I am getting an error message on my 790 pro as soon as I turn my machine on. It’s a green mat (fabric?) under the foot. The mat thickens changes, and the foot goes up and down. What the heck does this mean? The only way to get past it is to turn my machine off and back on an again. If I X out of it, it comes right back.
@TGBTGAlways7 ай бұрын
Love this! Thank you 😊I already have the small ruler but never used it I will be using it all the time now! ❤
@scottydog65399 ай бұрын
And the fold sometimes takes up space and the top fabric does not meet the corner. Rip and redo. Not anymore with this ruler.
@suebean38739 ай бұрын
Thank you. I have those little rulers in two sizes. Love them.
@ss2short Жыл бұрын
Great job Marisol!!!
@binkiewillis8203 Жыл бұрын
How do you go around the quilt corners with this foot? I’ve tried different ways but it’s just not quite right.
@alison5072 Жыл бұрын
Do you know why I’m getting the error message “Embroidery module is updating. Do not remove module.
@rosieraggamuffin Жыл бұрын
THANK YOU Mike!!! I was loathingly about to follow another video that would have me remove the entire case from the machine to get to the whole post to cut off all that thread, when I saw your video! So easy and it only took 5 minutes. Most of that time was in sliding so much thread away! :)
@karlabiasiolli5997 Жыл бұрын
when will be MOnth 1 5$ quilts cutting and sewing be up to view? are you still doing that? thanks
@belindasantos Жыл бұрын
I sure liked this technique of folding the 4 charm squares better than other ones I've seen where you cut out the 4 charm squares into circles. Thanks Jackie for the easier technique!
@wamacgut5 Жыл бұрын
Dagnabit I think I’m going to have to do all 3!!
@loriar1027 Жыл бұрын
This is really helpful! I’ve always been intimidated by paper piecing. Awesome demonstration!
@jamesemanner9671 Жыл бұрын
The root problem is twofold in my opinion. (1) By design the bobbin thread passes over the face of the bobbin with EVERY stitch, and (2) Bernina failed to specify applying an overcoat protection to the silver markings.
@sewspecialquilts Жыл бұрын
They've fixed the problem and all new bobbins work great!
@jamesemanner9671 Жыл бұрын
Then Bernina needs to step up to the plate and replace, free of charge, the defective bobbins.
@catherinemarlin9907 Жыл бұрын
Very helpful! Thanks
@doggods Жыл бұрын
please can you showme how to take apart the covers of bernina 770 qe
@laureeniannucci4878 Жыл бұрын
This is awesome!!!
@marinaabad4995 Жыл бұрын
Where's the video on dropping pressure? How do I gauge the pounds of pressure?
@janisfelsted1172 Жыл бұрын
This looks great. What width did you originally cut your binding? Will it work with narrower bindings?
@sewspecialquilts Жыл бұрын
We cut our binding at 2.5 inches. It would work with narrower bindings however the distance between bi-level and stitch area is about 1/4 inch. You will need a larger width than the 1/4 inch to have the 2 levels to use the foot correctly. Hope that makes sense!
@velvetstitching3631 Жыл бұрын
Thank you - I am interested in purchasing this foot for my new Ballad (which I see you have too). Your tutorial was helpful! Thank you for posting. 😊
@PattymacMakes Жыл бұрын
I love this method for making flying geese, though it feels so wrong until you do the trimming.
@Patty1of4 Жыл бұрын
I am so surprised that this worked! I was dying and I sure didn't think that something this simple could fix my machine! I am blown away! And I am so grateful!
@quiltingembroidery2416 Жыл бұрын
I have Bernina 790 plus. I have 2 issues. 1. Bernina presser foot is not going up and down if use the button. But if use the rod to move with the leg it is working. 2. My black bobbin outer steel cover is cut. Please 🙏 help in this regard. I am from India
@jenniehermanson7721 Жыл бұрын
CLOSE YOUR BLADE!!!!!!
@sewspecialquilts Жыл бұрын
HAHA! I know she was making me so nervous :)
@karlapadbury3142 Жыл бұрын
Hope you are feeling better! Thanks for the videos and sharing some great tips!
@mackenziecorbin3042 Жыл бұрын
How do you put it back on
@conqueringmountscrapmorewi25092 жыл бұрын
Hello! I hope you had a cheerful day! I just got the first chance to sit with my hand quilting and watch your video. I hope you have a carefree week ahead. Thank you for posting your video and sharing your time and talent.
@sewspecialquilts2 жыл бұрын
You are always so sweet with your comments. Thank You!
@tommyromano80662 жыл бұрын
The Stripology ruler is - hands down - the tool I use the most (aside from my rotary cutter). It is well worth the purchase. If you like to get the cutting done quickly, so you can get to the sewing (the fun part), I highly recommend getting it.
@conqueringmountscrapmorewi25092 жыл бұрын
Hello! I just got finished with 2 virtual sew dates and my supper and now can hand quilt while I watch your video. I hope you have a wonderful day. Thank you for posting this video and for your talent.
@toniaowens48652 жыл бұрын
I thought I didn’t need it until I watched your demo! Now I want it!
@mariafoley62272 жыл бұрын
What is the finished size of the quilt?
@sewspecialquilts2 жыл бұрын
72" SQ without borders
@leighnixb2 жыл бұрын
Great tips, thank you!!
@conqueringmountscrapmorewi25092 жыл бұрын
Hi! I hope you are having a happy day! I had a fun day in my sewing room and now I get to sit and hand sew while I watch you. I hope you have a blissful week ahead. Thank you for sharing your video!
@conqueringmountscrapmorewi25092 жыл бұрын
Hello! I hope you have had a peaceful day. I had a busy day in my sewing room too and now I'm sitting with my hand quilting to watch you! I hope you have a great week ahead and I'm looking forward to your next video! Thank you for sharing!
@sandraross22152 жыл бұрын
Thanks so much for the tutorial! I'm ready to get started!!
@sandraross22152 жыл бұрын
Thanks so much! I got my first month block! Clear rules!
@conqueringmountscrapmorewi25092 жыл бұрын
Such a beautiful quilt block! Thank you for posting this video!
@sewfun1962 жыл бұрын
I'm excited with this Advanced Program. Question: 1) What is the finished size of the quilt? 2) Okay to prepay for all 9 months?
@sewspecialquilts2 жыл бұрын
I will ask Laurie this week and will let you know!
@sewspecialquilts2 жыл бұрын
72 inch square and YES on #2
@joycemccoig11602 жыл бұрын
Show me where to sign! Gorgeous layout!
@conqueringmountscrapmorewi25092 жыл бұрын
Such a beautiful quilt! Thanks for sharing!
@ss2short2 жыл бұрын
Oooohhhh fun! can't wait I hope I can choose a different color than my $5 just to add a bit of color to that beautiful quilt design
@sewspecialquilts2 жыл бұрын
You get to choose any color way you like!
@MJMoments2 жыл бұрын
Thanks so much! I am very excited!
@loriar10272 жыл бұрын
Yay! A new class!!
@sandyszilagyi85182 жыл бұрын
Crystal clear explanation. Thank you for the many options.
@bonnieh4032 жыл бұрын
I have always came in too late. I may not be able to attend every month, can I buy the block those months?
Пікірлер
Yes, how do you put it back?
Helpful, thanks.
Thank you for doing these videos again!!!
How about error #2010 on Q20 sit down?
Cool!😎
Where do you get this at a reasonable price ?
You're a lifesaver! Thank you.
I am getting an error message on my 790 pro as soon as I turn my machine on. It’s a green mat (fabric?) under the foot. The mat thickens changes, and the foot goes up and down. What the heck does this mean? The only way to get past it is to turn my machine off and back on an again. If I X out of it, it comes right back.
Love this! Thank you 😊I already have the small ruler but never used it I will be using it all the time now! ❤
And the fold sometimes takes up space and the top fabric does not meet the corner. Rip and redo. Not anymore with this ruler.
Thank you. I have those little rulers in two sizes. Love them.
Great job Marisol!!!
How do you go around the quilt corners with this foot? I’ve tried different ways but it’s just not quite right.
Do you know why I’m getting the error message “Embroidery module is updating. Do not remove module.
THANK YOU Mike!!! I was loathingly about to follow another video that would have me remove the entire case from the machine to get to the whole post to cut off all that thread, when I saw your video! So easy and it only took 5 minutes. Most of that time was in sliding so much thread away! :)
when will be MOnth 1 5$ quilts cutting and sewing be up to view? are you still doing that? thanks
I sure liked this technique of folding the 4 charm squares better than other ones I've seen where you cut out the 4 charm squares into circles. Thanks Jackie for the easier technique!
Dagnabit I think I’m going to have to do all 3!!
This is really helpful! I’ve always been intimidated by paper piecing. Awesome demonstration!
The root problem is twofold in my opinion. (1) By design the bobbin thread passes over the face of the bobbin with EVERY stitch, and (2) Bernina failed to specify applying an overcoat protection to the silver markings.
They've fixed the problem and all new bobbins work great!
Then Bernina needs to step up to the plate and replace, free of charge, the defective bobbins.
Very helpful! Thanks
please can you showme how to take apart the covers of bernina 770 qe
This is awesome!!!
Where's the video on dropping pressure? How do I gauge the pounds of pressure?
This looks great. What width did you originally cut your binding? Will it work with narrower bindings?
We cut our binding at 2.5 inches. It would work with narrower bindings however the distance between bi-level and stitch area is about 1/4 inch. You will need a larger width than the 1/4 inch to have the 2 levels to use the foot correctly. Hope that makes sense!
Thank you - I am interested in purchasing this foot for my new Ballad (which I see you have too). Your tutorial was helpful! Thank you for posting. 😊
I love this method for making flying geese, though it feels so wrong until you do the trimming.
I am so surprised that this worked! I was dying and I sure didn't think that something this simple could fix my machine! I am blown away! And I am so grateful!
I have Bernina 790 plus. I have 2 issues. 1. Bernina presser foot is not going up and down if use the button. But if use the rod to move with the leg it is working. 2. My black bobbin outer steel cover is cut. Please 🙏 help in this regard. I am from India
CLOSE YOUR BLADE!!!!!!
HAHA! I know she was making me so nervous :)
Hope you are feeling better! Thanks for the videos and sharing some great tips!
How do you put it back on
Hello! I hope you had a cheerful day! I just got the first chance to sit with my hand quilting and watch your video. I hope you have a carefree week ahead. Thank you for posting your video and sharing your time and talent.
You are always so sweet with your comments. Thank You!
The Stripology ruler is - hands down - the tool I use the most (aside from my rotary cutter). It is well worth the purchase. If you like to get the cutting done quickly, so you can get to the sewing (the fun part), I highly recommend getting it.
Hello! I just got finished with 2 virtual sew dates and my supper and now can hand quilt while I watch your video. I hope you have a wonderful day. Thank you for posting this video and for your talent.
I thought I didn’t need it until I watched your demo! Now I want it!
What is the finished size of the quilt?
72" SQ without borders
Great tips, thank you!!
Hi! I hope you are having a happy day! I had a fun day in my sewing room and now I get to sit and hand sew while I watch you. I hope you have a blissful week ahead. Thank you for sharing your video!
Hello! I hope you have had a peaceful day. I had a busy day in my sewing room too and now I'm sitting with my hand quilting to watch you! I hope you have a great week ahead and I'm looking forward to your next video! Thank you for sharing!
Thanks so much for the tutorial! I'm ready to get started!!
Thanks so much! I got my first month block! Clear rules!
Such a beautiful quilt block! Thank you for posting this video!
I'm excited with this Advanced Program. Question: 1) What is the finished size of the quilt? 2) Okay to prepay for all 9 months?
I will ask Laurie this week and will let you know!
72 inch square and YES on #2
Show me where to sign! Gorgeous layout!
Such a beautiful quilt! Thanks for sharing!
Oooohhhh fun! can't wait I hope I can choose a different color than my $5 just to add a bit of color to that beautiful quilt design
You get to choose any color way you like!
Thanks so much! I am very excited!
Yay! A new class!!
Crystal clear explanation. Thank you for the many options.
I have always came in too late. I may not be able to attend every month, can I buy the block those months?
Absolutely