Yikes, my 2004 XLT doesn't have the cluster surround attached to that next part to the right, so pulling the cluster is way quicker. Just pull the two screws in the top of the surround, drop the wheel all the way down, shift to 1st to give yourself room to slide the surround out, then pull the four screws that actually mount the cluster.
@romanhlubucek67134 ай бұрын
firma to ma přivest smontovane a hotove k sekani
@DaveAndDawn05265 ай бұрын
Super THANKS for posting this… HUGELY helpful + bonus advice!
@assetto27739 ай бұрын
Panzer Evo or H500?
@Mr91495osh10 ай бұрын
Plenty of Cub cadet “how to” videos on KZread
@Mr91495osh10 ай бұрын
Lift deck before driving off pallet
@Mr91495osh10 ай бұрын
Disengage transmission before pushing by hand,
@Mr91495osh10 ай бұрын
HomeDepot did most of this already for me
@Mr91495osh10 ай бұрын
Cub cadet has been making these lawn tractors for years, they know what they’re doing
@Mr91495osh10 ай бұрын
Remember to lower tire pressure to 14 front and 10 rear. This will effect your cutting height.
@Mr91495osh10 ай бұрын
The 18 HP Is ok for flat ground. My yard has hills, so I got a 23 HP. FUNNY thing is I still use only half throttle.
@Mr91495osh10 ай бұрын
Got mine two weeks ago
@741godis110 ай бұрын
Would it be the same way for the 2004 explorer sport Trac xlt???
@bryandelacruz3842 Жыл бұрын
sir do you have a separate video of installing your cougar core box?? im having problems with mine🥲
@redbird1824 Жыл бұрын
The lights ain't the only thing that ain't too bright.Must be a city boy in the country.
@user-vh7vw4zs3g Жыл бұрын
This was comical. Well, that's one way to get it off the crate. I'll probably do the same haha. Thanks for the video. It helped!
@rockthesix1679 Жыл бұрын
Or just buy one from a local dealer and avoid all the BS of uncrating and assembly.
@geohovo Жыл бұрын
Dude so many mishaps but better you than me lol thanks
@tracyshort3487 Жыл бұрын
Thank you!!! You are the best!! I took my whole steering panel apart because I found a bolt on the floor by the gas pedal.. I still had to take it in because it was to my shifter and I couldn't reach it BUT the a$$ho wouldn't put it back together because I had taken it apart.. That was 2 years ago I just found your video and it took me all of 2 hours and it looks good as new ❤
@pepikostadinov444 Жыл бұрын
☺👍🏻👍🏻SAMSUNG UBD-K8500 4K ULTRA HD BLU-RAY-PLAYER
@alambe7275 Жыл бұрын
Very nice set up, but put your height channels up on the wall near the ceiling and have them fire down at your listening position. It was sound way better than what it sound now to you.
@Coolvo113 Жыл бұрын
Yeah it made a huge difference, I actually did this shortly after making this video!
@MountainManFred Жыл бұрын
Odd question here: If you remove this, and send it out for repair, is the truck driveable? Thanks in advance
@nanook5875 Жыл бұрын
I search for how to remove the cluster for a 2002 thunderbird and a fucking explorer pops up! Totally worthless!
@mattmmilli8287 Жыл бұрын
This video just made me get back something important that slipped behind near speedometer. Thank youuu
@christophersmith5116 Жыл бұрын
3 Years later and your video helped me today! Thanks.
@thomasschwarting51082 жыл бұрын
Having the internet for KZread videos are fantastic!! So much information out there with other people willing to share their findings. It's a wonderful thing!!
@luisgregoryhinojosa2 жыл бұрын
Hey buddy I know it’s a bit old video. But is there a internal speaker( door ajar )behind it ?
@Coolvo1132 жыл бұрын
Behind what exactly? The dash cluster?
@luisgregoryhinojosa2 жыл бұрын
@@Coolvo113 yes because I’m experiencing a buzzing ring similar to a door opening or pressing the buttons on the mid console. It goes on steadily at about 2000 rpm’s about 60 mph. Tried a new cluster to see if that helps. Still getting that beeping behind the cluster. Have no idea it is , maybe something electrical. It’s driving me crazy.
@luisgregoryhinojosa2 жыл бұрын
Yes behind the cluster
@TheSpoolin772 жыл бұрын
Tip, put the steering wheel on the splines, but don’t install the steering bolt until you drive around the yard once or twice to make sure the mower is going in a straight line, then line up the steering wheel and bolt it on.
@Filthycasual1232 жыл бұрын
my 200c has like a crease under the doors on the jack points so do I put the jack under that
@cezz11052 жыл бұрын
I had a lg c6 that also had the yellow tint on it.🤨
@Coolvo1132 жыл бұрын
I have also heard other people talk about this.
@hurshelcawvey45352 жыл бұрын
Good stuff
@corbana47432 жыл бұрын
What a stupid design, going thru the same reverse issues, torn gears
@LeoHsu812 жыл бұрын
Love the cats!
@tragicanomaly17072 жыл бұрын
What's happening to mine is, when I go full throttle something is slipping out of gear and when I shut she sled off and restart it, the problem corrects itself until I go full throttle again. Any idea what this is?
@hondagoal2 жыл бұрын
Great post Justin. thanks.
@mwand892 жыл бұрын
When it comes to the quality of outdoor power equipment, they make them cheap with plastic parts these days. I learned that their transmissions are made of plastic.
@chadwarner83062 жыл бұрын
Could you please post a list of item part# and a good source to purchase them from. Thanks
@TheCarterHour2 жыл бұрын
Thanks Bro for pointing this out. Had a real hard time dealing with jacking up our 2015 200C AWD.
@Coolvo1132 жыл бұрын
Glad I could help man!
@aditya-garg2 жыл бұрын
August is the worst in terms of customer support, their support does not help when I approached them to issues connecting Doorbell Cam Pro with wifi(never connects). I told them its being sold on Amazon India and they say their product works only in USA and Canada, not even bothered to monitor their own goods. After over 1 year of chasing,finally got my money back, no point investing in their ecosystem which requires separate bridge for lock to have remote connectivity.
@rajuvasupalli59172 жыл бұрын
Hi
@zadynplays80472 жыл бұрын
Can’t wait to get my X and elite plus like 6 other controllers
@mecobrown29302 жыл бұрын
I don’t know what to do with mines it sitting in the living room cracked
@foudulabo59572 жыл бұрын
Hello excuse me for my horrible english. I have the same case and same motherboard , and i can't make watercooling fan inside the case like you . I've followed the same way , make watercooling fan outside above the radiator and pull . Your C° are correct? Did you manage fans inside the case later ? If yes,how?
@splitvessel23872 жыл бұрын
That is a cute cat
@JonathanGrandt2 жыл бұрын
Can’t wait to install my wheel spinner! 😆
@JonathanGrandt2 жыл бұрын
Getting that hood cover on is NOT easy.
@rogernelson13903 жыл бұрын
Will a dash out of an 06 explorer fit an 2003
@Coolvo1133 жыл бұрын
I don’t believe so, I think the production line stopped in 2005, so 2003-2005 would work but I’m not 100% sure so I would check just to make sure.
@rogernelson13903 жыл бұрын
Yeah I got s wrecked 06 bought an 03 yesterday with a broke shifter I thought hell I'll change the whole dash if I could
@victordelafuente2553 жыл бұрын
I've had my LG OLED 77" Signature Series on the stand for three years, and now we want to wall mount it and noticed we don't have the two brackets needed to hold the base to the back of the TV. Do you know where I can buy them or are you willing to sell my yours? Thank you!
@Coolvo1133 жыл бұрын
I would do a eBay search or look around on google bud. Hope that helps.
@spiderman420123 жыл бұрын
kzread.info/dash/bejne/eH5o2dKzosSroMY.html
@danielsegewitz69563 жыл бұрын
Nice video. If you still have the footage, i would realy like to see how you connected up all those fans.
@Coolvo1133 жыл бұрын
I linked their controls all together and then daisy chained the power together and hooker the power to a molex adapter if that makes sense!?
Пікірлер
Yikes, my 2004 XLT doesn't have the cluster surround attached to that next part to the right, so pulling the cluster is way quicker. Just pull the two screws in the top of the surround, drop the wheel all the way down, shift to 1st to give yourself room to slide the surround out, then pull the four screws that actually mount the cluster.
firma to ma přivest smontovane a hotove k sekani
Super THANKS for posting this… HUGELY helpful + bonus advice!
Panzer Evo or H500?
Plenty of Cub cadet “how to” videos on KZread
Lift deck before driving off pallet
Disengage transmission before pushing by hand,
HomeDepot did most of this already for me
Cub cadet has been making these lawn tractors for years, they know what they’re doing
Remember to lower tire pressure to 14 front and 10 rear. This will effect your cutting height.
The 18 HP Is ok for flat ground. My yard has hills, so I got a 23 HP. FUNNY thing is I still use only half throttle.
Got mine two weeks ago
Would it be the same way for the 2004 explorer sport Trac xlt???
sir do you have a separate video of installing your cougar core box?? im having problems with mine🥲
The lights ain't the only thing that ain't too bright.Must be a city boy in the country.
This was comical. Well, that's one way to get it off the crate. I'll probably do the same haha. Thanks for the video. It helped!
Or just buy one from a local dealer and avoid all the BS of uncrating and assembly.
Dude so many mishaps but better you than me lol thanks
Thank you!!! You are the best!! I took my whole steering panel apart because I found a bolt on the floor by the gas pedal.. I still had to take it in because it was to my shifter and I couldn't reach it BUT the a$$ho wouldn't put it back together because I had taken it apart.. That was 2 years ago I just found your video and it took me all of 2 hours and it looks good as new ❤
☺👍🏻👍🏻SAMSUNG UBD-K8500 4K ULTRA HD BLU-RAY-PLAYER
Very nice set up, but put your height channels up on the wall near the ceiling and have them fire down at your listening position. It was sound way better than what it sound now to you.
Yeah it made a huge difference, I actually did this shortly after making this video!
Odd question here: If you remove this, and send it out for repair, is the truck driveable? Thanks in advance
I search for how to remove the cluster for a 2002 thunderbird and a fucking explorer pops up! Totally worthless!
This video just made me get back something important that slipped behind near speedometer. Thank youuu
3 Years later and your video helped me today! Thanks.
Having the internet for KZread videos are fantastic!! So much information out there with other people willing to share their findings. It's a wonderful thing!!
Hey buddy I know it’s a bit old video. But is there a internal speaker( door ajar )behind it ?
Behind what exactly? The dash cluster?
@@Coolvo113 yes because I’m experiencing a buzzing ring similar to a door opening or pressing the buttons on the mid console. It goes on steadily at about 2000 rpm’s about 60 mph. Tried a new cluster to see if that helps. Still getting that beeping behind the cluster. Have no idea it is , maybe something electrical. It’s driving me crazy.
Yes behind the cluster
Tip, put the steering wheel on the splines, but don’t install the steering bolt until you drive around the yard once or twice to make sure the mower is going in a straight line, then line up the steering wheel and bolt it on.
my 200c has like a crease under the doors on the jack points so do I put the jack under that
I had a lg c6 that also had the yellow tint on it.🤨
I have also heard other people talk about this.
Good stuff
What a stupid design, going thru the same reverse issues, torn gears
Love the cats!
What's happening to mine is, when I go full throttle something is slipping out of gear and when I shut she sled off and restart it, the problem corrects itself until I go full throttle again. Any idea what this is?
Great post Justin. thanks.
When it comes to the quality of outdoor power equipment, they make them cheap with plastic parts these days. I learned that their transmissions are made of plastic.
Could you please post a list of item part# and a good source to purchase them from. Thanks
Thanks Bro for pointing this out. Had a real hard time dealing with jacking up our 2015 200C AWD.
Glad I could help man!
August is the worst in terms of customer support, their support does not help when I approached them to issues connecting Doorbell Cam Pro with wifi(never connects). I told them its being sold on Amazon India and they say their product works only in USA and Canada, not even bothered to monitor their own goods. After over 1 year of chasing,finally got my money back, no point investing in their ecosystem which requires separate bridge for lock to have remote connectivity.
Hi
Can’t wait to get my X and elite plus like 6 other controllers
I don’t know what to do with mines it sitting in the living room cracked
Hello excuse me for my horrible english. I have the same case and same motherboard , and i can't make watercooling fan inside the case like you . I've followed the same way , make watercooling fan outside above the radiator and pull . Your C° are correct? Did you manage fans inside the case later ? If yes,how?
That is a cute cat
Can’t wait to install my wheel spinner! 😆
Getting that hood cover on is NOT easy.
Will a dash out of an 06 explorer fit an 2003
I don’t believe so, I think the production line stopped in 2005, so 2003-2005 would work but I’m not 100% sure so I would check just to make sure.
Yeah I got s wrecked 06 bought an 03 yesterday with a broke shifter I thought hell I'll change the whole dash if I could
I've had my LG OLED 77" Signature Series on the stand for three years, and now we want to wall mount it and noticed we don't have the two brackets needed to hold the base to the back of the TV. Do you know where I can buy them or are you willing to sell my yours? Thank you!
I would do a eBay search or look around on google bud. Hope that helps.
kzread.info/dash/bejne/eH5o2dKzosSroMY.html
Nice video. If you still have the footage, i would realy like to see how you connected up all those fans.
I linked their controls all together and then daisy chained the power together and hooker the power to a molex adapter if that makes sense!?