Пікірлер

• 
  @starsandnightvision2 ай бұрын

  Great video. It sees plenty of stars but the motion blur on this camera is pretty bad.

• 
  @shivercanada2 ай бұрын

  Yes there’s a trade off but I’m sure future models will fix this problem and it has firmware so it could be updated and improved in the near future. I got it at a great price on Indegogo so it’s good enough for now for me.

• 
  @Iroc_twan2 ай бұрын

  I just got mine Friday

• 
  @shivercanada2 ай бұрын

  Awesome hope you enjoy it!! 🎉

• 
  @frenchcreekvalley3 ай бұрын

  why would you "give it a little break"? You are simply oxidizing the aluminum more.

• 
  @shivercanada3 ай бұрын

  Because this was the first test, the first unit I had blew up after so many minutes of use

• 
  @frenchcreekvalley3 ай бұрын

  @@shivercanada did you discover why it "blew up"?

• 
  @PescatoreFocoso4 ай бұрын

  you can set the max temp reach this system? the problem of this system go up since you stop so you overheat the material and risk

• 
  @shivercanada4 ай бұрын

  It does have a limit at least, I tried melting High Carbon Steel and it doesn't seem to get that hot, or it takes too long not sure which. This was a relatively inexpensive kit with drawbacks, like as I stated here, can't be run indefinitely without burning out something, ie. not a " 100% load " system. Thanks for stopping by!

• 
  @AlejandroFernandezDaCosta4 ай бұрын

  And lift off....

• 
  @user-lg6ge8ts4e4 ай бұрын

  The o ly problem with all SCT Telescope is mirror flope and image shift. No thanks I'll stay with my orion 8 Newtonian Reflector Telescope it will blows away any SCT scopes

• 
  @shivercanada4 ай бұрын

  Good Choice, I'm thinking of getting a RASA for widefeild in the future. Mine has no mirror flop but it's good for Planetary, and maximum zoom for the moon. Biggest problem with SCT's is they're F10 which . I use a Focal Reducer so it's F6.3 but still high.

• 
  @TheFutureisTheFuture4 ай бұрын

  can the copper tubing be extended so its not so close to the electronics?

• 
  @shivercanada4 ай бұрын

  Yes I did that with another tube I made very slightly smaller. It doesn’t affect the electronics because of that giant fan which blows a lot of air and cools well. Making a tube too small will blow the unit as the seller explained. This is why the zero load type heaters are superior.

• 
  @marcusv.4435 ай бұрын

  There is something draining your efficiency. 4kw should melt that amount of aluminum faster, idk

• 
  @shivercanada5 ай бұрын

  Yeah it's from Aliexpress, Chinese made so it's likely not even 4000W, but that's what the kit is listed as so didn't want to confuse anyone incase they wanted the same kit.

• 
  @emfizz12 ай бұрын

  From the looks of the power supply he is using it's probably capable of less than 1000W. To get close to 4kW you're going to need to supply more than 80A at 48V.

• 
  @DimaProk4 күн бұрын

  I think the fan cooling board is hindering the heat up of the crucible.

• 
  @shivercanada6 ай бұрын

  My pleasure sorry it was so shaky and rough. The Seemor seems way better for color brightness in darkness but the NS200 is natural and crisp. Using the IR light is really good and clear even in total darkness. Peace!

• 
  @adog5136 ай бұрын

  Thank you so much! This makes me feel good about my order I currently have for one on Amazon. Think I might grab the akaso as well just to compare the 2 units. But for the price it's seems to be just what I was expecting. Thank you again for taking your time to film this on my request. Really appreciate that 🙏

• 
  @adog5136 ай бұрын

  Can you do another video with a demonstration of the color feature? I'm interested. I just wonder if I should cough up the extra money for the akaso seemor

• 
  @shivercanada6 ай бұрын

  Hey Cody, thank you for stopping by! I’ll do that in the next couple days. Don’t think it’s as good as the upcoming Seemore because of the AI. if there is a bit of light the NS200 can look pretty good though. I would do it right now, but it’s extremely foggy here so it wouldn’t really work but I’ll upload that soon.

• 
  @adog5136 ай бұрын

  @shivercanada thank you so much for your response! Yeah I was thinking the seemor would ultimately end up being the better device. But for the price and availability factor this one doesn't seem like a bad option

• 
  @willmcpherson80976 ай бұрын

  A bit of a funny thing about this monument that we always joke about is, when you see it from the ground, it looks like General Brock is flipping off the States, since the sword isn't there.

• 
  @shivercanada6 ай бұрын

  I never noticed that!! That’s hilarious 😂

• 
  @robertmethia70807 ай бұрын

  just got an ls8 cant wait

• 
  @shivercanada7 ай бұрын

  Congratulations! 🎉

• 
  @hoytzone7 ай бұрын

  I like how you take me on this journey in your video , I get totally : immersed

• 
  @shivercanada7 ай бұрын

  Thanks Hoyt! How are things going?

• 
  @hoytzone7 ай бұрын

  Wow, you took me on a journey I didn't want to come back from--------- very nice shiv

• 
  @shivercanada7 ай бұрын

  Thanks again man appreciate it

• 
  @HerrConsolero8 ай бұрын

  Jesus! NICE! :D

• 
  @shivercanada8 ай бұрын

  Thanks man I appreciate your kind words! still have to replace the entire Cyclotron. Just printed and installed exact replicas of the Shock Mount and a Clippard Valve that is actually OPENED, not closed like in this model. :P

• 
  @hbkryme8 ай бұрын

  Absolutely phenomenal upgrade! Two questions I gotta ask, since I myself own the Hasbro Pack and the Spengler wand: How'd you get the sound to come from the wand and broadcast through pack, and how'd you upgrade your hose?? Your pack is a true work of art. Cheers!

• 
  @shivercanada8 ай бұрын

  Hey thank you but Spirit and Haslab did most of the work! I'm still not finished, I've since upgraded 3 more things and waiting for a couple parts. It's an obsession of love. :D I opened the Wand with the 4 screws on the back side ( had to drill out the plastic, but you can see where the bolts are where there is smooth plastic circles ) then the speaker/Heatsink pulls out easy so you can solder 2 wires to it. Then drilled a hole on an angle ( inside right under the handle area ) toward the handle, ran 2 small wires through and into the pack with the amp and speaker or easier yet a 15W bluetooth speaker with Aux input. Still lots of room for the battery. Had to drill a hole into the Spengler wand end hose attachment, then Epoxy the 2 halves together so I can screw in the loom holder and have wires going through it.I bought 3/4 split loom roll from Amazon for about $25 CDN for enough to make 3 or 4 of them. It hangs nicely, fits the Spengler attachments and doesn't kink like the one it came with, I did the opposite with the Power Button for the Spirit pack, ran 2 wires into the wand to the closest switch for the lights on the pack. I kept the slo bro button and wiring and will attach the wires to the slo bro button on the Wand some other time because you have to remove a lot of stuff to get in there. To cover the speaker holes on the pack I used the same putty epoxy pressed into the holes until flush then sanded. There are lots of free files on Thingiverse for upgrades if you have a 3D printer. I used some and made a couple of my own. Any other questions I can help with or clarify, I'll be glad to!

• 
  @drchan58939 ай бұрын

  I have a 2000w Heater and i used it a few times to heat 8mm steal rods, I bent the ends to a hook shape for a project and now the problem i have is the circute breakers keep switching the power off. Can anyone help with this issue. evertime i place a steal rod in the coil it cut-out. I have a 3000w 55A power supply it works good no issues there, the heater has always kept cool never over-heated.

• 
  @waschbaers_werkstatt5 ай бұрын

  don't place too much steel in or near the coil, you will get an overload, the load depends on how much steel is in the coil, get further away, take your time or less steel.

• 
  @ProfSimonHolland9 ай бұрын

  excellent

• 
  @shivercanada9 ай бұрын

  Thank you professor!

• 
  @lorenzoleone89839 ай бұрын

  good job!

• 
  @shivercanada9 ай бұрын

  Thank you so much Lorenzo, and thanks for stopping by!

• 
  @lorenzoleone89839 ай бұрын

  @@shivercanada There is a lot of creativity in you

• 
  @lorenzoleone89839 ай бұрын

  Fantastic

• 
  @shivercanada9 ай бұрын

  Thank you again. 😊

• 
  @clintonshepherd706810 ай бұрын

  Precious child. Thank you for saving them.

• 
  @shivercanada10 ай бұрын

  It’s an honor and a joy! ☺️

• 
  @DanielLopez-kz6up10 ай бұрын

  BIIIIRD?!!

• 
  @shivercanada10 ай бұрын

  Crow! 🐦

• 
  @clairebashirian10 ай бұрын

  Promo'SM ☝️

• 
  @ajingar11 ай бұрын

  Hi there, thanks for the very useful video. I have one question. I have the Meade LX90, but that is on it's usual Alt-Az mount. Will the Asiair connect to this mount? Or does it need to be an equatorial mount? Thanks in advance.

• 
  @shivercanada11 ай бұрын

  Hey, I’ve seen LX90 as a setting and you need Audiostar or Autostsr handbox but contact ZWO to be 100% sure. Asiair is fantastic all around and they even added an all star align feature if you don’t have view of the north area and my tracking was actually better than a polar align.

• 
  @steveholding397511 ай бұрын

  Hello. I know you said this can't be run continuously, but it's quite an impressive performance while it is running :) Even if this is the 70ml crucible, although the bar suggests it is a bit bigger than that, the 13m melt from cold is pretty good. I guess the rebar doesn't get so hot because its relatively small diametre compared to the crucible means it doesn't couple too well. For fine tuning, I wonder about a bit more insulation between ceramic crucible and coil to reduce heat flow into the water cooling.

• 
  @shivercanada11 ай бұрын

  It’s always better to have more insulation and should work better but I don’t have a blanket to test it. It took over an hour with propane and usually under 15 minutes with this unit so it’s worth it

• 
  @Izaya_Orihara Жыл бұрын

  I remember getting one of these for free when I got the Roomba 562

• 
  @baqi1 Жыл бұрын

  Can you connect a DC Power supply to the Power Board module, a lot of instruction manuals says yes, if so any specific model and what type, and how do i connect it?

• 
  @shivercanada Жыл бұрын

  I’m sorry I can’t answer that, this was a Kit from AliExpress, I didn’t design it myself.

• 
  @primitiveslow-mo8714 Жыл бұрын

  the microscope is on sale. i need to do more research as a hobby microscope. thanks for the video. its the first one that comes up in search

• 
  @shivercanada Жыл бұрын

  Hey, check one of my other videos right after this one I took the scope back and bought another one that was more but way way better quality images. I’m glad I spent the extra money because it’s something you’re gonna have for a long time.

• 
  @MrtTrex1976 Жыл бұрын

  Somethings not exactly right here with this with that much power you should me liquifying that aluminum in 8 minutes max

• 
  @shivercanada Жыл бұрын

  Yes well I got it from China on AliExpress and most of the time the specs are exaggerated on electronics. At least it mostly works well thankfully!

• 
  @MrtTrex1976 Жыл бұрын

  I think your zvs would be way more efficient and faster if you get a little thicker crucible

• 
  @shivercanada Жыл бұрын

  I may need one soon so I’ll try a thicker one thank you for the tip!

• 
  @Mukulol Жыл бұрын

  Waht is the power supply aré you using

• 
  @shivercanada Жыл бұрын

  If memory serves me 50A Communication power supplies but the amperage could be wrong. Check AliExpress for “4000w induction heater” those kits are the power supplies I used. Thanks for stopping by! ✌🏻

• 
  @heryerfansah5914 Жыл бұрын

  Berapa kva kapasitas mesin ini

• 
  @DarkNight-ju3cd Жыл бұрын

  yooo that's absolutely amazing 🤩

• 
  @shivercanada Жыл бұрын

  Thank you! my equipment is better now but haven’t filmed the moon yet.will do it soon though! ✌🏻

• 
  @donnelllucas78gmail Жыл бұрын

  I was there in 2009, and 2010 watching the sky multiple times during the day, and night. I've seen this thing in this video, or what seems to be this same thing in this video and it had another one with it. Looked like they were playing tag. I saw ufos in Niagara Falls 100's of times before I left mid 2010. Incredible experience, but freaky to see all the time not knowing what they are. This type far in the sky, also the one above the casino lights that was closer to the ground, but I've also seen things flying just above the homes, and buildings in Niagara Falls. If you weren't looking for them, you'd never see them. You must adjust your eyes... same for the one in this video, with the naked eye you really have to stare before you see these things most times. If not, and you're not looking for it, most people just quickly look up, and right back down again.. they miss it every time. I even pointed this out to people in person, and alot of them would just refuse to see what's right in front of them. I've seen a fleet of them moving in the same direction in the day time sky when I was at a barbecue with people who thought I was crazy until they all saw it. MIB was also approaching people during this time. Trust me when I tell you.

• 
  @shivercanada Жыл бұрын

  I can attest also it seems that EVERY time I went down to the falls close to the water I would see something not explainable in the sky.

• 
  @donnelllucas78gmail Жыл бұрын

  I'd be happy to compare notes with anyone about this event. I saw it many many times, and I was approached by the MIB. I didn't realize how many others were. Crazy stuff.

• 
  @shivercanada Жыл бұрын

  I was following this almost nightly, literally hundreds of hours of wasted time, more than anyone trying to capture evidence of it maybe doing something odd and no MIB approached me. I'd love to hear what happened to you with these people, please comment if you can it's very valuable....this stuff gets lost in time and shouldn't. The 2 times it did do something I wasn't recording. Once I had a witness that told me it was turning and I watched all the lights rotate then stop, fumbled for my camera and it stopped literally a second before I hit record. Luckily though, I compared the STARS in the background to prove that all the lights turned. I outsmarted whoever they are but it's not comparable to actually having it recorded. All the same conditions exist as well as weather wise, but NO LIGHTS anymore

• 
  @casper2yall Жыл бұрын

  How did you take these pictures using this telescope ? And how did you record a video with this.. I just received mine and have no idea how to use it

• 
  @shivercanada Жыл бұрын

  Hey Casper! I connected a Canon dslr to the eyepiece holder using no eyepieces. I 3d printed a connector but you can buy them at telescope stores. You can get a cellphone connector as well or buy an Astronomy camera that connects either to the back of the scope or using an eyepiece holder. Call a local telescope store and tell them what camera you have and what you need to connect it to the scope.

• 
  @casper2yall Жыл бұрын

  @@shivercanada Ok thank you so much for getting back to me on this, I really appreciate it..

• 
  @fatmanjstyle5306 Жыл бұрын

  Seems similar to the sapphire Las Vegas lights seen a few weeks ago. But that was actually debunked, turned out to be the building lights below. Could be the same case here.

• 
  @shivercanada Жыл бұрын

  I saw that video. only problem is the devil is in the details. In 1990 the same thing happened in Montreal and hundreds of people witnessed it including police officers. They all saw it moving around the town from building to building. light pillars or ice crystals in the atmosphere can’t do that under any conditions. I saw the lights in the falls turn very slowly and then stop but I wasn’t recording at the time. I did, however prove the lights rotated by comparing a minutes before a video comparing the STARS. Some people at the casino also saw it all the lights turn as well. I originally thought it was ice in the atmosphere or ions from the Falls being lazed by the light on the ground, the bubble of ions acting like a chamber of gas in a gas laser. My experience and the Montreal 1990 sighting don’t match the explanation. Keep in mind a lot of people debunk things and they don’t know the details I’ve heard the stupidest explanations for sightings that don’t even match what was observed. I’d have to see the debunk. When people believe in the bunk that doesn’t match the evidence they are just as naïve as people who believe that everything is a UFO. I’m still undecided on the Falls lights. PS if it was atmosphere why did it disappear when nothing is changed. We have the same weather and the same lights, yet no sky phenomenon.

• 
  @donnelllucas78gmail Жыл бұрын

  Fatman, don't believe that debunked bs. Its always people with no experience who are debunking or fact checking things they know nothing about, nor can they understand. They Vegas video looks identical to the video in Niagara. There use to be like 40 videos of this craft by different people.... they are all impossible to find. I whitenessed this this thing many many times in person including the first night it appeared in October 2009. We get no prize to lie. We have already heard all the laughs. Tough skin.

• 
  @casper2yall Жыл бұрын

  How did you record the video?

• 
  @shivercanada Жыл бұрын

  Hello! I connected my Canon camera to the back of the telescope using a 3d printed connector for the camera. I use an LX85 with Astro cam now

• 
  @casper2yall Жыл бұрын

  @@shivercanada wow that’s awesome.. I’m having a hard time finding a mount for my camera as it’s discontinued.. Thank you for getting back to me..

• 
  @shengxianghuang1713 Жыл бұрын

  hey, I followed your updates on asiair with equatorial telescope things, I’m also trying asiair plus with my Meade lx85 and it brings me wrong declination and cannot use the tracing or returning, I chat with zwo staffs and they replied asiair didn’t support LX85 since this meade gear is too old, and they also mentioned if there is something like the instructions set or “goto” instructions witch more like a protocol for asiair to decode if I didn’t got it wrong. I just wanna seeking your help for the issues above and is it possible to get such instructions set from Meade?😂

• 
  @ashwynn4177 Жыл бұрын

  It would help if you mentioned the weight you melted

• 
  @shivercanada Жыл бұрын

  Hey sorry Ash I didn't do that, but I filled the Crucible as much as I could as a very rough estimate. Crucible is 290ml

• 
  @martinrodgers6114 Жыл бұрын

  Just bought one of these (plus the rapid charger under 100 dollars). This is so I can charge three batteries at the same time.

• 
  @shivercanada Жыл бұрын

  Nice congrats! I had 3 chargers from my other 80v products and they work well on the snow blowers 4ah 80v batteries

• 
  @MrPhatties Жыл бұрын

  You can get an extra 80v charger for cheap since people usually have extras if they own multiple tools

• 
  @shivercanada Жыл бұрын

  I returned the 60v and got an 80v. I have 3 chargers and 4 lower amperage batteries already. Those chargers for the mowers etc do work on the higher amperage batteries I already tried one and it charged perfectly. ✌🏻

• 
  @martinafan64 Жыл бұрын

  Are the green push down handles made of plastic? If so, any concern that they might break/snap when being pushed down? I'd like to replace my 2-stage gas powered Ariens snowblower with this, but seems like there's a lot of plastic handles and controls.

• 
  @shivercanada Жыл бұрын

  Hey that’s a great question, yes the green parts are plastic on the controls and the tightening knobs but are not thin or flimsy they’re very thick material. The body is mostly metal though except for the battery compartment lid and the chute control cover. it’s very heavy, about the same as a gas one I compared it to.

• 
  @martinafan64 Жыл бұрын

  @@shivercanada Thanks for the reply & info. I own Greenworks & Toro 60V equipment, so right now it's a toss-up between this 2-stage Greenworks and the 2-stage 60V Toro Power Max. Both have similar ratings & reviews, but I'm leaning more towards the Toro because I like my 60V single-stage Toro snowblower a lot more than my 60V single-stage Greenworks. I do have more Greenworks 60V batteries than Toro 60V batteries though, so I'd definitely have more runtime with the GW compared to the Toro. I might have to flip a coin to decide lol.

• 
  @tomdibble8983 Жыл бұрын

  Glad to see this beast in action finally! I ordered mine (well twice; once from Tractor Supply Co, with $200 shipping, then once it was on GreenWorks' site with free shipping I canceled that and ordered from GreenWorks directly) a few weeks back and it has been sitting waiting for the snow to come since last week. Seems like it has the best features of the competition (Ego and Toro being the only real contenders here) with the exception of Toro's no-shear-pins connection (which may or may not be a good thing) and Toro's hand warmers, and GreenWorks' general high quality (I've got a lot of GW equipment and only one that was poorly designed IMHO). Long story short: I'm waiting for some snowy action here in PA, and it just isn't in the forecast, so glad to see some confirmation that this beast in my garage isn't likely to be a dud!

• 
  @shivercanada Жыл бұрын

  I do believe 15 to 20 cm is coming your way on Thursday December 15th, I talked it over with Santa Clause. 👌🏻😂 Enjoy!

• 
  @jrfrailey Жыл бұрын

  Who assembled yours. I bought mine at Tractor Supply and they assembled it. The handle that rotates the cute was pointing down like yours. It is supposed to point up. Not a big deal I flipped it easily. Now the cute moves the way the handle moves. And much easier to use.

• 
  @shivercanada Жыл бұрын

  Hey John, I noticed that right away but I left it because I returned it for the 80V version which I had to get at the Greenworks website as Canadian Tire can’t order the 80v version sadly. It was assembled by Canadian Tire.

• 
  @ispy1009 Жыл бұрын

  I feel like a dope. I got mine two weeks ago, and I can't figure out how to connect the shute.

• 
  @ispy1009 Жыл бұрын

  Instructions say to make sure the shute is facing straight ahead, but I can't move it from its locked position facing 90 degrees right. Can someone who has one please help by doing an assembly video? Thank you.

• 
  @shivercanada Жыл бұрын

  @@ispy1009 hey Jeffrey I’m sure you assembled it right but to turn it you have to pull the handle BACK toward you first before turning. I had the same problem and out of frustration I pulled on it and it loosened and turned.

• 
  @tomdibble8983 Жыл бұрын

  The chute goes on the square shaft until you can put the bolt through (there is no "click" as the manual says). The chute is pointing right, so shine a light inside and you'll see the slot is mostly horizontal, angled slightly up at the right. Put the directional shaft in to match with the handle facing mostly-right, then attach the cable so you can pull the chute release and turn the handle straight up and it should be facing forwards. Definitely a 1.0 manual!

• 
  @tomdibble8983 Жыл бұрын

  @@shivercanada Yes. The chute action has a push/pull lock (springs push it to "locked" unless you pull the attached cable), then swing direction control (release the control and the spring pulls it back to locked). A significant improvement on "the competition's" (Ego) chute control IMHO.

• 
  @lloydosten8195 Жыл бұрын

  I did see a video that explains how to do it.

• 
  @nk41keys Жыл бұрын

  Nice machine. I recently purchased a 40-volt Greenworks for my deck. It works great! I have a gas powered Ariens to do the heavy work in my very large driveway and that works great also. I've been blowing snow for over 30 years, and I must say I'm impressed with the battery powered blowers that are on the market today! One little tip, if you slow down you won't wind up pushing a mound of snow and everything will operate a lot cleaner.

• 
  @derlar777 Жыл бұрын

  Great video ! I just purchased the same unit but mine is the 80v version and get it next week. Overkill for me as the single stage Honda worked well for me for many years but when the street gets plowed it can't handle the snow drift at the end of the driveway, so this new unit should handle that with ease. I even got the 80v 12" shovel for the smaller areas to make this all easier. I hope anyways...

• 
  @shivercanada Жыл бұрын

  I’m contacting Greenworks tomorrow about that I’m quite miffed because I have four 80 V batteries and 3 chargers and there wasn’t a version with 80 V batteries at Canadian tire. 😩 I sure hope Greenworks will swap it for me. This battery one easily handles the ice at the end of the driveway like a Gas one you’ll love it!

• 
  @ronaldr.236 Жыл бұрын

  Thank you very much for creating content for this product. I received mine a week ago and just tested, to make sure, that my batteries are compatible (from a 1 stage blower) and that the motor works. I am just about an hour north of NYC but we get more snow than them and I can’t wait for my first use.

• 
  @shivercanada Жыл бұрын

  I’m excited for you! I can’t wait to use mine again also 😌