What if you don't have the lugs at the lower edge? Mine just has bolts that move into a recessat the sides.
@stevelane1956 Жыл бұрын
Pity it was so blurred
@matt.2020 Жыл бұрын
AN Espag.
@TomTom-ow6gb2 жыл бұрын
Will it lock again after doing that
@shamskl32452 жыл бұрын
Stop helping burglar s 🤣
@shamskl32452 жыл бұрын
Well done but you helped burglars 🤣👍
@bernie129locksmith2 жыл бұрын
hardly - hes on the inside of the window a burglar is on the outside
@jackjones76152 жыл бұрын
What a great little video 🙂 I've been trying to open a toilet window for over three months without doing any damage so I am happy to say I followed your instructions to the letter and a couple of minutes later opened boom ,,,,, I made my tool out of a plasterers small tool cut it to size and shaped it in my vice.... Thanks buddy Robbie from Huyton Liverpool UK
@Harkiratsingh0133 жыл бұрын
Good job man I opening my window 🪟 from your vedio thank u 👍
@andypavlou71713 жыл бұрын
I have two shoot bolt in a fan light window one of them will not retract when opening the window preventing it from opening, I can't use the method shown I your video,any ideas ? Thank you
@morph6779 Жыл бұрын
Remove the bead and then remove the glass. The frame then will be able to deform as its not rigid just enough for you to disengage the shoot bolt and open it. Replace the shootbolt mech and reinstall the glass and bead.
@dazza861233 жыл бұрын
Thank you. You have just saved me some money. 😀👍🏻
@douglaskelly91734 жыл бұрын
Great that makes my burglaring a lot easier thanks!!
@Zerofightervi4 жыл бұрын
Do you tend to break into houses from the inside?
@alexdelchini28025 жыл бұрын
Top man saved me a fortune keep the videos coming
@thestephen85 жыл бұрын
my window is stuck tried hammering the vice grips and it will not open what will l try next ?
@xjorvis6 жыл бұрын
can this be done with glass still in place?
@michaeldibb6 жыл бұрын
Yes
@rollerbladinggeek55076 жыл бұрын
Where to buy this tool and what is it called?? Scraper only brings up filler tools for plastering
@matthewtaylor46657 жыл бұрын
Use a bent up an bbq skewer, check the length to bend on a similar window... it worked a treat
@johnjelf32567 жыл бұрын
Good video but where do you buy the tall from John thanks
@walksonthebeach36687 жыл бұрын
Hiya mate, Tried you technique, however I've now noticed I have circular cams, Do you know of any trick of opening window with circular cams?
@johnboymcdan67867 жыл бұрын
Thank you very much... my window been locked/stuck closed for couple of years now.. I LOVE KZread
@me_owd_china8 жыл бұрын
Superb! Thank you very much. I made the tool out of a piece of 2mm thick, ruler length piece of mild steel. Bent it slightly here and there until it slid under. Vaseline instead of grease. Worked a treat. Improvisation as opposed to B&Q is key.
@vallavannathan88918 жыл бұрын
thank you so much bro opened my window now... all credit goes to u....
@keithparr5478 жыл бұрын
Tried this doesn't work
@pc12nel8 жыл бұрын
Thanks, gave me an Idea opened my window just in time for spring!
@alexcook96368 жыл бұрын
Also couldn't find a mini pry bar so I made one out of a 'herringbone' strut from Wickes, cost less than £1 and worked perfectly.
@a1harrogate9 жыл бұрын
Worked a treat, thanks
@1972dazbo9 жыл бұрын
nice vid cheers..........another little diy job on my faulty bathroom window to do list.
@stevehall70219 жыл бұрын
Couldn't buy a mini pry bar so I made one from a metal ruler, worked a treat. Thanks for the hint
@moxiemulgrew9 жыл бұрын
In my job I some times come across windows which have the handles spinning round in the espag lock, the square peg in the handle has turned the soft metal in the lock to round.. would love to see a video on opening one off these window's, or any advice from other utubers would be great..
@frank18475 жыл бұрын
@@@@valley boy kzread.info/dash/bejne/qH6q1cqkYMXViLg.html
@goodmanb129 жыл бұрын
It's a mini pry bar
@mars639410 жыл бұрын
Anybody find outt he tool name
@garys13011 жыл бұрын
I could do with one of those tools, I have two windows with this problem ...what is it called?
@zoelsheppard11 жыл бұрын
What tool is that?
@robparkes846811 жыл бұрын
where can I get one of the tools used for opening...I work for a letting agents and am always coming across windows jammed in accommodation . this gadget would be so useful !!!!
Пікірлер
What if you don't have the lugs at the lower edge? Mine just has bolts that move into a recessat the sides.
Pity it was so blurred
AN Espag.
Will it lock again after doing that
Stop helping burglar s 🤣
Well done but you helped burglars 🤣👍
hardly - hes on the inside of the window a burglar is on the outside
What a great little video 🙂 I've been trying to open a toilet window for over three months without doing any damage so I am happy to say I followed your instructions to the letter and a couple of minutes later opened boom ,,,,, I made my tool out of a plasterers small tool cut it to size and shaped it in my vice.... Thanks buddy Robbie from Huyton Liverpool UK
Good job man I opening my window 🪟 from your vedio thank u 👍
I have two shoot bolt in a fan light window one of them will not retract when opening the window preventing it from opening, I can't use the method shown I your video,any ideas ? Thank you
Remove the bead and then remove the glass. The frame then will be able to deform as its not rigid just enough for you to disengage the shoot bolt and open it. Replace the shootbolt mech and reinstall the glass and bead.
Thank you. You have just saved me some money. 😀👍🏻
Great that makes my burglaring a lot easier thanks!!
Do you tend to break into houses from the inside?
Top man saved me a fortune keep the videos coming
my window is stuck tried hammering the vice grips and it will not open what will l try next ?
can this be done with glass still in place?
Yes
Where to buy this tool and what is it called?? Scraper only brings up filler tools for plastering
Use a bent up an bbq skewer, check the length to bend on a similar window... it worked a treat
Good video but where do you buy the tall from John thanks
Hiya mate, Tried you technique, however I've now noticed I have circular cams, Do you know of any trick of opening window with circular cams?
Thank you very much... my window been locked/stuck closed for couple of years now.. I LOVE KZread
Superb! Thank you very much. I made the tool out of a piece of 2mm thick, ruler length piece of mild steel. Bent it slightly here and there until it slid under. Vaseline instead of grease. Worked a treat. Improvisation as opposed to B&Q is key.
thank you so much bro opened my window now... all credit goes to u....
Tried this doesn't work
Thanks, gave me an Idea opened my window just in time for spring!
Also couldn't find a mini pry bar so I made one out of a 'herringbone' strut from Wickes, cost less than £1 and worked perfectly.
Worked a treat, thanks
nice vid cheers..........another little diy job on my faulty bathroom window to do list.
Couldn't buy a mini pry bar so I made one from a metal ruler, worked a treat. Thanks for the hint
In my job I some times come across windows which have the handles spinning round in the espag lock, the square peg in the handle has turned the soft metal in the lock to round.. would love to see a video on opening one off these window's, or any advice from other utubers would be great..
@@@@valley boy kzread.info/dash/bejne/qH6q1cqkYMXViLg.html
It's a mini pry bar
Anybody find outt he tool name
I could do with one of those tools, I have two windows with this problem ...what is it called?
What tool is that?
where can I get one of the tools used for opening...I work for a letting agents and am always coming across windows jammed in accommodation . this gadget would be so useful !!!!