😂😂😂 B come out ill know anyway
@eduardosarmiento8985Ай бұрын
X echar culpa a lo guey 😊
@stevrgrsАй бұрын
Why would you waste all that glass??
@liverdav66Ай бұрын
It looked animated
@SQUiDW4RDOАй бұрын
Looks exactly like crystal meth
@majorleaguegrowingАй бұрын
my brother worked at a glass factory and had a piece of glass embedded in the side of his eye for a long time
@firstsonofthesea7938Ай бұрын
skill issue
@vincenthoward79702 ай бұрын
Stone cold stone cold stone cold!!!!! (JR voice)
@mattcleveland87592 ай бұрын
Would be good for a rage session. What Construction Company do you work for?
@JavedIqbal-zk5qm2 ай бұрын
"Glass shatters" and here comes austin
@jharding322 ай бұрын
Why not a square socket and an impact?
@Lucasartwork2 ай бұрын
That’s a good idea. I didn’t think of it at the time. It might have worked but the plug was kind of corroded in there too. Thanks
@paulruklic88552 ай бұрын
What a waste!
@firstsonofthesea7938Ай бұрын
That is a nice panel why not sell it
@abhaykumar6192 ай бұрын
Cant the glass be cut instead of shattering?
@Lucasartwork2 ай бұрын
No this type of glass can’t be re-cut to a different size. It has all that tension in there. It could’ve been removed as a full piece like a lot of people have said, but it was very large and heavy so we decided just to scrap this one.
@augustinus4433 ай бұрын
I want a date with that guy he is so hot
@gravity72083 ай бұрын
could have reused for used tape
@BrightthgirB3 ай бұрын
Respirator would help your lungs pal
@ChristopherTrybus3 ай бұрын
awesome video thanks!. do you have any links to the replacement bearings or replacement parts you found or any part numbers? im beginning the same project can't wait to get to work on it.
@Lucasartwork3 ай бұрын
Hey thanks! I appreciate it. Yeah I got them from EBay. Here’s the link www.ebay.com/itm/223335476277 Good luck with your restoration work. These are definitely a good solid lathes and I’m a big fan of the old Delta Rockwell tools. . I have seen a modern comparable tool for thousands but of course the old ones don’t have speed control. But metal castings and construction of it are really good. Thanks again!
@ChristopherTrybus3 ай бұрын
@@Lucasartwork thanks. Mine came with a 3 phase motor and I think I’m going to convert it. I know it’s expensive and not original but the lathe body is a super solid platform and I’m not against a little customization to get it to work the way I need it to.
@Lucasartwork3 ай бұрын
@@ChristopherTrybus I look forward to seeing the restoration if you post it. I saw you’re short on it! It looks a little rusty but I’m sure it will come out great. And it was a good deal. I got mine for about $180.
@kurtshomliv17983 ай бұрын
Wrong tools dude! I respect the effort though!!
@sarahjulianne29543 ай бұрын
I love coworkers. Everybody gets the official training and then just legitimately breaks shit together. Lol
@SammyGDude3 ай бұрын
To those saying dont repurpose it; just get people to sign a waiver to come on site and demo as freelancers. People will suck that Sh!t up fast and then u dont have to pay for dump.
@SingingblissofRajat3 ай бұрын
Just put a paper or tape on it before hitting.
@afikkusan3 ай бұрын
STONE COLD! STONE COLD! STONE COLD!
@kevineverson32083 ай бұрын
I got a good suggestion. You can buy a drane bladder for 15 bucks and just hooke it to tye a garden hose and place it in the main hole. Let it run for ten minites and it should clear out ur sewer system as long as its not major. No need to drill or unbolt anything. It litterally takes 11 minutes.
@Lucasartwork3 ай бұрын
Hey thanks for the suggestion. I might have to try that sometime! I’m not sure it would work in my case but it would for a lot of clogs. Mine was like cement hard pack and took poking through. Anyway, thanks for letting me know! I will keep that in mind for the next time.
@KnightStandard3 ай бұрын
And the answer is...yes you can! Ha! Nice!
@willcash163 ай бұрын
Dude grabbed his lip right after hahaha. What an idiot.
@lilaudrey83 ай бұрын
You should make a shelf about 6 or 7 inches from bottom legs! turned out Beautiful tho
@Lucasartwork3 ай бұрын
Yeah, I was actually thinking about rails at one point, but the shelf is a good idea. That would look good. Maybe I’ll try that on the next one. Thanks for commenting!
@lilaudrey83 ай бұрын
@@Lucasartwork It is Beautiful reguardless! Love it!
@nickfritz86923 ай бұрын
very informative. I just did the same thing with the lathe that I inherited from my father. Similar to yours, mine is a Duro production Lathe A3056. I was able to actually find the original bearings that were used 50 years ago. Thanks for sharing!
@Lucasartwork3 ай бұрын
Hey thanks, That’s awesome, I’m glad it helped. I’ll have to look that up. Is it the same as the Delta Rockwell? How did you find original bearings? I still have the original ones from mine. They were probably fine but I didn’t really know at the time. I have them soaking in oil now for future reference. Thanks again, I appreciate it.
@mattkennedy9533 ай бұрын
I bet the clean up guy loves him drop cloth
@brunowolfe91723 ай бұрын
This guy is lucky none of the glass flew into his eyes around his glasses. NEVER do this without complete wrap eye protection. Aside from the mess…..
@glassdealglobal3 ай бұрын
We are manufacturing glass products
@glassdealglobal3 ай бұрын
Not Tempered laminated glass
@christianszwerinski30413 ай бұрын
Cool
@detroitmidunkin21383 ай бұрын
Breaks glass Me: Waiting for Stone Cold to walk out
@interfaceonly3 ай бұрын
Picking out the glass shard from his chin 🤔
@michaelmoss59763 ай бұрын
I think you mean, "shoddy".
@Lucasartwork3 ай бұрын
Ahh, right. Thank you! That is what I meant. I must have thought it was like it sounded.
@marcomedina4634 ай бұрын
You have to hit the corner bud
@Theguyfromgortag4 ай бұрын
“JESSE, WE GOTTA COOK”
@tried864629 күн бұрын
Breaking bad❌ Breaking glass✅
@weaponizedmath43694 ай бұрын
Sad sad sad ....this couldn't be bought or sold to anyone 😢 instead a landfill it is
@cauliflowerpower414 ай бұрын
My guy.....no face shield wow
@stevrgrsАй бұрын
He’s clearly an idiot. That glass is not cheap and he’s out here smashing it to pieces :(
@phungphan22454 ай бұрын
Tempered glass is so amazing. It's like one giant prince rupert droplet.
Пікірлер
That's how shattered were Dua Lipa's dreams 😅
HENSHIN
When your chocolate bar gets stuck in the vending machine
A 15/16 wrench does wonders. I tried the pipe wrench also, can’t get a grip. Those brass clean out nuts should only be hand tightened
looks how feeling frigid feels
Just tap the edge, also best to have goggles not glasses when breaking tempered glass.
or gonna pay for that !
dude you could have given that to a another person that needed it
Why not just slide it out
Boss said to scrap it. We could have probably saved it but didn’t think anyone would want it. But it turned out that we did sell the smaller pieces.
@@Lucasartwork could have gave you 50 a panel
Thanks for your tip it helped me to fix my window and kitchen counter top. 🙂
Hey thanks! Glad it could help. I hope it works for a long time.
Mask up or breath glass dust.
I dreamed of broken glasses and it means : some people are talking shit about you. Who's that? 😂😂😂 B come out ill know anyway
X echar culpa a lo guey 😊
Why would you waste all that glass??
It looked animated
Looks exactly like crystal meth
my brother worked at a glass factory and had a piece of glass embedded in the side of his eye for a long time
skill issue
Stone cold stone cold stone cold!!!!! (JR voice)
Would be good for a rage session. What Construction Company do you work for?
"Glass shatters" and here comes austin
Why not a square socket and an impact?
That’s a good idea. I didn’t think of it at the time. It might have worked but the plug was kind of corroded in there too. Thanks
What a waste!
That is a nice panel why not sell it
Cant the glass be cut instead of shattering?
No this type of glass can’t be re-cut to a different size. It has all that tension in there. It could’ve been removed as a full piece like a lot of people have said, but it was very large and heavy so we decided just to scrap this one.
I want a date with that guy he is so hot
could have reused for used tape
Respirator would help your lungs pal
awesome video thanks!. do you have any links to the replacement bearings or replacement parts you found or any part numbers? im beginning the same project can't wait to get to work on it.
Hey thanks! I appreciate it. Yeah I got them from EBay. Here’s the link www.ebay.com/itm/223335476277 Good luck with your restoration work. These are definitely a good solid lathes and I’m a big fan of the old Delta Rockwell tools. . I have seen a modern comparable tool for thousands but of course the old ones don’t have speed control. But metal castings and construction of it are really good. Thanks again!
@@Lucasartwork thanks. Mine came with a 3 phase motor and I think I’m going to convert it. I know it’s expensive and not original but the lathe body is a super solid platform and I’m not against a little customization to get it to work the way I need it to.
@@ChristopherTrybus I look forward to seeing the restoration if you post it. I saw you’re short on it! It looks a little rusty but I’m sure it will come out great. And it was a good deal. I got mine for about $180.
Wrong tools dude! I respect the effort though!!
I love coworkers. Everybody gets the official training and then just legitimately breaks shit together. Lol
To those saying dont repurpose it; just get people to sign a waiver to come on site and demo as freelancers. People will suck that Sh!t up fast and then u dont have to pay for dump.
Just put a paper or tape on it before hitting.
STONE COLD! STONE COLD! STONE COLD!
I got a good suggestion. You can buy a drane bladder for 15 bucks and just hooke it to tye a garden hose and place it in the main hole. Let it run for ten minites and it should clear out ur sewer system as long as its not major. No need to drill or unbolt anything. It litterally takes 11 minutes.
Hey thanks for the suggestion. I might have to try that sometime! I’m not sure it would work in my case but it would for a lot of clogs. Mine was like cement hard pack and took poking through. Anyway, thanks for letting me know! I will keep that in mind for the next time.
And the answer is...yes you can! Ha! Nice!
Dude grabbed his lip right after hahaha. What an idiot.
You should make a shelf about 6 or 7 inches from bottom legs! turned out Beautiful tho
Yeah, I was actually thinking about rails at one point, but the shelf is a good idea. That would look good. Maybe I’ll try that on the next one. Thanks for commenting!
@@Lucasartwork It is Beautiful reguardless! Love it!
very informative. I just did the same thing with the lathe that I inherited from my father. Similar to yours, mine is a Duro production Lathe A3056. I was able to actually find the original bearings that were used 50 years ago. Thanks for sharing!
Hey thanks, That’s awesome, I’m glad it helped. I’ll have to look that up. Is it the same as the Delta Rockwell? How did you find original bearings? I still have the original ones from mine. They were probably fine but I didn’t really know at the time. I have them soaking in oil now for future reference. Thanks again, I appreciate it.
I bet the clean up guy loves him drop cloth
This guy is lucky none of the glass flew into his eyes around his glasses. NEVER do this without complete wrap eye protection. Aside from the mess…..
We are manufacturing glass products
Not Tempered laminated glass
Cool
Breaks glass Me: Waiting for Stone Cold to walk out
Picking out the glass shard from his chin 🤔
I think you mean, "shoddy".
Ahh, right. Thank you! That is what I meant. I must have thought it was like it sounded.
You have to hit the corner bud
“JESSE, WE GOTTA COOK”
Breaking bad❌ Breaking glass✅
Sad sad sad ....this couldn't be bought or sold to anyone 😢 instead a landfill it is
My guy.....no face shield wow
He’s clearly an idiot. That glass is not cheap and he’s out here smashing it to pieces :(
Tempered glass is so amazing. It's like one giant prince rupert droplet.