This is life!... well my crazy upside down go anywhere do anything life. An explorer at heart I love adventure and sometimes get myself in over my head so strap on a helmet and come along for a ride as we get into trouble with Jeeps, Planes, go-karts and heck a good dose of paramotor action too!
Пікірлер
I have to install a new breaker, what do you have to do to do this?
Thanks
yes, but it's no use, consumption remains the same. So a good converter and it's a good thing...
Thanks! Good info.
had my Surron for a month and the brakes on the rear are gone at this point, at least I think so, bc I bled them, sandpapered my brakes, cleaned with isopropyl alcohol, and cleaned and sanded the rotors. The brake levers still feel mushy and when I look at the pistons they barely come out, please let me know, do I need a whole new brake system.
Is it possible to supply only 12V to the router board? I suspect the router board takes 48V as an input from the AC/DC board. There must then be a 48V->12V conversion happening on the router board. The 12V is used to operate the router functions, and the 48V is not used on the router board other than to supply 48V over PoE to the antenna. I know for a fact that you can supply only 12V to the antenna (see Oleg Kutkov) by separating ethernet and power supply. So I'm guessing that it should be possible to forego the AC/DC board, supply only 12V to the router board and to the antenna, and avoid conversion losses.
Using the relay. To be clear on relay # 4+ and # 3- go to battery. # 2+ goes to throttle + and #1- goes to - led ground. Ok On a 3 wire break light, black ground goes to number #3 but where does the red and yellow wires from tail light go on the relay??? Thanks
That did the trick. Thank you sir
more dumb shit click bait
no matter what nothing will ever be done about anything
Top secret.... um yeah but why make it a secret. Lasers are fun.
Just teasing, will do a full video on it
Have you done moths?
Not yet
New cars suck big time!!!
What? You flipped your catamaran and so you decided to get rid of it? You didn't make one video about it since. If you don't want it that bad. I will take it.
Flipped it a few times and just because you don't see videos does not mean I don't enjoy it
Wondering if this will clamp onto a Hobie H rail?
HI. Thank You for this tutorial. So, i have problem with my EM_150/180A. Any way to connect with software. I thik that firmware is corrupted. Could You send me Your on priv, please?
"bo" fang? Is that a regional pronounciation of "ba"? :-)
No, just how I say it
@@AdventureBrad Well I'm going to start saying it that way too!
Very interesting
Give it a try, had some fun results
yamaha has the same "trick"
When I’m pushing my piston in the other comes out so I can’t get them pushed in enough… any advice
Hold the one pushed in then push the other. They are a fiber material and easily damaged so used something soft like wood
Cheers from down under
Thanks, happy trails!
3 years late but is it possible to share the blueprints or how to on this puppy? Thanks for making the video
It's just a mix of designs. You will have to adjust the angle of the box depending on the soil moisture
@@AdventureBrad cool thank you
I have an 03 Accord and a 99 Tacoma. An idiot like me can take care and work on them easily. My mother has a 2022 Forester, and my girlfriend has a 2021 Kia I hate those things. I fear the day when I may be forced to be a modern car.
You’re a bad parent. Have a nice day. Hope your kid doesn’t die.
You're stupid, that's how you lose a kid In my old neighborhood, one of the neighbors had a toddler who was playing with the car while it was running and he managed to pull it out of park and reversed it straight into a highway through the fence down the hill into A. Foley pack highway Tyler did not survive.Neither did the person in the diesel that hit him
Y do find this to be ok
Aww 😂
OMW.....So after work today, I played with my settings. In the never ending quest to find settings that will make my ebike mimick the feel of a CR 125. Welp, I was on page 3 and decided to enable moving vehicle booster. I tried the stock #10 setting and not much. I then set it to 30. That's all I did, and wrote it. It flies. Moving vehicle booster Speed ratio is all I touched so far. it's got to be the secret setting no ones talking about.
Nice will have to check that out. Thanks for sharing
2 of the 6 wires (red and green) have snapped off one of the connectors to the battery due to rattle of the battery how may I go about fixing it, the snap is at the bottom of the wire very close to the plug
i agree i prefer tactile and physical things rather than switches and big screen. physical handbrake, transmission stick, keys. tesla won’t even give you a windscreen wiper stick
Not a car it’s an appliance
new cars are awful
I knew when I got my 2016 F-150 the parking brake button would fail at some point. Not even 8 years old and I'm waiting for a new switch to arrive in the mail. $60 for a plastic switch that probably cost $2 to manufacture and transport. I wish a company would engineer a manual parking brake conversion, there was zero reason to make it electronic.
Shoulda got a ranger
Have you seen the mighty power ranger?
I'm only 23 and I hate new cars too, all the electronic things can go wrong so easily. I'll keep my old landcruiser as long as I can
Let’s be friends. New cars suck.
what size off revit nut?
Yes a pull up handbrake i too like the reassurance and the clicks
That's why I bought a GX 460
karen is a douce for this crap
Say you're getting old without saying you're getting old
im 23 and i agree with this guy
Get a Tesla you'll have none of that BS.
You will have more of this bs you need to touch the screen to change gear
@@darcyhay2657 no, you dont. The new ones know which direction you want to go and most of the time you just hit the brake and then you are ready to go. couldn't be anymore simple
Your getting old bro
Yep
i agree the start/stop and the dial shifter is dumb but cmon man push to start isn’t that bad
New car with 66k miles is a crazy statement
It's a rental bro But new to him He rolls a 90 model square body berb
I dont mind push to start, both my cars have it, the only downside is the lack of an accessory mode (it does have key on engine off, but thats not the same as "accessory") but the parking brake switch i think is dumb as hell, and the dial shifter i also thing is ridiculously stupid. My cars dont have auto start stop, but i also agree that feature is dumb af also Edit: and before yall come crowding with the "boomer" comments, im 27.
My PTS car has an accessory mode, press and holding enters it.
That new parking brake button thing is the worst, literally takes away an important safety feature for zero reason. If for some crazy reason my brakes ever stop working (let’s just say all the brake fluid magically disappears one day), with the old fashioned parking brake I still have a mechanical way to apply brake pressure. It’s not much, it’s not ideal, but it will in fact slow the car down and bring it to a stop, unlike the electronic version. Also, if your battery is dead and you need to push the car, it’s a much bigger hassle with the electronic version than with the mechanical. Just seems like such a dumb design decision that literally serves no purpose. There was absolutely nothing wrong with the old fashioned mechanical hand brake, the new tech adds nothing of any value and makes the car worse in several ways.
@@jart83 I know some cars do, but mine don't. German engineering for you
Hate them too
This guy definitely struggles to send emails
Boomer gets mad at technology HD colorized
Well it is cheap shitty technology