Пікірлер

• 
  @virtualman490Күн бұрын

  Like always is a great job! I want to see a steam train. I hope to see it soon. Regards!

• 
  @AleksandrIvin2 күн бұрын

  Hi. I’m a big fan of your project! I also tried to make small 3d printed locomotive, but it looks very primitive. Your models looks great! I also developed a pcb based on ESP32 chip which has wi-fi and can be connected to a motor. I’d like to share it with you. Are you in Poland, right?

• 
  @PrintedToysКүн бұрын

  Hi! Yes, I'm from Poland. I'm glad you like my projects. I put a lot of work into it. As for the chip - for now I'm building all the toys with free play for 6-10 year olds in mind. I didn't want to use electronics or motors, I'm just focusing on simple hand play (it's a bit of a return to traditional toys from years ago). For now I see that this philosophy works quite well. But of course I don't rule out using electronic control - for now I'm designing models with free spaces so that in the future I can mount motors, electronics and batteries there.

• 
  @justynab.50332 күн бұрын

  This is a masterpiece of engineering

• 
  @trenJacinto-z2i12 күн бұрын

  Ok

• 
  @trenJacinto-z2i13 күн бұрын

  The steam train looks like a br 80 and how I can get the steam locomotive

• 
  @PrintedToys13 күн бұрын

  The steam locomotive was modeled based on imagination. I am glad that there is a real locomotive to which the model is similar! The steam locomotive is ready, but it is waiting for the preparation of a video with construction manual. This may take some time, because in the meantime I am also finishing the semaphore model.

• 
  @Johan-dc6dsАй бұрын

  Where can I download this model? What is his name?

• 
  @PrintedToysАй бұрын

  Here is the direct link: www.printed-toys.com/en/products/trains/lime-wagon If you haven't printed anything from my site yet, I recommend testing out the free locomotives first. Good luck and have fun!

• 
  @Johan-dc6dsАй бұрын

  @@PrintedToys thanks I am Brother of your country I am from Czech Republic

• 
  @virtualman490Ай бұрын

  Amazinng job that's great!! Where I can get the steam locomotive?. Because in your web onnly saw a diesel locomotive design.

• 
  @PrintedToysАй бұрын

  Thank you! I'm just finishing the tests of the steam engine, then I have to do the assembly documentation and prepare the files. This may take some time, because in the meantime I'm working on other models.

• 
  @choochoooo3172 ай бұрын

  you have offiially reached 500 subscribers. congragulations!

• 
  @PrintedToys2 ай бұрын

  Thanks! I'm glad so many people want to see my work :)

• 
  @choochoooo3172 ай бұрын

  @@PrintedToys yu are very welcome

• 
  @maxwellthehedgehog62732 ай бұрын

  Do these trains have real-life bases, or are they just freelance design?

• 
  @PrintedToys2 ай бұрын

  They are all completely invented, but I tried to make them at least somewhat similar to real vehicles. Trains must be good toys first and foremost, so I designed their shape with that in mind.

• 
  @maxwellthehedgehog62732 ай бұрын

  Have you considered making a steam engine?

• 
  @PrintedToys2 ай бұрын

  Yes :) Even more - the steam engine is ready and after tests. Now I only have to make the construction instructions, and that usually takes a while. The steam locomotive can be seen for a moment in this video: kzread.info/dash/bejne/ipeWpcuAeKSfp7g.html

• 
  @limehuzki2 ай бұрын

  Oh my goodness, how has none discovered you yet? These look amazing! And the detail is flawless for toys!

• 
  @PrintedToys2 ай бұрын

  Thanks! I don't promote myself too much, I prefer to develop slowly, so I can refine my projects thoroughly :)

• 
  @limehuzki2 ай бұрын

  @@PrintedToys good job and I wish you luck

• 
  @justynab.50332 ай бұрын

  Your toys bring children and adults a lot of joy. Thank you for your hard work

• 
  @justynab.50332 ай бұрын

  I love your toys, they are brilliant

• 
  @banex25372 ай бұрын

  Can you adapt wheels to lego standatrts? So amasing cargo wagons you make.

• 
  @jezu19882 ай бұрын

  In my opinion, increase the scale of the entire model by 135% and it will be perfect for the Lego track

• 
  @PrintedToys2 ай бұрын

  Thank you! :) The model was designed for my own toy track system (actually, I didn't plan the tracks at all initially), so I didn't worry about the gauge. As @jezu1988 writes, you need to scale the model. I designed the wheels to work on the floor, in fact they are typical for toys, so they are not very suitable for working with real tracks. However, if you replace them with wheels with edges, you will be able to use the trains on classic tracks, but you will need to modify or remove all the brakes.

• 
  @davidmcmurdo71602 ай бұрын

  can i ask what screws you recommend please

• 
  @PrintedToys2 ай бұрын

  The best screws are M2.2x6.5 (metric, mentioned in the video). I'm still looking for an inch equivalent, probably size #2 from the American system might be good. Alternatively, the holes can be reamed to adjust to other sizes.

• 
  @MTYSKIE2 ай бұрын

  Fajne urozmaicenie (coś innego w jednolitym składzie węglarek)

• 
  @PrintedToys2 ай бұрын

  Tak, to właśnie o urozmaicenie chodziło :)

• 
  @meettheamazingbestaimer2 ай бұрын

  God its beautiful

• 
  @PrintedToys2 ай бұрын

  Thank you very much! I'm glad you like it!

• 
  @meettheamazingbestaimer2 ай бұрын

  Why does this channel have only 460 subscribers

• 
  @PrintedToys2 ай бұрын

  I think it's because we never ask for subscriptions :)

• 
  @meettheamazingbestaimer2 ай бұрын

  @@PrintedToysand thats okay cuz i did not forget to subscribe

• 
  @lukasvop59303 ай бұрын

  Perfect designed, it may seem little bit overcomplicated compared to regular injection molded toy, but here is much more details and fun to build it. Awesome work keep goin.

• 
  @PrintedToys3 ай бұрын

  Thank you! The level of complexity is this for several reasons: - I designed all parts so that they could be printed without brims and rafts, - each part fits into the working area of the smallest printer I have (8 cm * 8 cm * 7.5 cm), - you can choose the colors of parts more freely, even on printers that cannot replace the filament during printing, - it's a toy, so to make repairs much easier, it was divided into small parts. If something breaks, all you need to do is print a small part (I run workshops for children with these trains - a total of over 70 locomotives and wagons, after all-day workshops with over 100 children, all repairs and printing of spare parts take no more than an hour). Moreover, assembling and designing colors is also part of the fun, best if it is done together with the child :)

• 
  @lukasvop59303 ай бұрын

  @@PrintedToys It's totally make sense. I really like this idea of combining 3D printing and creating toys, teaching children technical thinking and create beautiful childhood memories. Great to see things like this in this troubled times.

• 
  @fatoumatasama47453 ай бұрын

  Does it come with the filament and screws?

• 
  @PrintedToys3 ай бұрын

  No, you print with your own filament, you also have to buy the screws yourself. However, the project files are completely free.

• 
  @fatoumatasama47453 ай бұрын

  Ever think about making these pre-made?

• 
  @PrintedToys3 ай бұрын

  @@fatoumatasama4745 Yes, I thought about it once, but it's too complicated for mass production. This is a product for hobbyists who will treat assembly as part of the fun. And besides, and quite honestly: I don't like printing, I enjoy designing more :)

• 
  @fatoumatasama47453 ай бұрын

  For a new train I recommend the Prussian T18, speaking of steam trains where is that one steam from that one video?

• 
  @fatoumatasama47453 ай бұрын

  For a new train I recommend the Prussian T18, speaking of steam trains where's that one steam train from the hopper video?

• 
  @matysiak91833 ай бұрын

  Wow to jest konkret.

• 
  @PrintedToys3 ай бұрын

  Już jest na stronie :) Trochę czasu się składa, ale moim zdaniem warto, bo całkiem fajnie wygląda w kolekcji.

• 
  @matysiak91833 ай бұрын

  Daszek który nie pasuje do żadnej z zaprezentowanych lokomotyw. Czyżby cicha zapowiedz nowego projektu czy koncept art pantografu do krokodyla?

• 
  @PrintedToys3 ай бұрын

  Do publikacji szykuje się pierwszy (ale nie ostatni!) elektryk. Właśnie kończy się renderować instrukcja budowy :)

• 
  @c260843 ай бұрын

  Fajne modele ale uważam że są zbyt skomplikowane jak na to co oferują. Powinny mieć napęd.

• 
  @PrintedToys3 ай бұрын

  Najbardziej skomplikowany model pojawi się już niebawem (ponad 100 części). To sporo, jednak w tym szaleństwie jest metoda: zabawki muszą być ekstremalnie łatwe w drukowaniu (wszystko bez podpór) i szybkie w naprawie (małe części szybciej się drukuje i podmienia), poza tym duże rozdrobnienie części pozwala fajnie bawić się kolorami, co dobrze widać na zdjęciach na stronie. Napęd nie był planowany m.in. z powodu kłopotów z przyczepnością - załadowany pociąg naprawdę trudno ruszyć z miejsca. Co prawda dla naprawdę zdeterminowanych pozostało trochę miejsca w przedziałach silników i da się coś tam wsadzić, ale dzieci świetnie się bawią i bez napędu.

• 
  @matysiak91833 ай бұрын

  Właśnie to jest najfajniejsze zamiast monolitu z drukarki 3D masz coś jak klocki LEGO do poskręcania.

• 
  @c260843 ай бұрын

  No tak tylko jak złożę lokomotywę i 3 wagony osobowe to mam ponad 200 części, czyli więcej jak pierwszy lepszy model z 3dsets. Trochę overkill jak na tak małą zabawke. Postawiłbym tysiaka na to, że gdyby to odchudzić to miałoby zdecydowanie większe wzięcie.

• 
  @PrintedToys3 ай бұрын

  ​@@c26084 Tylko że to zabawki dla 5-9 latków, dlatego muszą być łatwe w naprawie i serwisie. Dla przykładu: po całodniowych warsztatach z dziećmi naprawa ponad 70 wagoników zajmuje mi nie więcej niż godzinę (łącznie z drukowaniem części zamiennych). Ale faktycznie stopień skomplikowania może być problematyczny, dlatego pracuję już nad rozwiązaniem ułatwiającym samo drukowanie, bo skręcanie nie jest już tak uciążliwe a nawet potrafi być przyjemne.

• 
  @jezu19883 ай бұрын

  @@PrintedToys dla mnie to super projekty, jedynie ubolewam ze kolka nie sa typowo kolejowe z obrzeżem i rozstaw torow pod rozstaw koł :) ale wiadomo ze to ma byc zabawka dla dzieci :D jestem na etapie wykombinowana jak wsadzic wlasnie jakis silniczek i zasterowac jakims mikrokontrolerem po BT (wemos prawie idealnie sie miesci w komorze silnika, a powerbank w wagoniku kontenerowym), kola tez zmodyfikowalem by byly bardziej realne i torowisko, ale juz sie nie moge doczekac jaki elektryk w planie :) p.s. tramwaj tez bedzie?

• 
  @matysiak91833 ай бұрын

  Robisz świetne modele poszedł blik i już drukuję. Fajnie się składa te kolejki a skręcanie ich na śrubki to bardzo dobry pomysł.

• 
  @PrintedToys3 ай бұрын

  Dzięki! Cieszę się, że wszystko pasuje (zawsze się o to najbardziej martwię). Co do wkrętów - co prawda jest więcej zabawy przy składaniu, ale mają jedną niezaprzeczalną zaletę: jeśli jakaś część się popsuje to łatwo ją wykręcić i wymienić. Zabawki testuję na warsztatach dla dzieci, każdy model przechodzi przez setki rąk, czasem zdarzą się awarie i dzięki wkrętom mogę je naprawić naprawdę szybko. Powodzenia w skręcaniu i życzę dobrej zabawy!

• 
  @igoryerm94743 ай бұрын

  Glad to see your updates. New models. What you are doing is great.

• 
  @PrintedToys3 ай бұрын

  Thank you! :) I'm constantly working on new models, so I've neglected social media a bit. But I hope I can change that :)

• 
  @jumpingjuniperbarnstrum3 ай бұрын

  are you planning any way to motorize the train system?

• 
  @PrintedToys3 ай бұрын

  Probably not, kids today have plenty of toys with motors. I see that they have much more fun when they can move the trains with their hands (it also develops manual skills). I observe this every time during workshops with children, where I test all my models. But I can still change my mind - I didn't want to design the tracks at first, but now there is a whole system of them :)

• 
  @JCmilwaukee3 ай бұрын

  You should sell these pre made

• 
  @PrintedToys3 ай бұрын

  I thought about it, but I prefer to design because it gives me the most fun :)

• 
  @traincrazymotive3 ай бұрын

  I'm guessing this was inspired by the Derail Valley DM-3, based on the paint and general setup.

• 
  @PrintedToys3 ай бұрын

  I have to take a look at this simulator, because it looks very interesting, and the locomotives are really very similar to each other! This similarity may be due to the fact that when designing my locomotives, I try to make them look as universal as possible. In my case, I modeled it on the existing FAUR L30H narrow-gauge locomotive, but I designed most of the elements from my imagination :)

• 
  @traincrazymotive3 ай бұрын

  @@PrintedToys Well, you did a very good job in doing so. It looks so cute, and I love it because of that

• 
  @PrintedToys3 ай бұрын

  @@traincrazymotive Thank you very much and I'm glad you like the project! :)

• 
  @Charlie-wf4er3 ай бұрын

  I recommend making the funnel longer on the steam locomotive, up to the same height as the cab. It just looks odd being so short!

• 
  @PrintedToys3 ай бұрын

  Thank you for your suggestion. There will be several versions of chimneys to choose from - including low and high. This low one is somewhat similar to some chimneys used in some Polish locomotives. Of course, due to the necessary simplifications, this chimney ends much lower than the roof, but with a higher chimney the difference will not be that big.

• 
  @banex25378 ай бұрын

  your prints can be compatible for lego trains? Like in hogwarts train or hidden side ghost train in example? Or better try to make my own to adapt? Because your awesome creations is looking soo close to lego playfeature))

• 
  @PrintedToys8 ай бұрын

  Thank you for the kind words! The trains are specially scaled to fit Lego figures (because practically every child has them :) ). However, I designed the tracks for my own, independent and slightly more complex system, so it will not fit the Lego tracks. However, if you would like to put both solutions next to each other, visually it should look OK.

• 
  @Civi_ts8 ай бұрын

  Such a cool little loco! Love the atention to details!

• 
  @PrintedToys8 ай бұрын

  Thank you very much :) I'm glad you like my effort. I put a lot of work into showing as many details as possible in such a small toy, so that it could be used to explain to children how a real railway works.

• 
  @justynab.50338 ай бұрын

  Świetna robota!

• 
  @justynab.50338 ай бұрын

  Dla młodych i starszych miłośników kolei to najlepsze zabawki na świecie! Gratuluję pomysłu i mistrzowskiego wykonania!

• 
  @MTYSKIE8 ай бұрын

  Tak jak mówi @Justynab.5033 świetna robota (zrub jakieś ezt polskie)

• 
  @AleksandrIvin9 ай бұрын

  Nice model!

• 
  @florint.46209 ай бұрын

  It looks so cute! Very nice!

• 
  @PrintedToys9 ай бұрын

  Thank you! I'm glad you like it :)

• 
  @caleb1869 ай бұрын

  Is this a brio type train?

• 
  @PrintedToys9 ай бұрын

  No, it's our own system. There are tracks for it on our website www.printed-toys.com (specially designed for faster printing). Infrastructure will also be available soon.

• 
  @v.v.m91579 ай бұрын

  This is great! Looking forward to more models.

• 
  @PrintedToys9 ай бұрын

  Thanks! There will be a big update soon :)

• 
  @philipperiffault249910 ай бұрын

  superbe vidéo, merci.👍

• 
  @lukasvop5930 Жыл бұрын

  Can I ask what software do you use for modeling and animating? It looks very solid and professional. For long time I want to do similar stuff, good to see what is possible. Your videos are really inspiring for me, thank you for sharing. Keep going with this stuff, great job. 👍

• 
  @PrintedToys Жыл бұрын

  Thanks! I'm glad you like it. I use Blender for modeling and animation (I generate individual frames in Blender). However, I make the entire film in ShotCut.

• 
  @lukasvop5930 Жыл бұрын

  @@PrintedToys Thanks for the answer, I assumed you used some 3D CAD type software like Solidworks or Fusion 360. Then it's even more impressive because Blender isn't mainly designed for this type work (working with dimension and accuracy). But as we can see it's more then possible, really nice work. I save your channel and contact for later... Hope your channel will grow, all the best.

• 
  @sammyoerth Жыл бұрын

  1.5x it sounds faster but not distorted so you’re not for the tutorial but the satisfaction of building

• 
  @darrenjefferson64922 жыл бұрын

  ✔️ 𝐩𝐫𝐨𝐦𝐨𝐬𝐦

• 
  @ariamperez68232 жыл бұрын

  Quite nice, a lovely little toy, that in theory doesn't look too hard to motorize, -crudely at least, you can make that quite a nice runner, most likely sacrificing some details but a great model nonetheless.

• 
  @PrintedToys2 жыл бұрын

  Thanks! I am currently designing a slightly larger locomotive, there will be more space there. The problem may be the resistance to movement on a longer train, but it can probably be improved.

• 
  @tomekbugiel44042 жыл бұрын

  1

• 
  @MTYSKIE2 жыл бұрын

  Nice

• 
  @PrintedToys2 жыл бұрын

  Dzięki :)

• 
  @ariamperez68232 жыл бұрын

  Looks pretty cute

• 
  @PrintedToys2 жыл бұрын

  Thank you! It looks even better after printing :) Take a look at the photos: www.printed-toys.com/pl/products/trains/passenger-wagon

• 
  @caljucotcas2 жыл бұрын

  love to watch these videos.. just amazing!

• 
  @martinsoublette952 жыл бұрын

  Cool. Even bulkheads in each section of the hull. Love it.

• 
  @davidstokes84412 жыл бұрын

  Brilliant animation, great printing, and much thought in the model/toy, but so many out of scale screws.

• 
  @PrintedToys2 жыл бұрын

  We are working on it. We are currently looking for inch bolt equivalents. If we cannot find it, we will soon create a version for inch screws. Meanwhile, in our series of trains, we have started to cut down on bolts and only use one type.

• 
  @silversrayleigh90592 жыл бұрын

  Hello. Can we use your video as part of our presentation? We plan to make it as a design to follow for our project. Of course we will use proper credits

• 
  @PrintedToys2 жыл бұрын

  Of course! I'd be happy to help or send additional materials if needed. If you do, send me a link, I'll be happy to see it :)

• 
  @silversrayleigh90592 жыл бұрын

  @@PrintedToys it is a presentation and hopefully it will be accepted then we will start the project in motion. May we ask the dimensions of the ship?

• 
  @PrintedToys2 жыл бұрын

  ​@@silversrayleigh9059 The ship model is 33cm long by 7.5cm wide. It is made of modules with dimensions of 7.5 * 7.5cm, so the length can be freely changed.

• 
  @georgeblair71292 жыл бұрын

  neat idea to use filament for the hinges!

• 
  @PrintedToys2 жыл бұрын

  Thank you! We meant that it would be easy to replace the hinge when you accidentally break the door.