Im confused where did you tap the white wire from? Did you also tap it with the reverse light into the fuse box? Or from the little red wire coming from the rca?
@ThePongmanat4 ай бұрын
Hello Do you have how to replace Door Cap Case Shell USB Rubberright Thank you
@BrunoDeSoto7 ай бұрын
Thank you very much for your very helpful video. It helped me to replace the key on my FJ cruiser’s key fob.
@kennegun7 ай бұрын
Any drone sound at cruising speed ?
@uno38637 ай бұрын
So I'm getting a leak from my oil filter housing, I took it to the shop and was told I need to replace the housing, toyota quoted me an arm and a leg, I found the housing on a Toyota website for 125 which seems more reasonable than getting it from the dealer, my tacoma is a 2012 4L, it has the same housing as yours, anyone here know what the union part number is hopefully it could just be that and not the whole assembly that's leaking, really need help here thank you.
@ericrhodes76488 ай бұрын
You can’t hear him for the extremely annoying music that adds nothing to the video.
@HomelessOnline8 ай бұрын
Looks like my 2005 Tacoma, thank you for this video. I appreciate the explanation of the dowel pin, torque specs, and all the details.
@HomelessOnline8 ай бұрын
Also, I followed your instructions to replace all the pulleys and it now sounds BEAUTIFUL. Thanks again!
@jrpowers6678 ай бұрын
Very helpful. Thank you!
@monzarace9 ай бұрын
when you unscrew and release the whole backside of the camera housing, is the thin long gasket along the edge attatched to the backside, or on the front and top parts of the house? Mine is stuck and I would like not to break it, but to release it properly. I need take it apart as it been under water and stayed 4 years after. Some corrosion, but I managed to get it back to life with top lcd and read screen fully working, orange light as well, all menus working, before taking it apart yesterday, but as I depressed the top shutter button, it went down with a blinking "error 20". Battery out for 20 minutes, and then try again, but the same thing happened then several times, hence I began taking it apart. Any advice is most appreciated. Kind regards.
@jonathancristall915210 ай бұрын
Hey. Can I hire you for a mod in LA?
@studioatlanta11 ай бұрын
My Neewer Canon R6 battery grip broke today at my shoot, so gotta send it back, but I have two Canon batteries in it! ugh...
@studioatlanta11 ай бұрын
Sweet I was #500 subscriber!!
@santiagocardenas466111 ай бұрын
Thank you!
@andrewfiliponi5421 Жыл бұрын
Damm A1 video
@hamzehdoraji1208 Жыл бұрын
Do you have the part number to the oil, stud extension bolt
@deniseandmarkfirestine7443 Жыл бұрын
Have some fun replace the tensioner too, you’ll luv it!!
@justinkitch4495 Жыл бұрын
How do u keep the camera from rotating? Its level when I fix it then one drive makes the physical camera rotate/ tilt. Its flush to the hole though
@sarinsarin7898 Жыл бұрын
thankyou for the video, just found no.2 top right, next to alternator was alittle loose and was hearing squealing noise so jump in the engine and found that one was alittle wobbly. If thats not the problem then atleast i found it.
@mr.rogers5586 Жыл бұрын
Those Japanese fellas must have some small hands.
@kuhraezah5867 Жыл бұрын
How can I clean the viewfinder on the inside? There's a speck of dust on it and it breaks my mind.
@Awoit Жыл бұрын
Any particular reason why you added a washer to the 36173 on top of the insert? Is that standard practice and is it still running good? Awesome content btw!
@kursk810 ай бұрын
Dust cover I believe
@earlalmario9850 Жыл бұрын
Yeah Bro hood vent, did you cut and install a vent or a new hood with a vent off market? Send us the link please?
@sonofliberty92 Жыл бұрын
Just bought a kit with all the parts from ebay. If they check out when they come in, I'm gonna go ahead and tackle this on my Tacoma. Thanks
@CursedClips Жыл бұрын
for 04 4 runner the tension pully is on the right side! forshure take some pics before u do this! easy to fuck up
@sttm1283 Жыл бұрын
whats with condoms on your fingertips?
@mrgizmo7975 Жыл бұрын
Replace the bearings?
@jean-francoisjacob Жыл бұрын
My menu bouton is out of order i don’t know if I start disassembly
@rhess10 Жыл бұрын
I didn't notice any LEDs on the camera. Does it work well at night?
@madxmaxxine65524 ай бұрын
Sorry for the late reply. Changed channel names. There is no LEDs on this model. It goes off the light from your revert back up lamps. It's pretty good with picking up light tbh but I bet the technology is much better now.
@LoneWolfSnowplowing2 жыл бұрын
where do these amateurs come from? using the allen key so it doesn't rotate too far? LMAO. use the allen to lock the tensioner in the loose position to remove/install. derp
@FJthis2 жыл бұрын
Hope you still check this! lol Upon further inspection underneath the bumper, did you drill in between the steel beam and upper rail, where the styrofoam is or did you drill straight into the steel?
@josemarquez862 жыл бұрын
Thank you sir for video!
@veek39822 жыл бұрын
Quicker with same, if not better results using Mother's Mag and Aluminum Polish. Thing is, none of these procedures work on the FJ's sealed beam headlights when the haze is on the inside of the lens.
@khha41132 жыл бұрын
Tried to listen to the noise of your pulleys made but the music was too loud!
@killergerbiljeff2 жыл бұрын
The music is too loud, I can hardly hear you!
@Rashed20302 жыл бұрын
Big Thank you from saudi arabia i see your video and i change the belt using your diagram really thank a lot but why you change the pully there is sound
@madxmaxxine65522 жыл бұрын
There was a scraping noise from start up.. sometimes dust or mud gets in between the washer or bearing even if the bearing isn't bad. To have it all apart, it's easier to change at one time.
@jimmartin94402 жыл бұрын
Why do you have that stupid music playing in the background?
@nathanieleasonbign819702 жыл бұрын
Just found this video. Do you remember the hardware (bolts , screws etc) that was used?
@mikemcdonald96352 жыл бұрын
So after you put the needles back on how do you recalibrate the needle position to be accurate. Mine are like a 1/8 off
@mikemcdonald96352 жыл бұрын
So after you put the needles back on how do you recalibrate the needle position to be accurate. Mine are like a 1/8 off
@mikeq70962 жыл бұрын
Just got my plcc-2 orange to do something similar.. I am having a new cluster made from lacustoms
@sas86toy2 жыл бұрын
What did you do for airbag light on dash since you have aftermarket steering wheel?
@templotony95963 жыл бұрын
Hi what kind of joying stereo you install in your fj?
@jochev57653 жыл бұрын
Great video! I will do mine soon
@jetstream4543 жыл бұрын
Bagless steering wheel 🤦♂️ Red turn signal cluster lights 🤦♂️🤦♂️
@rabiaaoude68393 жыл бұрын
Nice and informative video but for the love of God upload it again without that terrible background music 😫
@FloridaSunMitochondria3 жыл бұрын
Excellent video! Do you know for a 5th Gen 4Runner do you have to remove anything beyond skid plates to gain access?
@AmericanPatriot17783 жыл бұрын
Why don't make glass headlights?
@JoeEngineer3 жыл бұрын
Great video sir. Will be doing this job soon.
@cougar1972xr73 жыл бұрын
music needs to go man
@kennegun3 жыл бұрын
What year is your FJ? And how many miles? I just bought a 2013 trai with 80k miles, belt needs replacing, but not sure about the pulleys
@madxmaxxine65522 жыл бұрын
This is on a 2007 single VVTI. Your 2013 will be a dual VVTI and pretty sure the pulley sizes changed. Head over to rock auto and reference your parts. I would do them all because it's only a little more time rather than having to have it apart but of course your time and money are important
@kennegun2 жыл бұрын
@@madxmaxxine6552 Thanks, I've replaced all pulleys during the belt change. They were all in rough shape. Good idea to change them 7-10 years, depending on use. I have not changed the tensioner. Also done full fluid flush and **breathers for rear diff.
Пікірлер
Im confused where did you tap the white wire from? Did you also tap it with the reverse light into the fuse box? Or from the little red wire coming from the rca?
Hello Do you have how to replace Door Cap Case Shell USB Rubberright Thank you
Thank you very much for your very helpful video. It helped me to replace the key on my FJ cruiser’s key fob.
Any drone sound at cruising speed ?
So I'm getting a leak from my oil filter housing, I took it to the shop and was told I need to replace the housing, toyota quoted me an arm and a leg, I found the housing on a Toyota website for 125 which seems more reasonable than getting it from the dealer, my tacoma is a 2012 4L, it has the same housing as yours, anyone here know what the union part number is hopefully it could just be that and not the whole assembly that's leaking, really need help here thank you.
You can’t hear him for the extremely annoying music that adds nothing to the video.
Looks like my 2005 Tacoma, thank you for this video. I appreciate the explanation of the dowel pin, torque specs, and all the details.
Also, I followed your instructions to replace all the pulleys and it now sounds BEAUTIFUL. Thanks again!
Very helpful. Thank you!
when you unscrew and release the whole backside of the camera housing, is the thin long gasket along the edge attatched to the backside, or on the front and top parts of the house? Mine is stuck and I would like not to break it, but to release it properly. I need take it apart as it been under water and stayed 4 years after. Some corrosion, but I managed to get it back to life with top lcd and read screen fully working, orange light as well, all menus working, before taking it apart yesterday, but as I depressed the top shutter button, it went down with a blinking "error 20". Battery out for 20 minutes, and then try again, but the same thing happened then several times, hence I began taking it apart. Any advice is most appreciated. Kind regards.
Hey. Can I hire you for a mod in LA?
My Neewer Canon R6 battery grip broke today at my shoot, so gotta send it back, but I have two Canon batteries in it! ugh...
Sweet I was #500 subscriber!!
Thank you!
Damm A1 video
Do you have the part number to the oil, stud extension bolt
Have some fun replace the tensioner too, you’ll luv it!!
How do u keep the camera from rotating? Its level when I fix it then one drive makes the physical camera rotate/ tilt. Its flush to the hole though
thankyou for the video, just found no.2 top right, next to alternator was alittle loose and was hearing squealing noise so jump in the engine and found that one was alittle wobbly. If thats not the problem then atleast i found it.
Those Japanese fellas must have some small hands.
How can I clean the viewfinder on the inside? There's a speck of dust on it and it breaks my mind.
Any particular reason why you added a washer to the 36173 on top of the insert? Is that standard practice and is it still running good? Awesome content btw!
Dust cover I believe
Yeah Bro hood vent, did you cut and install a vent or a new hood with a vent off market? Send us the link please?
Just bought a kit with all the parts from ebay. If they check out when they come in, I'm gonna go ahead and tackle this on my Tacoma. Thanks
for 04 4 runner the tension pully is on the right side! forshure take some pics before u do this! easy to fuck up
whats with condoms on your fingertips?
Replace the bearings?
My menu bouton is out of order i don’t know if I start disassembly
I didn't notice any LEDs on the camera. Does it work well at night?
Sorry for the late reply. Changed channel names. There is no LEDs on this model. It goes off the light from your revert back up lamps. It's pretty good with picking up light tbh but I bet the technology is much better now.
where do these amateurs come from? using the allen key so it doesn't rotate too far? LMAO. use the allen to lock the tensioner in the loose position to remove/install. derp
Hope you still check this! lol Upon further inspection underneath the bumper, did you drill in between the steel beam and upper rail, where the styrofoam is or did you drill straight into the steel?
Thank you sir for video!
Quicker with same, if not better results using Mother's Mag and Aluminum Polish. Thing is, none of these procedures work on the FJ's sealed beam headlights when the haze is on the inside of the lens.
Tried to listen to the noise of your pulleys made but the music was too loud!
The music is too loud, I can hardly hear you!
Big Thank you from saudi arabia i see your video and i change the belt using your diagram really thank a lot but why you change the pully there is sound
There was a scraping noise from start up.. sometimes dust or mud gets in between the washer or bearing even if the bearing isn't bad. To have it all apart, it's easier to change at one time.
Why do you have that stupid music playing in the background?
Just found this video. Do you remember the hardware (bolts , screws etc) that was used?
So after you put the needles back on how do you recalibrate the needle position to be accurate. Mine are like a 1/8 off
So after you put the needles back on how do you recalibrate the needle position to be accurate. Mine are like a 1/8 off
Just got my plcc-2 orange to do something similar.. I am having a new cluster made from lacustoms
What did you do for airbag light on dash since you have aftermarket steering wheel?
Hi what kind of joying stereo you install in your fj?
Great video! I will do mine soon
Bagless steering wheel 🤦♂️ Red turn signal cluster lights 🤦♂️🤦♂️
Nice and informative video but for the love of God upload it again without that terrible background music 😫
Excellent video! Do you know for a 5th Gen 4Runner do you have to remove anything beyond skid plates to gain access?
Why don't make glass headlights?
Great video sir. Will be doing this job soon.
music needs to go man
What year is your FJ? And how many miles? I just bought a 2013 trai with 80k miles, belt needs replacing, but not sure about the pulleys
This is on a 2007 single VVTI. Your 2013 will be a dual VVTI and pretty sure the pulley sizes changed. Head over to rock auto and reference your parts. I would do them all because it's only a little more time rather than having to have it apart but of course your time and money are important
@@madxmaxxine6552 Thanks, I've replaced all pulleys during the belt change. They were all in rough shape. Good idea to change them 7-10 years, depending on use. I have not changed the tensioner. Also done full fluid flush and **breathers for rear diff.