I have a gen 1 Glock and I don’t know where to look for cracks it’s old badly been fired it’s my grandpas old gun
@markd20774 ай бұрын
First.😀 Three years late.
@joepadgett1494 ай бұрын
Foster bit, bro.
@floridabowhunter67854 ай бұрын
I know you made this video 4yrs ago , you said you might space your holes wider for strength, but if you use left over pieces of dowel to plug the holes it would add strength back into it and you can still move the dowels around any way you want as long as nothing is glued permanent , you can even have more spacing at the top and bottom by using any hole you want to by screwing several dowels to the wall then you can pull the complete rack off when you want without unscrewing any thing
@user-zs3xl4dm6w5 ай бұрын
I had a sheriffs Glock 22 gen 3 with the police badge on the side fina cop another sheriffs G22 slide and throw it on a p80 frame 🔥
@TheMemyselfandi235 ай бұрын
Gen 5 is the same grip except maybe more aggressive and has a light rail. To say this is waaaaaay better, would be factually false.
@kentdurham27166 ай бұрын
A buddy purchased a heavily used gen one G-17 around 1990, with many rounds through it. I don’t ever think it was cleaned. It had, get this about 1/8” of compacted powder residue on the feed ramp and into the throat to the barrel. So much that it wouldn’t chamber a round! Initially, I thought well we will just polish that factory feed ramp and went after it with a felt bob and some flitz. Yeah, we were just polishing the build up. Haha. Had to use I believe, one of those nut picks you used to get with the nut cracker kit. Anyway after about 5 minutes with the pick I could see and feel base metal. Eventually, I was able to chip away all the build up and polish the feed ramp and the lead in to the throat of the pistol. Brushed out the slide with a tooth brush and some woolite from the nearby wash room in the basement. Realized I needed to pull the innards out of the slide…. Took a minute to figure that out. Looked like a half greasy, half dry machined hole when I pulled out the striker and extractor parts. Cleaned that up too with Qtips… many. Put it all back together with some 3 in 1 oil. We excitedly ran off to the gravel pit to shoot it. Didn’t think about the magazines…. Holy smokes they were so, so, dirty too! Several malfunctions later we took the magazines apart and cleaned them out with a sock, lol. Had some reloads that we were saving for war. Loaded mags and shot the rest of the afternoon, probably around 500 rounds and worn out thumbs from loading those mags up. I remember that there was hardly any of the black finish on the slide and the pebble grain grip was very slick and worn in spots. Wish I knew the story behind that gun. Anyway, it was carried for a few months by my Buddy and shot a lot more. Eventually he traded it for a brand new gen 2 Glock 17. I wish I would have bought it off him. Thinking back, it did have the pencil barrel and that funny cutout in the front of the grip. Funny how it goes…. We had a treasure and didn’t even know it! I remember articles thoughts the years about Glocks going 10’s of thousands of rounds and still accurate. Yeah, keep it my friend. It’s part of history.
@fxsttrigga79108 ай бұрын
I just bought one for less then 500$
@bobwalton48798 ай бұрын
I still have a Glock 17 that I bought from a friend 30 years ago?, Or more. Just watched another video that someone explained the differences of a Glock 1 gen, and a Glock 2 gen? My Glock does not have the pebbling completely around the grip like a Gen 1. But the Gen 1 according to his video has a pebble texture on the front of the trigger guard. My Glock has the Gen 2 texturing on the Grip? But has the pebbling on the trigger guard like a Gen 1? It also has the non-captured spring like a Gen 1? Is my Glock kind of a end of Gen 1, beginning of Gen 2 hybrid? Don't know! Plus I don't know from watching videos that show a 3 letter ID serial # maybe in Europe? Mine has a two letter ID serial #. So I don't know when it was made? MY hunting buddy bought this brand new. I paid him $700 so he could buy a new deer rifle. Have never had a mis-fire, or any problem EVER. Love it, but a lot of folks don't care for them, I don't think I could ever sell it. Mine is not as fancy as yours with the pre-owned police thing. At the time I purchased this, it was pre-banned! Has two original 14 round clips, at the time the laws only let them have 10 round mag's.
@user-zp5jk7gx5b9 ай бұрын
I feel like this is not the actual 1st gen . I remember them way different but maybe i just dont remember all that good.
@FuzedBox9 ай бұрын
Awesome, it's both a pencil barrel and a police trade in! Talk about early adoption! Now all you need is one of those funky chopped up Gen1 Glock 19s! Good luck there... very few have been made, and even fewer ever been up for resale, and only one on Gunbroker in its history, and it went for about $8,000. Just ribbing you. I'm jealous, but perfectly content with my D.C. Gen2 19 police trade-in and my Gen1 17 and P80 reproductions... especially that I gifted my father the P80 one serial# after mine!
@teddy2guns4049 ай бұрын
I have a Glock 21 from 1995 I have named it retro
@simulatedengineering327910 ай бұрын
I have a gen 1, glock 23, police trade in. Built in 1991.. I'd like to sell it
@wharris759410 ай бұрын
Dang the original magazines held 18 rounds not 17
@justusbryant736610 ай бұрын
Why does everybody like the gen 1? Just because its rare or a good gun?
@shanedriver909411 ай бұрын
I've seen new production gen 1 glock 17 in store. The serial number has gen1 in it.
@michaelpearson374811 ай бұрын
How far apart do you mount the 2 boards? I have some bolt action long guns and a couple "sbr's"
@matts.104211 ай бұрын
Great video. Pencil barrel PD trade is sure a keeper.
@matts.104211 ай бұрын
Those are not original magazine. Restricted LE is post AWB. Also Gen 1 mags have u shaped notch.
@charlesleggett2546 Жыл бұрын
Would you be willing to sell one of those LEO mags?
@charlesleggett2546 Жыл бұрын
I also have an MPDC Issue Glock 17 Gen 1. Mine is 36 numbers off from yours. EE612. My 1st Glock ever.
@Kulaan Жыл бұрын
Loved my old g21 g1 besides it cutting the webbing of my hand after 3 shots. I paid 300 in 2007 for mine old OHP gun. When you shoot it it recoils down not up. Love it.
@Kulaan Жыл бұрын
But Solomon. My judge, Joe don’t have to worry about stove pipe. Just got a sand down that 410 round a little bit when you put those in it.
@user-me5hn4pc7p Жыл бұрын
How much was this rifle sold for 4 years ago?
@NgJackal1990 Жыл бұрын
Highly collectible? No it’s not 😂
@pld85 Жыл бұрын
Hey are these still up for sale
@critelli85 Жыл бұрын
I want to start up production again hopefully soon.
@gregoryc9087 Жыл бұрын
JBI Texas.
@wis1024 Жыл бұрын
The king of poly pistols.
@Lee-fi4vo Жыл бұрын
In case you didnt specify: MPDC = "Metropolitan Police, DC". MPD = the main police force in DC. Distinct from WMATA ("Metro Transit" police). There are at least 18 other LE agencies in DC!
@ioryvaldez3792 Жыл бұрын
GOOD GUN MAN FAVORITE GUN THE GLOCK😎🫡🫡
@loganmoy5093 Жыл бұрын
How do you deploy the legs?
@ShadowboltChoco Жыл бұрын
Very cool piece.
@terrell48 Жыл бұрын
That is not a miniature Mauser action and your comparison to an Anshutz is not valid , yes it shoots as well as my two Anshutz sporters
@rachelesters2656 Жыл бұрын
I own a gen 1 model 22 and have carried it since 1994 as a police officer. Love it
@jafo4u5086 ай бұрын
Same here, carrying the old girl right now. She does everything for me.
@yonu5983 Жыл бұрын
Dude, you are going to get the mic closer or speak louder. Speakers are wide open and can barely hear you.
@ObamaoZedong Жыл бұрын
That headliner's more flappy than my ole lady's kiester.
@ObamaoZedong Жыл бұрын
That headliner's more flappy than my ole lady's kiester.
@malinkifox2011 Жыл бұрын
Wonder if the recoil spring has been replaced before you bought it, i have a few Glocks and it’s fairly common for some to have failures to feed or extract when the spring is new, why I always go through a few boxed for heavier grain 9mm before bringing it down to 115gr to break the spring in, wonder if they did a small restoration before selling it.
@wubbagubba8523 Жыл бұрын
Nice job, but get some spray glue at the depot for that headliner in the honda
@lukeabrahams3245 Жыл бұрын
Definitely wear the jacket. “Dress like you own the place!” My only criticism - you missed an obvious opportunity at 36 seconds to do the Conan string dance!
@daisydixie1178 Жыл бұрын
What prefix is yours. Pencil barrels were early A's
@A5vibes Жыл бұрын
Picked one up at a local pawnshop for 375 same mpdc on the slide one mag and the original box
@brittinarollins2659 Жыл бұрын
Forstner bit.
@arcomn Жыл бұрын
Have you thought about making these gun wall racks again? I would certainly like to buy a wall rack from you exactly like the one in this video size and stain color. If you don’t make them can provide the exact dimensions of the gun rack that appears in this video? The pegs appear to be 1.5 inches apart. Nice job!!!!
@1220b Жыл бұрын
Im English and the closest I can get to this honey of a pistol is the pause button. Hold your freedoms close cousins across the pond.
@fabianakrajina3225 Жыл бұрын
What blood type are you ?
@MsBekah10002 жыл бұрын
You look incredible!!I eat ribeye everyday
@kevinkev99962 жыл бұрын
This guy watches a podcast and thinks he knows more than doctors lmao
@buk6708 Жыл бұрын
What ur body look like? Cause bruh built like a 3 story old school building from 1800s?
Пікірлер
super cool
So i got lucky i got my genone for 375
I have a gen 1 Glock and I don’t know where to look for cracks it’s old badly been fired it’s my grandpas old gun
First.😀 Three years late.
Foster bit, bro.
I know you made this video 4yrs ago , you said you might space your holes wider for strength, but if you use left over pieces of dowel to plug the holes it would add strength back into it and you can still move the dowels around any way you want as long as nothing is glued permanent , you can even have more spacing at the top and bottom by using any hole you want to by screwing several dowels to the wall then you can pull the complete rack off when you want without unscrewing any thing
I had a sheriffs Glock 22 gen 3 with the police badge on the side fina cop another sheriffs G22 slide and throw it on a p80 frame 🔥
Gen 5 is the same grip except maybe more aggressive and has a light rail. To say this is waaaaaay better, would be factually false.
A buddy purchased a heavily used gen one G-17 around 1990, with many rounds through it. I don’t ever think it was cleaned. It had, get this about 1/8” of compacted powder residue on the feed ramp and into the throat to the barrel. So much that it wouldn’t chamber a round! Initially, I thought well we will just polish that factory feed ramp and went after it with a felt bob and some flitz. Yeah, we were just polishing the build up. Haha. Had to use I believe, one of those nut picks you used to get with the nut cracker kit. Anyway after about 5 minutes with the pick I could see and feel base metal. Eventually, I was able to chip away all the build up and polish the feed ramp and the lead in to the throat of the pistol. Brushed out the slide with a tooth brush and some woolite from the nearby wash room in the basement. Realized I needed to pull the innards out of the slide…. Took a minute to figure that out. Looked like a half greasy, half dry machined hole when I pulled out the striker and extractor parts. Cleaned that up too with Qtips… many. Put it all back together with some 3 in 1 oil. We excitedly ran off to the gravel pit to shoot it. Didn’t think about the magazines…. Holy smokes they were so, so, dirty too! Several malfunctions later we took the magazines apart and cleaned them out with a sock, lol. Had some reloads that we were saving for war. Loaded mags and shot the rest of the afternoon, probably around 500 rounds and worn out thumbs from loading those mags up. I remember that there was hardly any of the black finish on the slide and the pebble grain grip was very slick and worn in spots. Wish I knew the story behind that gun. Anyway, it was carried for a few months by my Buddy and shot a lot more. Eventually he traded it for a brand new gen 2 Glock 17. I wish I would have bought it off him. Thinking back, it did have the pencil barrel and that funny cutout in the front of the grip. Funny how it goes…. We had a treasure and didn’t even know it! I remember articles thoughts the years about Glocks going 10’s of thousands of rounds and still accurate. Yeah, keep it my friend. It’s part of history.
I just bought one for less then 500$
I still have a Glock 17 that I bought from a friend 30 years ago?, Or more. Just watched another video that someone explained the differences of a Glock 1 gen, and a Glock 2 gen? My Glock does not have the pebbling completely around the grip like a Gen 1. But the Gen 1 according to his video has a pebble texture on the front of the trigger guard. My Glock has the Gen 2 texturing on the Grip? But has the pebbling on the trigger guard like a Gen 1? It also has the non-captured spring like a Gen 1? Is my Glock kind of a end of Gen 1, beginning of Gen 2 hybrid? Don't know! Plus I don't know from watching videos that show a 3 letter ID serial # maybe in Europe? Mine has a two letter ID serial #. So I don't know when it was made? MY hunting buddy bought this brand new. I paid him $700 so he could buy a new deer rifle. Have never had a mis-fire, or any problem EVER. Love it, but a lot of folks don't care for them, I don't think I could ever sell it. Mine is not as fancy as yours with the pre-owned police thing. At the time I purchased this, it was pre-banned! Has two original 14 round clips, at the time the laws only let them have 10 round mag's.
I feel like this is not the actual 1st gen . I remember them way different but maybe i just dont remember all that good.
Awesome, it's both a pencil barrel and a police trade in! Talk about early adoption! Now all you need is one of those funky chopped up Gen1 Glock 19s! Good luck there... very few have been made, and even fewer ever been up for resale, and only one on Gunbroker in its history, and it went for about $8,000. Just ribbing you. I'm jealous, but perfectly content with my D.C. Gen2 19 police trade-in and my Gen1 17 and P80 reproductions... especially that I gifted my father the P80 one serial# after mine!
I have a Glock 21 from 1995 I have named it retro
I have a gen 1, glock 23, police trade in. Built in 1991.. I'd like to sell it
Dang the original magazines held 18 rounds not 17
Why does everybody like the gen 1? Just because its rare or a good gun?
I've seen new production gen 1 glock 17 in store. The serial number has gen1 in it.
How far apart do you mount the 2 boards? I have some bolt action long guns and a couple "sbr's"
Great video. Pencil barrel PD trade is sure a keeper.
Those are not original magazine. Restricted LE is post AWB. Also Gen 1 mags have u shaped notch.
Would you be willing to sell one of those LEO mags?
I also have an MPDC Issue Glock 17 Gen 1. Mine is 36 numbers off from yours. EE612. My 1st Glock ever.
Loved my old g21 g1 besides it cutting the webbing of my hand after 3 shots. I paid 300 in 2007 for mine old OHP gun. When you shoot it it recoils down not up. Love it.
But Solomon. My judge, Joe don’t have to worry about stove pipe. Just got a sand down that 410 round a little bit when you put those in it.
How much was this rifle sold for 4 years ago?
Highly collectible? No it’s not 😂
Hey are these still up for sale
I want to start up production again hopefully soon.
JBI Texas.
The king of poly pistols.
In case you didnt specify: MPDC = "Metropolitan Police, DC". MPD = the main police force in DC. Distinct from WMATA ("Metro Transit" police). There are at least 18 other LE agencies in DC!
GOOD GUN MAN FAVORITE GUN THE GLOCK😎🫡🫡
How do you deploy the legs?
Very cool piece.
That is not a miniature Mauser action and your comparison to an Anshutz is not valid , yes it shoots as well as my two Anshutz sporters
I own a gen 1 model 22 and have carried it since 1994 as a police officer. Love it
Same here, carrying the old girl right now. She does everything for me.
Dude, you are going to get the mic closer or speak louder. Speakers are wide open and can barely hear you.
That headliner's more flappy than my ole lady's kiester.
That headliner's more flappy than my ole lady's kiester.
Wonder if the recoil spring has been replaced before you bought it, i have a few Glocks and it’s fairly common for some to have failures to feed or extract when the spring is new, why I always go through a few boxed for heavier grain 9mm before bringing it down to 115gr to break the spring in, wonder if they did a small restoration before selling it.
Nice job, but get some spray glue at the depot for that headliner in the honda
Definitely wear the jacket. “Dress like you own the place!” My only criticism - you missed an obvious opportunity at 36 seconds to do the Conan string dance!
What prefix is yours. Pencil barrels were early A's
Picked one up at a local pawnshop for 375 same mpdc on the slide one mag and the original box
Forstner bit.
Have you thought about making these gun wall racks again? I would certainly like to buy a wall rack from you exactly like the one in this video size and stain color. If you don’t make them can provide the exact dimensions of the gun rack that appears in this video? The pegs appear to be 1.5 inches apart. Nice job!!!!
Im English and the closest I can get to this honey of a pistol is the pause button. Hold your freedoms close cousins across the pond.
What blood type are you ?
You look incredible!!I eat ribeye everyday
This guy watches a podcast and thinks he knows more than doctors lmao
What ur body look like? Cause bruh built like a 3 story old school building from 1800s?
Wow! I am gunna do one.