Пікірлер

• 
  @jamesmeredith381Күн бұрын

  Has anybody ever used Lego pieces to build an actuator for the ramps

• 
  @ModelMarvelsКүн бұрын

  Not sure there would be room to fit the lego motor which plugs into the actuator to operate it

• 
  @WarlockCore25 күн бұрын

  Nice, Does it have interior?

• 
  @ModelMarvels25 күн бұрын

  Yes both the cockpit and the "pod" have interiors!

• 
  @cazadonАй бұрын

  the toyota body has lots of adaptors to use on differant chaissie like the scx10 and the trx 4

• 
  @ModelMarvels25 күн бұрын

  The jeep has no fittings at all!

• 
  @cazadon24 күн бұрын

  @@ModelMarvels did not know that was always more interested in the Toyota body

• 
  @davidburke5686Ай бұрын

  I haven’t heard anything good about this chassis, but then who makes a fully plastic chassis these days

• 
  @ModelMarvelsАй бұрын

  And charges a premium for it!

• 
  @hollyhillrcАй бұрын

  Despite all it's faults I have to say it's a very good looking RC, but WOW you weren't kidding when you said it's loud!

• 
  @hollyhillrcАй бұрын

  Thank you for your refreshingly honest opinion and review about this Giles. It's been very helpful in saving me a big lump of cash. Oh, and you may be interested to hear that your old Carisma Coyote is still enjoying life here at Holly Hill 🙂👍🏼

• 
  @ModelMarvelsАй бұрын

  Thanks. It performs better than expected but is so much money for what it is. That's awesome about the Coyote - keep thinking about doing another for myself as it is such a well priced performer.

• 
  @annenoel2156Ай бұрын

  Brilliant!

• 
  @hollyhillrcАй бұрын

  Hi Giles. I'm very interested to hear your opinion on the Mercury. I've been thinking of buying one but I'll wait and watch your video about it first.

• 
  @ModelMarvelsАй бұрын

  Hiya. To give you a quick heads up, key parts were missing with no form of customer support to get replacements. We cannot get the diff. lock system to work - major mods needed (seems to be a common issue) and it is wickedly expensive for a plastic chassis and very thin body. Could just be ours and needs bedding in but the noise the gearbox makes is LOUD!

• 
  @momothemilkmanАй бұрын

  That look amazing! Nice work!

• 
  @ModelMarvelsАй бұрын

  Thanks. I think a remote control 1/16 scale S tank is going to be the next print!

• 
  @user-tj1tn9cf8h...BRIAN-HARVEYАй бұрын

  You know folks, I personally wouldn't mind, walking through a full sized functioning eagle. Someday. Maybe an architectural wizard, might be willing to create this very first, space 1999, eagle portal home. 😊😊 ✝️ 😊😊

• 
  @ModelMarvelsАй бұрын

  That does sound very cool. I can just imagine youngsters sat in the cockpit having their imaginations stimulated!

• 
  @Papinak22 ай бұрын

  Awesome, thanks for sharing, love to see each iteration of my model, as it inspires for more improvements in the future :) Little update since the last time, I made a new version, that apart from other changes, addresses the same issue you had with the rear overhang. The reason why I originally modelled it like this was to keep the original geometry and hardware from the kit. Newer model further improves compatibility, but also adds modularity, which allows for more customisation.

• 
  @ModelMarvels2 ай бұрын

  HI. We will give it a run out asap but thanks for taking the time and making the files available. Great Job!

• 
  @Papinak22 ай бұрын

  ​@@ModelMarvels Thank you :)

• 
  @josegoncalves50482 ай бұрын

  Where did you get your files from?

• 
  @ModelMarvels2 ай бұрын

  Hi. The files are available here from Gambody:- www.gambody.com/3d-models/eagle-transporter

• 
  @josegoncalves50482 ай бұрын

  @@ModelMarvels thanks 👍

• 
  @ModelMarvels2 ай бұрын

  @@josegoncalves5048 👍

• 
  @martinsabathy33363 ай бұрын

  This is absolutely cool 💪👌👍

• 
  @ModelMarvels3 ай бұрын

  Thanks. Keep an eye out. The Back to the Future version is almost done and it is even better.

• 
  @wooow85433 ай бұрын

  I just got the m5c. The sale was insane on it. I'm still trying to dial it in as most my prints are failing. Whenever I print something from the app it's fine, but when I print it from the slicer it doesn't work. it's still really solid and when the prints work they are way better than my old printer.

• 
  @ModelMarvels3 ай бұрын

  Are you using the old slicer or have you moved to the newer Ankermake Studio. Just set some TPu to print here. Try turning your build plate over (just in case its dirty). Yeah, really solidly built, prints just as well as the Bambu. What won't print on one machine will always print on the other!

• 
  @Del-Canada3 ай бұрын

  I had a much smaller model around 45 years ago. I wish I saved all of that stuff.

• 
  @Del-Canada3 ай бұрын

  Also, are you Sean Harris?

• 
  @ModelMarvels3 ай бұрын

  @@Del-Canada Hi. I think I may have had a diecast version many decades ago - probably worth something now if it hadn't been "crashed" numerous times! and no who is Sean Harris 🙂

• 
  @Del-Canada3 ай бұрын

  ​@@ModelMarvelsEnglish actor. You look and sound like him. Lol

• 
  @ModelMarvels3 ай бұрын

  Cool. Perhaps it's the beard;-)

• 
  @FleetAdmiral2153 ай бұрын

  Absolutely Brilliant !!!!!! Why hasn't anyone remade this show? It'd be a Huge Hit !

• 
  @pinkze3 ай бұрын

  pinkze he say " first❗️( and foremost) i need this ! "

• 
  @pinkze3 ай бұрын

  pinkze he say " you're only supposed to...build an epic ! Love it 🎉😊❤"

• 
  @DoktorTechnometer4 ай бұрын

  Ta - the regulator lift and turn may be standard but that was not in the instructions in my box - and as first compressor I did not know the standard - so thank you as without this I wouldn’t be using it at all.

• 
  @ModelMarvels4 ай бұрын

  No problem. Glad you are up and running

• 
  @DargoDog4 ай бұрын

  That is awesome!!! I have one that I converted, threw my own axles under it, and has powered ramps and landing gear. It works well, but it is super short, which is ok, I like the way it turned out (a video of it is on my channel). I am in the process of building another, I have a new trailer (with ramps this time), and I want to extend it out a ways. How much did you add to the middle? How did you cut it? Looking for a good method to get it square from the get-go.

• 
  @ModelMarvels4 ай бұрын

  Thanks. we will check yours out when we get the chance. Don't worry to much about cutting the trailer straight although a sliding mitre saw would make life easier, as you will be able to hide an uneven cut when you lay in the new deck piece or even recover the whole deck. It's long gone now but measuring from the video we cut in 2/3 the length of the original deck (so if the deck was 30cm we added in 20cm roughly). Hope this helps.

• 
  @2150dalek4 ай бұрын

  Why are they so popular? Just look at 'em. You can fill those d@mn pods with buckets o' Crispy Chicken, Camping gear, Rifle rack and 6 drunk friends.

• 
  @michaeldunner78914 ай бұрын

  Can it work with a 360 degree turret

• 
  @ModelMarvels4 ай бұрын

  If the turret is big enough to fit all the components it should not be a problem but if you have to mount any part of the system in the hull, then it is a a definite no.

• 
  @jamesturncliff59604 ай бұрын

  What a great job it would be fantastic somebody would build a EDF drone version of that

• 
  @Workerbee-zy5nx5 ай бұрын

  Its a shame NASA couldn't build something like that..

• 
  @ModelMarvels5 ай бұрын

  It would be awesome if NASA made a "space bus" type of space only shuttle that looked like the Eagle and it would garner a lot more interest and inspire the general public.

• 
  @Workerbee-zy5nx5 ай бұрын

  @@ModelMarvels absolutely, Brian Johnson should have been hired at NASA to consult on starship looks.

• 
  @MrAgustos5 ай бұрын

  fantastic work man! I loved that show they had the best hand blasters!

• 
  @ModelMarvels5 ай бұрын

  Thanks - thinking of doing another half the size when the Galactica is finished

• 
  @Garrett0535 ай бұрын

  That is very cool for sure! I am a big fan of the terminator series, and would certainly display that figure in the workshop although if it is not perfect. nice job!

• 
  @ModelMarvels5 ай бұрын

  Thanks. We may revisit this build in the future to see if we can make it work!

• 
  @ModelMarvels5 ай бұрын

  👍

• 
  @jhondrinkwater75065 ай бұрын

  Can I use the airbrush while the tank fills up?

• 
  @ModelMarvels5 ай бұрын

  Hi. Yes, no problem at all. Just keep an eye on your air pressure - if you do a lot of continuous spraying and the pressure drops to far it may spoil your work.

• 
  @jhondrinkwater75065 ай бұрын

  @@ModelMarvels thanks a lot

• 
  @louiesworkshop20236 ай бұрын

  Hi, am looking to buy this body for my carisma crawler chassis, however my beedlock wheels are ,120mm would this work, brilliant video. Thankyou regards Louie

• 
  @ModelMarvels6 ай бұрын

  Hiya and thanks. We actually started off with 120mm tyres and they just looked far to big (they are now on the Bronco) so we had to swap to 110mm in the video

• 
  @Reds3DPrinting6 ай бұрын

  did you wash you bed with soap, water and then wipe with 90 alcohol?? Once you get the bed adhesion figured out itll be a flawless machine.

• 
  @Kratom70302 ай бұрын

  I have the problem that after I clean the print bed with isopropanol, the adhesion to the print bed is terrible. What works best for me is just soap and water, after which I almost can't get the parts loose anymore. (in a positive way😀)

• 
  @pinkze6 ай бұрын

  pinkze he say " sure is a sleeper, great flex and about 45 degrees hill climb, another top build 😢😊❤🎉"

• 
  @pinkze6 ай бұрын

  pinkze he say " as always, the awesome builds never cease🎉❤😊"

• 
  @kevinputry56556 ай бұрын

  That is beautiful!

• 
  @ModelMarvels6 ай бұрын

  Thank you.. Several more builds from Galactica and Trek in the pipeline

• 
  @kevinputry56556 ай бұрын

  Cool! Original Galactica I hope?@@ModelMarvels

• 
  @ModelMarvels6 ай бұрын

  @@kevinputry5655 , hehe, of course!

• 
  @pinkze6 ай бұрын

  pinkze he say "awesome, love it 🎉😊❤"

• 
  @StaticFreighter1236 ай бұрын

  hello are would you be intrested to make a discord server for your youtube channel where you can interact with your members and get insights

• 
  @ModelMarvels6 ай бұрын

  Hi That is certainly something to think about! Because our work is so time consuming every post/video etc on social media eats into the time we can spend actually creating something.

• 
  @StaticFreighter1236 ай бұрын

  @@ModelMarvels of course you can also get us to make you a standard set up so that you don’t have to work on setting it up

• 
  @muffdiver49737 ай бұрын

  Hi. Which do you think is the better rig? The MST CMX or the CFX? And why?

• 
  @ModelMarvels7 ай бұрын

  Hi. Have you watched our CMX vs CFX video? The CFX is newer and arguably more technically competent but it does lose out in the climbing test although it has more articulation at the cost of getting hung up! Same tyres, battery and electronics on both.

• 
  @suit13377 ай бұрын

  just work on your bed adhesion, this part should not be a problem for either printer - i assume the error lies in the user here ;)

• 
  @ModelMarvels7 ай бұрын

  The A1 is a fantastic printer, really starting to love it. Our version has bed adhesion issues of parts sticking to well, making them hard to remove. However, this was a test; both printers using the same filament, running at the same speed, same infill etc.

• 
  @theoneand0nly8747 ай бұрын

  Tree supports are needed on the bambu a1

• 
  @walrusman707 ай бұрын

  cool

• 
  @ModelMarvels7 ай бұрын

  Thanks!

• 
  @aquatalk66617 ай бұрын

  Well, poop happens. You're judging by one attempt?

• 
  @dtibor59037 ай бұрын

  You can tweak the settings to fix those issues. Most likely bed temperature and cooling was incorrect. Also you can use the same slicer and get similar results. I use Orca slicer, a fork of Bambu studio for Ender 3 v 2 and I get very good results. Most of the settings you can copy from prusa presets and they will work fine

• 
  @ModelMarvels7 ай бұрын

  Hi. It was only this print that caused an issue, wondered if there was a draft but glad ZED_gaming noted he had the same issue. Every other print comes of the M5c flawlessly.

• 
  @ZappingBlaze-BS7 ай бұрын

  Understandable!! I have the exact same problem so i sent back the Ankermake M5C and ordered the Bambulab A1 2-days ago

• 
  @ModelMarvels7 ай бұрын

  Hi. Will eventually get around to a head to head comparison but I don't think there will be much/any difference in quality of prints.

• 
  @leokimvideo7 ай бұрын

  Yes

• 
  @Yorkie-96687 ай бұрын

  Erm hard one, get a single colour printer for the same money as a 4 colour one, but the 4 colour one has more plastic, yes a hard one, not! 220x220x250 vs 256x256x256, even in just 1 colour guise the A1 is far better priced, only a fool would choose the Anker

• 
  @ModelMarvels7 ай бұрын

  HI. Disagree. In the Uk the Ankermake is often discounted to around £330, the Bambu A1 is £509 with the AMS Lite and still £369 without. If it were not for the large build plate on the Bambu it would be going back. The AnkerMake produces equal if not better prints (certainly more often) than the Bambu. It is early days for the Bambu and we have only completed about 40 hours of printing but we are not liking the vibrations the Bambu causes in everything around it - a 10kg laser printer on the same heavy duty stand is getting vibrated beyond belief. Also bambu only accept returns of boxed unused items. In short don't believe the hype of all the paid promotions out there.

• 
  @Yorkie-96687 ай бұрын

  @@ModelMarvels Just blown your own attempt of a response by stating the Anker is available at a discount, wonder why that is? And as for the Bambu being less reliable with finished prints, you really need to spend more time with it before giving a pathetic review, I have had my X1C for over 6 moths and it has never once let me down, as for the paid reviews, if you'd spent any time on the Bamby Lab forums you's realise what you are saying is 100% rubbish, maybe you will be ok with the Anker, enjoy

• 
  @ModelMarvels7 ай бұрын

  Hi@@Yorkie-9668 As with many business models manufacturers offer discounts, such as Bambu are doing with the P1p & X1 models currently. I whole heartedly agree, more time with the A1is needed, these are early days with the A1 but we can only give out honest initial impressions comparing these printers. Your X1C is a very different beast from the A1 as reflected in the price and if we could justify it an X1 would be sat here!

• 
  @redavatar7 ай бұрын

  Plastic by itself is not a bad thing. It brings down weight on the print head ergo less artefacts on your prints. Plastic on the body is irrelevant since it doesn't impact print quality so I wouldn't actually hold that against it. I was initially interested in the M5c as well and very nearly ordered it but with the A1 Mini being announced the temptation of multi colour prints was too high - I now have both the A1 Mini and the A1 and they're really wonderful printers. After printing for 5 years on various machines, this is the first printer where I hit print & don't even bother checking the first layer.

• 
  @ModelMarvels7 ай бұрын

  No argument here, although all the use of plastic does mean the A1 shakes a sturdy table enough to cause other items to "walk"; the Ankermake is just so solid! Both printers are a step above the likes of Tronxy, Elegoo and other bed slingers. I think these are printers number 13 and 14 in a long list and both are excellent, they just take slightly different approaches to achieve the same result. Looking forward to printing the same filament at the same speed on each machine to see which wins. The Bambu workflow is really good but pipped by the Ankermake (at least it was until they replaced their Beta slicer with the Studio version). Both machines print flawlessly although I am already noticing an issue with prints not releasing from the bed on the Bambu. First printer was the Eaglemoss Partwork, back in 2015 which seems a lifetime ago - glad things have improved, hehe.

• 
  @j.lietka94067 ай бұрын

  That came out great! Are you going to add additional markings?

• 
  @ModelMarvels7 ай бұрын

  Hmm, not sure yet. Have to do some repairs first. We resin printed all the engine parts (except nozzles) and they are sagging under their own weight - so an fdm reprint is required!

• 
  @j.lietka94067 ай бұрын

  @@ModelMarvels it still came out top notch!

• 
  @ModelMarvels7 ай бұрын

  @@j.lietka9406 Thanks! Prints should only get better from here on as we have moved over to an Ankermake M5c and a Bambu A1

• 
  @tyronenewman4557 ай бұрын

  P r o m o S M

• 
  @sliverwind13098 ай бұрын

  May I ask do you still have and how well has it run of late please may I have on update Video please

• 
  @ModelMarvels8 ай бұрын

  I will get on that for you, as we still have it and it is still going strong. Part way through spraying a 3D printed Battlestar Galactica (black at the moment for light blocking, so several coats of white required).

• 
  @sliverwind13098 ай бұрын

  @@ModelMarvels I will keep eye out for it

• 
  @John.3498 ай бұрын

  It's pretty loud

• 
  @ModelMarvels8 ай бұрын

  Depends what you compare it to! A garage compressor - much louder, a desk fan on full power - probably quieter.

• 
  @Papinak28 ай бұрын

  There are files for a 3D printed conversion, that moves MF01X's motor in front of the rear axle. That would fit much better :)

• 
  @ModelMarvels8 ай бұрын

  Thanks. Will have a look for them but sadly we couldn't find anything like that when we built this. Perhaps a new body is in order!

• 
  @Papinak28 ай бұрын

  @@ModelMarvels now I noticed I wrote front axle, I meant in front of rear axle 😀

• 
  @ModelMarvels8 ай бұрын

  @@Papinak2 I have found some files to move the motor in front of the rear axle and have added this to the "To Do" list. 😀. Thanks for letting us know!

• 
  @Papinak28 ай бұрын

  @@ModelMarvels NP, btw, there might be an improved version of the conversion soon :)

• 
  @ModelMarvels8 ай бұрын

  @@Papinak2 Nice! looking forward to it. Just ordering the extra parts you list. Also, good job👍