Down converter is locked, and I cannot seem to unlock it. I have tried to to decode PDF for hours and hours. Powered it up, attempted to set the voltage and it says lock please help.
@Inventerguy168 күн бұрын
I made a newer version of this video not too long ago that explains how to lock and unlock it. I actually can’t remember how to do it off the top of my head without having the unit right in front of me. I think it’s my latest video that shows how to do it.
@TheCommonDanger7 күн бұрын
@@Inventerguy16 send me the link to your new video
@TheCommonDanger5 күн бұрын
@@Inventerguy16 can you send me the link to the video on how to unlock my board since it came to me locked from Amazon?
@Inventerguy164 күн бұрын
@@TheCommonDanger I’m not sure how to send the link but if you just go into my channel page and go to my videos, it’s the latest video from nine months ago
@Inventerguy164 күн бұрын
@@TheCommonDanger the video name is Drok buck converter how to use and program
@thomasennenga690815 күн бұрын
As a long time mobility chair i love the pronto series, nothing is made better not even close to the quality of invacare made, my all time favorite is the pronto m91
@Inventerguy1615 күн бұрын
@@thomasennenga6908 i’ve had a number of Invacare chairs that I’ve worked on and for the most part there is solid as a rock. The only thing I wish that they would go to is a different version of controller because the shark series seem to have a thermal throttling problem where they get hot easily under any real hard use. I upgraded one of them with a PG drives controller and it had so much more power. If there’s one of the InstaCare chairs, I really would love to get my hands on. It would be a TDX because those chairs for their weight class are the most capable
@thomasennenga690815 күн бұрын
@@Inventerguy16 hey what do you think about the universe controllers, melaunch is one and another I can't find a name has joystick controller and control module, have you ever used one of these, I'm a retired mechanic and for the last 5-6 years been buying selling a chair or scooter and repairing for neighbors but started modifying scooter's for speed,
@Bobbythefanman3 ай бұрын
It’s called strikes the hour
@paulkeen93855 ай бұрын
😂
@stillededge7 ай бұрын
Thanks brother. I've had this silly thing for 4 years...use it often...never knew it could do this stuff until now...and after I locked myself out accidentally.
@Inventerguy167 ай бұрын
I’m glad I was able to help
@dominodoggy18 ай бұрын
Oh wow. Thank you, I can finally use this thing. I've been around a while and have figured out plenty of old Casio watches and even plugged up plenty of old computers where nothing is labeled and every port was just a port and the idea of color coding things wasn't thought up yet, but I still couldn't figure this thing out. So thanks!
@serenacuevas13278 ай бұрын
nice 😃
@angeljackson-qi9rm8 ай бұрын
I watched your video on KZread I have a 51 and the joystick does not the joystick is plugged in it comes on still won't move but if I unplug the the joystick will not come this was my mother's chair and has been in the garage when we got it for some years ago she just couldn't get the handle of using an electric she like the manual better she passed away two years ago I am in need of a the wheelchair still has his it's a brand new but has been in the garage and very dusty and for about 9 years????? I would like to know if you are still in the business and if you could help me or give me an idea of what might be going on
@Inventerguy168 ай бұрын
From what it sounds like it might have a dead battery because that’s typically what happens when the battery is dead or the chair is a neutral which will not allow you to move it while it’s on. If it only turns on when it’s plugged into the charger, then the battery is dead, but if it turns on when the chargers unplugged but still doesn’t move, it’s either a dead battery or stuck in neutral or there’s an error
@angeljackson-qi9rm8 ай бұрын
@@Inventerguy16 do you work on chairs I live in the Columbus Ohio
@angeljackson-qi9rm8 ай бұрын
How do you take the seat off on the 51 I pushed the button on the side up but the seat wouldn't come off or do I just need two people to help
@angeljackson-qi9rm8 ай бұрын
One more thing I charged it over night the light was red in the morning it was green and when I stick the charger in now the light is green as to indicate a full charge but the chair will not come on unless it's plugged up but still won't move
@Inventerguy168 ай бұрын
Turn answer your first question. Yes, I do work on Power Chair’s but I live in Texas. And as far as taking the seat off, it probably would require two people because it’s hard to do with one person. And to answer your last question from what it sounds like your battery is actually dead, especially if it will not turn on once unplugged.
@ahadjes9 ай бұрын
Hello, thank you very much for sharing the programming, I was reading the manual and it looks very complicated. I wanted to ask you if you could help me program mine. If you can, I need the following. The input will be 12 V and the output will be 24 V, now if the input is less than 12, can it be done so that the 24 V does not come out? (that it cuts off, or something like that) and the other thing is that it is programmed only at these two voltages, I am only going to use it for this. If you can help me I would greatly appreciate it.
@Inventerguy169 ай бұрын
Thanks for commenting and I’m glad it helped. What you’re describing is a step up or boost converter which this is a buck step down converter so you would not be able to get 24 V with a 12 V input you would need 24 V or higher to be able to get 24 V on the output side, I recommend going with a 36 to 48 V power supply in two the unit so that way you have a wider range of voltages that you can program it to
@ahadjes9 ай бұрын
Hello, if what you show in the video is like the one I bought on Amazon, it is also a voltage increaser (boost inverter). My question, if you can help me, is to program it, so that it always has the parameters that I programmed it from the beginning. Thank you very much in advance and sorry for the inconvenience.
@Inventerguy169 ай бұрын
I know what you talking about now but the one that you have has a slightly different user interface than this unit so I don’t know how to program that one
@Prim--9 ай бұрын
You definitely explained this module very well. Much better than the broken English in the user manual. I've had one of these in a box for a few months and today I've decided to try and digest the owners user manual this morning but found your video instead. Thanks for saving me the brain hemorrhage, hopefully I can keep the magic blue smoke contained within the Drok showing me EXACTLY how to program this slightly sketchy but extremely useful tool. CHEERS!
@Inventerguy169 ай бұрын
The user manuals that come with these things are often crappy, and they failed to mention certain things. I’m glad my video helped.
@edwardmiszkiewicz5515 Жыл бұрын
Hi Inventroguy16, thanks for posting this video. It is helpful as the internal memory features are not documented very well. Is there a reference manual that explains the settings in detail? Or possible to create one that you could post? Thanks!
@Inventerguy16 Жыл бұрын
Yes it does come with a manual but it’s not very easy to understand. And use the number of these units and I have figured out how to use them easily. Here is the different parameters you can set F0 means safe program so if you sent the voltage and amperage that you want And you click the send button once F0 comes up push the OK button and it will save the parameters you put in. F1 means load program. I believe the unit can store up to 10 separate programs. If you push the send button while in a program and then you cycle to F1 and press OK it will go to the loading screen with lod and a number on the screen the numbers ring from 0 to 10 and depending on which number you pick it will load that program. You can program different voltages and amperage for each program using the F0 function but you have to be already sent to the number that you want those parameters saved in land then go to F0 to save it. F2 is the circuit on feature, where as soon as you plug the unit into supply power the output will be turned on immediately. This is useful if you use it as a charge controller for solar, because as soon as it receives power, it will automatically turn on and start supplying power to your batteries or, whatever you are using it for. If you’re going to be using the unit using a number of different preset, voltages and amperage is, I would not recommend having this feature turned on because it always loads into saved program number zero as default and you have to go in and load the program with the set voltages that you want. I am unsure of what the other F3 & F4 are used for so I wouldn’t recommend messing with them. I hope this description helps I might make another video that goes into better detail of how to program and use the unit now and I have a lot more experience with it.
@edwardmiszkiewicz5515 Жыл бұрын
@@Inventerguy16 Hi, thank you for the explanation. And yes, another video would be cool!
@stevenmiller2131 Жыл бұрын
@inventoryguy16 Just ran across this video doing a Google search for a Super 12 I picked up today. My space bar isn't working - how do I remove the bezel that covers the keyboard so I can get a peek in there?
@yuhaszvideotime763 Жыл бұрын
Is this a triple chime mantel clock?
@Inventerguy16 Жыл бұрын
Yes, it’s a triple chime clock. It has the Westminster and in Saint Michaels, and one other chime I can’t member the name of. I I still have the clock, and I occasionally listen to it from time to time.
@yuhaszvideotime763 Жыл бұрын
@@Inventerguy16 well the last chime is the Whittington chimes.
@Inventerguy16 Жыл бұрын
@@yuhaszvideotime763 thanks I was wondering what it was I personally like the Westminster chime the best
@soniahan8999 Жыл бұрын
I just got one as my first Columbia jacket, thanks for your sharing!
@Inventerguy16 Жыл бұрын
No problem I’m glad you liked the video. It’s a shame that they stopped making this one.
@Vinhhotboii Жыл бұрын
We miss you how get power wheelchair you get for free or buy it how much cost
@Inventerguy16 Жыл бұрын
I get them on Facebook marketplace broken normally and fix them and either sell them or keep them. I normally don’t spend anything more than $200 on each chair that I buy from Facebook marketplace.
@Vinhhotboii Жыл бұрын
@@Inventerguy16 Oh
@wardcase1876 Жыл бұрын
Please send me link we’re you bought your after market d4+3 nanrobot battery 🙏 thanks brother 😉
@Inventerguy16 Жыл бұрын
I bought it on Amazon but I have long since lost the link probably just look up 52 V 30 amp hour battery and you might find it. It’s kind of an off the shelf part so there’s probably different variants of it.
@iCameTwice Жыл бұрын
Stay strong 💪
@iCameTwice Жыл бұрын
Hello I seen your nitro speeders showcase from years back, I’m wondering if you’re willing to sell it? It was my childhood dream toy when I was younger, I would love to buy it from you
@viifendi Жыл бұрын
are these still buyable?
@Inventerguy16 Жыл бұрын
Maybe on eBay they discontinued them a long long time ago
@viifendi Жыл бұрын
@@Inventerguy16 thx dude
@iCameTwice Жыл бұрын
@@Inventerguy16 50$ usd you interested?
@iCameTwice Жыл бұрын
@@Inventerguy16 this was my dream toy as a kid, never got it on holidays tho because they got discounted
@Inventerguy16 Жыл бұрын
Unfortunately, I don’t have it anymore. I lost it when we moved a few years ago.
@wardcase1876 Жыл бұрын
The upgrade one, how much? Thanks for your videos love them I will share them!
@wardcase1876 Жыл бұрын
We’re did you buy your d4+3 nanrobot battery? Please and thanks 🙏
@Inventerguy16 Жыл бұрын
Battery that I bought was not made for it. It was just a generic 52 V 30 amp hour batteries that I made a external housing for. But I bought it on Amazon for about 500.
@wardcase1876 Жыл бұрын
@@Inventerguy16 can you please share link
@jusded6803 Жыл бұрын
This is great.
@Inventerguy16 Жыл бұрын
I’m glad you like it. The scooter was probably the best of the sleepers and I’ve ever built besides my electric micro bike
@ballancampeau6427 Жыл бұрын
I have a solar panel whose Voc (51.4V) exceeds the limit on the charge controller (45V). Isc is fine (9.8A). The controller can handle more than 15A. Since the input is from a solar panel, the V varies. Can I use this to limit the voltage into the charge controller to 45V? If the V in is less than 45V, will the actual voltage pass through? Finally, if I set the current to 10A, can you foresee any problem?
@Inventerguy16 Жыл бұрын
You can use it to step down the voltage for your solar system, but I wouldn’t recommend pushing 10 A without improving the cooling system for the converter because the fan it comes with is garbage it can do 10 A at 45+V they will immediately overheat if there’s not a good amount of air circulation being blown across the heat sink but if you solve the cooling problem, it shouldn’t have any issues running at 45 V at 10 A
@brandonwilson3423 Жыл бұрын
You can change it to miles. press the up and down arrow keys at the same time. This is the setting menu there are 8 pages/screens. Press the middle key to switch between setting screens. Go to p4 and change it from 0 to 1.
@Inventerguy16 Жыл бұрын
I actually did go through the settings and try all that and none of them did it on that particular unit mind me I’ve just been messed up but I was never able to get it to switch from kilometers to miles. Unfortunately that thing is long since I’ve been gone someone stole it from me at an H-E-B
@katentropy Жыл бұрын
I dropped my Patton U2-187 14" high velocity fan. The cover popped off, the blade hit and got scratched, and one blade bent a little so it vibrates like crazy! Is there any way I can align the blade? I tried bending it, lol. Very strong steel. The motor is perfect, not used a lot. Thank you for any advice! Also, how do I get the cover back on?
@Inventerguy16 Жыл бұрын
The blades are incredibly hard to bend you will probably need to use a vice or some channel locks to be able to get enough of a grip on it to be able to bend it back. As for the cage, it might just snap back on unless it has screws that got stripped out when it fell.
@typewriter6885 Жыл бұрын
good lord, just buy a $6 ribbon, it will last years
@beelindsey1167 Жыл бұрын
Hi, i enjoyed your video, It answered some questions I had, since I got it used as a gift 3 years ago. Do you know where I could source a new joystick controller for this model?
@Inventerguy16 Жыл бұрын
Thanks for commenting! I’m glad you enjoyed the video. In regards to your question there’s a website called www.monsterscooterparts.com they have all of the different styles of controllers enjoy sticks for these Power Chair‘s. It’s a unit you have one that has a skinny wire coming from the joystick or is it a fat one? If it’s a skinny wire it would be a different model controller than the one that’s on my Power Chair. The units with the fat wires have all in one controllers where the controller is in the joystick itself instead of being a separate module on the Power Chair.
@Longshot247402 жыл бұрын
Exact same color and style of mine. Glad i found a video
@GodRustang2 жыл бұрын
Yo, I own one of these and it starts and stops now, where for years it could run for weeks at a time with no issue. Any tips on fixing it up?
@Inventerguy162 жыл бұрын
You might want to take the motor off and clean the motor shaft and bushings and check if there’s any debris inside that could be stalling it out
@genelegear54182 жыл бұрын
Thanks Alex
@genelegear54182 жыл бұрын
Great review on the various chairs 💺, I learn a lot by just watching your videos. Thanks
@Inventerguy162 жыл бұрын
I’m glad you like them the Invacare pronto series of power chairs are really good they’re basic and simple to use but they’re well-built
@genelegear54182 жыл бұрын
Thanks Alex, really admire you....
@Inventerguy162 жыл бұрын
Well now I know one of my subscribers personally I have more motivation to make a new videos and I’ll give you a shout out in the next one
@abelagosi34492 жыл бұрын
Well....I can fix everything going wrong with this and only use one word: Tripod .
@ER1362 жыл бұрын
Love this Jacket
@melissadickerson12842 жыл бұрын
Can you show where to oil the fan ?
@Inventerguy162 жыл бұрын
Unfortunately this fan did not have dedicated oil ports but it did have an exposed motor bushing in the front but if you had to oil the back you would have to take the motor apart in order Oil it but thankfully it uses graphite impregnated copper sleeve bushings so oiling it is not necessary very often
@ceaserelizondo2 жыл бұрын
Just pull up on the swivel latch and swivel up and the seat 💺 lifts up its easy
@runawaypencil12 жыл бұрын
Hey, wanted to know what 30ah battery you got for your nanrobot scooter. I’m having the exact same issue you had with yours.. looking to just replace it. (About 3k miles on mine now)
@Inventerguy162 жыл бұрын
How do you know I had one of the scooters? I never made a video of it. Anyway I got the batteries off of Amazon just look up 52 V 30 amp hour battery and look through and you should be able to find it in less they stopped making them I got mine about two years ago
@runawaypencil12 жыл бұрын
@@Inventerguy16 you have a video on battery replace and balance charging it. Your comments were turned off on that video. But it’s still your channel so I thought I check. Thanks I was struggling to find one and am always gun shy about quality, when it comes to batteries
@Inventerguy162 жыл бұрын
I had forgotten I made that video I’m glad it was useful to you if I find the link I’ll share it with you
@christineadams89042 жыл бұрын
I have the same typewriter do you have a parts manual for it.
@Inventerguy162 жыл бұрын
I never had the manual for it sadly
@503gv22 жыл бұрын
What’s the price for this right now?
@alexandrasolano81822 жыл бұрын
How I can fix my scooter doesn’t turn right or left just go straight
@Inventerguy162 жыл бұрын
Thanks for commenting. If the handlebars are seized up you might need to take Apart the headset entirely in order to free it up otherwise it could be rusted together inside but I would say just spray some PB blaster around the whole head unit in to try to free it up without taking it apart first.
@landergrow44312 жыл бұрын
I have some questions about the G8. Can we connect over email?
@JoshMcInnish2 жыл бұрын
What model is it?
@anthony11132 жыл бұрын
Could you provide a parts list and vendors?
@Inventerguy162 жыл бұрын
Unfortunately there really is no parts list as I built this whole thing from scrap and parts that I had lying around most of which was just junk that I tore apart and use the guts out of to make the unit work and the battery was something that I built
@Inventerguy162 жыл бұрын
Unfortunately there really is no parts list as the whole thing was pretty much built from junk that I had lying around and scrap.
@anthony11132 жыл бұрын
@@Inventerguy16 I understand…I have 2….I’m going to strip one down and completely mod it out
@eleazarfulgencio5262 жыл бұрын
stabled camera will help.
@Inventerguy162 жыл бұрын
I didn’t have a tripod when I filmed this and if I recall I filmed it with a Nintendo 3DS.
@Metroretro5942 жыл бұрын
awesome job! Really smart use of the "license plate" mount
@Inventerguy162 жыл бұрын
If you ask me razor should’ve put a brake light and tail light assembly there from the get-go. The license plate thing is just stupid at least having a light or a reflector would add some form to safety Instead of just being a fake headlight and license plate
@cockangelo65242 жыл бұрын
Where did you get the headlight from and what is it called
@Inventerguy162 жыл бұрын
The headlight was actually the light array from one of those Home Depot garden accent lights. I just tore the whole thing apart down to just the light board unscrewed it into the plastic and wired it through the pre-existing holes
@dand70562 жыл бұрын
Do you still have this golf cart? Could you give me your email? I have some questions for you.
@Inventerguy162 жыл бұрын
Unfortunately I do not still have it is the motor and gearbox starting to wear out and I couldn’t find a new one to replace it with.
@Gordzillion2 жыл бұрын
I wish I knew why this boost convertor is bad or harmful for batteries?
@crownedmedia79363 жыл бұрын
CUHTHSUM i love you man lmaoi
@michaezell46073 жыл бұрын
Ordered mine from amazon but still have to wait up to a week for delivery.
Пікірлер
Down converter is locked, and I cannot seem to unlock it. I have tried to to decode PDF for hours and hours. Powered it up, attempted to set the voltage and it says lock please help.
I made a newer version of this video not too long ago that explains how to lock and unlock it. I actually can’t remember how to do it off the top of my head without having the unit right in front of me. I think it’s my latest video that shows how to do it.
@@Inventerguy16 send me the link to your new video
@@Inventerguy16 can you send me the link to the video on how to unlock my board since it came to me locked from Amazon?
@@TheCommonDanger I’m not sure how to send the link but if you just go into my channel page and go to my videos, it’s the latest video from nine months ago
@@TheCommonDanger the video name is Drok buck converter how to use and program
As a long time mobility chair i love the pronto series, nothing is made better not even close to the quality of invacare made, my all time favorite is the pronto m91
@@thomasennenga6908 i’ve had a number of Invacare chairs that I’ve worked on and for the most part there is solid as a rock. The only thing I wish that they would go to is a different version of controller because the shark series seem to have a thermal throttling problem where they get hot easily under any real hard use. I upgraded one of them with a PG drives controller and it had so much more power. If there’s one of the InstaCare chairs, I really would love to get my hands on. It would be a TDX because those chairs for their weight class are the most capable
@@Inventerguy16 hey what do you think about the universe controllers, melaunch is one and another I can't find a name has joystick controller and control module, have you ever used one of these, I'm a retired mechanic and for the last 5-6 years been buying selling a chair or scooter and repairing for neighbors but started modifying scooter's for speed,
It’s called strikes the hour
😂
Thanks brother. I've had this silly thing for 4 years...use it often...never knew it could do this stuff until now...and after I locked myself out accidentally.
I’m glad I was able to help
Oh wow. Thank you, I can finally use this thing. I've been around a while and have figured out plenty of old Casio watches and even plugged up plenty of old computers where nothing is labeled and every port was just a port and the idea of color coding things wasn't thought up yet, but I still couldn't figure this thing out. So thanks!
nice 😃
I watched your video on KZread I have a 51 and the joystick does not the joystick is plugged in it comes on still won't move but if I unplug the the joystick will not come this was my mother's chair and has been in the garage when we got it for some years ago she just couldn't get the handle of using an electric she like the manual better she passed away two years ago I am in need of a the wheelchair still has his it's a brand new but has been in the garage and very dusty and for about 9 years????? I would like to know if you are still in the business and if you could help me or give me an idea of what might be going on
From what it sounds like it might have a dead battery because that’s typically what happens when the battery is dead or the chair is a neutral which will not allow you to move it while it’s on. If it only turns on when it’s plugged into the charger, then the battery is dead, but if it turns on when the chargers unplugged but still doesn’t move, it’s either a dead battery or stuck in neutral or there’s an error
@@Inventerguy16 do you work on chairs I live in the Columbus Ohio
How do you take the seat off on the 51 I pushed the button on the side up but the seat wouldn't come off or do I just need two people to help
One more thing I charged it over night the light was red in the morning it was green and when I stick the charger in now the light is green as to indicate a full charge but the chair will not come on unless it's plugged up but still won't move
Turn answer your first question. Yes, I do work on Power Chair’s but I live in Texas. And as far as taking the seat off, it probably would require two people because it’s hard to do with one person. And to answer your last question from what it sounds like your battery is actually dead, especially if it will not turn on once unplugged.
Hello, thank you very much for sharing the programming, I was reading the manual and it looks very complicated. I wanted to ask you if you could help me program mine. If you can, I need the following. The input will be 12 V and the output will be 24 V, now if the input is less than 12, can it be done so that the 24 V does not come out? (that it cuts off, or something like that) and the other thing is that it is programmed only at these two voltages, I am only going to use it for this. If you can help me I would greatly appreciate it.
Thanks for commenting and I’m glad it helped. What you’re describing is a step up or boost converter which this is a buck step down converter so you would not be able to get 24 V with a 12 V input you would need 24 V or higher to be able to get 24 V on the output side, I recommend going with a 36 to 48 V power supply in two the unit so that way you have a wider range of voltages that you can program it to
Hello, if what you show in the video is like the one I bought on Amazon, it is also a voltage increaser (boost inverter). My question, if you can help me, is to program it, so that it always has the parameters that I programmed it from the beginning. Thank you very much in advance and sorry for the inconvenience.
I know what you talking about now but the one that you have has a slightly different user interface than this unit so I don’t know how to program that one
You definitely explained this module very well. Much better than the broken English in the user manual. I've had one of these in a box for a few months and today I've decided to try and digest the owners user manual this morning but found your video instead. Thanks for saving me the brain hemorrhage, hopefully I can keep the magic blue smoke contained within the Drok showing me EXACTLY how to program this slightly sketchy but extremely useful tool. CHEERS!
The user manuals that come with these things are often crappy, and they failed to mention certain things. I’m glad my video helped.
Hi Inventroguy16, thanks for posting this video. It is helpful as the internal memory features are not documented very well. Is there a reference manual that explains the settings in detail? Or possible to create one that you could post? Thanks!
Yes it does come with a manual but it’s not very easy to understand. And use the number of these units and I have figured out how to use them easily. Here is the different parameters you can set F0 means safe program so if you sent the voltage and amperage that you want And you click the send button once F0 comes up push the OK button and it will save the parameters you put in. F1 means load program. I believe the unit can store up to 10 separate programs. If you push the send button while in a program and then you cycle to F1 and press OK it will go to the loading screen with lod and a number on the screen the numbers ring from 0 to 10 and depending on which number you pick it will load that program. You can program different voltages and amperage for each program using the F0 function but you have to be already sent to the number that you want those parameters saved in land then go to F0 to save it. F2 is the circuit on feature, where as soon as you plug the unit into supply power the output will be turned on immediately. This is useful if you use it as a charge controller for solar, because as soon as it receives power, it will automatically turn on and start supplying power to your batteries or, whatever you are using it for. If you’re going to be using the unit using a number of different preset, voltages and amperage is, I would not recommend having this feature turned on because it always loads into saved program number zero as default and you have to go in and load the program with the set voltages that you want. I am unsure of what the other F3 & F4 are used for so I wouldn’t recommend messing with them. I hope this description helps I might make another video that goes into better detail of how to program and use the unit now and I have a lot more experience with it.
@@Inventerguy16 Hi, thank you for the explanation. And yes, another video would be cool!
@inventoryguy16 Just ran across this video doing a Google search for a Super 12 I picked up today. My space bar isn't working - how do I remove the bezel that covers the keyboard so I can get a peek in there?
Is this a triple chime mantel clock?
Yes, it’s a triple chime clock. It has the Westminster and in Saint Michaels, and one other chime I can’t member the name of. I I still have the clock, and I occasionally listen to it from time to time.
@@Inventerguy16 well the last chime is the Whittington chimes.
@@yuhaszvideotime763 thanks I was wondering what it was I personally like the Westminster chime the best
I just got one as my first Columbia jacket, thanks for your sharing!
No problem I’m glad you liked the video. It’s a shame that they stopped making this one.
We miss you how get power wheelchair you get for free or buy it how much cost
I get them on Facebook marketplace broken normally and fix them and either sell them or keep them. I normally don’t spend anything more than $200 on each chair that I buy from Facebook marketplace.
@@Inventerguy16 Oh
Please send me link we’re you bought your after market d4+3 nanrobot battery 🙏 thanks brother 😉
I bought it on Amazon but I have long since lost the link probably just look up 52 V 30 amp hour battery and you might find it. It’s kind of an off the shelf part so there’s probably different variants of it.
Stay strong 💪
Hello I seen your nitro speeders showcase from years back, I’m wondering if you’re willing to sell it? It was my childhood dream toy when I was younger, I would love to buy it from you
are these still buyable?
Maybe on eBay they discontinued them a long long time ago
@@Inventerguy16 thx dude
@@Inventerguy16 50$ usd you interested?
@@Inventerguy16 this was my dream toy as a kid, never got it on holidays tho because they got discounted
Unfortunately, I don’t have it anymore. I lost it when we moved a few years ago.
The upgrade one, how much? Thanks for your videos love them I will share them!
We’re did you buy your d4+3 nanrobot battery? Please and thanks 🙏
Battery that I bought was not made for it. It was just a generic 52 V 30 amp hour batteries that I made a external housing for. But I bought it on Amazon for about 500.
@@Inventerguy16 can you please share link
This is great.
I’m glad you like it. The scooter was probably the best of the sleepers and I’ve ever built besides my electric micro bike
I have a solar panel whose Voc (51.4V) exceeds the limit on the charge controller (45V). Isc is fine (9.8A). The controller can handle more than 15A. Since the input is from a solar panel, the V varies. Can I use this to limit the voltage into the charge controller to 45V? If the V in is less than 45V, will the actual voltage pass through? Finally, if I set the current to 10A, can you foresee any problem?
You can use it to step down the voltage for your solar system, but I wouldn’t recommend pushing 10 A without improving the cooling system for the converter because the fan it comes with is garbage it can do 10 A at 45+V they will immediately overheat if there’s not a good amount of air circulation being blown across the heat sink but if you solve the cooling problem, it shouldn’t have any issues running at 45 V at 10 A
You can change it to miles. press the up and down arrow keys at the same time. This is the setting menu there are 8 pages/screens. Press the middle key to switch between setting screens. Go to p4 and change it from 0 to 1.
I actually did go through the settings and try all that and none of them did it on that particular unit mind me I’ve just been messed up but I was never able to get it to switch from kilometers to miles. Unfortunately that thing is long since I’ve been gone someone stole it from me at an H-E-B
I dropped my Patton U2-187 14" high velocity fan. The cover popped off, the blade hit and got scratched, and one blade bent a little so it vibrates like crazy! Is there any way I can align the blade? I tried bending it, lol. Very strong steel. The motor is perfect, not used a lot. Thank you for any advice! Also, how do I get the cover back on?
The blades are incredibly hard to bend you will probably need to use a vice or some channel locks to be able to get enough of a grip on it to be able to bend it back. As for the cage, it might just snap back on unless it has screws that got stripped out when it fell.
good lord, just buy a $6 ribbon, it will last years
Hi, i enjoyed your video, It answered some questions I had, since I got it used as a gift 3 years ago. Do you know where I could source a new joystick controller for this model?
Thanks for commenting! I’m glad you enjoyed the video. In regards to your question there’s a website called www.monsterscooterparts.com they have all of the different styles of controllers enjoy sticks for these Power Chair‘s. It’s a unit you have one that has a skinny wire coming from the joystick or is it a fat one? If it’s a skinny wire it would be a different model controller than the one that’s on my Power Chair. The units with the fat wires have all in one controllers where the controller is in the joystick itself instead of being a separate module on the Power Chair.
Exact same color and style of mine. Glad i found a video
Yo, I own one of these and it starts and stops now, where for years it could run for weeks at a time with no issue. Any tips on fixing it up?
You might want to take the motor off and clean the motor shaft and bushings and check if there’s any debris inside that could be stalling it out
Thanks Alex
Great review on the various chairs 💺, I learn a lot by just watching your videos. Thanks
I’m glad you like them the Invacare pronto series of power chairs are really good they’re basic and simple to use but they’re well-built
Thanks Alex, really admire you....
Well now I know one of my subscribers personally I have more motivation to make a new videos and I’ll give you a shout out in the next one
Well....I can fix everything going wrong with this and only use one word: Tripod .
Love this Jacket
Can you show where to oil the fan ?
Unfortunately this fan did not have dedicated oil ports but it did have an exposed motor bushing in the front but if you had to oil the back you would have to take the motor apart in order Oil it but thankfully it uses graphite impregnated copper sleeve bushings so oiling it is not necessary very often
Just pull up on the swivel latch and swivel up and the seat 💺 lifts up its easy
Hey, wanted to know what 30ah battery you got for your nanrobot scooter. I’m having the exact same issue you had with yours.. looking to just replace it. (About 3k miles on mine now)
How do you know I had one of the scooters? I never made a video of it. Anyway I got the batteries off of Amazon just look up 52 V 30 amp hour battery and look through and you should be able to find it in less they stopped making them I got mine about two years ago
@@Inventerguy16 you have a video on battery replace and balance charging it. Your comments were turned off on that video. But it’s still your channel so I thought I check. Thanks I was struggling to find one and am always gun shy about quality, when it comes to batteries
I had forgotten I made that video I’m glad it was useful to you if I find the link I’ll share it with you
I have the same typewriter do you have a parts manual for it.
I never had the manual for it sadly
What’s the price for this right now?
How I can fix my scooter doesn’t turn right or left just go straight
Thanks for commenting. If the handlebars are seized up you might need to take Apart the headset entirely in order to free it up otherwise it could be rusted together inside but I would say just spray some PB blaster around the whole head unit in to try to free it up without taking it apart first.
I have some questions about the G8. Can we connect over email?
What model is it?
Could you provide a parts list and vendors?
Unfortunately there really is no parts list as I built this whole thing from scrap and parts that I had lying around most of which was just junk that I tore apart and use the guts out of to make the unit work and the battery was something that I built
Unfortunately there really is no parts list as the whole thing was pretty much built from junk that I had lying around and scrap.
@@Inventerguy16 I understand…I have 2….I’m going to strip one down and completely mod it out
stabled camera will help.
I didn’t have a tripod when I filmed this and if I recall I filmed it with a Nintendo 3DS.
awesome job! Really smart use of the "license plate" mount
If you ask me razor should’ve put a brake light and tail light assembly there from the get-go. The license plate thing is just stupid at least having a light or a reflector would add some form to safety Instead of just being a fake headlight and license plate
Where did you get the headlight from and what is it called
The headlight was actually the light array from one of those Home Depot garden accent lights. I just tore the whole thing apart down to just the light board unscrewed it into the plastic and wired it through the pre-existing holes
Do you still have this golf cart? Could you give me your email? I have some questions for you.
Unfortunately I do not still have it is the motor and gearbox starting to wear out and I couldn’t find a new one to replace it with.
I wish I knew why this boost convertor is bad or harmful for batteries?
CUHTHSUM i love you man lmaoi
Ordered mine from amazon but still have to wait up to a week for delivery.