Пікірлер

• 
  @badgoy84392 күн бұрын

  Why do you remove so much mortar? Wouldn't the wall be stronger if it was pointed almost to the outside edge of the brick?

• 
  @JayKTSКүн бұрын

  Hello mate .. in Belgium we like to joint or point the brickwork afterwards in the desired style and color .. that’s why we take the mortar out .. cheers

• 
  @JayKTSКүн бұрын

  Example kzread.info/dash/bejne/d6eI1pd6f66qpKw.htmlsi=wKmRM0v7QsRIhhpL

• 
  @badgoy843916 сағат бұрын

  @@JayKTS wow, that's really something, cheers mate

• 
  @badgoy84392 күн бұрын

  nice to see real structural masonry still being built

• 
  @patrickdaly212117 күн бұрын

  Total disregard for health and safety.

• 
  @patrickdaly212117 күн бұрын

  It’s not the falling you need to worry about. It’s the landing. That’s what normally kills you!

• 
  @SeitoTNT21 күн бұрын

  kutya aranyos 🐶🥰 \ 🟫🟥🟥🟥🟥 🟫⬜⬜⬜⬜ 🟫🟩🟩🟩🟩 🟫 🟫 🟫

• 
  @JayKTSКүн бұрын

  Yes it’s a nice dog ♥️🐶

• 
  @shinlee257924 күн бұрын

  dangerous job brother, thanks a lot for sharing your skills

• 
  @JayKTS23 күн бұрын

  Thanks bro much appreciated ;)

• 
  @markshoemaker4619Ай бұрын

  What’s with the big ass dip, the form on the right must have been cut by a rookie.

• 
  @JayKTS29 күн бұрын

  Cut by the owner of the house

• 
  @bartbauwens2449Ай бұрын

  Jay ? Woa zitte gijj jom? 😢😅

• 
  @JayKTSАй бұрын

  Hey bart .. ik ga binnenkort terug filmkes posten makker ;) moet wel want al mn geheugen zit stampvol lol .. heb even een pause ingelast ik zat prive even in een lastige periode ;)

• 
  @bartbauwens2449Ай бұрын

  @@JayKTS Tuurlijk, dat gaat voor!! 😉

• 
  @hiimawasteoftime8678Ай бұрын

  Great work. Where are you from

• 
  @JayKTSАй бұрын

  Thanks man ;) I’m from Belgium 🇧🇪

• 
  @gprn3Ай бұрын

  Hello, well done, its a clean roof. Could be really more complicated when you are in a renovation situation with not so squared base but yes, you explain very well here the method for tiles roofing.

• 
  @JayKTSАй бұрын

  Thanks a lot mate ;) 🙏🏼😎

• 
  @LR52VUUАй бұрын

  Brick slips Sir. How much are they per square meter in Belgium? Brick slips are thin bricks which are stuck on walls.

• 
  @peppie642Ай бұрын

  Mis je video’s vakman!

• 
  @ianbarker6342 ай бұрын

  Heh jay. How’s it going bro. You got any new vids coming soon

• 
  @JayKTS2 ай бұрын

  Hello Ian nice to hear you man :) yes I’ve got some footage for you guys I just need to start editing some .. thanks for the reminder 😉… have a good one bro ✊🏼

• 
  @remyrosati81242 ай бұрын

  Hello Jay, Can i contact you ?

• 
  @jamescox41772 ай бұрын

  That is awesome work my friend 👍👍👍👍👍

• 
  @JayKTS2 ай бұрын

  Thanks a lot man cheers bro 🙂

• 
  @SedriqMiers3 ай бұрын

  This brings back memories of my welding days.

• 
  @kevocos3 ай бұрын

  Hey Jay, no uploads from you for a while hope all is well with you buddy.

• 
  @JayKTS2 ай бұрын

  Everything good mate I’ll get into it soon ;)

• 
  @sheaseihcf19083 ай бұрын

  When New video’s

• 
  @JayKTS2 ай бұрын

  Yes I know it’s about time I need to start editing ;)

• 
  @davejohnston51584 ай бұрын

  Thats a big unprotected edge on your gutter. A long way to fall! You must be daredevils in Belgium. Thanks for your advice on the setting out. Nevel knew there was so much wiggle on the side laps!

• 
  @JayKTS3 ай бұрын

  Cheers buddy much appreciated !

• 
  @AlbertoPerez-qv8en4 ай бұрын

  Donde puedo conseguir la trowel

• 
  @AlbertoPerez-qv8en4 ай бұрын

  Cómo le hago para comprar una cuchara de esas

• 
  @AlbertoPerez-qv8en4 ай бұрын

  A dónde comprar esa paleta

• 
  @JayKTS4 ай бұрын

  You can find the Jung trowel on a website called eurafco I believe … the rose buttering trowel I ordered at speedcrete in the UK

• 
  @AlbertoPerez-qv8en4 ай бұрын

  @@JayKTS Muchas Gracias de Carolina del Norte USA! -Alberto

• 
  @AlbertoPerez-qv8en4 ай бұрын

  Como se llama la cuchara pequeña

• 
  @TC-rk9vu4 ай бұрын

  Jay………1UP ! -- It’s fair to say we miss your posts on KZread. Hope you’re doing well whether it’s in welding but that brickwork is awesome. Have a great winter. TC✅🌟

• 
  @JayKTS4 ай бұрын

  Yo bro ! Thanks a lot man really appreciate it :) .. i do have some footage from work though need to make some time to edit been busy lately with my hobbies haha .. cheers mate

• 
  @user-ph4sr3jy2k4 ай бұрын

  Goed gedaan, ik zal binnenkort hetzelfde doen. Ik vroeg me af wat je onder de blauwsteen doet met jou voegspaan, is dit gewoon mortel of stabil? Dit is om de blauwsteen wat op te houden vermoed ik. grtz

• 
  @JayKTS4 ай бұрын

  Is gewone mortel ;)

• 
  @Trekz865 ай бұрын

  Im confused as to what uoue job is. Are you a bricklayer or builder or plumher or renderer or plasterer hahaha you seem to do in it all very well. Nice work my friend ✌️

• 
  @JayKTS4 ай бұрын

  I call myself a bricklayer mate ;) thanks a lot brother 😁🙏🏼

• 
  @toecutter10155 ай бұрын

  Is there any country that doesn’t make the USA look like a Joke? I really like seeing the skill and ability of the Real Ones and it’s sort of a relief to see that the Trade Isn’t dead and gone like in No Standards USA

• 
  @JayKTS4 ай бұрын

  Man thanks a lot brother :) trade isn’t death for sure around here we keep pushing it .. the usa has a lot of cool things though want to visit your country some day .. have a good one bro 😎

• 
  @mastersamurai76833 ай бұрын

  Plenty of excellent bricklayers in North America. I think what your saying is more of a social commentary about the bar sliding all over the world in almost any facet. I've worked with bricklayers from all over the world...some acceptional, some complete chancers

• 
  @toecutter10153 ай бұрын

  @@mastersamurai7683 it’s actually more of a political thing on levels beyond belief or even attempting to explain to most Americans now would be almost impossible Those who know KNOW I was in the woke broken no merit no standards liberal run BAC union for 3 decades and could tell So many things that would be beyond belief to most Real tradesmen in so many other countries. There’s obviously respect sense and sensibilities and Sanity in Merit based High Standards Nations Like England and a few others I see on U tube. The only ones who really make money and have year round employment job security etc are the Union representatives business agents and whoever else and I have No idea ( even after 30 years) what most of those self entitled golf course boys do ( except travel around and play golf) it’s quite mind boggling to me seeing how radically extremely different the bricklayer trade is like so many other skill trades Standards are non existent nowadays in America and that’s the main reason why a guy like TRUMP is So popular now no matter how hard the liberal owned media tries to trash him

• 
  @mastersamurai76833 ай бұрын

  @toecutter1015 without a long winded retort I'll agree by saying, wow...we speak the same language. I would have a slightly more conspiratorial explanation in which I believe this is all being made to happen and there's no difference between the left and right, it's the illusion of choice. The powers that be are simply explaining to us how we got where they had planned all along. Back to bricklaying. I think it's a lot about perception and personal integrity. If you don't know what a good bricklayer is and aren't taking the steps to get there...your ignorant. Personally I'm always trying to get better and learn as much as possible. We're a very sick and poisoned society and most can't see the forest for the trees.

• 
  @toecutter10153 ай бұрын

  @@mastersamurai7683 if I were to attempt to explain the corruption sleaziness Race baiting and so many other political engineered things that have been going on for over 60 years now to the very liberals who benefit from it They would Not even attempt to understand it or even try to call me a conspiracy theorist or much worse Anyone who Speaks out about “The System “ automatically sounds that way to many But Without Standards and a merit based system There’s got to be another type of system in its place Which is “ the swamp “ that the USA is now. I was racially discriminated against ( just like So many others) in America for being a White Male My own “ union “ would never let anyone become a union contractor who would actually do the work themselves especially specialty skills type stuff Ive been on many jobs over the decades ( long since retired now) where I could have Easily done the entire simple thing myself and had way better tools and equipment way better safer scaffolding etc than most of the sleazy corrupt contractors and made more money in a few weeks than I make all year but liberal run controlled unions like the BAC won’t allow it They use union jobs for Dumping grounds for Special needs affirmative action and the Dreaded Create a jobs Literally Fake people fake tradesmen fake contractors fake teachers fake whatever I worked with guys older than me way back who came from generations of tradesmen immigrants Who in Any other country would probably have been Contractors with their Sons and whoever else who Actually Does the Work. Skills and generations of knowledge have No place in the Fake News liberal system they don’t mix well with arrogant clueless self entitled ones. Union contractors get away with charging millions for nonsense epoxy injection urethane injection all kinds of Chemical garbage injections into hair line cracks in concrete 3 stories below ground and all kinds of other snake oil . Liberals in America are So Spoiled Rotten from getting away with murder for So long now that they have become entitled beyond belief and as far as the left vs the right Yeah in a way you are right depending on what state or area it doesn’t matter States like NY ( one of the worst) will always be liberal and will only get worse and it doesn’t matter who’s in the president office We who are left that actually care about the trades realize that we needed someone like Trump 30 plus years ago shits way too far gone now and the changes needed would be way too “ Radical “ for broken USA but we appreciate anyone who speaks out politically about the Swamp draining The fact that Liberals have a problem with “Make America Great again “ Why?? Liberals are hell bent on destroying the nation Open Borders Let Them Loot Mexican border jumpers on Union jobs getting on the job training with their faces all covered like bandits in a country loaded with seasonal workers struggling I have decades of unbelievable shocking no standards no Safety No inspectors Ever pictures of Shit Work by anyone’s standards outside America I need to get someone to Put some of it out on u tube for the world to see

• 
  @Trekz865 ай бұрын

  If you were in australia you would make some really good money my friend. The way they build here in melbourne is anjoke compared to what ive seen you do. Great work brother

• 
  @JayKTS5 ай бұрын

  I wanted to go like 12 years ago but regulations were difficult for me at that time because of my age , I needed to do an English course which is ridiculous because I can talk and write it , now it’s more easy I’ve heard , cheers man thanks a lot ;)

• 
  @memofrf5 ай бұрын

  Exceptional work as ever my friend. Thank you.

• 
  @JayKTS4 ай бұрын

  Thanks a lot brother ;)

• 
  @Trekz865 ай бұрын

  " i feel conplete now " hahaha love your videos beother 😂

• 
  @waltertenboske81475 ай бұрын

  Great work, beautiful!

• 
  @JayKTS5 ай бұрын

  Cheers thanks man ;)

• 
  @waltertenboske81475 ай бұрын

  What a great series again, Jay. Incredible what you guys create, learning a lot. Keep up the good work! 👌

• 
  @JayKTS5 ай бұрын

  Thanks a lot Walter , happy to hear that ;) 🙏🏼

• 
  @Trekz865 ай бұрын

  You finish at 7!!?? What time do you start ?

• 
  @JayKTS5 ай бұрын

  It can happen we work late but normally we work till 5pm ? Start around 7h30

• 
  @jamiegrowthanddevelopment96646 ай бұрын

  Bro beautiful work that is the skill level i hope 1 day to have 🤘😎🤘🇺🇸

• 
  @JayKTS6 ай бұрын

  Yo Jamie thanks a lot brother much appreciated man cheers ;)

• 
  @Thomas-pq2qz6 ай бұрын

  Wild bond,and then some.Shit material but looks good on masse.

• 
  @user-qp7gb8db9u6 ай бұрын

  Косяки есть , но я и сам так делаю 😊

• 
  @memofrf6 ай бұрын

  Quality. Thank you.

• 
  @JayKTS6 ай бұрын

  Thank you 2 ;)

• 
  @favorite30246 ай бұрын

  How do you measure .84 (from 19.84) on the batten, like just 19 cm and 8 mm or :? Because if its just 19.8 in the end you need like 1.6 cm more

• 
  @JayKTS6 ай бұрын

  I just add 19,84 +19.84 +19.84 It’s best to do it with a calculator and you shouldn’t be moving your ruler or tape measure and write off what you calculate So you mark 19.84 , 39.68 , 59.52 , 79.36 , … , … ,as a accurate as possible and without moving the tape measure

• 
  @favorite30246 ай бұрын

  @@JayKTS so if my calculation is 23 for example, i should bring out the tape measure and mark on a batten 23 then 46, then 69 and so on:? But i still dont get it how to mark the small numbers like 23.02 for example, this is my number in my case. So 23.02+ 23.02.... = 23.02 - 46.04- 69.06 , how to mark .02/.04/.06 etc

• 
  @JayKTS6 ай бұрын

  @favorite3024 yes well the small numbers you mark it approximately like 23,02 you can mark 23 that’s not a problem .. it’s just because the way you mark it off it will be good . You can do this even on a 1/1000e what means 3 figures like .002 it doesn’t matter how many figures just just sum this number in your calculator and write it off approximately

• 
  @favorite30246 ай бұрын

  I got it now. Thank you so much bro, and thank you for the fast reply! :) @@JayKTS

• 
  @hebus19866 ай бұрын

  Nice work as allways, excellent craftmanship 👌 I wondered What ratio you use when making concrete for inside the form Greetings from" den andere kant vant water" 😏

• 
  @JayKTS6 ай бұрын

  Hallo Hebus :) We use the 1-2-3 rule 1 part cement , 2 sand and 3 parts granulate (grind ) Groetjes van aan den overkant 😁

• 
  @keilanodriscoll8227 ай бұрын

  do you just slowly let down the accrow props once its set rather than using shims on your brickwork? great video

• 
  @JayKTS7 ай бұрын

  Hello thanks man What do you mean with using shims ? I just take away the props when the mortar is hardened out ;)

• 
  @keilanodriscoll8227 ай бұрын

  @@JayKTS fair enough bro. Usually when I set up rough ringed arches etc I insert shims (wedges) that I slowly release after it’s built so was just wondering if you do anything similar

• 
  @danielserban94197 ай бұрын

  Where's the nnail

• 
  @JayKTS7 ай бұрын

  It’s right there 👀

• 
  @peppie6427 ай бұрын

  5:52 waar kan je zo een spanklemmen vinden?

• 
  @JayKTS7 ай бұрын

  Hebben jullie deze niet ? Deze vind je quasi overal in België

• 
  @peppie6427 ай бұрын

  @@JayKTS in de winkels zelf liggen ze niet in west vl , heb er wel online gevonden

• 
  @TC-rk9vu7 ай бұрын

  1UP ‼️

• 
  @JayKTS7 ай бұрын

  Let’s f shit up ;)

• 
  @user-wp2mp6ov7i7 ай бұрын

  Подскажите название фирмы ручного инструмента для кладки кирпича?!

• 
  @JayKTS7 ай бұрын

  Jung henkelmann

• 
  @stevemariner59807 ай бұрын

  Nice, you don’t see many 3 centered arches built these days

• 
  @JayKTS6 ай бұрын

  Cheers mate ;)

• 
  @mattcartwright82727 ай бұрын

  Great job Jay! - love watching the vids where you are restoring old buildings and bringing them back to life.

• 
  @JayKTS7 ай бұрын

  Matt thanks a lot brother 🍻

• 
  @reinierlelieveld49587 ай бұрын

  Klezorenverband is één van de mooiste metselverbanden die er zijn. Maar let wel op! Om de 7 lagen verspringen, hè. Als timmerman moet je ook dat weten

• 
  @lelonbond66828 ай бұрын

  i worked with bricklayere from germany and they said our way was easier and quicker we used american rose and marshaltown trowls.

• 
  @lelonbond66828 ай бұрын

  americans work off a mortor board we spread the wall we do not pick and dip.