Officially, The World's No.1 Sea-Doo Dealer.
FOLLOW US //
JSW POWERSPORTS //
jswpowersports.com.au
facebook.com/jswpowersports
instagram.com/jswpowersports
SEA FOX BOATS //
seafoxboats.com.au
facebook.com/seafoxboatsaustralia
instagram.com/seafoxboatsaustralia
MALIBU & AXIS BOATS //
malibuboatsgoldcoast.com.au
JET SKI WAREHOUSE //
jetskiwarehouse.com.au
Пікірлер
Wouldn't own another SeaFox boat if you paid me! Worst customer service on warranty hull claim . Run, run fast.
overpriced crap
My dream boat to fishing...i hope i can have it...
Hem pengecatan kapal membutuhkan keahlian khusus untuk menghasilkan karya yg sempurna...from nayaa16 channel indonesia
Every boat factory seems to think they are like Rolls-Royce and charge accordingly. Meanwhile, people want boats that can get them places fast, provide overnight accommodations and not cost as much as fucking Private jet.
true disconnect but hey, they sell too,,,,
Nicest looking Pyle's of shit on the water
bueno
Junk boats.
I am speaking from pakistan i know the work of fiber boats
ขชขฟผ ช
How much
Shoebox hull/deck joint and screws? talk about the weakest possible hull/deck joint...
That's literally how two piece hulls are put together.
@@monster-pq7ln Whether its a 2 piece or 1 piece hull has nothing to do with the hull/deck joint type. Shoebox hul/deck joints are the weakest method of making this connection and are a hallmark of poor quality. the most common ( and strongest) method is an inward turned hull flange with the deck adhered AND through bolted. Its also the most expensive and laborious method. Screwing the joint together is just reckless!!
@@pierremitham2964 cool story. You should notify the hundreds of manufacturers that they are doing it wrong.
@@monster-pq7ln They know but are choosing lower labour costs as a priority (seems to be a powerboat thing...). Look at all the big builders. Jeanneau, Beneteau, Swan, Hanse, Catalina, Bavaria all use the inward turned flange method (walk around a boat yard and you'll see 99% are not shoe box assembly). Remember its costs more in time, labour and tooling to build a hull and deck for the inward turned flange/deck interface. And it cost more in labour to assemble as it takes 2 to bolt the deck down vs. some goo and screws!
@@pierremitham2964 sounds good
if they were built that well i wouldn't see videos of fully sunken sea fox boats. unsinkable means not on the bottom of the water way. sea fox is very sinkable.
Where are the videos? I love sunken boats
muito bom curt
Super duper....
That’s our exact boat
How is it holding up? Considering on buying one.
Looks like our Redfish mated with our sea trout
Hi I just got a quick question, I was looking at getting the 206 but now I've seen this I might have to change. Im just wondering what the actual advantage of moving up in size by 2 feet or even 4 feet on he 248 will accomplish?
Carolina Flair
Like you email address please thank you 😊 love boat
I love this boat
The onboard workout convinced me
Oh so they are only checked, and then double checked? No, gotta have a boat that was at least triple checked. Because I like to bitch about everything. Yes, I am bored, why do you ask?
I worked there from 2013 to 2015. I sprayed gel coat. My shift started at 7 PM. I didn't leave until about 8:30 AM. What the video doesn't show is prepping the molds for gel coat application. It was a very satisfying job. Oh and the stringer are made of flotation foam and wrapped with dry glass cloth so it can be wetted out during lamination.
Hello! I have a question for you, how do they do a 2 color Hull?
Think of it this way, you want a yellow hull? We tape and plastic off where the white goes. We spray the color then we remove the the plastic and tape then spray white.
I know this is old but I've got to know. What's it like wearing all that PPE all day? Did you get hot? What do you do if you take a break? Did you take it off?
Where the 2005 built the same
Wax Wax Wax.....
I’m going to Teresa Creek this Easter and I love it the place it is so awesome it’s always so busy at East
When loot knight wasnpoop
Still using wood for stringers, all set with a sea fox boat
Lqlllllllll
I love the fishing set up but I’m a little spooked by what I read and hear about Sea-Doo reliability and hull issues. I fish by myself a lot and whatever rig I get needs to be extremely reliable. Is this really an issue? Or just the rumor mill?
If you want reliability get a yamaha,seadoo never seam to get reliabilty issues sorted,im not bias i repair skis as a hobby more seadoos than any other brand
Great little machine, eh? I know I'm loving mine :-)
Puerto Rico Jetski Fishing rate it for me out 10 please, im about to go to the bank and get one . Is it reliable ,cause i saw a vid where the bilge pump seal pops out and it starts to sink . So im 50% ight now .thank you
@@mrscarface6438 A Fish Pro? Sinking? Please share the link so I can check it out. I've had mine since January and have trolled offshore with 100% confidence. Can stuff break? Yeah. Even $150K Contenders have stuff break, that's why you take care of your equipment and maintain the crap out of it. Always inspect your vessel...know your machine...do walk arounds...get in it with a flashlight...always be suspicious but if it passes then trust it. For the money, I think the FishPro is one hell of a ride. Powerful, stable, roomy, capable, economical to operate and a quick wash after a day out. It definitely rocks. Now, is a twin engine 29' center console better? Yeah...but I run this thing for a dollar basically. :-)
Hello, It's Mikołaj from NTD Television. This video is great: kzread.info/dash/bejne/h4KoyqinqJTZn8o.html Our mission is to uplift the world through sharing Truth, Hope and Humanity. We would like to upload it on our media pages and further details available in this link: goo.gl/WHMfJQ. Please drop me an email at [email protected] if you are the copyright owner. Thank you very much. This is our website: www.ntd.tv/about/
One problem: he described the first thing sprayed into the mold as "an 18 to 21 millimeter coat of isophthalic gel coat." That should be "18 to 21 mil" - a mil is a thousandth of an inch. 18 millimeters is 3/4" and I really don't think anyone wants that much gel coat on his boat - especially the people at the boat factory who would have to buy the 100 gallons of gel coat (at about $150 per gallon) it would take to do it.
I had the same question, mistake for sure
But would that be nice for the life of the finish lol.I would never buff thorough that. Lol
What are you talking about it is not three quarters of an inch .0018 “to .0021 “ is what he is saying. 18 thousands to 21 thousands for the gel coat.
Donald Hyatt Go back and watch it again. He definitely said millimeter, not mil. Also, it’s .018, not .0018. Massive difference.
Pops Old Boats True, but there’d be about a million dollars worth of gelcoat on one hull. Paint would be better...Hatteras paints their boats, because the Imron they use is more durable than gelcoat.
Gtx limited💪to goo kzread.info/dash/bejne/qZeGsrelXZy0hco.html kzread.info/dash/bejne/dWmFmNyHlpCYoJs.html kzread.info/dash/bejne/ZqOYyJaEiJfaodY.html kzread.info/dash/bejne/jGqO0LGKdrvJXbw.html Подпишись sing up,спасибо большое
cuki
cukipepe
Plastic GRP or FRP boats are tough, all-right...All my aluminum boats had cracks or loose rivets from pounding waves. Attempted steel construction...but couldn't get the weights and power ratios right.
It wasn't until the 1960's that boats started being made of Fiberglass.. Boaters were sceptically of Plastic Boats.. Plastics were just starting to become popular in the 60's.. Although, the Chevrolet Corvette was made from Fiberglass since their inception in the early 50's.. but, Corvettes had been made from Carbon Fiber for last 10 years.. Boats are next..
Hello iam buy your comapny boat plz send me your company detail.
[email protected]
Thomas, there are quite a few seven-figure yachts made of carbon fiber. There are pros and cons to it - you can get the same strength as fiberglass with half the material, which makes the boat lighter (or, conversely, twice the strength for the same weight), the boat is stiffer if it's made of CF, and "I've got a carbon fiber boat" has the same "cool" factor as "I've got a Kevlar boat" did a few years ago. The problems are that the material is five times the price of fiberglass and it ain't goin' down because of the energy it takes to make carbon fiber, the stiffness also means your boat will beat the shit out of you in rough seas (which can be remedied by pumping in a lot of dense foam insulation, which makes the boat heavier), and carbon fiber, unlike fiberglass, gives no warning before it fails. If I had that much money, I would still go with a fiberglass boat.
Merry Christmas
First
That's a pretty big dude.. Hope for me yet...
Does it have lower gear ratio in 4-low than the other Mavericks? Because that is what really makes a rock crawler. That and lockers.
Will you please send one to Memphis tn I have been waiting for two months
It’s about time
I wonder if these would do good at the sand dunes?
Party-of-5 that's what I was wondering myself waiting for the dune review of this trail machine
Ok I just rechecked and it said 28999 msrp.
Michael Lamb yes you are correct I just ordered me one $28.999.99 out of Memphis TN should have it before January lol I hope
I have seen 23999 I believe that's what it cost. I could be wrong
sounds better haha
That is for the x3 turbo base model with 120hp, the x3 xrc turbo R with 172hp is 29,000.
Michael Lamb $28.999.00 just ordered one in Memphis Tn don't know if price is any different where you live or not
Ryan Clark how much was it out the door if you don't mind me asking?
Michael Fantin you got to add 750 for freight 300 for prep it's everything out the door was $36.178.84 out the door I traded my 2016 Yamaha yxz in on it got 9500 for it plus the $500 deposit to get the first one they get equals out 10,000 on trade and I am putting another 5g with it i'm going to finance 15,678 I haven't got it yet but I'll be glad when it comes in really looking forward to it The West Coast dealerships I've already got them I live in Memphis Tennessee it seems like we get everything last lol
love it- how much $$$
In Cali about $31K OTD in season, less off season.
What settings are you running to get such a big surf wave? Are you running factory ballast only or did you add weight? Thanks I really like your colors very clean.
Hi David, We are running the Malibu factory presets along with the standard ballasts! Feel free to email Ryan at [email protected] for further information.
hey like your seadoo good quality can i borrow your seadoo lol jk but really good video and GREAT quality keep it up
good boats 👍
Thanks for posting the video!