Пікірлер

• 
  @rajpathak35518 күн бұрын

  Which software/app you are using

• 
  @matt.autocadbasics8 күн бұрын

  It is called AutoCAD which is a modeling software developed by the company Autodesk.

• 
  @tarigtom116 күн бұрын

  thanks for effort but voice is very low

• 
  @matt.autocadbasics16 күн бұрын

  After reviewing the video it sounds like something happened with the volume while editing....... I wish there was a way to go back and update this but I can't do that without deleting the video. Thank you for the callout. Will make sure future videos don't have this problem.

• 
  @rohullahnayel574522 күн бұрын

  Thank you ❤ It helped solve my problem

• 
  @matt.autocadbasics22 күн бұрын

  Not a problem! I'm happy the video helped!

• 
  @keeleyroberts8623 күн бұрын

  How would I change the circle so that the cylinder is vertical instead of horizontal?

• 
  @matt.autocadbasics23 күн бұрын

  Thanks for the comment/question! Try going to the bottom right hand tool bar where you will find the Isometric Drafting button with an arrow next to it. Click on the arrow and then click the "isoplane Top" button and this should switch you to your desired view. You can also type ISODRAFT into the command bar then click/select "isoplane Top" when it appears in the command bar. Let me know if you have any other questions.

• 
  @Imtiyaz5powerАй бұрын

  Perfect❤

• 
  @visamishra4009Ай бұрын

  Nice

• 
  @matthewblijd4201Ай бұрын

  Smooth explanation and straight to the point. You need more subs dude. Video helped out a ton with projects that I got to do for school.👍💪

• 
  @matt.autocadbasicsАй бұрын

  Thank you, I really appreciate the comment! Good luck with all your projects and if you need any help please reach out!

• 
  @litoboy5Ай бұрын

  Wrong, there is a better dimension

• 
  @matt.autocadbasicsАй бұрын

  Do you mean that there is a better way to dimension in the isometric view? if so, could you explain? It would be helpful for me and/or anyone else watching the video. Thanks!

• 
  @litoboy5Ай бұрын

  @@matt.autocadbasics kzread.info/dash/bejne/po2F0pWIg9bKcs4.html

• 
  @litoboy5Ай бұрын

  @@matt.autocadbasics kzread.info/dash/bejne/po2F0pWIg9bKcs4.html

• 
  @user-uj3se9qj2oАй бұрын

  Thanks

• 
  @matt.autocadbasicsАй бұрын

  No problem!

• 
  @rubenlevi2 ай бұрын

  Comand: PURGE

• 
  @matt.autocadbasics2 ай бұрын

  Thank you for this! you can also access this through the command bar.

• 
  @saikrishnavamsip2652 ай бұрын

  Can you show us how to design dock doors and levelers, please?

• 
  @matt.autocadbasics2 ай бұрын

  Personally, I just use a block that I have saved. Since most dock levelers and doors are similar in spec a pre-drawn block is what is most commonly used. I am working on creating a space where I can place this file for anyone to be able to access when I finish the series. If you are still interested I can make a video that shows how I would draw one!

• 
  @saikrishnavamsip2652 ай бұрын

  @@matt.autocadbasics Thank you so much! Getting the access of your AutoCAD files would help me in practicing well.

• 
  @alexlongoria38932 ай бұрын

  I like your vlog as it is helpful, just to learning the fundamental of useful features of all cad software. I have subscribed!!!!

• 
  @matt.autocadbasics2 ай бұрын

  I'm happy you find it helpful! Thanks for subscribing!

• 
  @AsokaPeiris-cr4xo2 ай бұрын

  Vary easy methode ,thank's

• 
  @matt.autocadbasics2 ай бұрын

  Not a problem! Happy it helped!

• 
  @nomen62 ай бұрын

  How did you get AUTOCAD to Inches? I can't seem to switch it over.

• 
  @matt.autocadbasics2 ай бұрын

  In the lower right hand corner you should see a small rectangular control box that has a small ruler icon in it. When you hover your mouse over it, it should say "UNITS". You will have to go to the right of that small control box and click the drop down arrow. Once you click the arrow you should have 5 different options. I have mine set on "Engineering" which allows me to draw in inches/feet. Let me know if this works!

• 
  @ddesign79203 ай бұрын

  Thanks sir this was very helpful... And straight to point....

• 
  @matt.autocadbasics2 ай бұрын

  No problem! Glad it helped.

• 
  @maryamkhaleeda62943 ай бұрын

  Thank you! I only have autocad LT and struggling to draw hexagon. lifesaver

• 
  @matt.autocadbasics3 ай бұрын

  No problem, If you need help with anything else let me know!

• 
  @vishnukannan37363 ай бұрын

  Thank you for this video!

• 
  @matt.autocadbasics3 ай бұрын

  No problem, glad it helped!

• 
  @jix52813 ай бұрын

  How to enable osnap hatch patterns in mac

• 
  @matt.autocadbasics3 ай бұрын

  Hi, have you tried typing the OSNAPHATCH command in the command bar? Using "1" or "0" will turn this function On and Off. Give it a try and let me know if it doesn't work.

• 
  @SyahrolArch3 ай бұрын

  thx u,,

• 
  @matt.autocadbasics3 ай бұрын

  No problem!

• 
  @LongDistanceCall113 ай бұрын

  thanks man

• 
  @matt.autocadbasics3 ай бұрын

  No problem!

• 
  @Nhatanh04753 ай бұрын

  Why it's so hard to find answer on how to remove a drawing. All I find is remove block.

• 
  @matt.autocadbasics3 ай бұрын

  Sorry that this is difficult to find. I can hopefully make a video that helps witht this problem but will need more information. When you say "remove a drawing" are you referring to and external reference (XREF)? or are you trying to do something else?

• 
  @Renee53 ай бұрын

  i have pickfirst set to 1, and it still makes me select the object. happening in civil 3D for profile view properties

• 
  @matt.autocadbasics3 ай бұрын

  Sorry this didn't work for you. It sounds like this is more common with AutoDesk Civil and that your system variables got switched around. I would recommend making sure your "QAFLAGS" or "AFLAGS" are set up properly. For example my AFLAGS is set to "16" but I also use the regular version of AutoCAD so it might be different within Civil. I would also recommend making sure your "PICKADD" is set up properly. If all else fails you can try resetting your system variables. Here is the link on AutoDesk for this exact problem and how they recommend fixing it. www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/Pickfirst-not-working-in-Civil-3D-2018.html

• 
  @halwhitis35415 ай бұрын

  Deleting Blocks. Very short, sweet, simple. Thanks a ton...

• 
  @matt.autocadbasics5 ай бұрын

  Not a problem, glad it helped!

• 
  @liannedaniellequisado17825 ай бұрын

  thank you! a life saver. all other videos are in older versions of autocad

• 
  @matt.autocadbasics5 ай бұрын

  No problem, glad it helped!

• 
  @tristanaryo6 ай бұрын

  Hi really helpful series, a tutorial for vertical storage layout (with forklift clearance) would be very helpful! Thank you:)

• 
  @matt.autocadbasics6 ай бұрын

  Adding it to the list!

• 
  @muller_5098 ай бұрын

  what website do you recommend to get these blocks?

• 
  @matt.autocadbasics8 ай бұрын

  Check out the link below! They have some good and useful blocks. I created the dock levelers myself based on current dimensions. cad-block.com/

• 
  @jasonvalverde13339 ай бұрын

  thank you! ✌

• 
  @northof604111 ай бұрын

  Hi, have you done a video on Group command and if yes, can me send me a link of that.

• 
  @matt.autocadbasics11 ай бұрын

  Thanks for the comment! I have not created one yet but can add it to the top of the list and make it soon!

• 
  @omarnassar6163 Жыл бұрын

  Thanks bro It worked 👌🏼

• 
  @sudaisawannaatchannel2532 Жыл бұрын

  Good work

• 
  @javierholland1446 Жыл бұрын

  Keep making these types of videos, very nice work!! You really need to look into Promo sm!!!

• 
  @NavidonYoutube Жыл бұрын

  Well done. thank you for your helpfull channel.👍

• 
  @matt.autocadbasics Жыл бұрын

  No problem!

• 
  @nextlc4386 Жыл бұрын

  thx broo