Cisco is the worldwide leader in IT that helps companies seize the opportunities of tomorrow by proving that amazing things can happen when you connect the previously unconnected. We're Ready. Are You?
Great video Many people have the same request, please make video without background music
@timrecruit66989 сағат бұрын
lol
@NazriBuang-w9v13 сағат бұрын
Lies again? Love Spunk USD SGD
@NazriBuang-w9v13 сағат бұрын
Lies again? AIA Money USD SGD
@user-kd1fr1bw5g18 сағат бұрын
For the C1300-24XS model, Can it use the 4x10GBase-T RJ45 share combo ports as stacking ports?
@CiscoSystems11 сағат бұрын
Hi there, thanks for your question! The C1300-24XS model, typically has specific ports designated for stacking. However, whether the 4x10GBase-T RJ45 share combo ports can be used as stacking ports depends on the specific design and firmware capabilities of the switch. In many network switches, stacking ports are usually specialized and may not be interchangeable with regular Ethernet ports. The 4x10GBase-T RJ45 share combo ports are generally intended for high-speed network connections rather than stacking. To get a definitive answer, you should refer to the official documentation or user manual for the C1300-24XS model. Alternatively, you can contact the manufacturer's technical support for detailed information on the capabilities and configuration options of the switch. We hope this information helps!
@serverlabuk20 сағат бұрын
Great video keep them making and uploading. 1. @ 1:13 you say "in the diagram here ....... " but there is no diagram slide. 2. Without background music would be great as listening to you would be easier as I find the music interfering. If you playback with and without music you might see the diffrence.
@cuongduong9843Күн бұрын
hi, can I see the speed of lag after config?
@cuongnguyenquoc62292 күн бұрын
In the video, both active and standby switch. The first command the same “stack unit 1”. So if you add third switch member, the command is always “stack unit 1”
@omyadav18663 күн бұрын
Cisco systems incorporated data customer service device name Cisco certified networking public Cisco support help
@omyadav18663 күн бұрын
Support Cisco certified network associate member since A A
@warpdag3 күн бұрын
Look who’s selling out, yet again
@hvince673 күн бұрын
Arista is so much better than Cisco for doing this type of Vide deployment.
@mistermagnifico3 күн бұрын
Loud music and Doorbells...
@EdwinRiveraTheOneThatGotAway3 күн бұрын
No thanks(*_*)
@vivarock123 күн бұрын
Does it apply for fxos 4100 and 9300 series too?
@CiscoSystems20 сағат бұрын
Regenerating the default key ring certificate is a common task in network security appliances, like Cisco's Firepower eXtensible Operating System (FXOS). The FXOS 4100 series and Firepower 9300 series have a similar process, but there might be some variations in the interface and commands. We hope this info helps.
@sid50604 күн бұрын
Okay cisco I seen that you changed the name to only 1300s now. Will dhcp server come to 1200s I bought a 1200 bc on this video saying it had dhcp server
@NaimFeroudj4 күн бұрын
Intéressed de here stages cisco réseaux
@muhammadfayiz32434 күн бұрын
💯💯💯
@juuustpeachy5 күн бұрын
Congratulations 🎊 🎉 u r changing the world!!!!! 🌎
@omyadav18665 күн бұрын
Networking public Cisco certified network support Engineer jobs for
@CiscoSystems5 күн бұрын
Hey there, thanks for your interest in Cisco! You can view all of our available positions at: cs.co/6054igy7i. Wishing you the best of luck.
@omyadav18665 күн бұрын
Cisco networking data customer service support help
@omyadav18665 күн бұрын
Cisco Business support help
@omyadav18665 күн бұрын
Cisco support
@omyadav18665 күн бұрын
Cisco partner
@ivanbecerril42275 күн бұрын
My dream job
@MuhammadAbdullah-sx1tq5 күн бұрын
Nice product for cloud computing
@omyadav18667 күн бұрын
Cisco networking academy of science
@omyadav18667 күн бұрын
Cisco support help
@omyadav18667 күн бұрын
Cisco networking public Cisco certified network support Engineer
@omyadav18667 күн бұрын
Cisco working
@omyadav18667 күн бұрын
Support help Cisco systems incorporated data customer service device name Cisco certified network associate
@omyadav18667 күн бұрын
Support help Cisco certified network associate member since
@princeabdul42907 күн бұрын
What annoys me is I can't hide the screensharing panel, and whenever I give access to someone's, their name pops up which is annoying unlike zoom
@jaikrishna38147 күн бұрын
want to renew the SMB partner certificate renewal can anyone guide the procedure
@CiscoSystems7 күн бұрын
Hi there, thanks for your question! To renew your Cisco Small Business Partner certification, you will typically need to follow a set of steps that may include completing certain training requirements, passing exams, and possibly meeting sales targets or other performance metrics. Here's a general guide on how to proceed: Check Certification Status and Requirements: Log in to the Cisco Partner Portal to check the status of your current certification and to understand the specific renewal requirements for the Small Business Partner designation. Complete Required Training: Cisco often requires partners to complete certain training courses to stay up-to-date with the latest technologies and solutions. Look for any mandatory training or updates that may be required for renewal. Pass Any Necessary Exams: If your certification requires you to pass an exam for renewal, schedule and take the exam through a Cisco authorized testing center, such as Pearson VUE. Meet Performance Criteria: Some certifications may have performance criteria that you need to meet, such as a certain level of sales or a number of deployments. Ensure that you have met these criteria before applying for renewal. Submit Renewal Application: Once you have completed all the necessary steps, submit your renewal application through the Cisco Partner Portal. This may involve providing evidence of training completion, exam certifications, and any other required documentation. Pay Renewal Fees: If there are any fees associated with the renewal of your certification, make sure to pay them as part of the renewal process. Wait for Approval: After submitting your application, wait for Cisco to review your renewal request. They will notify you once your certification has been renewed or if there are any issues that need to be addressed. Maintain Compliance: After renewal, make sure to stay compliant with any ongoing requirements to maintain your certification status until the next renewal cycle. Please note that Cisco's certification and partnership programs are subject to change, so it's important to refer to the most current information provided by Cisco. If you have any questions or need assistance with the renewal process, you can contact Cisco Partner Support for guidance: cs.co/6055irgqP. We hope this information helps!
@mtf34317 күн бұрын
My switch flash went into RO mode how can I fix that.
@CiscoSystems7 күн бұрын
Hi there, we're sorry to hear about your experience, and there are a few steps you can take to try to resolve this issue. 1. Check Filesystem Status: First, check the status of the filesystem. You can do this by issuing the command `dir flash:` from the ROMMON prompt to see if the filesystem is indeed in read-only mode. 2. Attempt Filesystem Repair: Some Cisco devices have a filesystem check and repair utility that can be run from ROMMON. The command might look like `fsck flash:` or similar, depending on the model of the switch. This can potentially fix any filesystem errors and return it to read/write mode. 3. Change Filesystem Mode: If the filesystem is in read-only mode, you might be able to change its mode to read/write. This can sometimes be done with a command like `set FILESYSTEM_MODE rw`, again depending on the specific model and version of the switch. 4. Software Recovery: If the filesystem is corrupted, you may need to perform a software recovery. This typically involves using TFTP to load a new image onto the switch. You would need to set up a TFTP server with the correct IOS image and then use the `tftpdnld` command or similar from ROMMON to download and install the image. 5. Replace the Flash Memory: If the flash memory is physically damaged and that's why it's stuck in RO mode, you might need to replace the flash memory hardware. This is more complex and might require sending the switch to Cisco for repair or replacing the switch entirely. 6. Contact Cisco Support: If you're unable to resolve the issue on your own, it's a good idea to contact Cisco Technical Support. They can provide guidance specific to your model and situation, and if necessary, they can also provide repair services. Remember to always have a backup of your switch configuration and IOS image before attempting any recovery operations, and be aware that some operations can be disruptive and might require downtime. If you're not comfortable performing these steps, it's best to consult with Cisco Support. We hope this information helps!
@fkhr.8 күн бұрын
I was looking for cisco catalyst unboxing videos because I'm studying CCNA and what I found was Linus Sebastian?! what the hell is this guy everywhere? :v
@Thecoolestname379 күн бұрын
When I attempt to create the VPN after following this guide, after clicking Apply on the VPN -> OpenVPN page, I receive an endless "Please wait for a moment..." message that does not go away and does not throw any errors to help guide me. I have tried in Firefox and the most recent chromium Edge browsers
@CiscoSystems7 күн бұрын
Hi there, we're sorry to hear that you're having trouble. Have you also tried clearing your cookies/cache, and then try again in that browser. Please let us know if the issue persists, thanks!
@starlynrobinson9 күн бұрын
This guys hacking my phone so I can’t sign up for the ccna it’s weird he doesn’t want me to do network engineering I’m trying to login to Cisco.
@CiscoSystems7 күн бұрын
Hi there, we're sorry to hear about your experience, and we want to look into this further. Please send us an email at [email protected], with any helpful screenshots and information. We hope to hear back from you soon.
@B_knows_A_R_D-xh5lo10 күн бұрын
❤
@ladonnasellers376210 күн бұрын
Thank you! done!
@FollowerofChrist661810 күн бұрын
amazing content and well delivered. thank you
@prashanttripathi854810 күн бұрын
This video was incredibly informative! Thank you for breaking down the concepts so clearly.
Пікірлер
Great video Many people have the same request, please make video without background music
lol
Lies again? Love Spunk USD SGD
Lies again? AIA Money USD SGD
For the C1300-24XS model, Can it use the 4x10GBase-T RJ45 share combo ports as stacking ports?
Hi there, thanks for your question! The C1300-24XS model, typically has specific ports designated for stacking. However, whether the 4x10GBase-T RJ45 share combo ports can be used as stacking ports depends on the specific design and firmware capabilities of the switch. In many network switches, stacking ports are usually specialized and may not be interchangeable with regular Ethernet ports. The 4x10GBase-T RJ45 share combo ports are generally intended for high-speed network connections rather than stacking. To get a definitive answer, you should refer to the official documentation or user manual for the C1300-24XS model. Alternatively, you can contact the manufacturer's technical support for detailed information on the capabilities and configuration options of the switch. We hope this information helps!
Great video keep them making and uploading. 1. @ 1:13 you say "in the diagram here ....... " but there is no diagram slide. 2. Without background music would be great as listening to you would be easier as I find the music interfering. If you playback with and without music you might see the diffrence.
hi, can I see the speed of lag after config?
In the video, both active and standby switch. The first command the same “stack unit 1”. So if you add third switch member, the command is always “stack unit 1”
Cisco systems incorporated data customer service device name Cisco certified networking public Cisco support help
Support Cisco certified network associate member since A A
Look who’s selling out, yet again
Arista is so much better than Cisco for doing this type of Vide deployment.
Loud music and Doorbells...
No thanks(*_*)
Does it apply for fxos 4100 and 9300 series too?
Regenerating the default key ring certificate is a common task in network security appliances, like Cisco's Firepower eXtensible Operating System (FXOS). The FXOS 4100 series and Firepower 9300 series have a similar process, but there might be some variations in the interface and commands. We hope this info helps.
Okay cisco I seen that you changed the name to only 1300s now. Will dhcp server come to 1200s I bought a 1200 bc on this video saying it had dhcp server
Intéressed de here stages cisco réseaux
💯💯💯
Congratulations 🎊 🎉 u r changing the world!!!!! 🌎
Networking public Cisco certified network support Engineer jobs for
Hey there, thanks for your interest in Cisco! You can view all of our available positions at: cs.co/6054igy7i. Wishing you the best of luck.
Cisco networking data customer service support help
Cisco Business support help
Cisco support
Cisco partner
My dream job
Nice product for cloud computing
Cisco networking academy of science
Cisco support help
Cisco networking public Cisco certified network support Engineer
Cisco working
Support help Cisco systems incorporated data customer service device name Cisco certified network associate
Support help Cisco certified network associate member since
What annoys me is I can't hide the screensharing panel, and whenever I give access to someone's, their name pops up which is annoying unlike zoom
want to renew the SMB partner certificate renewal can anyone guide the procedure
Hi there, thanks for your question! To renew your Cisco Small Business Partner certification, you will typically need to follow a set of steps that may include completing certain training requirements, passing exams, and possibly meeting sales targets or other performance metrics. Here's a general guide on how to proceed: Check Certification Status and Requirements: Log in to the Cisco Partner Portal to check the status of your current certification and to understand the specific renewal requirements for the Small Business Partner designation. Complete Required Training: Cisco often requires partners to complete certain training courses to stay up-to-date with the latest technologies and solutions. Look for any mandatory training or updates that may be required for renewal. Pass Any Necessary Exams: If your certification requires you to pass an exam for renewal, schedule and take the exam through a Cisco authorized testing center, such as Pearson VUE. Meet Performance Criteria: Some certifications may have performance criteria that you need to meet, such as a certain level of sales or a number of deployments. Ensure that you have met these criteria before applying for renewal. Submit Renewal Application: Once you have completed all the necessary steps, submit your renewal application through the Cisco Partner Portal. This may involve providing evidence of training completion, exam certifications, and any other required documentation. Pay Renewal Fees: If there are any fees associated with the renewal of your certification, make sure to pay them as part of the renewal process. Wait for Approval: After submitting your application, wait for Cisco to review your renewal request. They will notify you once your certification has been renewed or if there are any issues that need to be addressed. Maintain Compliance: After renewal, make sure to stay compliant with any ongoing requirements to maintain your certification status until the next renewal cycle. Please note that Cisco's certification and partnership programs are subject to change, so it's important to refer to the most current information provided by Cisco. If you have any questions or need assistance with the renewal process, you can contact Cisco Partner Support for guidance: cs.co/6055irgqP. We hope this information helps!
My switch flash went into RO mode how can I fix that.
Hi there, we're sorry to hear about your experience, and there are a few steps you can take to try to resolve this issue. 1. Check Filesystem Status: First, check the status of the filesystem. You can do this by issuing the command `dir flash:` from the ROMMON prompt to see if the filesystem is indeed in read-only mode. 2. Attempt Filesystem Repair: Some Cisco devices have a filesystem check and repair utility that can be run from ROMMON. The command might look like `fsck flash:` or similar, depending on the model of the switch. This can potentially fix any filesystem errors and return it to read/write mode. 3. Change Filesystem Mode: If the filesystem is in read-only mode, you might be able to change its mode to read/write. This can sometimes be done with a command like `set FILESYSTEM_MODE rw`, again depending on the specific model and version of the switch. 4. Software Recovery: If the filesystem is corrupted, you may need to perform a software recovery. This typically involves using TFTP to load a new image onto the switch. You would need to set up a TFTP server with the correct IOS image and then use the `tftpdnld` command or similar from ROMMON to download and install the image. 5. Replace the Flash Memory: If the flash memory is physically damaged and that's why it's stuck in RO mode, you might need to replace the flash memory hardware. This is more complex and might require sending the switch to Cisco for repair or replacing the switch entirely. 6. Contact Cisco Support: If you're unable to resolve the issue on your own, it's a good idea to contact Cisco Technical Support. They can provide guidance specific to your model and situation, and if necessary, they can also provide repair services. Remember to always have a backup of your switch configuration and IOS image before attempting any recovery operations, and be aware that some operations can be disruptive and might require downtime. If you're not comfortable performing these steps, it's best to consult with Cisco Support. We hope this information helps!
I was looking for cisco catalyst unboxing videos because I'm studying CCNA and what I found was Linus Sebastian?! what the hell is this guy everywhere? :v
When I attempt to create the VPN after following this guide, after clicking Apply on the VPN -> OpenVPN page, I receive an endless "Please wait for a moment..." message that does not go away and does not throw any errors to help guide me. I have tried in Firefox and the most recent chromium Edge browsers
Hi there, we're sorry to hear that you're having trouble. Have you also tried clearing your cookies/cache, and then try again in that browser. Please let us know if the issue persists, thanks!
This guys hacking my phone so I can’t sign up for the ccna it’s weird he doesn’t want me to do network engineering I’m trying to login to Cisco.
Hi there, we're sorry to hear about your experience, and we want to look into this further. Please send us an email at [email protected], with any helpful screenshots and information. We hope to hear back from you soon.
❤
Thank you! done!
amazing content and well delivered. thank you
This video was incredibly informative! Thank you for breaking down the concepts so clearly.
That's nice
That's great work
Perfect
Nice work
Appreciate that
Great 👍👍