Thank you all for tuning in. It was such a pleasure to host this! A seriously magical group.
@michellebeckmann3658 күн бұрын
So happy I got to see it in person. Great chemistry and so much good information. I truly enjoyed all these women!!
@williamcrowe57219 күн бұрын
Goddess, what an incredible panel!!!
@deebeck8 күн бұрын
Thank you Bill!
@ethanliberty5 ай бұрын
Our group doesn't have a dedicated room. Our table is in the living room/kitchen, so maybe I'll be able to convince my fiance to let me get the hex panels, lol. Very helpful vid!
@sirayca_7 ай бұрын
Hello!! Please, can you tell me name of it and the link where you bought it? 01:35
@alanandrews74039 ай бұрын
Is there a follow up? any stains or marks after a couple years?
@BrooklynQuarter3 ай бұрын
Just had to move the poles to a new spot, and had no marks or stains on the ceiling or floor. I'm not sure how it would react to every surface or paint, but in my case there wasn't a sign the poles had been there.
@laurenlloyd99019 ай бұрын
Y’all are my favorite lol
@williamcrowe57219 ай бұрын
Yesss!! Let's go!!
@deebeck9 ай бұрын
👏🏼👏🏼👏🏼👏🏼
@JohnC-bi1nc10 ай бұрын
how long does that PTFE tube in the hot end have to be?
@timd7709 Жыл бұрын
my mini has been sitting broken for about 2 years... and i think your issue is mine exactly... so going to start with this... thanks for the very well made video.
@michellebeckmann365 Жыл бұрын
Really enjoyed the RPG world banter! I learned a lot and took pleasure in meeting all these creatives!
@BrooklynQuarter Жыл бұрын
Thank you!!!
@williamcrowe5721 Жыл бұрын
This one was so good!!
@williamcrowe5721 Жыл бұрын
What an amazing panel it was!!
@BrooklynQuarter Жыл бұрын
Thank you!
@gametrucklosangeles Жыл бұрын
so good!
@BrooklynQuarter Жыл бұрын
It was such a great time!
@davidgreen526 Жыл бұрын
Great panel! Entertaining and informative!
@BrooklynQuarter Жыл бұрын
So glad you enjoyed it! Thank you David!
@BigGoldBelt Жыл бұрын
👏👏👏👏👏👏
@BrooklynQuarter Жыл бұрын
You’re a gem
@plainlyeclectic Жыл бұрын
Amazing. Thank you so much. I assumed I was just buying crap filament because 1-2 of my rolls continually got jammed. This fixed it and prints are looking solid now
@erbartlett Жыл бұрын
where did you get those black clamps that attach the two autopoles together?
@Heiserton Жыл бұрын
I own a MK3S+, Mini+, X1C and X-CF Pro. The mini, is by far the biggest disappointment. Had/have the same issues as you. It’s a repetitive cycle of problems. It just sits now because it’s so frustrating
@henk1199 Жыл бұрын
A very well documented and informative video. One thing, you are talking about the minda probe, but I think it's actualy the newer SuperPinda probe, right?
@lindendale4296 Жыл бұрын
I tried this and the Z axis was not going all the way down to the bed when it read 0. Doing the first layer calibration did not go well either and maxed the live adjust as well and still no contact of filament on the bed any info on this would be awesome!
@BrooklynQuarter Жыл бұрын
Hiya Linden, I would check that your MINDA probe is the right height relative to the nozzle, as that will determine your Z range
@lindendale4296 Жыл бұрын
@@BrooklynQuarter Thanks for the reply! I ended up not following the directions correctly and took the MINDA the wrong direction. Also had to "Disable Steppers" to be able to run the nozzle down to the bed. Thanks for the help and the video!
@rochelleibarra5177 Жыл бұрын
Rupert will always make my day 100x better. EVERY. TIME. lol
@BrooklynQuarter Жыл бұрын
We'll make sure to let him know! A normal person would be so touched by this comment.
@james.a2 жыл бұрын
If I lose track of the orientation of the short piece of bowden tube that goes into the extruder, how do I figure out which way to put it back in??? It's looks the same at both ends…
@BrooklynQuarter Жыл бұрын
I have found similar tubes as well. Without a gauge it can be hard to be sure
@tobiaszkaczmarek142 жыл бұрын
Thank you
@RJin3D2 жыл бұрын
I switched nozzles back and forth, loosening and dropping the heat break away from the PTFE. Ended up with extrusion problems. This guide helped fix my printer. Thanks for posting it!
@BrooklynQuarter2 жыл бұрын
Glad to help!
@Florian_-jk8bu2 жыл бұрын
But whats up with those very visible layer lines? Those are definitely not "normal".
@BrooklynQuarter2 жыл бұрын
That’s just untuned filament settings in the slicer, that’s an entirely separate process to dial in per filament brand.
@LookAwayEntertainment2 жыл бұрын
Thanks for the tip. Link for industrial felt?
@BrooklynQuarter2 жыл бұрын
Here you go: www.mcmaster.com/8307K11/
@LookAwayEntertainment2 жыл бұрын
Thanks!
@Film_It_Yourself2 жыл бұрын
Omg the spaghetti gag is so good! 😂
@oleurgast7302 жыл бұрын
Actually some other tricks to reduce risk of clogging: 1. Increase fan speed for hotend cooler (esp. if printing in hot ambient temperature like in an enclosure or a hot summerday in August). The original fan runs only at 38% (you can hear the difference, on reset it goes to 100% just a moment). Prusa firmware does not allow adjusting this speed - but llama firmware does. Sadly llama firmware is discontiniued and a step behind actual prusa firmware. But you always can go 100% permanent: Open electronics box, remove hotend fan cable, remove black wire from the connector and put it into a dupond connector housing (or put some electrical tape around). Plug fan cable back into the socet and the black wire to J21 Pin 2 (you might remove the jumper there before). This way the fan gets permanent ground instead pulsewith modulated one - so it is permanent on with 100%. While with original fan it is a bit to strong now (and loud), you might instal a Noctua or Sunon fan instead. These are less powerful than the original fan - but compared to original fan @38% theese fans @100% provide 30-50% more cooling air - and are extreme silent. 2. There is a Prusa MINI PC4-M10 Bowden Fitting Adapter on printables. With m10 push-trough couplers you can use one bowden instead of 3 pices. If you use Capricon with 1.9 inside diameter, you can actually reduce retraction distance - and reduced retraction distance is a great way to reduce heatcreep... 3. Same effect with reduced retraction if you use a direct extruder. There are models for sherpa, orbiter and hextruder (and maybe more), all using lightweight Nema 14. (you have to set lower motor current in start g-code and also make a file to set it and "print" the command before first layer calibration). Of course best is to use the fix you have shown + fan mod + diect extruder (+ Revo micro)
@osutx4275 ай бұрын
Revo micro or v6 close enough?
@williamcrowe57212 жыл бұрын
The cinematic death saves... SO GOOD
@moonbrookjewels70442 жыл бұрын
The drama of it all...it looks amazing, I agree!
@FadedHero6362 жыл бұрын
Alright need to go do this to my Mini+ now
@WWalkerz2 жыл бұрын
Hi any advice how to loosen the 3 screws on the heathead? The allen key almost broke trying to loosen it :/ Thx!
@BrooklynQuarter2 жыл бұрын
Did you remove the long machine screw holding in the wire harness, then wiggle the wire harness out of the way? That bottom nut sits captive against the wire harness when it's in position, and won't budge until the harness is moved.
@WWalkerz2 жыл бұрын
@@BrooklynQuarter omg it worked, it's finally fixed after 3 days of frustration. Thank you!!
@BrooklynQuarter2 жыл бұрын
@@WWalkerz Happy to help!
@unloveableandre2 жыл бұрын
My MIni+ started having the same issue with PETG this week, it would print fine, until certain amount of time. then under extrude the filament and ghost print. Very annoying. Had to open extruder, to free the filament, 3 times already. I put together a nice enclosure, and feeding the filament from below, using a longer PTFE tube, and a hole to the enclosure bottom. So I was blaming the friction, or maybe the longer tube, but then I tested with everything as originally came and same issue, after around 2 hours... I read about the issue with the hotend and PTFE tube gap but a video I saw suggested changing the hotend, what I found to be too soon and too much. Here I finally got the right explanation and fix. And such a nicely done video. Thank you, I will try this weekend. RN I am taking the opportunity to do some upgrades, just changing the LCD front panel to add the power and USB port to the front Subscribed as a way to say thank you!
@BrooklynQuarter2 жыл бұрын
Thank you for the kind words!
@durcidesign2 жыл бұрын
after bearing and rods re-lubing, belts change i came her and...thank you sir :)
@BrooklynQuarter2 жыл бұрын
Happy to help!
@grantfahey44392 жыл бұрын
I had a similar issue with my mini +. Luckily, I was able to unscrew the 10mm on the hot end side of the tube, heat up the head and pull it out the blobbed filament, no need to re-adjust anything.
@BrooklynQuarter2 жыл бұрын
I think there might be some sort of small difference in the hot-end assemblies that separates minor issues like you ran into, and the larger issue I encountered. I had hoped when I had my first clog (20 hours in with printing) that it was a blip like you encountered. Fingers crossed your worries are behind you!
@TheBAshot2 жыл бұрын
loved watching this :D
@hakanekberg31622 жыл бұрын
Thank you for the episodes this year! It's been great fun and I'm looking forward to the next season! :) Merry Christmas and Happy New Year to all of you! :)
@BrooklynQuarter2 жыл бұрын
Thank you Håkan! I hope the holidays are a real treat for you, and here’s to next year! 🥂
@rochelleibarra51772 жыл бұрын
Such a great episode! Loved all of the different interactions! You guys are killin' it!
@BrooklynQuarter2 жыл бұрын
Thank you!! 🥰
@hakanekberg31622 жыл бұрын
Yet another great episode! Love it! :)
@BigGoldBelt2 жыл бұрын
Diving into this now ✨
@BrooklynQuarter2 жыл бұрын
Hope you enjoy!
@kg50642 жыл бұрын
great episode!
@williamcrowe57212 жыл бұрын
Man oh man is this my favorite episode.
@hakanekberg31622 жыл бұрын
Thanks for a great episode! :)
@moonbrookjewels70442 жыл бұрын
Dearest one and only Rupert will always have my heart. Love, Brynn
@lizaanonymousfilm10752 жыл бұрын
🤩 let's GOOOOOO!
@thespiritedstoryteller39402 жыл бұрын
I love this episode ✨ well done!
@kilan752 жыл бұрын
I have just taken a mini +, I think it will arrive in 2 weeks, I have heard other people who have taken the Mini and have had this problem, I do not understand why Prusa does not intervene to remedy the defect. Thanks for having found the solution, when I get it I'll pay attention to how the hotend is mounted.
Пікірлер
👏Fantastic!
Thank you!
Thank you all for tuning in. It was such a pleasure to host this! A seriously magical group.
So happy I got to see it in person. Great chemistry and so much good information. I truly enjoyed all these women!!
Goddess, what an incredible panel!!!
Thank you Bill!
Our group doesn't have a dedicated room. Our table is in the living room/kitchen, so maybe I'll be able to convince my fiance to let me get the hex panels, lol. Very helpful vid!
Hello!! Please, can you tell me name of it and the link where you bought it? 01:35
Is there a follow up? any stains or marks after a couple years?
Just had to move the poles to a new spot, and had no marks or stains on the ceiling or floor. I'm not sure how it would react to every surface or paint, but in my case there wasn't a sign the poles had been there.
Y’all are my favorite lol
Yesss!! Let's go!!
👏🏼👏🏼👏🏼👏🏼
how long does that PTFE tube in the hot end have to be?
my mini has been sitting broken for about 2 years... and i think your issue is mine exactly... so going to start with this... thanks for the very well made video.
Really enjoyed the RPG world banter! I learned a lot and took pleasure in meeting all these creatives!
Thank you!!!
This one was so good!!
What an amazing panel it was!!
Thank you!
so good!
It was such a great time!
Great panel! Entertaining and informative!
So glad you enjoyed it! Thank you David!
👏👏👏👏👏👏
You’re a gem
Amazing. Thank you so much. I assumed I was just buying crap filament because 1-2 of my rolls continually got jammed. This fixed it and prints are looking solid now
where did you get those black clamps that attach the two autopoles together?
I own a MK3S+, Mini+, X1C and X-CF Pro. The mini, is by far the biggest disappointment. Had/have the same issues as you. It’s a repetitive cycle of problems. It just sits now because it’s so frustrating
A very well documented and informative video. One thing, you are talking about the minda probe, but I think it's actualy the newer SuperPinda probe, right?
I tried this and the Z axis was not going all the way down to the bed when it read 0. Doing the first layer calibration did not go well either and maxed the live adjust as well and still no contact of filament on the bed any info on this would be awesome!
Hiya Linden, I would check that your MINDA probe is the right height relative to the nozzle, as that will determine your Z range
@@BrooklynQuarter Thanks for the reply! I ended up not following the directions correctly and took the MINDA the wrong direction. Also had to "Disable Steppers" to be able to run the nozzle down to the bed. Thanks for the help and the video!
Rupert will always make my day 100x better. EVERY. TIME. lol
We'll make sure to let him know! A normal person would be so touched by this comment.
If I lose track of the orientation of the short piece of bowden tube that goes into the extruder, how do I figure out which way to put it back in??? It's looks the same at both ends…
I have found similar tubes as well. Without a gauge it can be hard to be sure
Thank you
I switched nozzles back and forth, loosening and dropping the heat break away from the PTFE. Ended up with extrusion problems. This guide helped fix my printer. Thanks for posting it!
Glad to help!
But whats up with those very visible layer lines? Those are definitely not "normal".
That’s just untuned filament settings in the slicer, that’s an entirely separate process to dial in per filament brand.
Thanks for the tip. Link for industrial felt?
Here you go: www.mcmaster.com/8307K11/
Thanks!
Omg the spaghetti gag is so good! 😂
Actually some other tricks to reduce risk of clogging: 1. Increase fan speed for hotend cooler (esp. if printing in hot ambient temperature like in an enclosure or a hot summerday in August). The original fan runs only at 38% (you can hear the difference, on reset it goes to 100% just a moment). Prusa firmware does not allow adjusting this speed - but llama firmware does. Sadly llama firmware is discontiniued and a step behind actual prusa firmware. But you always can go 100% permanent: Open electronics box, remove hotend fan cable, remove black wire from the connector and put it into a dupond connector housing (or put some electrical tape around). Plug fan cable back into the socet and the black wire to J21 Pin 2 (you might remove the jumper there before). This way the fan gets permanent ground instead pulsewith modulated one - so it is permanent on with 100%. While with original fan it is a bit to strong now (and loud), you might instal a Noctua or Sunon fan instead. These are less powerful than the original fan - but compared to original fan @38% theese fans @100% provide 30-50% more cooling air - and are extreme silent. 2. There is a Prusa MINI PC4-M10 Bowden Fitting Adapter on printables. With m10 push-trough couplers you can use one bowden instead of 3 pices. If you use Capricon with 1.9 inside diameter, you can actually reduce retraction distance - and reduced retraction distance is a great way to reduce heatcreep... 3. Same effect with reduced retraction if you use a direct extruder. There are models for sherpa, orbiter and hextruder (and maybe more), all using lightweight Nema 14. (you have to set lower motor current in start g-code and also make a file to set it and "print" the command before first layer calibration). Of course best is to use the fix you have shown + fan mod + diect extruder (+ Revo micro)
Revo micro or v6 close enough?
The cinematic death saves... SO GOOD
The drama of it all...it looks amazing, I agree!
Alright need to go do this to my Mini+ now
Hi any advice how to loosen the 3 screws on the heathead? The allen key almost broke trying to loosen it :/ Thx!
Did you remove the long machine screw holding in the wire harness, then wiggle the wire harness out of the way? That bottom nut sits captive against the wire harness when it's in position, and won't budge until the harness is moved.
@@BrooklynQuarter omg it worked, it's finally fixed after 3 days of frustration. Thank you!!
@@WWalkerz Happy to help!
My MIni+ started having the same issue with PETG this week, it would print fine, until certain amount of time. then under extrude the filament and ghost print. Very annoying. Had to open extruder, to free the filament, 3 times already. I put together a nice enclosure, and feeding the filament from below, using a longer PTFE tube, and a hole to the enclosure bottom. So I was blaming the friction, or maybe the longer tube, but then I tested with everything as originally came and same issue, after around 2 hours... I read about the issue with the hotend and PTFE tube gap but a video I saw suggested changing the hotend, what I found to be too soon and too much. Here I finally got the right explanation and fix. And such a nicely done video. Thank you, I will try this weekend. RN I am taking the opportunity to do some upgrades, just changing the LCD front panel to add the power and USB port to the front Subscribed as a way to say thank you!
Thank you for the kind words!
after bearing and rods re-lubing, belts change i came her and...thank you sir :)
Happy to help!
I had a similar issue with my mini +. Luckily, I was able to unscrew the 10mm on the hot end side of the tube, heat up the head and pull it out the blobbed filament, no need to re-adjust anything.
I think there might be some sort of small difference in the hot-end assemblies that separates minor issues like you ran into, and the larger issue I encountered. I had hoped when I had my first clog (20 hours in with printing) that it was a blip like you encountered. Fingers crossed your worries are behind you!
loved watching this :D
Thank you for the episodes this year! It's been great fun and I'm looking forward to the next season! :) Merry Christmas and Happy New Year to all of you! :)
Thank you Håkan! I hope the holidays are a real treat for you, and here’s to next year! 🥂
Such a great episode! Loved all of the different interactions! You guys are killin' it!
Thank you!! 🥰
Yet another great episode! Love it! :)
Diving into this now ✨
Hope you enjoy!
great episode!
Man oh man is this my favorite episode.
Thanks for a great episode! :)
Dearest one and only Rupert will always have my heart. Love, Brynn
🤩 let's GOOOOOO!
I love this episode ✨ well done!
I have just taken a mini +, I think it will arrive in 2 weeks, I have heard other people who have taken the Mini and have had this problem, I do not understand why Prusa does not intervene to remedy the defect. Thanks for having found the solution, when I get it I'll pay attention to how the hotend is mounted.