Welcome to Aspen Offroad! We are bringing you the highest quality content we can as we share our adventures taking the Mavericks all across the eastern United States. You can expect behind the scenes footage and coverage of all the details that go into making successful trips.
Пікірлер
Any idea what size those bolts were that you threaded into the primary while reinstalling to have leverage to tighten?
Harbor Freight UTV Jack is great for the price❤Use it in my X3 max and my Rzr
My son’s belt broke and he recently put on a new one and it slipped off too, any recommendations as to what could be the problem ? Interesting video thank you !
Thanks. Hard to say what might be causing that issue without seeing it.
Would changing this bearing fix not shifting out of high
If this bearing is seized (spinning with the primary instead of independent) it will make all shifts from and to any gear difficult or grind.
Good work canam x3 cluth
So for a side by side, how would you rate it? Fun? I used to ride the dirt bike track back in the day when Carmichael was on his 100.
It is a ton of fun. First experience with any SxS and we love them. For all the speed/ power they are still really good at technical trails too.
Cool, thanks@@Aspenoffroad
any update after returning from KWI after the float mod?
Oh yes. It's awesome. I mic-ed the sheaves before they left and both had significant issues. KWI really smoothed the engament off idle and perfectly centered the belt. Several rides later and no problems changing gears anymore.
Dude. so this video is top notch - I'm no mechanic but I think this is achievable for me. One stupid question - I blew up a belt at 80MPH and shot it out the inside cover. 2020 X3 RS Turbo R. I'm going to replace the covers and do the bearing and service kit (not the rebuild) while im in there. Everything Looks similar on mine - but is it? Is there anything I need to know about doing my RS Turbo R vs. your model? Any input helps.
All the "QRS" clutches from 2018 to 2021 are the same. Even the secondary clutch on the 22 and 23 models are the same. I've heard there may be different weights in there but the service will be done the same way. Thanks.
What size bolts did you use on the primary length and where m6 ? Thx
I'm a little confused, are you asking the length of the bolts I used to hold the primary still to torque? Or the length of the actual primary bolt that threads into the trans shaft?
@@Aspenoffroad sorry, I was asking specifically about the bolts used to hold the primary while u used the pry bar to torque down. If you had the length and what size they were to fit the threads.
@@dcsann I had those bolts from a Craftsman pulley puller kit. No idea the size or threads. However, the bolts in the QRS primary splitter kit from KWI would also work.
You can take the kwi tool and re-attach the plate and cap bolts and a bolt or rod in the side to hold the primary and torque the clutch bolt. That's how I've done it. Good video
Hi, what kind of bearing grease did you use and what are good substitutes?
I'm not sure the exact grease is really important as long as it's thick and put in conservatively. Don't want any grease on the belt.
@@Aspenoffroad thanks for the reply, I found it after.....Kluber Isoflex....listed on the BRP website in the exploded diagrams....in case anyone else asks.
@@danalig4565which weight
Great video brother . I’m getting ready to install my PDrive Primary on my 2022 base DS 120 X3. Just picked up a new torque wrench and my primary puller came in the other night .
I still had a bearing issue. Decided on KWI float mod to solve oem issues. I'll post about that soon, hopefully.
@@Aspenoffroad awesome video! Intrigued to find out what you had found out, far as I researched it looks like that is the only fix for this issue. My secondary loves to spin right along with my primary, assuming that was the issue that you had. Mines a 22 with 800 miles on it & I believe its toast.
@Joshua Smeal On mine the belt vibrations caused by the imperfect OEM machine work of all sheaves was bad enough to wear the bearing inner face washer away within 15mi of riding. I sent it to KWI for the float mod and it's been perfect ever since. Perfectly aligned. I did verify the oem sheaves were at least 0.015" warped on all surfaces.
Wow that’s all crazy . I’m at 1,052 miles and mines fine on my 2022 DS 120 . My PDrive install went fine and no codes thrown or anything . Took a first mountain trip ride last weekend and everything is working as it should . PDrive is much quieter and smoother and quicker engaging , however it did seem to take away some of the 120s “punchiness” for lack of better description.
@Joe Kearney I believe the quality of the Pdrive is higher and less prone to wear. Glad to hear it's working well.
not "rolled"--it's called a flop
Thanks for video, it was awesome, and views count should be higher, search for g e t 4 v i e w s for automatic promotion on KZread
'Promosm'
hi Elliot, the primary clutch bearing that you disassembled in this video only rotates in one direction ??. the bearing acts as a brake on the downhill engine exactly??, could you tell me the diameter of the shaft where the bearing is mounted and the dimensions of the bearing? can I leave you or write you an email ??..thanks Leonardo
I'd have to take it all apart to get those dimensions, that's not happening unless I have a need. The bearing can rotate in both directions but it only needs to spin in one direction, and only then when the secondary clutch is not spinning. It's primary function is to allow the secondary clutch to not be driven at idle speeds to allow gear changes.
@@Aspenoffroad ok grazie
How is running after you replaced it?
Its been great, way less noise and much smoother shifting.
Additional update. It's still an issue. Appears the OEM misalignment or warping of the belt surfaces has killed that inside washer in about 25mi of running. Update when it comes back from KWI for the float mod.
Thanks for expanding your content! Great to see you have fun and maintain your vehicles!
Glad you enjoy it!
Thanks for taking the time to share this, guys! 😉
Thanks! I believe in the future I'll have Bill as the camera man to catch more of our usual banter.
It almost simulated I was driving. How can you have approximately 260 views and only 4 likes. Thumbs up
I like shorts, I think you need a better dip, stick. To pre measure.
It looks like you guys had fun… I enjoyed the on-screen comments, but pull your camera off the mounts and give us a bit of narration, I think that would really go a long way. Looking forward to seeing what sort of shenanigans you get in next time!
I'll have to think of that next time. We decided to go riding late in the day and tried to reach a specific spot before it got dark, failed, and still had to unload in the dark. Thanks.
Love seeing you guys joke at the end. Looks like a fun day!
What happened to the antenna? Customized
A minor miscalculation of height and weight.
Welcome to the world of mavericks, Bill! You have a sweet ride there and I look forward to seeing what you do with it
Thanks! We're already planning the next adventure.
Time stamp 5:40 is that really a path? Is the track a circle, go fast turn left? It was a beautiful day. No spills is a plus. At least he didn't try running over any FJs
This is the open trail area, you can go any which way. We were looking for obstacles and challenges.
More drone shots! Can I take my Honda on trail 12?
Boop
How many upsets have you had?
We've both been on our sides but nowhere close to being on our roofs or a full roll. 🥳
Any before and after pictures? Just curious
@@christineschiebel2890 I suppose I have a few of mine from when we picked it up.
Looks like fun!
Great first video can't wait to see more!
More on the way.
Love to see a Ford 100E rebuilt as a gasser - small compact and reasonably aerodynamic