Пікірлер

• 
  @ryangonzales67427 күн бұрын

  I'll take two

• 
  @HielscherUltrasonics6 күн бұрын

  @ryangonzales6742 No problem. Please contact us directly at [email protected]. We will be happy to send you a proposal. Please provide some information about your requirements, so that our technical team can suggest the best setup for your project. We hope you like our video! Please follow our channel for more interesting videos. Thank you! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @John-of6ch10 күн бұрын

  Sorry I should have watched the whole video.lol

• 
  @HielscherUltrasonics10 күн бұрын

  @John-of6ch No problem. For mushrooms, ultrasonic extraction is better suited than soxhlet. As explained in the video, in Soxhlet the extracted compounds are exposed to heat in the flask for a long time. That is not good for heat sensitive compounds, because it will cause heat degradation. So you are destroying what you just extracted. With probe sonication on the other hand, you can - break cell walls - Soxhlet does not, and - extract soluble and in soluble compounds - Soxhlet does not extract insoluble compounds Most importantly, ultrasonic probe extraction produces great yields and works at low temperatures, such as -20degC. This preserves heat-sensitive compounds. We are looking forward to working with you on your mushroom extraction process. Please contact us directly! Thank you for viewing our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @John-of6ch10 күн бұрын

  How long of a process is this, lets say I'm extracting mushroom compounds. How will I know when it has extracted the most valuable compounds and will this vary depending on starting materials. Thanks

• 
  @stephenroldan51075 күн бұрын

  8 hrs.. I extract that

• 
  @HielscherUltrasonics5 күн бұрын

  @John-of6ch No problem. For mushrooms, ultrasonic extraction is better suited than soxhlet. As explained in the video, in Soxhlet the extracted compounds are exposed to heat in the flask for a long time. That is not good for heat sensitive compounds, because it will cause heat degradation. So you are destroying what you just extracted. With probe sonication on the other hand, you can - break cell walls - Soxhlet does not, and - extract soluble and in soluble compounds - Soxhlet does not extract insoluble compounds Most importantly, ultrasonic probe extraction produces great yields and works at low temperatures, such as -20degC. This preserves heat-sensitive compounds. We are looking forward to working with you on your mushroom extraction process. Please contact us directly! Thank you for viewing our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @HielscherUltrasonics5 күн бұрын

  @stephenroldan5107 When it comes to extracting compounds from mushrooms, ultrasonic extraction offers several advantages over Soxhlet extraction. Ultrasonic extraction is much faster than Soxhlet. We are talking minutes, not hours, It breaks down cell walls, a capability that Soxhlet extraction lacks, and it efficiently extracts both soluble and insoluble compounds, whereas Soxhlet only extracts soluble ones. Sonication produces great extraction yields. Moreover, ultrasonic probe extraction operates at low temperatures, such as -20°C, which is crucial for preserving heat-sensitive compounds and achieving high yields. We are eager to collaborate with you on optimizing your extraction process. Please feel free to contact us directly. Thank you for watching our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html.

• 
  @trevorhilditch889013 күн бұрын

  question, once extraction is done are you able to heat up to burn off ethanol solvent & be left with just the mushroom extract? our company is interested in using this machine for mushroom extract chocolates

• 
  @HielscherUltrasonics13 күн бұрын

  @trevorhilditch8890 you could just heat and boil off the ethanol, but don’t! Use a vacuum pump at mild temperatures to preserve heat sensitive materials. A rotovap would be the best. Else, just use a sealed flask in warm water and apply a vacuum pump. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @quinsongumbs7120 күн бұрын

  Great video! Can I use a falling film evaporator to separate any impurities and get ASTM rated B100? The UCO feedstock has 2%-3% FFA

• 
  @HielscherUltrasonics20 күн бұрын

  @quinsongumbs71 Yes you can. The advantage of ultrasonic transesterification is the reduction in excess methanol due to the sono-chemical activation of the reaction/catalysis. Therefore you need less evaporation capacity than in a non-ultrasonic reaction. More importantly you need significantly less energy (vacuum and heat) as you need to evaporate significantly less excess methanol. We are looking forward to working with you on your project. Please contact us directly! Thank you for your attention. Subscribe for more updates and professional content: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @Cervin_Suisse28 күн бұрын

  Hello there. Will this efficiently and safely(non altering or destructive) extract both the polysaccharides & triterpenes ? Also if powder is used can the mass be returned to the same phase without loss of those active components ? Thank you.

• 
  @HielscherUltrasonics28 күн бұрын

  @Cervin_Suisse Yes probe sonicators, such as our Hielscher UP100H, UP200Ht or UP400St are very efficient in extracting polysaccharides & triterpenes. The cold extraction preserves sensitive compounds. Please contact us directly. We are looking forward to working with you on your project. Your viewership is invaluable to us. For continued access to our content, please subscribe: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @Cervin_Suisse28 күн бұрын

  @@HielscherUltrasonics Thank you for your reply. What are the prices on those units ? As it is a private project/evaluation I don't want to invest too much at 1st.

• 
  @Cervin_Suisse28 күн бұрын

  @@HielscherUltrasonics I did contact you on your website already.

• 
  @HielscherUltrasonics28 күн бұрын

  @Cervin_Suisse Our technical team will get back to you shortly. Have a nice weekend!

• 
  @Cervin_Suisse28 күн бұрын

  @@HielscherUltrasonics thank you. I wish you a pleasant evening.

• 
  @user-ij1pk6hs8dАй бұрын

  ❤❤

• 
  @HielscherUltrasonicsАй бұрын

  We are glad you like our video. Thank you for viewing our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @dejablueguitarАй бұрын

  Well This looks AMAZING!! Have you tried Kratom with this method??

• 
  @dejablueguitarАй бұрын

  And Wild Lettuce?!

• 
  @HielscherUltrasonicsАй бұрын

  @dejablueguitar 😁 Thanks. Yes, this works for Kratom and all other leaves and botanicals. In fact, we supplied several bigger ultrasonic extraction machines to commercial Kratom extractors. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @HielscherUltrasonicsАй бұрын

  @dejablueguitar How much would you like to extract? Fresh or dried? Please contact us directly ([email protected]). We will be glad to recommend a suitable setup and give advice on the process. We are looking forward to hearing from you!

• 
  @googolplexingАй бұрын

  super interesting. how much does this complete unit cost? I checked out your website and finding out pricing was difficult.

• 
  @HielscherUltrasonicsАй бұрын

  @googolplexing please contact us directly ([email protected]). We make sonicators for commercial use and we are almost entirely B2B. We will be glad to send you a proposal for your requirements. We value your engagement with our content. Stay ahead by subscribing for more professional updates and insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @suiyenАй бұрын

  Hello. Can we make this awesome machine in home?

• 
  @HielscherUltrasonicsАй бұрын

  @suiyen We do have customers that buy our sonicators for home/kitchen use. For small scale projects, we suggest using the UP100H sonicator with 10mm probe. This is very easy to use and compact. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @jovan9724Ай бұрын

  So you're using the S24d14D prob ?? Would you recommand the S24d22D for bigger pass ??

• 
  @HielscherUltrasonicsАй бұрын

  @jovan9724 The 14mm probe has a higher amplitude than the 22mm. The amplitude of the 22mm probe can be enough for nano-emulsions, depending on your formulation. For larger batches, we would recommend using a flow cell in combination with the 14mm probe. By recirculating or running multiple passages through the flow cell, you will get a better result. We will be glad to work with you on your project. Please contact us directly! We hope you like our video! Please follow our channel for more interesting videos. Thank you! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @jovan9724Ай бұрын

  @@HielscherUltrasonics Thanks a lot, new to ultrasonics technologies. Will send you some questions related to process and price asap. Thanks for your time and consideration.

• 
  @HielscherUltrasonicsАй бұрын

  @jovan9724 You are welcome. We are looking forward to working with you!

• 
  @nelsonines776Ай бұрын

  How many kg/tons of olive paste per hour is the system able to process ?

• 
  @HielscherUltrasonicsАй бұрын

  @nelsonines776 This process is fully scalable. Smaller installations start at 1-2 metric tons per hour. Larger installations go up to 30 metric tons per hour. All the systems are designed to run continuously. How much would you like to process? Thank you for watching our video! If you liked this video, please share it with your friends and colleagues. Please subscribe for more videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @marmileson9712Ай бұрын

  Why youtpr coffee look cloudy ....Sr?

• 
  @HielscherUltrasonicsАй бұрын

  @marmileson9721 Ultrasonic cold brew extracts more oil from ground coffee than conventional brewing or cold brewing. This gives a great bold flavor and smooth texture. Your viewership is invaluable to us. For continued access to our content, please subscribe: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @MikeTrieu10 күн бұрын

  Not only is it extracting the oils, it's emulsifying it. You're used to seeing the oils floating to the top of your brew rather than evenly dispersed as colloidal micro droplets, scattering the light differently. I've seen this look in sonicated vinaigrettes, too.

• 
  @HielscherUltrasonics10 күн бұрын

  That is correct. Sonication can make a nice creamy cold brew with great texture and flavor. Thank you for your attention. Subscribe for more updates and professional content: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @glenmarshall8168Ай бұрын

  The price tag, though 😮

• 
  @HielscherUltrasonicsАй бұрын

  Hielscher sonicators are built for years and years of production use and to deliver excellent performance. They are great value for the price. Buy cheap? Buy twice (or more).

• 
  @anupkumarlatharАй бұрын

  Approximate price of yellow colour sonicater in India???

• 
  @HielscherUltrasonicsАй бұрын

  Please send us an email to [email protected]

• 
  @LoversBe1Ай бұрын

  curious how chaga is grinded? can you please share with me how this is acheived? what sort of machine is best? i have a bunch of chaga and also looking into a sonicator. i really want to make the highest quality extracts.

• 
  @HielscherUltrasonicsАй бұрын

  @LoversBe1 You can buy ground Chaga powder. Else, some kitchen blenders work for chunks smaller than 10 millimeters to get to a powder. For highest quality extracts and good yields, get a sonicator! We will be glad to help you with your project. Please contact us directly. Thank you for your attention. Subscribe for more updates and professional content: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @anupkumarlathar2 ай бұрын

  I am from India, do you have any showroom near North India

• 
  @HielscherUltrasonics2 ай бұрын

  @anupkumarlathar We have an Indian distributor near Hyderabad. Alternatively, we will be glad to schedule a video call to show you our equipment. We have a technical lab in Germany, where we could run sonication tests with your material. What is your process? What would you like to sonicate? Please contact us directly, we will be glad to discuss your project and your sonication requirements. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @anupkumarlathar2 ай бұрын

  @@HielscherUltrasonics thank you, soon I will contact you

• 
  @qasemali8582 ай бұрын

  Also diagnosis

• 
  @HielscherUltrasonics2 ай бұрын

  @qasemali858 Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @qasemali8582 ай бұрын

  🎉🐝 products

• 
  @juliocesarposso35592 ай бұрын

  Preço desse equipamento?$$$$$$ prive?

• 
  @HielscherUltrasonics2 ай бұрын

  @juliocesarposso3559: Obrigado pelo seu interesse nos sonicadores Hielscher. Por favor, contacte-nos diretamente (www.hielscher.com/email). Estamos ansiosos por trabalhar consigo no seu processo. Agradecemos o seu interesse nos nossos vídeos. Para se manter atualizado com os nossos conteúdos mais recentes, considere a possibilidade de subscrever: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @Preyhawk812 ай бұрын

  So i can make biodiesel in my sonic cleaner?

• 
  @HielscherUltrasonics2 ай бұрын

  @Preyhawk81 A cleaner doesn’t have the intensity to emulsify the reactants or to activate the chemical reaction. Please contact us directly. We will be happy to discuss your project. Thank you for viewing our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @captainlinsano77392 ай бұрын

  is the same device capable of emulsion or is that something else

• 
  @HielscherUltrasonics2 ай бұрын

  @captainlinsano7739 You can use the same Hielscher sonicator for extraction and emulsification. We will be glad to talk to you about your project and to recommend the suitable sonicator size for your requirements. Please contact us directly ([email protected])!Thank you for your attention. Subscribe for more updates and professional content: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @SoloSp33d2 ай бұрын

  Hello. I would like to ask. If I would want to extract mushrooms, is it better to use soxhlet extraction setup or sonicator? With soxhlet to make water extracts I would need to boil water to get water soluble compounds. With sonicator it is only possible to extract alcohol soluble compounds and I will need to make boiling after also to get water soluble compounds if I want double extraction? Or sonicator can not only make alcohol extraction but water extraction in cold water without boiling too?

• 
  @HielscherUltrasonics2 ай бұрын

  @SoloSp33d When extracting mushrooms, the sonicator is the superior choice over the Soxhlet extraction setup for several reasons. Firstly, the sonicator operates at lower temperatures compared to the Soxhlet, minimizing the risk of thermal degradation of heat-sensitive compounds present in mushrooms. In Soxhlet extraction, the extracted compounds are exposed to heat for a long time in the heated flask. Secondly, the sonicator provides better control over the extraction process, allowing for precise adjustment of parameters such as amplitude, power, temperature, and duration to optimize extraction efficiency. Additionally, the sonicator has a higher capacity, enabling the processing of larger volumes of mushroom material in a shorter time frame. Contrary to the misconception, the sonicator is not limited to alcohol extraction alone. It is capable of extracting both alcohol-soluble and water-soluble compounds from mushrooms, including polysaccharides and other bioactive components. Furthermore, ultrasonic extraction in cold water is possible without the need for boiling, making it a versatile and efficient method for extracting a wide range of compounds from mushrooms. Therefore, the sonicator is the preferred choice for extracting mushrooms due to its ability to operate at lower temperatures, offer better control over the extraction process, and accommodate higher processing capacities. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @sjgx14482 ай бұрын

  This is so cool. Great video

• 
  @HielscherUltrasonics2 ай бұрын

  Thank you 🤗 Thank you for viewing our content. For more insightful videos, we invite you to subscribe to our channel: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @sjgx14482 ай бұрын

  @@HielscherUltrasonics done😊

• 
  @HielscherUltrasonics2 ай бұрын

  👍🏻

• 
  @tudonatural14392 ай бұрын

  Gostaria de adquirir

• 
  @HielscherUltrasonics2 ай бұрын

  @tudonatural1439 Por favor, contacte-nos diretamente ([email protected] ou www.hielscher.com/email.htm). Estamos ansiosos por trabalhar consigo no seu projeto. Obrigado pela vossa atenção. Subscreva para receber mais actualizações e conteúdos profissionais: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @aravindg542 ай бұрын

  Due we required to purify b100 biodiesel or we will get crude biodiesel and need to subject for further distillation to get pure biodiesel b100 of astm and en standards .

• 
  @HielscherUltrasonics2 ай бұрын

  @aravindg54 In producing biodiesel, Hielscher ultrasonic reactors effectively catalyze the transesterification process, enhancing reaction speed and yield. It will contain excess methanol - less than in conventional processing, though. Whether the output meets ASTM and EN standards for B100 biodiesel directly depends on the feedstock quality and the process specifics. Typically, the biodiesel will require further purification or distillation to remove impurities and ensure compliance with these standards. Ensuring the feedstock purity and optimizing the process parameters are crucial steps toward achieving high-quality biodiesel. We hope you like our video! Please follow our channel for more interesting videos. Thank you! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @ameendavid40372 ай бұрын

  Where is the oil?

• 
  @HielscherUltrasonics2 ай бұрын

  @ameendavid4037 through ultrasonic extraction, rosemary cell walls are perforated, facilitating the emulsification or solubilization of oils and lipids into the liquid phase. To separate the oil from this mixture, it is imperative to filter the sonicated mixture to eliminate the solids. Subsequently, employing evaporation techniques, such as utilizing a rotary evaporator, becomes essential to remove water and ethanol from the oil. For the preservation of heat-sensitive materials, it is advisable to implement a strong vacuum and low temperatures during this process step. Following the evaporation process, you will obtain pure Rosemary oil. Thank you for your attention. Subscribe for more updates and professional content: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @ameendavid40372 ай бұрын

  @@HielscherUltrasonics can absolute procured from this process?

• 
  @HielscherUltrasonics2 ай бұрын

  @ameendavid4037 Absolutely. After sonication, use a very fine filter paper (e.g. 1µm) to remove all suspended solids. Then use rotary evaporation at very mild conditions. This may take longer but it will give you a better quality. You can use fresh Rosemary. Any moisture of the fresh material will mix into the liquid phase and be separated during evaporation. Vary the water/solvent ratio, the solvent used, the temperature during sonication and the sonication intensity (amplitude) and duration to optimize your extract quality and yield. Please contact us directly (email) with the quantities you would like to process. We will be glad to assist.

• 
  @jaydenimbriano56902 ай бұрын

  could you not just leave it in the ultrasonic cleaner for twice as long instead and probably get the same result

• 
  @HielscherUltrasonics2 ай бұрын

  @jaydenimbriano5690 Will you cut through steel with your flashlight, if you shine on it for twice as long as with the cutting laser? Time is no substitute for intensity. We appreciate your interest in our videos. To stay updated with our latest content, please consider subscribing: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @jaydenimbriano56902 ай бұрын

  @@HielscherUltrasonics I don't think that's really a fair comparison in this case. If you extract mushrooms in alcohol you will extract much more leaving them to soak in 6 weeks then one week with no added intensity

• 
  @HielscherUltrasonics2 ай бұрын

  @jaydenimbriano5690 In the absence of sufficient mechanical stress capable of disrupting cellular structures and emulsifying insoluble elements, the extraction process is limited to the fraction that is soluble in alcohol and capable of diffusing through cell membranes.

• 
  @HielscherUltrasonics2 ай бұрын

  Comparing the cleaning bath to the UP100H probe sonicator is like pitting a kitchen knife against a heavy-duty chainsaw for tree cutting - it's just not a fair match. The cleaning bath simply isn't designed for botanical extraction tasks, especially not for dealing with the robust Chitin-based cell structures found in mushrooms. The cleaning bath is well suitable for cleaning jewelry or even carburetor nozzles, but when it comes to extracting substances from materials like mushrooms, it falls short due to its very limited intensity. Even giving it an extra 30 seconds of sonication time doesn't bridge the gap in effectiveness compared to the UP100H probe sonicator. So, while the cleaning bath has its uses, extracting mushrooms isn't one of them. Thank you for engaging with our video. Enhance your experience by subscribing for more professional insights: 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @mymycocompany2 ай бұрын

  Ive tried to contact you guys about products, and never received a response. How does one contact you through email?

• 
  @HielscherUltrasonics2 ай бұрын

  @mymycocompany We are very sorry and surprised to hear this. How and when did you contact us? We would like to look into this and find out what went wrong. Please email to [email protected] or use the form at www.hielscher.com. Thank you. We are looking forward to working with you.

• 
  @mymycocompany2 ай бұрын

  @HielscherUltrasonics it was a few weeks ago, through the website. I will send a new email this evening when I get home. Thanks for the quick response, much appreciated.

• 
  @HielscherUltrasonics2 ай бұрын

  @mymycocompany Please mention mymycocompany in your email. What email did you use when filling our form back then? Please send this in the email too. We would like to dig into, how your inquiry got lost. Thank you!

• 
  @mymycocompany2 ай бұрын

  @HielscherUltrasonics I might need to apologize. I was just going back through my sent emails and I dontnhave one going out to your company. I must have not sent it or it just didn't get sent. But I have sent one now for sure. I checked the sent box and it shows its in there. Technology sure can be a pain sometimes. Lol But I look forward to your response. Thanks in advance.

• 
  @mymycocompany2 ай бұрын

  @@HielscherUltrasonics Hey, I got your response. Thanks for your help in answering my questions.

• 
  @momsmushroomsjodyfoster57862 ай бұрын

  How is the amount of solvent determined? Thank you, I’m having problems with a batch I think I added too much water to the flask

• 
  @HielscherUltrasonics2 ай бұрын

  @momsmushroomsjodyfoster5786 There are two aspects: 1) The solvent volume should be high enough so that the flask does not run dry when the solvent evaporates and fills the Soxhlet well. The solvent volume should be low enough to allow evaporation. Our suggestion: At the start, fill the Soxhlet well manually with solvent to just below the apex of the siphon and fill the flask to the level of its maximum diameter. 2) Depending on the compound amount to be extracted, you should not oversaturate the solvent in the flask, which would cause separation (e.g. precipitation). If you see oversaturation, use less botanical material in the Soxhlet well. Have you considered ultrasonic extraction as an alternative or add-on to Soxhlet extraction, yet? We will be glad to discuss your extraction requirements. Please contact us directly! Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @momsmushroomsjodyfoster57862 ай бұрын

  Thank you so much for your fast response! It’s difficult finding answers for my questions! But, again please. Should I be adding 250mills of liquid to the a 500mill flask? Because the liquid expands as its heated, correct? I tried adding more than 250 mils of water, and it was disastrous.

• 
  @HielscherUltrasonics2 ай бұрын

  @momsmushroomsjodyfoster5786 Fill the flask to just above the widest diameter. Depending on the volume of your Soxhlet apparatus, you may have to add a little more, if you see the level in the flask falling too low. Make sure that your condenser condenses all water vapor, so that you don't lose water during the process. You see that our Allihn condenser has a very narrow opening on the top to avoid vapors exiting instead of condensing. Use a low coolant temperature on the condenser. The expansion of liquid due to heat is insignificant. Use boiling stones to get smoother boiling in the flask and use medium heat to start slow. Once you have everything under control, you can increase heat in small steps to speed up the process. Alternatively use cold water and sonication and avoid the Soxhlet all-together. In a Soxhlet extraction, the extracted compounds are exposed to heat in the flask for a long time, causing heat degradation. With our sonicators, you can extract at cold temperatures, so that the compounds are not exposed to heat.

• 
  @HielscherUltrasonics2 ай бұрын

  @momsmushroomsjodyfoster5786 You can find a detailed Soxhlet extraction guide at www.hielscher.com/wp-content/uploads/Soxhlet-Extraction-Guide-for-Academic-and-Professional-Domains-Hielscher-Ultrasonics-Germany.pdf

• 
  @momsmushroomsjodyfoster57862 ай бұрын

  Can water be used as a solvent?

• 
  @HielscherUltrasonics2 ай бұрын

  @momsmushroomsjodyfoster5786 Water can be used as a solvent in a Soxhlet extractor, but it will extract water soluble compounds only. Without sonication, the water or solvent will not break cell walls. Therefore, extraction is very slow and incomplete. Hielscher sonicators can extract compounds quickly and efficiently without using a Soxhlet. Please see kzread.info/dash/bejne/lXd8j6iAoq3dmbQ.html for example. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @user-ky6sd6zf1t2 ай бұрын

  Perfection!

• 
  @HielscherUltrasonics2 ай бұрын

  👍🏼

• 
  @aravindg543 ай бұрын

  Do we need a distillation system to get pure biodiesel.

• 
  @HielscherUltrasonics3 ай бұрын

  @aravindg54, Yes, you will need a methanol recovery system (heat + vacuum) to separate excess methanol from the biodiesel. As ultrasonic transesterification reduces the excess methanol significantly, you will save a lot in the methanol recovery. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @arnolddergamer96683 ай бұрын

  i subbed 👍

• 
  @HielscherUltrasonics3 ай бұрын

  😀👍🏻

• 
  @arnolddergamer96683 ай бұрын

  what happens if u touch it?

• 
  @HielscherUltrasonics3 ай бұрын

  @arnolddergamer9668 You must not touch the sonotrode during operation!Touching it lightly would not hurt you. Pressing your finger onto the sonotrode during operation would cause blisters and tissue damage. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @arnolddergamer96683 ай бұрын

  ok, so if i slip, nothind would happen, right? @@HielscherUltrasonics

• 
  @HielscherUltrasonics3 ай бұрын

  @arnolddergamer9668 Please define „slip“! Short contact without any pressure won’t cause any harm! However, for your safety, we state in our manuals, that you must not touch the sonotrode or horn during sonication. So please, don’t!

• 
  @p_peja3 ай бұрын

  does ultrasound assisted extraction damages some beneficial compounds from mushrooms?

• 
  @HielscherUltrasonics3 ай бұрын

  @p_peja Ultrasonic extraction is the most efficient extraction method. You can adjust the sonication intensity on our Hielscher sonicators, to be just intense enough to break the cell structure. In combination with low or ultra low temperatures, this preserves the most mushroom compounds. Thermal extraction on the other hand is less effective in breaking the cell structure and the heat degrades many valuable compounds. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @yurakovalec72923 ай бұрын

  Have you tried to treat with Weedborn CBD products?

• 
  @HielscherUltrasonics3 ай бұрын

  @yurakovalec7292 We have tested so many CBD products, that clients brought to us. Honestly, we would not know, if any of them was Weedborn CBD. If it is CBD, sonication and StuphCorp emulsifier will make a nano-emulsion. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @vhyombhatt39353 ай бұрын

  For mushrooms, is it true that a certain frequency of waves should not be exceeded in the ultrasonic spectrum? if exceeded more than the value, the molecules to be extracted will also be damaged? kindly guide on this

• 
  @HielscherUltrasonics3 ай бұрын

  @whyombhatt3935 Not true! Ultrasonication produces cavitation. Cavitation extracts from the plant. The ultrasonic wavelength is much to long to affect molecules directly. It’s always the cavitation that produces the effects. 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @alexmaster94373 ай бұрын

  And what can you say about contamination of extracts by titanium's particals?

• 
  @HielscherUltrasonics3 ай бұрын

  @alexmaster9437 As any other mechanical process tool, the sonotrode (horn, probe) is subject to wear and tear. The amount of wear depends on many factors, such as sonication intensity and sonic energy per volume sonicated. Our sonotrodes are made of a high quality grade 5 Titanium. The overall wear into the process liquid is typically in the PPM (parts per million) range. Our customers include food, beverage and pharmaceutical manufacturers, that test their products for safety. Also, titanium particles can be separated from the liquid by filtration or centrifugation. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @boozeheister13 ай бұрын

  At what frequency ranges does this equipment work ?

• 
  @HielscherUltrasonics3 ай бұрын

  @boozeheister1 This is a Hielscher UIP2000hdT that can deliver 2000 watts at 20 kilohertz. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @raechardbernard50963 ай бұрын

  can you set the specific frequency that you want on these machines? I am trying to test how Ultrasonic frequency and duration affects a specific fluid sample. for my application, the frequency range is 20kHz to 100kHz and I am also interested in also knowing the Power delivered. how well are these devices suited for my purpose and do you have any recommendations? I need a device to apply the ultrasound at specific frequencies and a set up to tell me the power delivered

• 
  @HielscherUltrasonics3 ай бұрын

  @raechardbernard We make resonant probe-type sonicators. The resonance is determined by the mechanical design. The generator adjusts the driving frequency to this resonance. This is like a pendulum, that has a single frequency dependent on its length. On the other hand, 20-100kHz is all low frequency ultrasonics. We make various devices with distinctive frequencies from 18 to 60 kHz (higher for some specific applications). Frequency (in low frequency ultrasound range), is not a significant influencing factor for liquid processes. Amplitude and liquid pressure are the most important factors. You can adjust the amplitude in a wide range on our sonicators. Our devices work a various liquid pressures. The total and net power delivered to the liquid is shown on the display and recorded to a csv file on the SD card. Please contact us directly to discuss your project. We are happy to assist. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @ASCENDU3 ай бұрын

  For ultrasonic cavitation, you can use this dimensionless number: upload.wikimedia.org/wikipedia/commons/4/4c/Garcia-Atance_number_for_ultrasonic_cavitation.png

• 
  @HielscherUltrasonics3 ай бұрын

  That's all nice - until you add cavitation bubbles and acoustic streaming. With massive cavitation and acoustic streaming, the liquid is a dispersion of void spheres in a liquid, causing reflections and diffraction. Also, the average volume vapor pressure changes. This influences your pressure waves, significantly. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @ASCENDU3 ай бұрын

  For ultrasonic cavitation, you can use this dimensionless number: upload.wikimedia.org/wikipedia/commons/4/4c/Garcia-Atance_number_for_ultrasonic_cavitation.png

• 
  @HielscherUltrasonics3 ай бұрын

  That's all nice - until you add cavitation bubbles and acoustic streaming. With massive cavitation and acoustic streaming, the liquid is a dispersion of void spheres in a liquid, causing reflections and diffraction. Also, the average volume vapor pressure changes. This influences your pressure waves, significantly. Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @Gta_Selection3 ай бұрын

  What is the stuphcorp emulsifier made of?

• 
  @HielscherUltrasonics3 ай бұрын

  @Gta_Selection As far as we know that is a proprietary material. Many of our customers are very happy using StuphCorp emulsifiers for their products. Thanks for watching! Please subscribe to our channel for more interesting videos!

• 
  @Gta_Selection3 ай бұрын

  @@HielscherUltrasonics you did not analyze it yourself?, no info on the certificate of analysis,

• 
  @HielscherUltrasonics3 ай бұрын

  @Gta_Selection: We own a Microtrac Nanoflex DLS, a MicroTrac S3500 LD, MicroTrac S3000 LD and a Nanotrac Wave II DLS for particle size measurements and stability measurements. The Dynamic Light Scattering (DLS) systems have an impressive measurement range of 0.3 nanometers to 10 micrometers. So yes, we measured the nano-emulsion in our technical lab, using the Microtrac Nanoflex DLS in this case. We have many customers, that measure their own emulsions on identical or other measurement systems and cross-reference the measurements with our measurements. Feel free to send us an emulsion sample for a free measurement.

• 
  @Gta_Selection3 ай бұрын

  @@HielscherUltrasonics I was wondering what it contains, are they food safe emulsifiers, lecithin, maltodextrin things like that Would be nice to afford this type of equipment. Have you ever done any experiments with Chelation? I read a little bit about it but don't have the equipment to to experiment

• 
  @HielscherUltrasonics3 ай бұрын

  @Gta_Selection You should contact StuphCorp (www.stuphcorp.com) regarding the Stuph emulsifier range. Their emulsifiers are food safe. Please understand, that we don't sell StuphCorp emulsifiers. We like their products though. We do recommend StuphCorp to almost all of our clients for CBD & THC nano-emulsions, because it works. We cannot say the same about many other proprietary or generic emulsifiers and stabilizers in the market. We tested many emulsifiers - lecithin and maltodextrin included. Clients bring all kinds of emulsifiers to our lab. When it comes to stability, flavor and price/performance, nothing we tested comes even close. Life is too short to waste time and money on stuff that doesn't work.

• 
  @Gta_Selection3 ай бұрын

  It mixes and separates in a few minutes,

• 
  @HielscherUltrasonics3 ай бұрын

  @Gta_Selection Hielscher sonicators are the tool to break droplets into finer droplets - all the way down to a couple of nanometers, if required. Emulsion stability and dispersion stability depends on many factors, such as surfactants used, temperature, volume rations, pH, etc. Ultrasonication helps to distribute the surfactants evenly, to maximize their effect. We will be glad to discuss your emulsification project with you. Please contact us directly! Thanks for watching! Please subscribe to our channel for more interesting videos! 👉 kzread.info/dron/G1xa_8clP9cRlq7kIcWQug.html

• 
  @Gta_Selection3 ай бұрын

  @@HielscherUltrasonics yeah without an emulsifier it won't work, you can use a $30 blender with emulsifiers no need for expensive equipment to bond oil and water, but at high concentration it comes out cloudy the more oil you use

• 
  @HielscherUltrasonics3 ай бұрын

  @Gta_Selection Some emulsions work (= are stable) without emulsifiers, though. This depends on many factors. You: "you can use a $30 blender with emulsifiers" 😂 Sure, you can use whatever you like, just don't expect more than what you paid for. Nano? 🧐 I don't think so!

• 
  @anthonyackerman55563 ай бұрын

  Wouldnt it work if you have the same area of mass as well the same watts?

• 
  @HielscherUltrasonics3 ай бұрын

  @anthonyackerman5556 The difference between probe type sonication and an ultrasonic cleaning bath is the intensity - the power coupled per surface area. Due the technical design of an ultrasonic bath, the amplitude - this is the mechanical displacement of the surface in contact with the liquid - is limited to approx. 1 micron. Hence, a cleaning tank couples the power across a large surface area at very low intensity. Ultrasonic probes have adjustable amplitudes of up to 100 micron or more. This couples the power using a very small surface at a much higher intensity. The intensity of an ultrasonic bath is much too low to effectively break chitin and cell wall structures. Thanks for watching! Please subscribe to our channel for more interesting videos!

• 
  @homocapensis78544 ай бұрын

  Excelente, cual es el equipo de cavitacion con mayor capacidad, 200 liros, 1000 litros?

• 
  @HielscherUltrasonics4 ай бұрын

  @homocapensis7854 ¡Piense en grande! Nuestros equipos pueden procesar 10000 o incluso 100000 litros por hora. ¿Cuánto desea extraer? ¿En cuánto tiempo desea procesar un lote? Póngase en contacto con nosotros directamente. Nuestro equipo técnico estará encantado de recomendarle la configuración más adecuada. Estaremos encantados de hablar con usted. Gracias por vernos. Suscríbase a nuestro canal para ver más vídeos interesantes.

• 
  @homocapensis78544 ай бұрын

  @@HielscherUltrasonicspor ahora una tonelada, necesitamos dos eauipos.

• 
  @HielscherUltrasonics4 ай бұрын

  @homocapensis7854 No hay problema. Póngase en contacto con nosotros por correo electrónico o formulario web (www.hielscher.com) para que podamos enviarle una oferta adecuada. Muchas gracias.

• 
  @Abricos44404 ай бұрын

  Hi I need make separate veg oil from garbage and water ... Do you have something?

• 
  @HielscherUltrasonics4 ай бұрын

  @Abricos4440 Our sonicators are great for mixing materials and for making stable emulsions. Hence, our sonicators are not a good tool to separate oil from water. However, if you use chemical agents (e.g. flocculants) to assist separation, the sonication will assist this chemical process. Thanks for watching! Please subscribe to our channel for more interesting videos!

• 
  @swedensufal4 ай бұрын

  It will make nice butter/ghee coffee or tea.

• 
  @HielscherUltrasonics4 ай бұрын

  @swedensufal Yes it will. Thanks for watching! Please subscribe to our channel for more interesting videos

• 
  @Here-AndThere4 ай бұрын

  Why does sonication not tear through the coffee filter?

• 
  @HielscherUltrasonics4 ай бұрын

  @Here-AndThere It‘s an intensity thing. This sonotrode has a lower amplitude, enough for extraction but not too destructive for the filter. The beauty of well controlled sonication. Thanks for watching! Please subscribe to our channel for more interesting videos!