I love that Paul is playing in the background 😂 that’s how I did it when I built mine
@braedonnickelson805713 күн бұрын
Definitely doing this to my king ranch ecoboost
@carlmarks6145Ай бұрын
Amazing!!!
@bishop55372 ай бұрын
Putting an ecoboost in that truck is a god damn tragedy. You couldnt find a 5.0 or even a 300 inline six? That truck deserves better...
@24theMoney2 ай бұрын
Love these kind of videos. Just retire want watch all day.
@NOBRAKESRACING482 ай бұрын
LETS GOOO! SO AWESOME TO SEE A VELOCITY POST
@blownaway43713 ай бұрын
Ya look like Bill Burr the comedian! So, did you feel any improvement? Just picked up a T-5 from a '95 S-10. and want to do a K-24 swap..
@andrewthetool3 ай бұрын
Was it worth doing or would you just go with a tkx ?
@Bacongrease004 ай бұрын
How’s it holding up???
@VelocityVideo4 ай бұрын
Good question. It lasted about 4 track days before 3rd gear went out on it. (Our stroker was putting out 550-600hp) rather than our original guess of 500. Since then, I downgraded to a mild 306cid with a TKX. Working great.
@caseyhaner46864 ай бұрын
Nice truck
@street_fighter_mx55 ай бұрын
How much is the upgrade?
@SBS_Auto5 ай бұрын
Should use billet sincro keys and carbon syncro upgrade.
@SBS_Auto5 ай бұрын
Is this the 2.95 first gear?
@chrishansen70045 ай бұрын
Old truck in its natural habitat!
@chrishotrod66035 ай бұрын
Such an amazing clean truck
@billdoherty53325 ай бұрын
Great job 🎉
@allentraylor56595 ай бұрын
Did you upgrade the rear to àn IRS ??
@VelocityVideo5 ай бұрын
No it's a 9" 3.55
@johnconnor67257 ай бұрын
More Great coverage of the event, Thank you ! Why is the USA coverage so lacking and the Mexico non-existent ? ?
@johnconnor67257 ай бұрын
As usual, GREAT coverage ! ! ! Thank you ! ! ! Love watching the World Jet Boats !
@johnconnor67257 ай бұрын
Great race and coverage .
@MalcolmRa8 ай бұрын
GREW UP G.P.
@braedonnickelson80579 ай бұрын
I really am thinking about doing this with my 2012 king ranch ecoboost I think it would be a really cool daily at that point
@CA.papaBear9 ай бұрын
wait, so let me get this straight... I can keep the transmission case and some of the retainers and all I have to do is get a kit like that from G-Force and I can push 500hp out of it? No way... I don't believe it. :0 Is that true man?
@Friedrich-Wilhelm-19809 ай бұрын
let me lead with looks good on the outside BUT well its not really a 1979 anymore is it this is no longer resto mod and is a reskin let's be honest
@joelestrada96659 ай бұрын
Man, that’s my dream truck really good job
@gearbow10 ай бұрын
Great video and company. Your drone operator and editor earned their money with this one!
@jacksimmons389511 ай бұрын
Asshole knew what his jet wash would do to this other boat. Knew damn well if he cut in front of the other boat it would blow it over. Should be banned for life. Could have killed someone!
@pea_dury2000 Жыл бұрын
Once again review the black or blue racing boat because I happen to be looking for a color design for my boat. 🙏🤣
@randysrestoration Жыл бұрын
very cool!
@ProtoXD Жыл бұрын
Can you post a video putting the cab onto the chasis? Would be cool to see I know this is a dream project for a lot of people :)
@joannekrysta3886 Жыл бұрын
Love it thks again guys😂
@stephenfrost545 Жыл бұрын
Man! Its cool to see such a wicked and clean build that is local. If you're in the Calgary area, would you mind if I check the truck out? I'll bring the refreshments haha
@robertbeasley2070 Жыл бұрын
That was a dick move.
@YippeeKiYayMrFalcon Жыл бұрын
I come from a long line of farmers in Eastern Oregon. Farmers deserve all the respect and admiration that we can give them! Without them, we don't eat!!! Thank-you.
@christopherwilson2911 Жыл бұрын
Beautiful, I have a similar project planned. Would love to chat with you about a few of the issues that you encountered along the way.
@VelocityVideo Жыл бұрын
Yah, we could chat. PM me on Facebook or Instagram and I'll get you my contact info Chris.
@domib3873 Жыл бұрын
whats the difference between the GM t5 and the ford t5??
@VelocityVideo Жыл бұрын
I'm not sure. Hopefully someone can chime in on that.
@possiblycrazy442 Жыл бұрын
Depending on the year, the main case could be different. The mainshaft and tail housing are pretty much always different. The GM mainshafts usually have a 27 spline count, so Ford OD driven gears will not fit on them. Input shafts are also different, as are shifter bases.
@domib3873 Жыл бұрын
thinking about putting a t5 behind a mild 400sbc into my 1987 trans am... how much power would you say the t5 G-force upgrade would handle HP & TQ wise??
@VelocityVideo Жыл бұрын
From my own limited experience racing this trans, it didn't hold up to our 393 stroker. I'm estimating it makes 550hp and somewhere between 475-525tq. We blew out third gear after about 4 track days.
@possiblycrazy442 Жыл бұрын
@@VelocityVideo Thank you for this. I was going to use a T5Z gear set in a G-Force case in a 300hp, 3,400lb car for autocross, travel, and track days. Might just go with the TKX now.
@mrh8409 Жыл бұрын
Wow really? That doesn’t sound to promising with the claimed 500tq. Did you go with another gforce gear replacement?
@jtjt3823 Жыл бұрын
Thank you for the update. Guess I’ll be saving my money for a tkx
@ericmyers4982 Жыл бұрын
@@possiblycrazy442 They didn't use the main shaft from gforce, only used the gears. The gears are rated for 400ftlbs but with the shaft is 600. See where all the gears are pressed off & pressed back on to the stock main shaft?. Gforce main shaft is 9310 harden steel. The stock t5 shaft is flimsy twisting under the load casing the gears to break off. This is the argument on Jegs, Summit, & many Mustang communities. I have a 306 ford 496hp with the Gforce gears. Main shaft & gears. Most enthusiasts don't know about the shaft, I overlooked it as well then went back to buy it. This was their 1st build they couldn't have known. But the gears are good for 400ftlb without the shaft. Normal t5 about 325 ( worldclass)
@factotum_cinema Жыл бұрын
Ford needs to produce something like this
@timhauptman146 Жыл бұрын
what did you do for tailgate latches?
@davidwilder7109 Жыл бұрын
Not my style, but a beautiful build. Old look, and modern amenities.
@VelocityVideo Жыл бұрын
Thanks David! Yeah, modern amenities sure are nice on the long road trips.
@phillippressotto Жыл бұрын
What undercoating did you use for the frame and body to protect from the elements?
@1RAYGC Жыл бұрын
My 1st car in 1967 was a 1960 Thunderbird.
@mikethatguy27 Жыл бұрын
Wow what an amazing build.💯🙌
@joequillun7790 Жыл бұрын
Good job on the video, and thanks. But notice,... experienced professional, ..no gloves. New generation...can't take the feel of oil and grime.
@ElchrstinGaming Жыл бұрын
I'm 19 and i agree lol, i was taught by the old generation mechanics, gloves take away the feel and its harder to work with! Sometimes it's hard to even tell what you're grabbing on to.
@johnbaker3817 Жыл бұрын
That looks fun and exciting but too scary for me there's no way you could get me in one of those water rockets no way
@derekpiehl85 Жыл бұрын
I'm jealous that is awesome. Gotta love the older trucks the new ones just don't have the look of the 70s through the mid 90s
@Robert-mn8gc Жыл бұрын
And a guy in Atlanta had his drag jet boat @ 135mph 1.5 to 2 yrs ago
@Robert-mn8gc Жыл бұрын
Fastest ever Jet Boat was put 2gether in California approx 30/35 yrs ago by Place Diverters & Controlls . 170mph down the Quarter mile . Don't think this jet boat is any where near this 120 mph tops
@Matt211881 Жыл бұрын
Great work. I think I’ll be doing the same.
@jcnpresser Жыл бұрын
That’s a cool video! Those new gears aren’t too loud. Was wondering.
@VelocityVideo Жыл бұрын
Yah, not too crazy. Definitely louder than stock and would get annoying on a long highway drive I would guess. But our car is very loud to begin with since it has no interior so what's just a little more noise lol.
Пікірлер
I love that Paul is playing in the background 😂 that’s how I did it when I built mine
Definitely doing this to my king ranch ecoboost
Amazing!!!
Putting an ecoboost in that truck is a god damn tragedy. You couldnt find a 5.0 or even a 300 inline six? That truck deserves better...
Love these kind of videos. Just retire want watch all day.
LETS GOOO! SO AWESOME TO SEE A VELOCITY POST
Ya look like Bill Burr the comedian! So, did you feel any improvement? Just picked up a T-5 from a '95 S-10. and want to do a K-24 swap..
Was it worth doing or would you just go with a tkx ?
How’s it holding up???
Good question. It lasted about 4 track days before 3rd gear went out on it. (Our stroker was putting out 550-600hp) rather than our original guess of 500. Since then, I downgraded to a mild 306cid with a TKX. Working great.
Nice truck
How much is the upgrade?
Should use billet sincro keys and carbon syncro upgrade.
Is this the 2.95 first gear?
Old truck in its natural habitat!
Such an amazing clean truck
Great job 🎉
Did you upgrade the rear to àn IRS ??
No it's a 9" 3.55
More Great coverage of the event, Thank you ! Why is the USA coverage so lacking and the Mexico non-existent ? ?
As usual, GREAT coverage ! ! ! Thank you ! ! ! Love watching the World Jet Boats !
Great race and coverage .
GREW UP G.P.
I really am thinking about doing this with my 2012 king ranch ecoboost I think it would be a really cool daily at that point
wait, so let me get this straight... I can keep the transmission case and some of the retainers and all I have to do is get a kit like that from G-Force and I can push 500hp out of it? No way... I don't believe it. :0 Is that true man?
let me lead with looks good on the outside BUT well its not really a 1979 anymore is it this is no longer resto mod and is a reskin let's be honest
Man, that’s my dream truck really good job
Great video and company. Your drone operator and editor earned their money with this one!
Asshole knew what his jet wash would do to this other boat. Knew damn well if he cut in front of the other boat it would blow it over. Should be banned for life. Could have killed someone!
Once again review the black or blue racing boat because I happen to be looking for a color design for my boat. 🙏🤣
very cool!
Can you post a video putting the cab onto the chasis? Would be cool to see I know this is a dream project for a lot of people :)
Love it thks again guys😂
Man! Its cool to see such a wicked and clean build that is local. If you're in the Calgary area, would you mind if I check the truck out? I'll bring the refreshments haha
That was a dick move.
I come from a long line of farmers in Eastern Oregon. Farmers deserve all the respect and admiration that we can give them! Without them, we don't eat!!! Thank-you.
Beautiful, I have a similar project planned. Would love to chat with you about a few of the issues that you encountered along the way.
Yah, we could chat. PM me on Facebook or Instagram and I'll get you my contact info Chris.
whats the difference between the GM t5 and the ford t5??
I'm not sure. Hopefully someone can chime in on that.
Depending on the year, the main case could be different. The mainshaft and tail housing are pretty much always different. The GM mainshafts usually have a 27 spline count, so Ford OD driven gears will not fit on them. Input shafts are also different, as are shifter bases.
thinking about putting a t5 behind a mild 400sbc into my 1987 trans am... how much power would you say the t5 G-force upgrade would handle HP & TQ wise??
From my own limited experience racing this trans, it didn't hold up to our 393 stroker. I'm estimating it makes 550hp and somewhere between 475-525tq. We blew out third gear after about 4 track days.
@@VelocityVideo Thank you for this. I was going to use a T5Z gear set in a G-Force case in a 300hp, 3,400lb car for autocross, travel, and track days. Might just go with the TKX now.
Wow really? That doesn’t sound to promising with the claimed 500tq. Did you go with another gforce gear replacement?
Thank you for the update. Guess I’ll be saving my money for a tkx
@@possiblycrazy442 They didn't use the main shaft from gforce, only used the gears. The gears are rated for 400ftlbs but with the shaft is 600. See where all the gears are pressed off & pressed back on to the stock main shaft?. Gforce main shaft is 9310 harden steel. The stock t5 shaft is flimsy twisting under the load casing the gears to break off. This is the argument on Jegs, Summit, & many Mustang communities. I have a 306 ford 496hp with the Gforce gears. Main shaft & gears. Most enthusiasts don't know about the shaft, I overlooked it as well then went back to buy it. This was their 1st build they couldn't have known. But the gears are good for 400ftlb without the shaft. Normal t5 about 325 ( worldclass)
Ford needs to produce something like this
what did you do for tailgate latches?
Not my style, but a beautiful build. Old look, and modern amenities.
Thanks David! Yeah, modern amenities sure are nice on the long road trips.
What undercoating did you use for the frame and body to protect from the elements?
My 1st car in 1967 was a 1960 Thunderbird.
Wow what an amazing build.💯🙌
Good job on the video, and thanks. But notice,... experienced professional, ..no gloves. New generation...can't take the feel of oil and grime.
I'm 19 and i agree lol, i was taught by the old generation mechanics, gloves take away the feel and its harder to work with! Sometimes it's hard to even tell what you're grabbing on to.
That looks fun and exciting but too scary for me there's no way you could get me in one of those water rockets no way
I'm jealous that is awesome. Gotta love the older trucks the new ones just don't have the look of the 70s through the mid 90s
And a guy in Atlanta had his drag jet boat @ 135mph 1.5 to 2 yrs ago
Fastest ever Jet Boat was put 2gether in California approx 30/35 yrs ago by Place Diverters & Controlls . 170mph down the Quarter mile . Don't think this jet boat is any where near this 120 mph tops
Great work. I think I’ll be doing the same.
That’s a cool video! Those new gears aren’t too loud. Was wondering.
Yah, not too crazy. Definitely louder than stock and would get annoying on a long highway drive I would guess. But our car is very loud to begin with since it has no interior so what's just a little more noise lol.