Пікірлер

• 
  @yorookieh11969 күн бұрын

  lol i swear ppl were launching themselves off the deck on purpose 😂 woulda been a good run if u had some help...gg

• 
  @lostelectrons9 күн бұрын

  It also feels like once the healers see a Red Mage in the roster, they don't even bother trying to help rez unless the guy's been down for more than 20 seconds 😂

• 
  @yorookieh11969 күн бұрын

  i feel ur pain...as a long time rdm main i feel it all too well. n isnt it always during our burst too? sry bruh ur gonna hafta lay there a bit longer 😂

• 
  @xxjavier23xx62Ай бұрын

  What intake and tune do you have for the tiburon?

• 
  @lostelectronsАй бұрын

  It's a cheap non-brand eBay Cold Air Intake and factory tune.

• 
  @wholeycowsАй бұрын

  Did you have a check engine light before you cleaned it? Is that why you cleaned it? I gave a p0102 maf code. I'm wondering if this would fix it?

• 
  @lostelectronsАй бұрын

  Mine was fairly intermittent coming on with that code, depending on the outside temperature - if it was a hot day (something like +27°C or warmer), it would come on once my engine got up to running temperature and I was driving it a little harder than normal (because fun times). Otherwise I didn't really have an issue with check engine light. Never did see it come on with that specific code after I cleaned it.

• 
  @awang_ir2 ай бұрын

  It still seems challenging even at higher level like this....

• 
  @lostelectrons2 ай бұрын

  Super-bosses are challenging, for sure, especially when the game takes away half of your arsenal in battle (magic)

• 
  @awang_ir2 ай бұрын

  @@lostelectrons recently I did beat Lapis at level 49-50 with all 3 using luminous jewel / light talisman for increasing light element defence & defender chain for higher blocking rate (for Vahn - Noa - Gala) Vahn uses Mettle Goblet for always maxing its AP (Non stop miracle arts) Noa uses War God Icon for attacking twice in a row (Bash Ra-Seru / Left for multiplying damage after enhanced by Mt. Rikuroa's Genesis Tree) Gala uses Speed Chain for assuring the first turn (For designated Healing Berry user or Point Card at first turn and some points in battle) Good luck!

• 
  @dominicdaniel22424 ай бұрын

  🤷 *Promo SM*

• 
  @Bryan-sk1hq5 ай бұрын

  If i can play it again..really miss it

• 
  @raiden725 ай бұрын

  This game was my childhood

• 
  @liketiktok13056 ай бұрын

  pajako ndak tukang service kodoh, dari caro manyolder e se lah ketauan.

• 
  @potterteksmith75488 ай бұрын

  Played with these PC power supplies myself, well some years ago, and what I noted then was that the supplies used the 5V output to regulate for varying load which leads to some poor regulation if the 12V output is loaded and the 5V not loaded IE the 12V output will 'sag' as the load increases because it's not being 'seen' by the controller chip. If the 5V output is loaded and 12V unloaded then the 12V voltage will rise as the controller PWM adjusts to maintain the 5V target. I'm saying it does work but it's not precision by any means. I'd also add a cautionary note about handling the PCB without ensuring the primary side capacitors are fully discharged first - never rely on the design including discharge resistors or that they are actually functional even if they do exist!

• 
  @Legendflare8 ай бұрын

  bruh danton in the hero composition almost one shot me, he did 578 damage☠️,not sure why he didnt do his all out attack on you

• 
  @M.N910 ай бұрын

  I have P0171 code witches mean that the engine running to lean. I will try to clean the air flow sensor and hope that's help solve the problem. I will keep you updated 👍

• 
  @DeletedUser5734610 ай бұрын

  the sound is really distorted too

• 
  @lostelectrons10 ай бұрын

  Thank you for the feedback, but I am not sure what you mean by this. The boss has a distorted voice, if that is what you are talking about, but it is supposed to be distorted. The audio sounds normal to me when I watch it on my phone.

• 
  @DeletedUser5734610 ай бұрын

  @@lostelectrons there are some weird distorted echos around. 10:03 - 10:05 its pretty obvious

• 
  @DeletedUser5734610 ай бұрын

  whys the video so dark

• 
  @lostelectrons10 ай бұрын

  OBS compression

• 
  @mohamedmijmij693611 ай бұрын

  You saved me , thanks a lot

• 
  @AstekOst Жыл бұрын

  Hey nice video, did it make any difference?

• 
  @sibylbarrentine8623 Жыл бұрын

  👉 Promo>SM

• 
  @zapa1pnt Жыл бұрын

  I know this is three years old but, in case you haven't yet learned this, the hot lead of the power cord always, Always, ALWAYS goes, directly, to the switch First. Otherwise, the circuit will have power on it at all times. Very dangerous. That charger was incorrectly wired, from the factory. No matter what you are working on, power goes to the switch First. 😁✌🖖

• 
  @lostelectrons Жыл бұрын

  Thank you for pointing that out, however this specific battery charger doesn't actually turn on and off by the switch, it just switches between 2 amp trickle charge, 12 amp charge, and 75 amp boost (you can see that around the 12:50 mark in the video). So there is supposed to have power everywhere in there the second it is plugged into a power source. All the switch does is "turn on" other windings inside the transformer to step up the "power" by providing additional returns for the current to travel through. If you switch the hot in this case, you wouldn't get a smooth step-up transition, and it would be far more harmful to the transformer than just switching the neutrals. I do agree that there should have been an isolating switch on the hot before it got to the transformer, but that's not how this device was made, probably because it's not meant to be plugged into a power source for extended periods of time where an isolation switch would be needed, since it is just a home charger that might be used once a year then put back in storage.

• 
  @nedeljkooctenjak9690 Жыл бұрын

  for this you really need to be an intellectual,

• 
  @Wrathsack Жыл бұрын

  Great video to look at now that the game is finally on PS premium. Thank you boss.

• 
  @jayriecoboyijib6162 Жыл бұрын

  What model is that laptop ?

• 
  @lostelectrons Жыл бұрын

  it is a Dell Latitude 5580

• 
  @sergioramoneroles5807 Жыл бұрын

  Gracias por la exposición

• 
  @thekillerexe-ur3yy Жыл бұрын

  i was wondering if there is any way to tell how many watts a power supply would be making at 12 volt im trying to use it to power a car amp i got a 600 wat amp working fine i just dont wanna push it and blow the power supply or worse

• 
  @thekillerexe-ur3yy Жыл бұрын

  i know cutting them apart is not so highly looked at and alot of people will say not to do but how do i know how many amps its putting out do i need a multi meter if it helps its a old dell power supply its 405 watts i think

• 
  @lostelectrons Жыл бұрын

  @@thekillerexe-ur3yy if you can still see the sticker label, it should tell you under the DC Output rating what the Max Watts is. it should also tell you what kind of current (amps) it will do, both are limiting factors on what the power supply will do. if you want to do the math on it, or if it doesnt show the watts, you can calculate it by (Amps) X (Volts)

• 
  @millos71912 жыл бұрын

  👇 𝐩𝓻Ỗ𝓂Ø𝓈Ｍ

• 
  @ziadfawzi2 жыл бұрын

  Thank you

• 
  @embergaming42262 жыл бұрын

  supper helpfully video thank you so much!!!!

• 
  @yodelboy81682 жыл бұрын

  did not know the 2.7s came in 5 speed, here in the UK they are 6 speed

• 
  @edwardianroxas52332 жыл бұрын

  Sir what is the details of your intake please, I own exactly the same model.

• 
  @lostelectrons2 жыл бұрын

  To be totally honest, I got the cheapest Cold Air Intake I could find on Ebay that would fit my car 🤣 I think it was $85 shipped to my door

• 
  @avelinofrias1572 жыл бұрын

  Why did the power supply shuts off after 10 seconds of being on?

• 
  @lostelectrons2 жыл бұрын

  At the end? I turned it off by the switch

• 
  @tonydavey37412 жыл бұрын

  Why play awful music when you are trying to explain what you are doing, defiantly a thums down

• 
  @KCBhandy3 жыл бұрын

  Have you finished it yet?:

• 
  @dirkbonesteel3 жыл бұрын

  extra karma points for doing the custom intake right. putting the damn filter in the hot air stream makes it worse then OE system people. Cut it out, do it like this guy

• 
  @isaiahsolivas78683 жыл бұрын

  Hey you should probly disconnect the negative off you battery might burn out.

• 
  @lostelectrons3 жыл бұрын

  The MAF has a quick disconnect on it and the pins are recessed into the housing. Disconnecting the battery would be pointless for the short job this is.

• 
  @davidpolk1083 жыл бұрын

  What kind of tube or house are you using to bleed the clutch? The people at the auto stores look at me like I'm crazy... But no one has what I'm looking for.

• 
  @lostelectrons3 жыл бұрын

  I just had a chunk of 1/4" clear PVC tubing laying around. It doesn't matter what it's made of, as long as it's clear (so you can see the fluid coming out) and 1/4" diameter to fit snugly over the bleed nipple

• 
  @adamjam23 жыл бұрын

  So you just wiped off your speakers? Some description of the repair would be much appreciated. I’m having a very similar issue. Thanks

• 
  @lostelectrons3 жыл бұрын

  Basically, yea. I didn't want to just take a cloth to wipe off the speakers, incase I tore a hole in them, so I used a magnetized screwdriver to collect the metal fragments being pulled toward the speaker magnet

• 
  @jamieadams34043 жыл бұрын

  @@lostelectrons thanks!!! That was very helpful! I made sure to get all metal fragment carefully removed with a screwdriver and a soft toothbrush but it still sounds distorted on my left speaker. Might have to replace since I have already tried different sound settings and updating audio drivers. Thanks for your help though!

• 
  @92Pony3 жыл бұрын

  You made me so nervous with that uncapped bottle of fluid sitting on the battery with you reaching all around it, back and forth. I would have knocked that thing over, for sure!! LOL!

• 
  @JL-of3db3 жыл бұрын

  Just got a 2005 2.7 V6 and the clutch is just not engaging well, so this will really help, already got the parts, just waiting for warmer weather ;-)

• 
  @raulcabronero56493 жыл бұрын

  HI my friend i have a nightmare here. my car was in my garage a open garage about 3 months and i forget to cover the holes of the slave and the master cylinder. men i find a technician and put my new clutch and now the pedal.didnt want to go down entirely. i can't start the engine because the pedal didnt hit the switch its like very close by mm to the switch so the mechanic came and adjust the switch and start the engine the car its running didn't have shifting problem etc but its weird because the pedal didn't want to go down. i know this its not good and i didn't use the car after this. did you believed the slave or master was damage because was 3 months leave in my open garage without cover it? i order new ones and put my fe on this its not works i will sell it

• 
  @lostelectrons3 жыл бұрын

  I'm no automotive mechanic, and I am sort of having a hard time understanding the issue, but it sounds like you got a new clutch installed? There's that linkage that goes to the clutch fork inside that attaches to the Slave Cylinder, and that needs to be pushed backwards (towards the cab) until it has a noticeable "click" into position before attaching to the slave

• 
  @memory_maker_3 жыл бұрын

  Great work man

• 
  @hmotools45103 жыл бұрын

  My speakers sounds really low.. and makes horrible noises. Do you think I have the same problem ? They stopped working 3 months after I bought my laptop.

• 
  @lostelectrons3 жыл бұрын

  It's possible, but there's several other things that may be happening as well... 1. The speakers might be blown. 2. Their wiring connection to the motherboard might be damaged or loose. 3. Incorrect audio drivers were installed.

• 
  @hmotools45103 жыл бұрын

  @@lostelectrons I tried installing a lot of drivers, I reinstalled Windows. I have another workmate whit the same laptop and he has the same issue.

• 
  @lostelectrons3 жыл бұрын

  Try pulling your systems apart and physically inspecting the speakers and wiring harnesses for damages. Could have tears in the cones, crushed wires, misaligned pins, etc. If the computers were bought brand new, you should still have warranty on them after only 3 months.

• 
  @enocvelazquez-dw2ui6 ай бұрын

  Have problem. Speak. Me charlea. Compre nueva y sigue igual.

• 
  @haldanpedersen3 жыл бұрын

  Banshee bolt 😂😂 good work though

• 
  @Sheppards19844 жыл бұрын

  So I've noticed that you replaced the original master cylinder with a different one (41610-2C100 vs 41610-2C500) Was there any difference besides where the clutch fluid reservoir connects to the cylinder?

• 
  @lostelectrons4 жыл бұрын

  Zero difference in functionality or feel. It's a "genuine" Hyundai part, and the vast majority of Hyundai parts are interchangeable, just like Subaru. Some might just need some very small modifications to fit (rotating the reservoir hose 45 degrees, for example).

• 
  @Sheppards19844 жыл бұрын

  @@lostelectrons Yup, could've guessed.. Just makes me wonder why Hyundai keeps changing these parts for no reason... Different part numbers for tiburons between 2001-2003 and between 2004-2007 (only it's 5 times harder to find the one I specifically have originally of course). Thanks!

• 
  @lostelectrons4 жыл бұрын

  @@Sheppards1984 my guess would be different engineers, or trying to make multiple parts fit multiple different vehicles of that specific time frame. Try searching RockAuto.com for specific parts, they seem to have the vast majority available and also show you similar parts that will fit/work for your specific year/model

• 
  @Sheppards19844 жыл бұрын

  @@lostelectrons Makes sense. Though I'm from Hungary, so I'll have to make do with what I can find here :) (shipping from the US is not an option at the moment, as I need the part right away) but thanks anyway!

• 
  @danielmackenzie37444 жыл бұрын

  Thanks a lot

• 
  @eugenepierce73534 жыл бұрын

  After you shifted gears would your car do a wined up before replacing them two parts?

• 
  @lostelectrons4 жыл бұрын

  Not really. Was more just hard to get into and out of gear, like the clutch wasn't fully disengaged when the pedal was pressed in. More an issue when trying to go into gear. Reverse was very hard to get into

• 
  @carloseuceda98844 жыл бұрын

  Can you reuse the cotter pins?

• 
  @lostelectrons4 жыл бұрын

  Absolutely you can. Do a quick visual inspection on them to check for major wear (like one side worn down flat) before reinstalling, but other than that, they are totally reusable.

• 
  @savethegamer94154 жыл бұрын

  So what these monsters drop more gold and rare items? I really don’t run into these guys at all lol Don’t take the time

• 
  @lostelectrons4 жыл бұрын

  Sorry for the late reply! But yes, the unique monsters will drop very high amounts of EXP, or Gold, or some super rare items. Each unique monster has specific things it will drop, and some are very hard to come by, and even harder to kill.

• 
  @savethegamer94154 жыл бұрын

  Lost Electrons will definitely have to grind these areas out my next playthrough..

• 
  @lostelectrons4 жыл бұрын

  @@savethegamer9415 If you feel really ambitious and/or bored, 00PARTS is great for grinding up money super early, and you can outfit your whole team in Lohan with Legend Casques (10,000g each), Ultimate Wargods (10,000g each), and Phantom Shields (10,000g each) as soon as that area opens up on disc one. I noticed 00PARTS spawned a little more than 50% of the time in that area, so 90,000G should only take about 27 hours of solid grinding to accomplish 👍 then you'll be laughing all the way through to end boss with your OP team

• 
  @savethegamer94154 жыл бұрын

  Lost Electrons will definitely reference this video again.. I do like to max out additions and can even level up all my characters lol.. one of my favorite games

• 
  @lostelectrons4 жыл бұрын

  @@savethegamer9415 Feel free to use all my gameplay videos as references in future playthroughs! I don't go into the shops or menus in the videos, but I do have all the chest locations and Stardust locations, as well as the end-game hidden secrets, like Faust, Dragoon Towers, etc. And feel free to share with your friends or anyone else you know who is playing this game!

• 
  @raulcabronero56494 жыл бұрын

  hi .. men i lost rhe freaking plastic washer goes when you pit the clip. can you have idea what i can do or if this part has a part number for find it and order kt?

• 
  @lostelectrons4 жыл бұрын

  If it's the washer from the pedal connection, you can just use a metal washer of a similar size, but be sure to put some lubricant (like silver anti-seize) between the metal plastic parts

• 
  @raulcabronero56494 жыл бұрын

  @@lostelectrons thanks for reply.. asking you something today i open my new master cylinder but when i compare the where its start the thread at the new one its like a much upper than the genuines ones.. and im sure order the replacement from luke by the book i have 5 speed 2003 2.7 part number LMC379. i remember change this cylinder before in the past clutch change but i only order part and tech do the job so the genuine i order before and was i pull from the car now its not the came in the car but i order it when i do it with VIN number so i believes its the correct ones to. .. its like the thread screw its more larger compare to the hyundai genuine its normal?

• 
  @lostelectrons4 жыл бұрын

  @@raulcabronero5649 ​ If you're talking about the length of the threaded adjustment rod, you can make it longer or shorter by loosening the locking nut and spinning it in and out. If you mean that the diameter is larger, it shouldn't really matter as long as it can pass through the firewall and connect to the pedal properly. If you bought the whole mater cylinder, you shouldn't have to swap parts, should just be a direct drop-in replacement.

• 
  @slgamingpark14894 жыл бұрын

  sri lanaka ela kollo

• 
  @NickKoll4 жыл бұрын

  Amazing work buddy. Thanks

• 
  @epicraptorman4 жыл бұрын

  Mine went out and needed replacing. Shops wanted $315 just for labor to do it. Nah. That doesn't include the towing fee either.

• 
  @ibhienkeliat4 жыл бұрын

  Great tutorial. Good work.