Пікірлер

• 
  @SonjaBella9 күн бұрын

  Hi, thanks for the video...just starting out with printing my own photographs. There was going to be a link in the comments for a resource '27:31 Is there a resource explaining different Moab papers and recommended uses?' - I have watched the KZread video, but there was meant to be a downloadable resource but I can't see it anywhere :)

• 
  @MoabPaper9 күн бұрын

  Hi! We have the presentation to download linked here: www.moabpaper.com/moab-tv

• 
  @SonjaBella9 күн бұрын

  @@MoabPaper Thank-you :)

• 
  @ianarigadas677711 күн бұрын

  Where to buy those paper?

• 
  @MoabPaper9 күн бұрын

  Hello, these are available through our resellers which could be found here: www.moabpaper.com/reseller-map

• 
  @zetaphotography654811 күн бұрын

  Has anything changed in 3yrs to have an updated video with today’s printers. I have an Epson SC P600

• 
  @YvanBedardPhoto26 күн бұрын

  Thanks for this well presented video. Regarding Matte Black vs Photo Black papers, since photo black papers reflect more light, shouldn't their black look lighter? My experience is darker black with matte papers because they have less light reflection. On the other hand, matte papers have less punch.

• 
  @MoabPaper25 күн бұрын

  Photo black papers will appear to have a richer/darker black, as the light reflected has less scatter than a matte black paper. This is also why the MK papers can appear to have a little less 'punch'.

• 
  @lyndafbraun28 күн бұрын

  when you rolled over that pyramid thing, I went back and froze the image and it said "preserves multi resolution information readable by Indesign and some other programs"

• 
  @Argyll9846Ай бұрын

  If you're thinking of printing your images, you need to watch this video.

• 
  @brucesamia6353Ай бұрын

  you need to fix the sound on this, cant hear anything

• 
  @Argyll9846Ай бұрын

  Great video and helped me solve a number of problems with out of gamut issues.

• 
  @Tom-yc8jvАй бұрын

  That is NOT a rebreather. It's a respirator. Two totally different pieces of equipment

• 
  @mlevenhАй бұрын

  Spraying should be a physical dance, even with a small target / object. Holding your wrist to ensure a consistent angle vis-a-vis the item to be sprayed is fine, but one's entire body should move up and down, left and right, during the spraying. Watch how master car painters move. You should be employing legs and torso to keep the same physical attitude / orientation to the spraying target. Again, it's like a dance among the sprayer, the target, and one's body. Thx for the video.

• 
  @retiredlivingthedream17 күн бұрын

  Does it make you feel important to add your "expert commentary" to an already perfect tutorial video? You glory seekers crack me up. Pathetic.

• 
  @dark_phoenix92842 ай бұрын

  does it prevent color fading??

• 
  @MoabPaperАй бұрын

  On matte paper Desert Varnish does help prevent fading due to UV degradation.

• 
  @ddsdss2564 ай бұрын

  Thanks. My first question is how important is it to use spray, given the fact (well, claim) that supposedly archival-quality, pigment-based inks on archival quality paper should last for 200-400 years? My second question is how important is an additional layer of (cehimcal) protection if the print is framed with glass or plexi? My third question is, how much long-term testing has been done to determine the effectiveness of spray varnish over the years and are there any negatives associated with its use (other than of course the toxicity)?

• 
  @MoabPaper25 күн бұрын

  1- The desert varnish and preservation coatings generally are used to protect against UV, scratches and scuffs, and to some extent humidity changes. Longevity numbers for inks assume dark storage or archival conditions for maximum permanence. 2- If the print is framed with archival materials and UV-filtering conservation or museum glass, there is no need to add a coating to the print. If you're using non-UV filtering glass, or displaying without glazing, then coating the print is an important step. 3- We do not have longevity testing comparisons available for prints with and without the Desert Varnish.

• 
  @dexon5554 ай бұрын

  Love this video format. I’m glad I’m a Windows user for photo editing and printing, lots of issues being reported lately from friends.

• 
  @m.atalpur90025 ай бұрын

  Dear sir , what is best spray for inkjet prints on cotton paper ?

• 
  @davidproeber29215 ай бұрын

  Thanks Les. Im considering using larger flat sheets of Entrada for an upcoming show. I noticed you were using a Canon printer, similar to my 4100. Is there any way to completely eliminate the printer from incorporating blue and red ink in the B&W print mode? Im trying to force the printer to use just black and gray ink to print my B&W work.

• 
  @MoabPaperАй бұрын

  With the Canon software/driver there is no way to limit printing to only the monochrome inks. In the B&W Photo mode the printer uses color inks to extend the tonal range.

• 
  @mje16256 ай бұрын

  Before and after would have been helpful. Also, explain what you mean when you say the spray can "affect" a glossy or semi-glossy print. Does it give the print a matte finish? Does it dull the finish? Other?

• 
  @MoabPaperАй бұрын

  We don't recommend using the Desert Varnish on a glossy, semigloss, or satin paper. It is not designed for those coatings, and will not disappear into the surface as it does on matte papers.

• 
  @rogerwalton81606 ай бұрын

  (at about 22.26 question on screen) When softproofing in Lightroom, once you start to make any adjustments LR asks if you want to make a virtual copy for this anyway.

• 
  @ChristineRN6 ай бұрын

  Hey Jennifer you are so talented and inspiring !

• 
  @mcroman-superfeat6 ай бұрын

  Hi Jim, also wonder IF you do some editing, or is RAW from the Camera ? ... /// McRoman /// SWEDEN

• 
  @mcroman-superfeat6 ай бұрын

  Hi, I look at many photos B & W taken in CUBA, Most say is amazing deep, shadows and art felling.... THX and Good Luck..., The color photos look assume too... ;)

• 
  @MDanceInc6 ай бұрын

  this is a lot of information...!!

• 
  @thomastuorto99297 ай бұрын

  Most enjoyable vid. Thank you!

• 
  @elmafudd97037 ай бұрын

  I'm old-fashioned, but I still prefer Photoshop, as I have a choice. Especially in the rendering intents, where I feel it is vital to try them all to see which works with which image. I also like an actual copy, not a virtual copy that can be lost by the matrix.

• 
  @bywayz7 ай бұрын

  This is the most understandable and useful explanation of soft proofing I've found, after viewing many. I especially appreciate Jim's assurances that letting a color or colors remain a bit out of gamut is "not horrible." Not at all! In my final prints, some colors that are a bit out of gamut has not mattered. Thank you!

• 
  @ShandaAkin8 ай бұрын

  InDesign works perfectly and so easy to use!

• 
  @markielinhart8 ай бұрын

  Great vid, thank you. The vertical method is the key‼️✌️

• 
  @brandybobandy21948 ай бұрын

  I know you said to wait 4 mins between HALF coats, but how long should I wait between full coats? And how long after that until it's fully dry and I can package it up?

• 
  @MoabPaper7 ай бұрын

  We recommend letting the varnish dry overnight if possible, but a few hours at standard temperature and humidity (65-75 degrees F, 35-60% humidity) should be sufficient.

• 
  @rlast1239 ай бұрын

  Really like your explanation and demo Evan! But it is a pity that because of the video quality anything demonstrated in the darker tones can't be seen!

• 
  @MoabPaper7 ай бұрын

  It is difficult to demonstrate subtle changes on screen via a webinar- I recommend selecting an image of your own to follow along with the steps and see the changes on your own monitor.

• 
  @ianb480110 ай бұрын

  Should you spray the back as well - the paper can swell too!

• 
  @MoabPaper7 ай бұрын

  It is generally only necessary to spray the front/printed side of the paper to protect the image.

• 
  @leovarvak11 ай бұрын

  Hello.Can I apply this spray on metallic photo paper.Will the photo lose its metallic luster?Thank you in advance for the answer.Leonid

• 
  @MoabPaper7 ай бұрын

  The Desert Varnish is only for matte papers. A photo black paper such as the metallic photo paper will not absorb the spray properly.

• 
  @jimlasala84411 ай бұрын

  You will love this paper. Please share.

• 
  @snehamalik792 Жыл бұрын

  which one on slickrock one?

• 
  @visual_dreamz9 ай бұрын

  Metalic pearl

• 
  @1973Antoniob Жыл бұрын

  always a pleasure to see and view a webinar with H. Davis, and I also love his book. Thank you

• 
  @eoslove2022 Жыл бұрын

  We have some on order now!

• 
  @elizabethgbrooke Жыл бұрын

  I have been using Entrada Natural and Entrada Bright paper for years and am very excited at the introduction of this new cold press paper. I have just started using it for images that I want to bring out with textures, and I could not be more pleased. Try it! Thanks Les!

• 
  @emilymoore1652 Жыл бұрын

  I was thinking of using desert varnish, but where I live can be quite humid in the summer. Are there issues with this and is there a recommended humidity level? Thanks!

• 
  @MoabPaper Жыл бұрын

  The higher the ambient humidity the longer it will take each coat of varnish to dry. If you spray it outside, and then bring it indoors to dry (assuming your home has a lower humidity) then the average times should apply. We don't have time guidelines for application in humid conditions.

• 
  @WeAreAlienBand Жыл бұрын

  thank you so much, this has been super helpful.

• 
  @Lensman64 Жыл бұрын

  Why aren't the templates available anymore?

• 
  @MoabPaper Жыл бұрын

  These are still available here: www.moabpaper.com/template/

• 
  @Lensman64 Жыл бұрын

  @@MoabPaper Thank you! I actually had them and didn't realize it. They're were with the PDF instructions. FYI the link to the templates in the "Show More" above is "dead" on your site (not the link you replied with). it says: "We couldn't find the page you were looking for. This is either because: There is an error in the URL entered into your web browser. Please check the URL and try again. The page you are looking for has been moved or deleted." I'll be using your stock to promote my fine art work. Did a test and the tonal scale and color fidelity is very nice. I printed on an Epson 2200 and used the enhanced matte profile.

• 
  @kenraiteri451 Жыл бұрын

  I have common digital prints that I want a uniform matte finish on. Some coating are not adhering well to the shiner ink. What would be a good product to apply?

• 
  @MoabPaper Жыл бұрын

  With glossy/satin papers a matte laminate will be your best option. A frame shop can apply it for you, we don't have specific recommendations for an at-home product.

• 
  @thomastuorto9929 Жыл бұрын

  Great presentation. I recieve some email news letters from him & his partner from time to time. Thank you, Moab.

• 
  @lesladbrook4508 Жыл бұрын

  Love the video, very helpful. Do you need to set the media type in the printer when you set it in the print function of the software. I am assuming that when using LR or Canon Pro Print Layout that you only need to set the media type and paper profile, this will override any setting on the printer. Thank you

• 
  @MoabPaper Жыл бұрын

  Software should override any settings made on the printer. With wide format (24" and larger) printers it is best to set the media setting both on the printer & in software.

• 
  @thomastuorto9929 Жыл бұрын

  Thank you Moab. Sorry I missed the live presentation. For anybody wondering about the Monitor Color Gamut Warning in the Soft Proofing View/Mode, I usually turn mine off. Especially if there are to many warnings. If there is a good reason to leave it on, please comment. I leave the Destination (Canon Pro100 printer in my case) Gamut Warning on which seems to make more sense to me because that is where the file/image will end up. I also say forget the Apple/Mac monitor. Although they do alright, you are better off getting a monitor made for photographers like a BenQ. (that can be calibrated internally with a 100% sRGB & 100% Adobe RGB=on my purchase wish list). I might actually go 2k over a 4k monitor. Your print won't be a 4k look most likely. Just my opinion. Question. He mentioned books or online for more printing info closer to the beginning of the vid. Can he recommend any really good books on printing to keep on the shelf for learning & reference. Thank you for any replies.

• 
  @MoabPaper Жыл бұрын

  The two books I keep on the shelf are: Fine Art Printing for Photographers - Uwe Steinmueller/Juergen Gulbins The Digital Print - Jeff Schewe

• 
  @thomastuorto9929 Жыл бұрын

  @@MoabPaper Thank you.

• 
  @kenklontz1945 Жыл бұрын

  Very cool

• 
  @christruhe Жыл бұрын

  The sampling for a large print was a great tip!

• 
  @klaus.bernhard Жыл бұрын

  Vety very interesting, thanks a lot, Klaus

• 
  @tracietynersolis2422 Жыл бұрын

  I'm so interested and intrigued. I've been following this for 3 days now thanks to tik tok . I can't wait for the final ending

• 
  @mbslo10 Жыл бұрын

  Great tutorial. If this is sprayed on Entrada Bright Rag, will it diminish the brightness (from OBAs)?

• 
  @MoabPaper Жыл бұрын

  The spray will not diminish the brightness of the photo.

• 
  @user-ti9zc1xv2b Жыл бұрын

  Moab paper is the greatest paper I've used ever, ive stopped using my darkroom because of it; however, fix your branding, this is such a premium product, but the branding and packaging looks something you buy at walmart

• 
  @YoniMayeri Жыл бұрын

  Can you post a link for the printer profiles for these papers?

• 
  @MoabPaper Жыл бұрын

  Here's a link for the printer profiles: www.moabpaper.com/icc-profiles-downloads

• 
  @paullewis6314 Жыл бұрын

  The link for the templates doesn't work.

• 
  @MoabPaper Жыл бұрын

  Here is the link for the templates: www.moabpaper.com/template/