Just change the filter one time a year or two if u use regularly 😊😊
@mikelopez58653 күн бұрын
You’re not my boy
@samanthalamere74126 күн бұрын
Thank you. My truck broke down for a hot minute and somehow some mice made a nest above my blower motor. No matter what I did I couldn't get rid of the mice smell. I saw videos of people just spraying the vents from the hood, but that never worked. Again, thank you!
@NuMBERNYC6 күн бұрын
@@samanthalamere7412 sorry to hear about the mice. I’m glad it worked out for you.
@jamespowell49506 күн бұрын
Mine doesn't wanna play nice.
@jamespowell49506 күн бұрын
Must be nice to have a joint that screws out instead of bolted on 🤣
@NuMBERNYC6 күн бұрын
😁
@ShadowBlade796 күн бұрын
How did you guys take out the bottom three bolts at the bottom of the plenum with that bar in the way? I can get the one, but that round bar is blocking the other two. EDIT 7/19: I figured it out, and I saw you showed it at 6:40. Now I'm trying to figure out how to get more slack to move that bracket out of the way.
@flacko0018 күн бұрын
How has it been holding up? I'm debating getting a spoiler for my ilx
@NuMBERNYC8 күн бұрын
@@flacko001 holds up strong. 💪🏼 no problem here
@ShadowBlade7913 күн бұрын
Are you supposed to pull those pins all the way out to get the connector off? I got them out halfway, but the connectors still dont want to come off the coil, lol. EDIT: I answered my own question. A little wiggling and jimmying with a screwdriver got them loose. Great video!
@ShadowBlade7913 күн бұрын
How hard was it to get those front ignition coils out without disconnecting them? I'm trying myself and I'm terrified I'll break the wiring.😬 EDIT: Got them out! They were a little tough since it had been a LONG time since that kinda work had been done on them.
@josephtriunfante138415 күн бұрын
great job on your side skirt. you turned a supposedly "goofy looking sideskirt" to a marketable side skirt. ihave to mention that the vinyl wrap did the trick. it really did! i really am amazed!!! wow! i can probably make a decision now if i must buy a side skirt for my car. The vinyl made it look like your extension was oversized or the right size for your car.
@leroycroft478816 күн бұрын
Where do i put jack to support motor?
@v2bincvideos19 күн бұрын
Yeah this don’t work the air blows out that vent area in doesn’t suck air in .. read comments people before wasting time
@JoseCruz-c8i19 күн бұрын
Good evening, I would like to know where you can get the suspensions for that vehicle. I have one just like it and I haven't found anything.
@NuMBERNYC19 күн бұрын
Unfortunately it’s quite difficult to find any aftermarket parts for the Sonata NF. I bought them over in Korea and got them imported to the states. Go on eBay and search for “Sonata NF Coilovers”
@JoseCruz-c8i19 күн бұрын
Good evening, I would like to know where you can get the suspensions for that vehicle. I have one just like it and I haven't found anything.
@15DurangoRT21 күн бұрын
Dude. You need to invest in a tripod.
@NuMBERNYC20 күн бұрын
Thanks! Most def.
@rer196721 күн бұрын
One of the best ways to prevent the mold issue is to not use the recirculation function of the ac in the car. If you do use it just change to fresh air 5 to 10 minutes before you reach your destination. And change your filters at least every 3rd oil change.
@almightye117021 күн бұрын
What year is your sonata ?
@NuMBERNYC21 күн бұрын
It’s a 2010
@andynorth42622 күн бұрын
I got a few narrow cable ties, tied them together and tied them, placing them in and out of the pegs instead of just around them which can be too tight and it worked well
@stephenmurgan23 күн бұрын
2:03 ALVIIIIIN!
@Goldey17126 күн бұрын
You’re absolutely amazing! Thank you so much for sharing this great piece of information. It worked like a charm ❤
@Steve-O_FPV27 күн бұрын
There may be the possibility of damaging the fan motor doing that. I am not certain but it can't be good for it.
@NuMBERNYC27 күн бұрын
I’ve done this to multiple cars, and the motors still work without any problems 👍
@eulogiofuentes194028 күн бұрын
And also at the same time, you don’t wanna overdo with the spray cause you do have electrical wires hooked up to the motor ?
@eulogiofuentes194028 күн бұрын
It’s a great idea To clean your entire vent system, but once you do it replace that cabin filter I personally do it every two years , So my friends, stay cool and fresh
@vernturnquist672929 күн бұрын
I wish you had shown using the flimsy tool don’t care if you bent the ring a new ring cheap. But that dam ring fused to the tank no chisel or screwdriver helps one bit
@Alwayz_Angry29 күн бұрын
i think someone did liquid ass or a stink bomb down my AC vent, out of NO WHERE it smells like rotten eggs, no cat codes just did plugs and injectors all i can think is someone doused my windshield in funk im gonna get my revenge
@xFactoryUSAАй бұрын
Full steel, no hinge points. Love ULTRA 🎉
@peperockolaАй бұрын
Very nice. Thank you.
@vande8910Ай бұрын
Does Lysol not get sticky or tacky after it dries?
@NuMBERNYCАй бұрын
No, it evaporates dry
@Qua2NiceАй бұрын
Did you have to remove anything or you just put it on top of what was already there?
@NuMBERNYCАй бұрын
I didn’t have to remove anything. Very simple to do
@elliottkimbleАй бұрын
From the amount of reviews. You guys telling me that KZread recommends wrongs ways of doing things.
@josephkoch3996Ай бұрын
In this video you mention that you got the shifter nob for the 4 wheel drive control and you were going to install that at a later time but i haven't seen a video of the in stall but the next video i see it already installed. Do you have a video of that install and was there any mods that had to be done in order for it to work since the jeep originally an all wheel drive vehicle?? would love to do that with mine
@NuMBERNYCАй бұрын
Hi Josh, sorry about that. I didn’t make a continuation video on that. It does not seem we can make that happen. 😕
@josephkoch3996Ай бұрын
@@NuMBERNYC was there anything you had to do to convert it to the nob or was it plug and play. cause if its a simple install i would love to be able to change it so its not always all wheel drive. Joe
@fierceflavaАй бұрын
Wish you were in Southern California.. I need your help on my Elantra
@rikishawilliams3444Ай бұрын
Hey where did you get your part from I’m trying to replace mines
@NuMBERNYCАй бұрын
I got on ebay. Search for "Sonata AUX NF" on ebay
@edpowell5754Ай бұрын
From Buffalo, NY. Hey Pal THANKS for posting this video.
@user-lt9wo3se1hАй бұрын
From Lysol website: "Lysol does not recommend using Lysol Disinfectant spray on brass, copper or aluminum or painted wood surfaces." Please do not use corrosive products when cleaning the AC evaporator. I find that the car dealers have their own products that will not damage the AC evaporator. It's about USD20, and roughtly the same from Amazon or local auto parts stores. Thank you.
@NuMBERNYCАй бұрын
Thank you! Lysol does not damage your car parts nor does it damage any home products as long as you let it air dry. That’s why when you blow Lysol in your car, I show you in the video how to air blow through the vents with your car’s AC.
@alicenicholscarter5133Ай бұрын
That is awesome! Thank you very much for that!
@javiercarranza2861Ай бұрын
Congratulations my brother. Well deserved 👏 🙌 🍾💪🏽🙏🏽
@NuMBERNYCАй бұрын
Thank you brother!!!!!
@philowingАй бұрын
have you had any problems since you replaced the fuel pump? Could you get me a link for the pump? Today I found the fuel gauge is completely zero with a full of gas and then when I drove the car again it came back. Ppl said it might be the sending unit but not sure if I would just replace the sending unit or a whole.
@NuMBERNYCАй бұрын
If your unit is older than 10 years, you should definitely change it as a whole. I got the pump on Amazon: a.co/d/7MkXByN
@philowingАй бұрын
@@NuMBERNYC Thanks! however, oddly AMZ says it won't fit to my 2010 sonata
@martyolson9433Ай бұрын
Where did you get the office sign?
@NuMBERNYCАй бұрын
My lady got it for me on my bday. I'll ask her
@NuMBERNYC25 күн бұрын
She said she got it at the FYE store. Sorry for the late response 👍
@PhuocNguyenCanadaАй бұрын
I tested today and great working
@janicewalker2615Ай бұрын
You don’t have to curse use English language Jesus saves
@rodneyroland7338Ай бұрын
Hey do I need to order 2 or does it already come with both sides in a kit?
@NuMBERNYCАй бұрын
They come in pairs.
@rodneyroland7338Ай бұрын
@@NuMBERNYC 🙏🏾
@SGgrayfoxАй бұрын
When you take the panel out, is it possible to remove the gear shift from the boot to install an aftermarket shifter knob or is the shifter and boot one big piece that can't be separated?
@NuMBERNYCАй бұрын
The shifter and the booted can be separated, I just didn’t touch it because I didn’t have to. Maybe in the future I will 🤓
@NaijaNinja07Ай бұрын
🤣🤣🤣 no diddy is crazy
@NuMBERNYCАй бұрын
🤣
@Don.Johnsons2 ай бұрын
Attached A metal plate at the botom of the skirts.
@janetphillips28752 ай бұрын
I inherited a good looking, imaculate 2000 red Chevy Z71 ext cab With bullet hole mags and Mickey Thompson tires, however, tbe seats smell like a gready garage. Scott was a core driller for a mining company, he passed away from cancer, a few minutes after midnight into 2021. He left me his Chevy, even though I already have a 2001, because I was his best friend and took him to all his treatments, and he didnt want his younger brother (52) to junk it and park it in the weeds. I dont drive it much, b7t I cant stand that greasy shop smell. Any tips?
@NuMBERNYCАй бұрын
I would remove and clean out all the airways to make sure it does not have any molds
@veronx2 ай бұрын
thank you for this, I am planing to dechrome all elements on front bumper - those chrome frames around halogen lights and bottom bumper frame too - is there any option to easy remove them ?
@lethalchaos192 ай бұрын
Ill try this method first thanks
@PSIA10002 ай бұрын
Great video. I’ve been wanting to remove that door as well! Question, do you not get the “Device not supported” message when plugging the wireless chargers to the USB ports?
@NuMBERNYC2 ай бұрын
I do get that message, but only if I connect it to port 2.
Пікірлер
Just change the filter one time a year or two if u use regularly 😊😊
You’re not my boy
Thank you. My truck broke down for a hot minute and somehow some mice made a nest above my blower motor. No matter what I did I couldn't get rid of the mice smell. I saw videos of people just spraying the vents from the hood, but that never worked. Again, thank you!
@@samanthalamere7412 sorry to hear about the mice. I’m glad it worked out for you.
Mine doesn't wanna play nice.
Must be nice to have a joint that screws out instead of bolted on 🤣
😁
How did you guys take out the bottom three bolts at the bottom of the plenum with that bar in the way? I can get the one, but that round bar is blocking the other two. EDIT 7/19: I figured it out, and I saw you showed it at 6:40. Now I'm trying to figure out how to get more slack to move that bracket out of the way.
How has it been holding up? I'm debating getting a spoiler for my ilx
@@flacko001 holds up strong. 💪🏼 no problem here
Are you supposed to pull those pins all the way out to get the connector off? I got them out halfway, but the connectors still dont want to come off the coil, lol. EDIT: I answered my own question. A little wiggling and jimmying with a screwdriver got them loose. Great video!
How hard was it to get those front ignition coils out without disconnecting them? I'm trying myself and I'm terrified I'll break the wiring.😬 EDIT: Got them out! They were a little tough since it had been a LONG time since that kinda work had been done on them.
great job on your side skirt. you turned a supposedly "goofy looking sideskirt" to a marketable side skirt. ihave to mention that the vinyl wrap did the trick. it really did! i really am amazed!!! wow! i can probably make a decision now if i must buy a side skirt for my car. The vinyl made it look like your extension was oversized or the right size for your car.
Where do i put jack to support motor?
Yeah this don’t work the air blows out that vent area in doesn’t suck air in .. read comments people before wasting time
Good evening, I would like to know where you can get the suspensions for that vehicle. I have one just like it and I haven't found anything.
Unfortunately it’s quite difficult to find any aftermarket parts for the Sonata NF. I bought them over in Korea and got them imported to the states. Go on eBay and search for “Sonata NF Coilovers”
Good evening, I would like to know where you can get the suspensions for that vehicle. I have one just like it and I haven't found anything.
Dude. You need to invest in a tripod.
Thanks! Most def.
One of the best ways to prevent the mold issue is to not use the recirculation function of the ac in the car. If you do use it just change to fresh air 5 to 10 minutes before you reach your destination. And change your filters at least every 3rd oil change.
What year is your sonata ?
It’s a 2010
I got a few narrow cable ties, tied them together and tied them, placing them in and out of the pegs instead of just around them which can be too tight and it worked well
2:03 ALVIIIIIN!
You’re absolutely amazing! Thank you so much for sharing this great piece of information. It worked like a charm ❤
There may be the possibility of damaging the fan motor doing that. I am not certain but it can't be good for it.
I’ve done this to multiple cars, and the motors still work without any problems 👍
And also at the same time, you don’t wanna overdo with the spray cause you do have electrical wires hooked up to the motor ?
It’s a great idea To clean your entire vent system, but once you do it replace that cabin filter I personally do it every two years , So my friends, stay cool and fresh
I wish you had shown using the flimsy tool don’t care if you bent the ring a new ring cheap. But that dam ring fused to the tank no chisel or screwdriver helps one bit
i think someone did liquid ass or a stink bomb down my AC vent, out of NO WHERE it smells like rotten eggs, no cat codes just did plugs and injectors all i can think is someone doused my windshield in funk im gonna get my revenge
Full steel, no hinge points. Love ULTRA 🎉
Very nice. Thank you.
Does Lysol not get sticky or tacky after it dries?
No, it evaporates dry
Did you have to remove anything or you just put it on top of what was already there?
I didn’t have to remove anything. Very simple to do
From the amount of reviews. You guys telling me that KZread recommends wrongs ways of doing things.
In this video you mention that you got the shifter nob for the 4 wheel drive control and you were going to install that at a later time but i haven't seen a video of the in stall but the next video i see it already installed. Do you have a video of that install and was there any mods that had to be done in order for it to work since the jeep originally an all wheel drive vehicle?? would love to do that with mine
Hi Josh, sorry about that. I didn’t make a continuation video on that. It does not seem we can make that happen. 😕
@@NuMBERNYC was there anything you had to do to convert it to the nob or was it plug and play. cause if its a simple install i would love to be able to change it so its not always all wheel drive. Joe
Wish you were in Southern California.. I need your help on my Elantra
Hey where did you get your part from I’m trying to replace mines
I got on ebay. Search for "Sonata AUX NF" on ebay
From Buffalo, NY. Hey Pal THANKS for posting this video.
From Lysol website: "Lysol does not recommend using Lysol Disinfectant spray on brass, copper or aluminum or painted wood surfaces." Please do not use corrosive products when cleaning the AC evaporator. I find that the car dealers have their own products that will not damage the AC evaporator. It's about USD20, and roughtly the same from Amazon or local auto parts stores. Thank you.
Thank you! Lysol does not damage your car parts nor does it damage any home products as long as you let it air dry. That’s why when you blow Lysol in your car, I show you in the video how to air blow through the vents with your car’s AC.
That is awesome! Thank you very much for that!
Congratulations my brother. Well deserved 👏 🙌 🍾💪🏽🙏🏽
Thank you brother!!!!!
have you had any problems since you replaced the fuel pump? Could you get me a link for the pump? Today I found the fuel gauge is completely zero with a full of gas and then when I drove the car again it came back. Ppl said it might be the sending unit but not sure if I would just replace the sending unit or a whole.
If your unit is older than 10 years, you should definitely change it as a whole. I got the pump on Amazon: a.co/d/7MkXByN
@@NuMBERNYC Thanks! however, oddly AMZ says it won't fit to my 2010 sonata
Where did you get the office sign?
My lady got it for me on my bday. I'll ask her
She said she got it at the FYE store. Sorry for the late response 👍
I tested today and great working
You don’t have to curse use English language Jesus saves
Hey do I need to order 2 or does it already come with both sides in a kit?
They come in pairs.
@@NuMBERNYC 🙏🏾
When you take the panel out, is it possible to remove the gear shift from the boot to install an aftermarket shifter knob or is the shifter and boot one big piece that can't be separated?
The shifter and the booted can be separated, I just didn’t touch it because I didn’t have to. Maybe in the future I will 🤓
🤣🤣🤣 no diddy is crazy
🤣
Attached A metal plate at the botom of the skirts.
I inherited a good looking, imaculate 2000 red Chevy Z71 ext cab With bullet hole mags and Mickey Thompson tires, however, tbe seats smell like a gready garage. Scott was a core driller for a mining company, he passed away from cancer, a few minutes after midnight into 2021. He left me his Chevy, even though I already have a 2001, because I was his best friend and took him to all his treatments, and he didnt want his younger brother (52) to junk it and park it in the weeds. I dont drive it much, b7t I cant stand that greasy shop smell. Any tips?
I would remove and clean out all the airways to make sure it does not have any molds
thank you for this, I am planing to dechrome all elements on front bumper - those chrome frames around halogen lights and bottom bumper frame too - is there any option to easy remove them ?
Ill try this method first thanks
Great video. I’ve been wanting to remove that door as well! Question, do you not get the “Device not supported” message when plugging the wireless chargers to the USB ports?
I do get that message, but only if I connect it to port 2.