This kit is useless " it doesn't help the ease of steering at all . Just another scam . What does work well are the needle bearings installed on the front spindles. JMO
@Georgiagreen3173 жыл бұрын
Done several of these and I really can't say I've ever seen a real difference from before and after.
@michaelcee83484 жыл бұрын
?
@marksalamack61335 жыл бұрын
OK...so installed this only to find out it does NOTHING...only 20 bucks...but don't waste your money
@sheldonport42183 жыл бұрын
You can get a thrust bearing and thrust washers from Grainger, or Amazon for a lot less.
@marksalamack61335 жыл бұрын
Good video...but....they are not packed with grease...you must grease it yourself..it is even mentioned in the instructions that it is necessary
@galleryfifty45 жыл бұрын
This kit is awesome check Corbeau-Customs eBay very reasonable price free shipping,
@PhatboyHD887 жыл бұрын
Are you sure these kits will fit on a john deere 317 ? I went to buy one of these kits on kirk engines site they were marked for cub cadet , so i sent him a email and he answered the it would not because the stud size on the JD was larger than the cub so it wouldn't work,, i would like to purchase a kit like this of it would fit my 317..
@galleryfifty45 жыл бұрын
Check out Corbeau-Customs he has a kit for the JD tractors 317 and many others
@jhitt798 жыл бұрын
So how about a video demonstrating the before and after difference.
@300dude28 жыл бұрын
Why anyone would buy this kit is beyond me. You can buy the needed parts for less than $10 and do it yourself.
@galleryfifty47 жыл бұрын
they buy it because it a simple fix and it works
@galleryfifty45 жыл бұрын
For the same reason you bought one because it works awesome, And the instruction are very detailed.
@stephenbarkley78689 жыл бұрын
The one I purchased did not have a thrust bearing. It had a radial bearing, which does nothing at all.
@galleryfifty47 жыл бұрын
This guy is a lier he never bought anything found that he been selling the same kit.
@jimemo479110 жыл бұрын
The kit work by removing the friction between the linkage and the column.
@augiescafidi269710 жыл бұрын
I get that it makes steering easier but will it help to remove the excessive play in the steering?
@jimemo479110 жыл бұрын
Sorry for the slow response to answer your question no it will not remove the play.
@augiescafidi269710 жыл бұрын
Thank you.
@sheldonport42183 жыл бұрын
@@augiescafidi2697 You take out the excessive play with the large adjustment cap in the bottom of the steering box. Remove the cotter pin and tighten it down the whole way using a large regular screwdriver, rotating the steering shaft back and forth as you do. Then you'll want to back the cap off just enough until the steering shaft rotates freely with no binding,. Replace the cotter pin, you have to back the cap up a little to get the cotter pin to align correctly, and you're done..
@TractorPrepper10 жыл бұрын
It's supposed to be "The next best thing to power steering"
@galleryfifty47 жыл бұрын
and it works
@galleryfifty45 жыл бұрын
I couldn't believe how well it worked
@clecub336011 жыл бұрын
Also wondering how it works?
@raccoon6817 жыл бұрын
removing the friction between the linkage and the column i hope this helps 3 years later
Пікірлер
This kit is useless " it doesn't help the ease of steering at all . Just another scam . What does work well are the needle bearings installed on the front spindles. JMO
Done several of these and I really can't say I've ever seen a real difference from before and after.
?
OK...so installed this only to find out it does NOTHING...only 20 bucks...but don't waste your money
You can get a thrust bearing and thrust washers from Grainger, or Amazon for a lot less.
Good video...but....they are not packed with grease...you must grease it yourself..it is even mentioned in the instructions that it is necessary
This kit is awesome check Corbeau-Customs eBay very reasonable price free shipping,
Are you sure these kits will fit on a john deere 317 ? I went to buy one of these kits on kirk engines site they were marked for cub cadet , so i sent him a email and he answered the it would not because the stud size on the JD was larger than the cub so it wouldn't work,, i would like to purchase a kit like this of it would fit my 317..
Check out Corbeau-Customs he has a kit for the JD tractors 317 and many others
So how about a video demonstrating the before and after difference.
Why anyone would buy this kit is beyond me. You can buy the needed parts for less than $10 and do it yourself.
they buy it because it a simple fix and it works
For the same reason you bought one because it works awesome, And the instruction are very detailed.
The one I purchased did not have a thrust bearing. It had a radial bearing, which does nothing at all.
This guy is a lier he never bought anything found that he been selling the same kit.
The kit work by removing the friction between the linkage and the column.
I get that it makes steering easier but will it help to remove the excessive play in the steering?
Sorry for the slow response to answer your question no it will not remove the play.
Thank you.
@@augiescafidi2697 You take out the excessive play with the large adjustment cap in the bottom of the steering box. Remove the cotter pin and tighten it down the whole way using a large regular screwdriver, rotating the steering shaft back and forth as you do. Then you'll want to back the cap off just enough until the steering shaft rotates freely with no binding,. Replace the cotter pin, you have to back the cap up a little to get the cotter pin to align correctly, and you're done..
It's supposed to be "The next best thing to power steering"
and it works
I couldn't believe how well it worked
Also wondering how it works?
removing the friction between the linkage and the column i hope this helps 3 years later