Пікірлер

• 
  @danielkarlsson3972 күн бұрын

  Great video but i was thinking about welding penetration, Im not a professional but i weld alot and you do get enough penetration if you can burn through the material just adjust with power and speed right? no need to start/stop. Only time i do this technique is when the material is very thin and you have too much power

• 
  @CreativityUnleashed17 сағат бұрын

  @@danielkarlsson397 you’re right you can have it set just right but when materials are painted or dirty and when you’re gap varies quite a bit, it can be challenging to have it set just right because just right is different for every joint when there’s a lot of variables and I would rather have to stop to let it cool for a second or two, then have to keep changing the machine all the time. If your material is very clean and your route opening is consistent. You can set it just right and not need to stop. And if done right that definitely makes for a better weld.

• 
  @jameschuke41044 күн бұрын

  Trash compressor its gone pumping oil

• 
  @jameschuke41044 күн бұрын

  Your beating a dead horse

• 
  @jameschuke41044 күн бұрын

  The desicant has residue on it it can get buy the filter

• 
  @vi683a8 күн бұрын

  Splitting those Ibeams for Ts... you didnt have severly bent Ts?

• 
  @CreativityUnleashed7 күн бұрын

  @@vi683a no they were quite straight with a few clams in a little, pushing even by hand they straightened right out

• 
  @vi683a7 күн бұрын

  @@CreativityUnleashed I seen many of I beams cut and they just spring apart , violently sometimes.

• 
  @spacecookie109113 күн бұрын

  Poorly installed. 😬

• 
  @user-uf7ov8vp3h15 күн бұрын

  Like is work

• 
  @CreativityUnleashed15 күн бұрын

  @@user-uf7ov8vp3h thanks

• 
  @mib2000017 күн бұрын

  that Milwaukee saw is $220 now

• 
  @CreativityUnleashed15 күн бұрын

  @@mib20000 quite a big difference from what I got it for.

• 
  @JimiSparx-yw3gb23 күн бұрын

  Cheap and effective, my kinda fun!

• 
  @rosanafonseca406126 күн бұрын

  🇧🇷

• 
  @kedarnathmaharana738326 күн бұрын

  Great video.Thanks

• 
  @blakegrunwell544228 күн бұрын

  60%duty cycle at 200a good enough for whom is purchased

• 
  @rickswanberg499529 күн бұрын

  Just found your channel. I realize I am a little late to the party but, would it be a good idea to put a diagonal brace to keep the legs from racking?

• 
  @CreativityUnleashed29 күн бұрын

  @@rickswanberg4995 when I was designing it, I wondered if it was necessary now that I have it built I’ve thrown myself against it quite a few times trying to see if it wiggled at all, and I can’t seem to get it to budge. It seems extremely solid so if I later find it needed, I will definitely add it. I think it will be convenient to be able to store things under it so I was leaving it relatively open. Thank I will look into it more.

• 
  @SM-gp2xhАй бұрын

  Supporting communist China I see.

• 
  @itsmoneyoverbitchesАй бұрын

  I just got mine and it didn’t come with the lift tig gun and made sure I read everything before I ordered it and the only thing that it said that wasn’t included was a spool gun did yours come with the lift tig feature?

• 
  @sarahclaunch1500Ай бұрын

  This is super helpful. Thank you!

• 
  @CreativityUnleashedАй бұрын

  @@sarahclaunch1500 you’re very welcome. I’m glad you found it helpful.

• 
  @g.harrismcgraw8325Ай бұрын

  Looks great! keep up the good work. Looking forward to seeing it completed.

• 
  @CreativityUnleashedАй бұрын

  @@g.harrismcgraw8325 thanks!!!

• 
  @DONTCALLMETHATАй бұрын

  I just purchased the 200TP good 190 shipped. This video gave me the confidence needed to not feel bad about the purchase😂 I'm just a hobbyist so this should do wonders for me

• 
  @ElMoeManАй бұрын

  Great video, thank you sir!

• 
  @ColdBrewsNBBQsАй бұрын

  I have no idea how this works or what it does exactly (not my area of expertise)... I actually stumbled across this by accident, looking for a video on fabricating a water storage tank... But could you possibly route the gas line down underground to an indirect burner in a chamber with a "heat" pipe going from that chamber to the under side of the tank? Then you could use the gas to run the burner, which would heat the tank and eliminate any excess gas being let out into the atmosphere.. And it could run non-stop.. Just a thought.. Ignore if it doesn't make sense.. lol

• 
  @elkountmahmoud4676Ай бұрын

  هل ينفع نعمل شنكل بين جسم التلاجه والباب لأحكام الغلق

• 
  @SnuzzlekinАй бұрын

  Nice idea. Not sure why you keep saying you made, i added, etc. and then seeing some other guy making the thing and filling it. Would have been nice seeing some footage of you making it.

• 
  @JacquesTreehornАй бұрын

  Nice work.

• 
  @13buletpfrАй бұрын

  Aluminum?

• 
  @georgegibson707Ай бұрын

  Excellent project and result, thanks for the video. Can I ask the name of the waterproofing additive ?

• 
  @waymenlawrence2064Ай бұрын

  So did you wash out the muriatic acid with water or did you just drain it out then used the gun to dry it

• 
  @reinaldodavidcorreaАй бұрын

  Which roller did you get?

• 
  @ElioRodriguez-xs2fz2 ай бұрын

  Como regular voltaje y velocidad del alambre para soldar aluminio

• 
  @freon5002 ай бұрын

  Thank you very much. Very impressive build, those hinges are awesome. I'm building one now jib style and since it's not an A frame like your previous model I am planning on using 2 55 gallon barrels of water as counter weight extended out a couple of feet or so. Anyway, thank you very much for making the video and posting it, very helpful..

• 
  @user-dm8my8jw8m2 ай бұрын

  you like Stainless Steel 2mm or 3mm or 4 mm ?

• 
  @user-dm8my8jw8m2 ай бұрын

  ER70S , Or E70T Good medium tank Single Bevel face Hot Capping Matrial 3.5mm 0.2° or 0.3° , Market Las Vegas

• 
  @DiamondW662 ай бұрын

  Nice!

• 
  @wh50272 ай бұрын

  It's ridiculous how easily the entire bolt will come through the frame on push mowers. I unfortunately don't have a welder. I have basic welding knowledge and could easily fix it with one, otherwise, it's almost cheaper to buy another mower if the frame has a hole. I wish there was another option. Still a great video.

• 
  @CreativityUnleashed2 ай бұрын

  It’s quite disappointing the quality of push mowers. There may be a way of bolting another piece of metal to it or riveting something.

• 
  @wh50272 ай бұрын

  @@CreativityUnleashed gonna try JB Weld or Epoxy . Probably won't hold though because of the beating and vibration the wheel takes.

• 
  @aaronf.25762 ай бұрын

  Cold cut chop saws are far superior 😑

• 
  @Shikharg572 ай бұрын

  Amazing how can I get in touch with you.?

• 
  @columbuspalmer8463 ай бұрын

  Great job love the trusses you have done

• 
  @user-dm8my8jw8m3 ай бұрын

  Texas Camp like Tank 50 " Galvanis steel or carbon steel 4mm long 3Meter market africa

• 
  @ambientjars49883 ай бұрын

  Great tip on roughing up edge with a piece of 1” flat while it spins super slow. Had 1 cut (2x2 square 1/4”) that took 30 min because it became glazed and didnt know. Then found your video lol Cheers from Colorado

• 
  @jcbuckeye3 ай бұрын

  Supposed to be light reflective color. Dark color can make the gas expand and it will release it.

• 
  @ziauddin79483 ай бұрын

  good triangle shape truss production with angle pipes # 🇵🇰

• 
  @TheGeekedGizmo3 ай бұрын

  DIY net “Let me just grab my welder.”

• 
  @ziauddin79483 ай бұрын

  👍#🇵🇰

• 
  @KeelanxHacks3 ай бұрын

  Thanks for the video, do you know the Rated Load Amps? I can’t find it anywhere online or in the manual

• 
  @dwmaddawgs3 ай бұрын

  The way of the future. God provided everything we need to live comfortably and cleanly.

• 
  @user-dm8my8jw8m3 ай бұрын

  Send in Camp Texas or Camp africa , Jet Ski like refuel

• 
  @4Champ2and03 ай бұрын

  Dude!! My mom just got back from Dominican Republic and she brought back some of your chocolate 🍫 .. IT IS SOOOOO GOOD!!!!!!!!! I am obsessed.. 🤩 Do you ship to the USA??

• 
  @itmaslanka4 ай бұрын

  You cannot see through the net and that makes a difference .

• 
  @CreativityUnleashed4 ай бұрын

  Not super well, but we had the materials on hand.

• 
  @stuscolnik2 ай бұрын

  Chainlink would be cool

• 
  @stuscolnik2 ай бұрын

  ​@@CreativityUnleashedchainlink

• 
  @luismanuelaguayojr18244 ай бұрын

  What setting for the spool gun for aluminum?

• 
  @CreativityUnleashed4 ай бұрын

  I was trying to spool gun the other day still haven’t got that fully figured out what works best.

• 
  @DIYWoodntYou4 ай бұрын

  This looks like a really cool build! It seems like you’ve thought it through a lot. 🤙🏻

• 
  @CreativityUnleashed4 ай бұрын

  Thanks

• 
  @L0rdEsedess4 ай бұрын

  @Creativity Unleashed --- Are you going to have or make the the Plans Available once you have the prototype completed?

• 
  @CreativityUnleashed4 ай бұрын

  I hope to be able to!!