How Can you Get the robot to higher the airstream ? One of my 3 robots does not hoover /suck with the same strength as it usedvanlig to do. Is there a good idea to make machine do a better job?
@gabresler14 күн бұрын
Awesome review thanks! Would you consider the new one without the camera just as good?
@janisyoutube19 күн бұрын
1:00 How do you clean the inside of the brush. Yours only has so little dirt on the edges, but it gets more. Then what?
@-Gunnarsson-25 күн бұрын
So sad that Roborock made a stupid decision to adopt dual rollers permanent on S8 an others. Worse for hard floors. Less efficient/less battery life/louder.. Have you even looked under ? the rollers are tilted up. It sucks from the middle with big forming gaps. And not even close to the floor..
@-Gunnarsson-26 күн бұрын
I always use another vaccum cleaner for the filter 😂
@-Gunnarsson-Ай бұрын
If Roborock made a model without a mop. And kept dual rollers and same power. They would have the best mini robot.
@-Gunnarsson-Ай бұрын
One thing they could improve is transition to carpets. When it runs balanced mode it takes a couple of seconds before it boost up the sucktion. Then some times miss dirt where the carpet line goes.
@mariotraversi479Ай бұрын
Fantastic cleaning and maintenance video! Thank you.
@user-xy2zp8wy6sАй бұрын
First year, no problems. Now the opening to the bin gets clogged every 5 mins. Any ideas? I have done all of the things in this video
@42mtodd2 ай бұрын
My Roborock S 7 recently stopped mopping. Any thoughts?
@gloriataylor-mz2sl2 ай бұрын
I need to know how to charge it up
@sheilamellor35752 ай бұрын
Can it be recharged indoors?
@iamjoshstunell2 ай бұрын
Yes! Any standard USB-C charger plugged into a wall outlet will charge it.
@TheWeatherNutz2 ай бұрын
I don't recommend rinsing the filter. Getting it wet will only cement the fine particles onto the filter media. You should blow it clean with compressed air.
@Bear.and.treats2 ай бұрын
Thanks for the tutorial. One tip from my side: be 100 percent sure that the filter is really dry after rinsing. Inserted mine after 1 day, seemed not to be totally dry and that killed my s7 😂
@iamjoshstunell2 ай бұрын
To see my video on the smaller Bluetti EB3A, click here - kzread.info/dash/bejne/lIVl0sqdZqi3mLw.html
@sshum003 ай бұрын
My dustbin was jammed pack, wow I thought it cleared its content after every run but I guess not!
@hammer-r3 ай бұрын
Why are all eufy 8 pros videos sponsored by eufy? No real independent ones. Having said that, I did order one from Amazon knowing they have a 30 day return if not satisfied to try. The specs seem good.
@allosauruski3 ай бұрын
I need to clean the Air vent. It's full of dust. I cleaned the hole in the dust bin area but how to clean the "inside" part, we can see a grid from the outside were it's written "vibra rise". Thank you
@findood84913 ай бұрын
Mine can be used both bagged and bagless. Installing the damn thing was confusing because instructions showed the bagless system and then instructed to also put the bag in.
@kt677793 ай бұрын
Mr Josh Tunell, Many thanks for your detail video which has been a great help. Can you please help with a problem others may also have faced? Cleaning stuck up hair at the roller's axles is daunting. Because, taking out the grey twist-off cap on the right hand side is tricky. At times, twisting it off doesn't work and when I tried too hard, the black part of the assembly (supposedly attached to the grey twist off cap), separated from the grey cap. When that happens, it's darn difficult to figure out how to reassemble the black piece into the grey twist off cap, and put them back into the roller. THAT IS REALLY MY PROBLEM. After it happened the first time, I ordered another roller kit. It happened again: I was careful in removing the grey twist off cap but it just it wouldn't budge. A little extra force, again it separated out the black part of the assembly. Tried to push the black piece into the twist off cap from the inside - doesn't work, because some notches prevent the hard plastic from the inside to allow the black piece's orientation to go through. I have watched your video frame by frame - at 1:09 there's no way that orientation allows the black plastic piece and the twist off cap can be together. Perhaps, there's some simply way to resolve this problem, please let me know: If while twisting off grey cap the black piece separates, how the heck does one reassemble the roller. My apologies if this is a stupid question. I am at a loss here, any insight will be appreciated. But again, many thanks for a video which has overall been immensely helpful.
@ph00ny14 ай бұрын
For the brush attachment, does it have any sharp edges on the plastic bits?
@ArvindKumarlordoflight4 ай бұрын
Dude's missed the point but yeah, here's the explanation for magsafe part of the title. The cable connector still exists and now the pods come with magnets in them which will help align the case to a magsafe wireless charger. So 'the new' is just some magnets for alignment, coz wireless charging was already possible without magnets.
@samobetter2 ай бұрын
so just to clarify it can still be charged with a wire and magnet
@morixxr4 ай бұрын
What do you think dreame x30 ultra?
@Siblingscare4 ай бұрын
I have roborock s8 can i buy its auto empty dock separately??
@GenericAccountVLR5 ай бұрын
What wonderfully demonstrated and explained instructions! Thank you so much for these; it’s good to be educated on how to maintain this expensive little lifesaver! I love mine - a later model, but anyway. Just awesome. Have a lovely day! 😊
@paulgalloway40425 ай бұрын
What type of light bulbs the Eve needs?
@paggi935 ай бұрын
Thank you so much!
@user-yq9gx5xz8v5 ай бұрын
Great video. I learned a lot on getting started
@blessed79275 ай бұрын
What refrigerator?
@iamjoshstunell5 ай бұрын
Westinghouse WBB3700AG
@grant14375 ай бұрын
Thanks for such a simple demonstration you make this so easy. We love our Q7 and cleaning it for the first time today was so easy. 👍
@davidfields30985 ай бұрын
Hi Josh! 👋
@iamjoshstunell5 ай бұрын
Hey there!
@divinparadis21496 ай бұрын
I just returned my newly bought Dreame L10S Ultra for this. Looks so great !!
@christhomas20606 ай бұрын
Love the lil vac fam
@christhomas20606 ай бұрын
Sounds like it doesn't suck
@TT-sr4mu5 ай бұрын
which means it sucks!!
@bluehannah86966 ай бұрын
This seems to be what I’ve been waiting for. Two problems I have with my Roomba S9 is that is doesn’t pick up hard dog food. The nuggets seem too big and it kicks them around. I’m wondering if the Max does a good job of picking larger things up, also small pieces of paper seem to stymie the S9. Also, along the rug edges debris seems to accumulate and not get picked up very well. It also gets stuck on my heat registers, so does the roborock go over registers without getting stuck? Thanks for this review
@Drivelikeitzstoln6 ай бұрын
I am so impatiently waiting for these to come out!! I need one so badly! Dont have any robot floor cleaner at the moment.
@transammatt4 ай бұрын
You are going to love this one then,I’m saving my money now.
@waqasahmed9394 ай бұрын
Eufy even has a floor washer which seems dead cool
@TS-iw6rx6 ай бұрын
Thankyou for the video
@jamie.andrews6 ай бұрын
Great video. I gotta get to CES next year. Timing is just not great for me. Here is a question. Will the smaller version of the S8 dock that hooks up to your house"s plumbing have detergent injection as well?
@markc36666 ай бұрын
I have cats at home, and my job keeps me away for 2 to 3 days. So the photo album feature is great so I can remotely check on the cats if anything may go wrong.
@benjaminrichter74916 ай бұрын
Wird das neue Gerät wifi 7 besitzen ?
@mattyonkey69426 ай бұрын
Will this be available in the US?
@nammofaves82956 ай бұрын
WOWSER! So many new features! Please do a comparison review ASAP. I think I need one!!!
@gregb15996 ай бұрын
Oh and great another robot vacuum that I will have to take a small mortgage to buy NZ$3k for the current S8, so I guess another $500 on top of the $3k?
@iamjoshstunell6 ай бұрын
From what I've seen the expected US pricing is $1800US, and I think the S8 Pro Ultra came out at $1600USD. So yeah probably around $500AUD/NZD on top of the S8 Pro unfortunately.
@hackztor4 ай бұрын
Problem is not just the price but the how long it will last before breaking. For that price vacuum should be 10+ years but robots only like to last a few years if that.
@gregb15996 ай бұрын
Will it know its a ground level window and not think its part of the room and not have bleeding on the app maps?
@iamjoshstunell6 ай бұрын
I'm not sure about windows to the outside world. My guess is when the robot detects a mirror and the 'room' inside the mirror, and then realises it's overlapping into an already mapped room, it then marks it as a mirror and keeps the map tidy. For windows looking outside, there wouldn't be any overlap into an existing room.
@tiborkalanyos60206 ай бұрын
Do you know the release day for it?
@iamjoshstunell6 ай бұрын
April
@RichardRojasL6 ай бұрын
Matter ?
@iamjoshstunell6 ай бұрын
According to The Verge who are at CES "Roborock’s Marcus Lai told The Verge that support for Matter is only coming to their top-of-the-line S8 MaxV Ultra initially. “We want our most powerful model to be at the forefront of this new and exciting technology,” he said. “We can’t rule out the possibility that more models will support the Matter protocol in the future.”
@javerosales20726 ай бұрын
I didn't know that the s8PU will autodetect the level it's on. I've always been changing the maps on the app manually. Great review, thank you!
@iamjoshstunell6 ай бұрын
Glad to help!
@hongvuong98986 ай бұрын
It’s very helpful thank you! However, my Roborock S8+ now has an “empty trash bin error” I guess the channel between the trash bin and the dock was stuck but I don’t know how to open and clean the channel, could you please help!
Пікірлер
Best product to clean your clean floors 😂
How Can you Get the robot to higher the airstream ? One of my 3 robots does not hoover /suck with the same strength as it usedvanlig to do. Is there a good idea to make machine do a better job?
Awesome review thanks! Would you consider the new one without the camera just as good?
1:00 How do you clean the inside of the brush. Yours only has so little dirt on the edges, but it gets more. Then what?
So sad that Roborock made a stupid decision to adopt dual rollers permanent on S8 an others. Worse for hard floors. Less efficient/less battery life/louder.. Have you even looked under ? the rollers are tilted up. It sucks from the middle with big forming gaps. And not even close to the floor..
I always use another vaccum cleaner for the filter 😂
If Roborock made a model without a mop. And kept dual rollers and same power. They would have the best mini robot.
One thing they could improve is transition to carpets. When it runs balanced mode it takes a couple of seconds before it boost up the sucktion. Then some times miss dirt where the carpet line goes.
Fantastic cleaning and maintenance video! Thank you.
First year, no problems. Now the opening to the bin gets clogged every 5 mins. Any ideas? I have done all of the things in this video
My Roborock S 7 recently stopped mopping. Any thoughts?
I need to know how to charge it up
Can it be recharged indoors?
Yes! Any standard USB-C charger plugged into a wall outlet will charge it.
I don't recommend rinsing the filter. Getting it wet will only cement the fine particles onto the filter media. You should blow it clean with compressed air.
Thanks for the tutorial. One tip from my side: be 100 percent sure that the filter is really dry after rinsing. Inserted mine after 1 day, seemed not to be totally dry and that killed my s7 😂
To see my video on the smaller Bluetti EB3A, click here - kzread.info/dash/bejne/lIVl0sqdZqi3mLw.html
My dustbin was jammed pack, wow I thought it cleared its content after every run but I guess not!
Why are all eufy 8 pros videos sponsored by eufy? No real independent ones. Having said that, I did order one from Amazon knowing they have a 30 day return if not satisfied to try. The specs seem good.
I need to clean the Air vent. It's full of dust. I cleaned the hole in the dust bin area but how to clean the "inside" part, we can see a grid from the outside were it's written "vibra rise". Thank you
Mine can be used both bagged and bagless. Installing the damn thing was confusing because instructions showed the bagless system and then instructed to also put the bag in.
Mr Josh Tunell, Many thanks for your detail video which has been a great help. Can you please help with a problem others may also have faced? Cleaning stuck up hair at the roller's axles is daunting. Because, taking out the grey twist-off cap on the right hand side is tricky. At times, twisting it off doesn't work and when I tried too hard, the black part of the assembly (supposedly attached to the grey twist off cap), separated from the grey cap. When that happens, it's darn difficult to figure out how to reassemble the black piece into the grey twist off cap, and put them back into the roller. THAT IS REALLY MY PROBLEM. After it happened the first time, I ordered another roller kit. It happened again: I was careful in removing the grey twist off cap but it just it wouldn't budge. A little extra force, again it separated out the black part of the assembly. Tried to push the black piece into the twist off cap from the inside - doesn't work, because some notches prevent the hard plastic from the inside to allow the black piece's orientation to go through. I have watched your video frame by frame - at 1:09 there's no way that orientation allows the black plastic piece and the twist off cap can be together. Perhaps, there's some simply way to resolve this problem, please let me know: If while twisting off grey cap the black piece separates, how the heck does one reassemble the roller. My apologies if this is a stupid question. I am at a loss here, any insight will be appreciated. But again, many thanks for a video which has overall been immensely helpful.
For the brush attachment, does it have any sharp edges on the plastic bits?
Dude's missed the point but yeah, here's the explanation for magsafe part of the title. The cable connector still exists and now the pods come with magnets in them which will help align the case to a magsafe wireless charger. So 'the new' is just some magnets for alignment, coz wireless charging was already possible without magnets.
so just to clarify it can still be charged with a wire and magnet
What do you think dreame x30 ultra?
I have roborock s8 can i buy its auto empty dock separately??
What wonderfully demonstrated and explained instructions! Thank you so much for these; it’s good to be educated on how to maintain this expensive little lifesaver! I love mine - a later model, but anyway. Just awesome. Have a lovely day! 😊
What type of light bulbs the Eve needs?
Thank you so much!
Great video. I learned a lot on getting started
What refrigerator?
Westinghouse WBB3700AG
Thanks for such a simple demonstration you make this so easy. We love our Q7 and cleaning it for the first time today was so easy. 👍
Hi Josh! 👋
Hey there!
I just returned my newly bought Dreame L10S Ultra for this. Looks so great !!
Love the lil vac fam
Sounds like it doesn't suck
which means it sucks!!
This seems to be what I’ve been waiting for. Two problems I have with my Roomba S9 is that is doesn’t pick up hard dog food. The nuggets seem too big and it kicks them around. I’m wondering if the Max does a good job of picking larger things up, also small pieces of paper seem to stymie the S9. Also, along the rug edges debris seems to accumulate and not get picked up very well. It also gets stuck on my heat registers, so does the roborock go over registers without getting stuck? Thanks for this review
I am so impatiently waiting for these to come out!! I need one so badly! Dont have any robot floor cleaner at the moment.
You are going to love this one then,I’m saving my money now.
Eufy even has a floor washer which seems dead cool
Thankyou for the video
Great video. I gotta get to CES next year. Timing is just not great for me. Here is a question. Will the smaller version of the S8 dock that hooks up to your house"s plumbing have detergent injection as well?
I have cats at home, and my job keeps me away for 2 to 3 days. So the photo album feature is great so I can remotely check on the cats if anything may go wrong.
Wird das neue Gerät wifi 7 besitzen ?
Will this be available in the US?
WOWSER! So many new features! Please do a comparison review ASAP. I think I need one!!!
Oh and great another robot vacuum that I will have to take a small mortgage to buy NZ$3k for the current S8, so I guess another $500 on top of the $3k?
From what I've seen the expected US pricing is $1800US, and I think the S8 Pro Ultra came out at $1600USD. So yeah probably around $500AUD/NZD on top of the S8 Pro unfortunately.
Problem is not just the price but the how long it will last before breaking. For that price vacuum should be 10+ years but robots only like to last a few years if that.
Will it know its a ground level window and not think its part of the room and not have bleeding on the app maps?
I'm not sure about windows to the outside world. My guess is when the robot detects a mirror and the 'room' inside the mirror, and then realises it's overlapping into an already mapped room, it then marks it as a mirror and keeps the map tidy. For windows looking outside, there wouldn't be any overlap into an existing room.
Do you know the release day for it?
April
Matter ?
According to The Verge who are at CES "Roborock’s Marcus Lai told The Verge that support for Matter is only coming to their top-of-the-line S8 MaxV Ultra initially. “We want our most powerful model to be at the forefront of this new and exciting technology,” he said. “We can’t rule out the possibility that more models will support the Matter protocol in the future.”
I didn't know that the s8PU will autodetect the level it's on. I've always been changing the maps on the app manually. Great review, thank you!
Glad to help!
It’s very helpful thank you! However, my Roborock S8+ now has an “empty trash bin error” I guess the channel between the trash bin and the dock was stuck but I don’t know how to open and clean the channel, could you please help!
How does the roborock offload to the base unit?