Thanks for thinking to share this. Hasn't happened yet but I'm sure glad to have the knowledge in case. Thanks again!
@brokentoe5702 күн бұрын
Too much talk about the truck. Get on with it!
@edhead355 күн бұрын
❤
@angelalee86158 күн бұрын
What is the part number or name? I search vacuum pump and nothing comes up
@adembajrami137310 күн бұрын
i just bought this same truck today and it’s just as bad as yours i was wondering since you live in MA do you know any good guy that can fix that for me the rest of the body is in perfect shape except that area is really bad
@RCBGarage10 күн бұрын
Most shops won’t touch rust repair. 1) The rust always comes back 2) The repairs are so expensive it doesn’t make sense on a 12 year old truck. I would attempt to fix it yourself.
@timtoolie12 күн бұрын
I have a 2006 Prowler as well. Mine is Red. I had all the same issues that you did. I just had the top end rebuilt, trans rebuilt, and I had to straighten the passenger side front end as well. I also installed a winch. All in all, it's not the best brand of UTV's out there, but when it runs, it's a friggin tank! I live in northern Michigan and I've never had a problem driving in the woods deer hunting or pushing snow with it. your video's on the Prowler were awesome. I'm going to take some of your ideas and put them to use on mine.
@tonnylopez910712 күн бұрын
Awsome video bro I need to replace my whole swing arm nd bearing housing thank u for da video
@terryyoung147314 күн бұрын
what are the chances my 2015 mini Cooper has this pump cause everything you described I have been chasing for three months and well I am still locked up drivers side front caliper we will find out 2day most of all I wanna say thank you very much you and your video have given me a little light at the end of this tunnel call my car before I watched your video I wanna say I didn't give up I was pausing and reflecting for a while cuz at times this problem was affecting my life negatively thank you again I am going after lt again needless to the brake Gods have been kicking my ass but you have given hope Terry young
@JeffMorris-xf3lf15 күн бұрын
My god man get to the point and quit telling us how rich you think are. Do what the video title says. I’m out at 6 min.
@boomboombaker3215 күн бұрын
You removed the retainer clip but didn't pull the cam shaft why not it would have slid right out inspect bearings and everything just s though ?
@Electricianarchery15 күн бұрын
What do you think the problem was
@daveyhogan533220 күн бұрын
I need some help to mine dont want to let go. I replaced caliber and pads. Didn't fix it.
@RCBGarage20 күн бұрын
Change the rubber line
@daveyhogan533220 күн бұрын
@@RCBGarage I just did changed both front lines calibers. I changed the pads on the front an back. And it's still stuck.
@RCBGarage19 күн бұрын
@daveyhogan5332 Change the lines, when you replace a caliber you always replace the line as well
@daveyhogan533219 күн бұрын
@@RCBGarage I did replaced it all except rotors but my rere ass put the pad on wrong bunny ears on the pad goes on inside of caliber flat pad on outside. I fixed it I'm an idiot. Rushing
@daveyhogan533220 күн бұрын
I have a 2011 5.0 lariat same problem the pads are burning the rotor.
@SaltyBob35521 күн бұрын
1000% better!
@Romaan.21 күн бұрын
Part 2?
@SaltyBob35521 күн бұрын
What grit honing stones do you use? BTW, you have a following among the community. I was sent to your channel from The ATV Hustle if I remember right.
@RCBGarage21 күн бұрын
@@SaltyBob355 Thanks for checking out the channel! The stones I use are made by Norton. aluminum oxide oil stone fine grit.
@krustythecarhauler22 күн бұрын
It goes to the top of the air box
@krustythecarhauler22 күн бұрын
Dude I have 4 Ltz250 there a great machine that’s my opinion on it they are hard to kill lol
@RichardPolley25 күн бұрын
I have a question my grandson chain come off and broke the left side of his crankcase part of the gearshift lip and part of the casing. Oil ran out of it can i change the left side of the casing without take the motor out or the top end off
@RichardPolley25 күн бұрын
My grandson chain come of and broken the crankcase right below the shifter. Do i half to take the top end all off the change the left side case on a Kawasaki 400 kfx
@RCBGarage25 күн бұрын
@@RichardPolley You need to split the cases, the entire engine needs to come apart!
@RichardPolley25 күн бұрын
@@RCBGarage ok thank you
@RichardPolley25 күн бұрын
Can a person case the left side of the crankcase on a ftx 400 Kawasaki with out pull the head and top end
@RichardPolley25 күн бұрын
Kfx I meam
@RCBGarage25 күн бұрын
@@RichardPolley The top end needs to come off. The engine needs to be removed from the frame to split the cases.
@BobMoth_26 күн бұрын
No matter what don't stop making videos your so helpful
@lucastoczek278428 күн бұрын
Hello, could you give me the exact measurements of all the bearings and seals? I have a quadricycle like this here in Brazil, but no parts of this quadricycle can be found here.
@bryceberliner2174Ай бұрын
Hey man great video! I know it’s been a couple years since you’ve posted but just wondering if you recommend replacing the rear lines too? I changed the front 2 rubber brake lines and it seemed to fix the issue for a bit but the famous screeching and brake staying engaged has returned only after driving for about 20-30min. Do you think it’s the pump?
@RCBGarageАй бұрын
Try flushing the fluid
@lescarthen985Ай бұрын
You do not have to remove the lower control arm on that Dodge Dart I have been working on vehicles for 42 years you do not have to remove the lower control arm there is an easier way using a pry bar and an exhaust clamp too Pride down off of the lower ball joint
@dimitri.purba.Ай бұрын
add a bit of transmission oil to make it slide👍
@manuelgutierrez908Ай бұрын
My wife bought this same truck. In 3 months we've put $3,000 into it. People, buy Chevy. Easier and cheaper. Facts
@DevonishMurphyАй бұрын
Partlist?
@dsmasynergyАй бұрын
Very informative, thanks for making this video. Ignore the negative comments as they don't contribute anything useful.
@igravitz8075Ай бұрын
The idle rpm is high , how to fix that?
@bammbamm843Ай бұрын
That is a damm good looking quad
@johnbeckham1483Ай бұрын
I have a 2014 Dodge Dart SXT and it has been a great car for the most part! The Dart was rushed to the market prematurely due to the 9 speed automatic transmission not being available as it was in the original 2012 Dodge Dart designs! To get the Dodge Dart on the market quicker FCA used a 6 speed auto 6F24 transmission from Hyundai in lieu of the 9 speed auto!
@StayFitRideYourBikeАй бұрын
Thanks for the video, my cable broke too. If you don't mind ne asking, what lift do you have & where did you get it? I have a low ceiling garage & that kind of lift would work great for me. Thanks.
@RCBGarageАй бұрын
They are called quick jacks, they lift 5500 lbs. 2 foot lift hight
@rolop847Ай бұрын
Most of the problems is caused by lack of oil and pushing it hard.
@exileonwii7094Ай бұрын
Could I send the parts out and pay for you to do the mod
@RCBGarageАй бұрын
It will be expensive to have me do it plus shipping two ways. Give it a try yourself. If you make a mistake the side covers are cheap to buy on eBay.
@islapcats2414Ай бұрын
80$!? just bought one for my 20 GT for 40
@anthonycondon1132Ай бұрын
Nice work. I'm looking forward to next week's installment
@BUTRINTNYАй бұрын
Just replaced :rotors,calipers,brake pads for this issue ….
@DavArroyo72422 ай бұрын
Same thing happened to mine, but I also have the kick-start kit, so it adds a whole more of a pain to get it apart!!!
@jtgross23242 ай бұрын
I’m going through this same no spark issue on an 05 ordered a new stator hope this solves the issue!
@clinton-conrad-welderАй бұрын
did it? mine comes tommoorw
@jtgross2324Ай бұрын
@@clinton-conrad-welder yes
@proxc20772 ай бұрын
Never would of guessed that.
@sman33472 ай бұрын
Sounds EXACTLY like my problem. Headed Rock Auto to order
@nickbowling05142 ай бұрын
Did it fix it?
@MelloowTvАй бұрын
What’s the name of that part ?
@proxc20772 ай бұрын
The entire powersports market is the same up here in central Maine.
@RCBGarage2 ай бұрын
Hopefully it turns around soon!
@JoeBrown-dt8vy2 ай бұрын
Super helpful thankful for the video!!!
@Ramcat_Vlogs2 ай бұрын
When I rebuilt my grizzly 350 the wrist pin I had to use my hammer drill to hammer it out 😂 i blew it up again and just got a new motor recently for $200. I’m gonna build a 1of1 grizzly 450 now with warrior and raptor 350 parts gonna send someone a stroker warrior crank and my blow crank and have them switch the connecting rods. Also looking for a warrior head and a flat slide carb. Mainly as a F you to previous me and what I now know 😂
@gobigrey93522 ай бұрын
Same with my 2007 f150. Front driver brake is dragging intermittently.
@rlyell4372 ай бұрын
where can i find a video that shows putting carb together not in fast forward????
@RCBGarage2 ай бұрын
You can slow the video speed down if you go into settings and then speed.
@BisonWorkshop2 ай бұрын
im willing to bet that putting it back together correctly will fix it.
@RCBGarage2 ай бұрын
Watch the next video you won’t believe what’s wrong!
@dreece20002 ай бұрын
Man everything but the mixture of guns and roses and nirvana is good.
Пікірлер
Thanks for thinking to share this. Hasn't happened yet but I'm sure glad to have the knowledge in case. Thanks again!
Too much talk about the truck. Get on with it!
❤
What is the part number or name? I search vacuum pump and nothing comes up
i just bought this same truck today and it’s just as bad as yours i was wondering since you live in MA do you know any good guy that can fix that for me the rest of the body is in perfect shape except that area is really bad
Most shops won’t touch rust repair. 1) The rust always comes back 2) The repairs are so expensive it doesn’t make sense on a 12 year old truck. I would attempt to fix it yourself.
I have a 2006 Prowler as well. Mine is Red. I had all the same issues that you did. I just had the top end rebuilt, trans rebuilt, and I had to straighten the passenger side front end as well. I also installed a winch. All in all, it's not the best brand of UTV's out there, but when it runs, it's a friggin tank! I live in northern Michigan and I've never had a problem driving in the woods deer hunting or pushing snow with it. your video's on the Prowler were awesome. I'm going to take some of your ideas and put them to use on mine.
Awsome video bro I need to replace my whole swing arm nd bearing housing thank u for da video
what are the chances my 2015 mini Cooper has this pump cause everything you described I have been chasing for three months and well I am still locked up drivers side front caliper we will find out 2day most of all I wanna say thank you very much you and your video have given me a little light at the end of this tunnel call my car before I watched your video I wanna say I didn't give up I was pausing and reflecting for a while cuz at times this problem was affecting my life negatively thank you again I am going after lt again needless to the brake Gods have been kicking my ass but you have given hope Terry young
My god man get to the point and quit telling us how rich you think are. Do what the video title says. I’m out at 6 min.
You removed the retainer clip but didn't pull the cam shaft why not it would have slid right out inspect bearings and everything just s though ?
What do you think the problem was
I need some help to mine dont want to let go. I replaced caliber and pads. Didn't fix it.
Change the rubber line
@@RCBGarage I just did changed both front lines calibers. I changed the pads on the front an back. And it's still stuck.
@daveyhogan5332 Change the lines, when you replace a caliber you always replace the line as well
@@RCBGarage I did replaced it all except rotors but my rere ass put the pad on wrong bunny ears on the pad goes on inside of caliber flat pad on outside. I fixed it I'm an idiot. Rushing
I have a 2011 5.0 lariat same problem the pads are burning the rotor.
1000% better!
Part 2?
What grit honing stones do you use? BTW, you have a following among the community. I was sent to your channel from The ATV Hustle if I remember right.
@@SaltyBob355 Thanks for checking out the channel! The stones I use are made by Norton. aluminum oxide oil stone fine grit.
It goes to the top of the air box
Dude I have 4 Ltz250 there a great machine that’s my opinion on it they are hard to kill lol
I have a question my grandson chain come off and broke the left side of his crankcase part of the gearshift lip and part of the casing. Oil ran out of it can i change the left side of the casing without take the motor out or the top end off
My grandson chain come of and broken the crankcase right below the shifter. Do i half to take the top end all off the change the left side case on a Kawasaki 400 kfx
@@RichardPolley You need to split the cases, the entire engine needs to come apart!
@@RCBGarage ok thank you
Can a person case the left side of the crankcase on a ftx 400 Kawasaki with out pull the head and top end
Kfx I meam
@@RichardPolley The top end needs to come off. The engine needs to be removed from the frame to split the cases.
No matter what don't stop making videos your so helpful
Hello, could you give me the exact measurements of all the bearings and seals? I have a quadricycle like this here in Brazil, but no parts of this quadricycle can be found here.
Hey man great video! I know it’s been a couple years since you’ve posted but just wondering if you recommend replacing the rear lines too? I changed the front 2 rubber brake lines and it seemed to fix the issue for a bit but the famous screeching and brake staying engaged has returned only after driving for about 20-30min. Do you think it’s the pump?
Try flushing the fluid
You do not have to remove the lower control arm on that Dodge Dart I have been working on vehicles for 42 years you do not have to remove the lower control arm there is an easier way using a pry bar and an exhaust clamp too Pride down off of the lower ball joint
add a bit of transmission oil to make it slide👍
My wife bought this same truck. In 3 months we've put $3,000 into it. People, buy Chevy. Easier and cheaper. Facts
Partlist?
Very informative, thanks for making this video. Ignore the negative comments as they don't contribute anything useful.
The idle rpm is high , how to fix that?
That is a damm good looking quad
I have a 2014 Dodge Dart SXT and it has been a great car for the most part! The Dart was rushed to the market prematurely due to the 9 speed automatic transmission not being available as it was in the original 2012 Dodge Dart designs! To get the Dodge Dart on the market quicker FCA used a 6 speed auto 6F24 transmission from Hyundai in lieu of the 9 speed auto!
Thanks for the video, my cable broke too. If you don't mind ne asking, what lift do you have & where did you get it? I have a low ceiling garage & that kind of lift would work great for me. Thanks.
They are called quick jacks, they lift 5500 lbs. 2 foot lift hight
Most of the problems is caused by lack of oil and pushing it hard.
Could I send the parts out and pay for you to do the mod
It will be expensive to have me do it plus shipping two ways. Give it a try yourself. If you make a mistake the side covers are cheap to buy on eBay.
80$!? just bought one for my 20 GT for 40
Nice work. I'm looking forward to next week's installment
Just replaced :rotors,calipers,brake pads for this issue ….
Same thing happened to mine, but I also have the kick-start kit, so it adds a whole more of a pain to get it apart!!!
I’m going through this same no spark issue on an 05 ordered a new stator hope this solves the issue!
did it? mine comes tommoorw
@@clinton-conrad-welder yes
Never would of guessed that.
Sounds EXACTLY like my problem. Headed Rock Auto to order
Did it fix it?
What’s the name of that part ?
The entire powersports market is the same up here in central Maine.
Hopefully it turns around soon!
Super helpful thankful for the video!!!
When I rebuilt my grizzly 350 the wrist pin I had to use my hammer drill to hammer it out 😂 i blew it up again and just got a new motor recently for $200. I’m gonna build a 1of1 grizzly 450 now with warrior and raptor 350 parts gonna send someone a stroker warrior crank and my blow crank and have them switch the connecting rods. Also looking for a warrior head and a flat slide carb. Mainly as a F you to previous me and what I now know 😂
Same with my 2007 f150. Front driver brake is dragging intermittently.
where can i find a video that shows putting carb together not in fast forward????
You can slow the video speed down if you go into settings and then speed.
im willing to bet that putting it back together correctly will fix it.
Watch the next video you won’t believe what’s wrong!
Man everything but the mixture of guns and roses and nirvana is good.