Пікірлер

• 
  @Prosperity_pursuers.8 күн бұрын

  Any interior mods like steering wheel and bucket seats? Would be cool to see

• 
  @maybeitssecret890211 күн бұрын

  Can you also do the same, swapping with rear fender and bumper for evox?

• 
  @avoyt941613 күн бұрын

  Hey bro uhm is this a OEM evo hood or is it a look a like evo x hood.

• 
  @shondope13 күн бұрын

  Where does the tip of the bumper bracket sit? I just installed the same bumper and my bracket seems to poke out a little farther than the bottom of the bumper and I feel like it might not be right

• 
  @corsadan878415 күн бұрын

  No SUN NO BUMPER 🙂

• 
  @joshuasutton404316 күн бұрын

  Super nice ride bro and. Color

• 
  @chrissingh123819 күн бұрын

  Great job love what you have done with the car. I recently bought a Ralliart for my son. I do have a Evo 10 for myself but was looking at the rear of my Evo and wanted to put a Evo rear bumper on but noticed my Evo quarter panel is wider than the regular lancer body. How did you get the rear bumper to fit?

• 
  @salvadorpacheco516021 күн бұрын

  About how much did you spend on this transformation ?

• 
  @davideserse632122 күн бұрын

  I’m doing now in 2024🎉

• 
  @EricEgot25 күн бұрын

  So this will fit in a 2017 LANCER ES M/T?

• 
  @p.sarbinov8563Ай бұрын

  Yo bro, what is the engine

• 
  @JRevsАй бұрын

  It’s the 4B11

• 
  @soniccolorschaosАй бұрын

  What was the exhaust change you did? I want something like that on my lancer. If you don't mind me asking.

• 
  @kaspermp.3.495Ай бұрын

  If i were to get one could i leave it completely stock and still put these parts on it? Im fairly new im sure thats a dumb question but i would like to know would if harm the car in anyway causing it to go slower, Is it a good daily, and say for areas with steep hills or mountains i really want one but i definitely don't want another car thats gonna struggle like my 06 accord in places like TN and WV

• 
  @DustinDSMАй бұрын

  So why not just buy the Ralliart? I get the cost deferences but the ralliart came turbo awd and cost less than a evo, but still mad props to the build looks really clean

• 
  @Peach_Live_Ай бұрын

  did everythingg bolt right on ? i have a 2011 gts im building

• 
  @jessevargas38Ай бұрын

  I feel it man people always tell me “why didn’t you get the 3000GT vr-4?” *me happy as hell with my SL

• 
  @pepemodoАй бұрын

  Realmente me encantó lo que hiciste con tu lancer, me encanta este auto, y realmente estoy inspirado a hacer lo que tu, convertir mi lancer en un evo x. Saludos desde Chile.

• 
  @SilverGhost-yu4idАй бұрын

  What’s the point in that for lol dump all that money into something that’ll never be lol 😂

• 
  @AkedaLvl999Ай бұрын

  While it looks nice, a "fake" upbadged Lancer is just embarrassing. It's fine to do it for looks, but an actual Evo is 4WD with an AYC/ACD, not to mention a turbo, your base model is not. This is no different than someone putting Hellcat badges on their Challenger or Type R stickers on a Civic.

• 
  @mc-foxy2 ай бұрын

  Hi, you may not answer bc the video is old but did the two bolts were enough to hold the spoiler for all the years and didn’t moved at higher speeds. I live in Germany so I mean +130mph with higher speeds. 😁 And is the third hole unnecessary or is why did you didn’t drill it? Greetings

• 
  @JRevs2 ай бұрын

  Thanks for your question. Yes the two bolts were enough I haven’t had an issue. The fastest I travel at is around 90. And I didn’t make the third hole, didn’t think it was necessary.

• 
  @mc-foxy2 ай бұрын

  @@JRevs Ok, thanks for the answer. I might add the third hole, because the Tüv (the Organization which inspects all vehicles here, including when I change stuff like spoilers) might have a problem with that. So I better add that. But thanks for the quick answer, it will help me with my Lancer to Evo Project

• 
  @anaairam00712 ай бұрын

  Jamás mostrastes el motor muy mal video 😢

• 
  @AnatolikKuricun2 ай бұрын

  Ахренеть, барабанные тормоза

• 
  @leventdemirci27462 ай бұрын

  hi nice video. whats name the sound 5:32 min ?

• 
  @ririx57222 ай бұрын

  Les éléments de carrosserie de l'evo est compatible avec les autres modèles Lancer ? Comme par exemple ma gs4?

• 
  @HLPOLYWI2 ай бұрын

  So it's basically a riced out Lancer...

• 
  @JRevs2 ай бұрын

  Basically

• 
  @HLPOLYWIАй бұрын

  @@JRevs I would've just saved up for the evo

• 
  @JRevsАй бұрын

  @@HLPOLYWI good for you

• 
  @stephenkyleperrine47362 ай бұрын

  How thick was that? And where do you buy sheets of that. I want to do my front wheel wells and under flap that goes under the bumper and to the front of the bumper. The flap always gets eaten away from.asphault when loose. What store you buy it at

• 
  @EdgeandNikkiNarvaez2 ай бұрын

  If i only have eps issue. Do you think this will solve or should be all electronics? Tyia

• 
  @ALLFORYOUPAGE2 ай бұрын

  Bro has a toyota 86

• 
  @MattKowal-nh4vi2 ай бұрын

  Nice video 😊 what name its a music ??????

• 
  @ArroyoFam_2 ай бұрын

  Sexy as lancer

• 
  @ArroyoFam_2 ай бұрын

  Dope build love it 🔥

• 
  @tylerharry63193 ай бұрын

  Man, as someone that just bought a 350 and is planning on swapping the bumper out, huge thanks. Definitely gonna use that thread tapping method to secure the bumper, looks so much better than having ugly ass bumper ties sticking out. Much appreciated.

• 
  @nmrmkr72883 ай бұрын

  Where are the new video?

• 
  @Caronte3363 ай бұрын

  Con el capot negro se ve hermoso 😅

• 
  @joesegala18563 ай бұрын

  Also an ex Evo FE owner , and a current low mile 2017 se Owner, the non evo gets me there an home faster , the evo X Has to be warmed up. I also prefer the Fwd/4wd setup

• 
  @dcninja92163 ай бұрын

  so is this a rallybacker rear and side skirts with a rocket bunny v3 bumper and front fenders?

• 
  @sebastianosalerno3 ай бұрын

  Super

• 
  @bgoutdoors8024 ай бұрын

  I prefer unweighted. Where my shifter sits is really close to my radio and if I'm not careful can knock it out of gear with the extra weight. So I like unweighted so it's less likely to get knocked out of gear. Don't ask how I found that out🤦‍♂️🤦‍♂️

• 
  @kubapiksa17934 ай бұрын

  Is it still working,?

• 
  @danieldelossantos83434 ай бұрын

  What screws did you use on the sides near the fender? I want to make sure it’s tight and sturdy

• 
  @Joksas4204 ай бұрын

  Hey, i have a question.Did the evo bumpers fit on the stock lancer or did you modify them?

• 
  @nelsonconceicao84424 ай бұрын

  what colour is the wrapping do you have a number of the wrapp?

• 
  @victortruong67894 ай бұрын

  Your thinking is spot on and I fully agree. Buying a standard Lancer and upgrading it to look like an Evo X is so much cheaper, it also means you have a way more practical, reliable, easier to maintain, and much cheaper to run car that still gets the benefits of looking amazing. People always care more about less important stats like BHP and torque rather than the less exciting but much more important stats like MPG, insurance and tax costs, reliability and maintenance. Honestly, I'd much rather have your car than an actual Evo X. The choice is simple: pay tens of thousands more for the car, pay much much more for running costs, have to do more maintenance and have a less reliable car, in exchange for better lap times and bragging rights, or have none of those disadvantages, way more money left in your pocket, just in exchange for not winning races that you barely do anyways. The latter choice is much better and you chose wisely.

• 
  @TutoFree84 ай бұрын

  Link for your wrap please? Looks good😁

• 
  @saebaryo9204 ай бұрын

  😀

• 
  @user-zu6er6kb1h4 ай бұрын

  Яяяяяяяяяяяяяяяалалалалаь

• 
  @user-zu6er6kb1h4 ай бұрын

  Яяяяяяяяяяяяяяяалалалалаь

• 
  @user-zu6er6kb1h4 ай бұрын

  Яяяяяяяяяяяяяяяалалалалаь

• 
  @user-zu6er6kb1h4 ай бұрын

  0:07 0:08 0:09

• 
  @adybest9944 ай бұрын

  Nice video overall,prices are little low in usa vs europe,for example you cant get a hood for under 700 dolars,also you have labor work(in your case,you did all by yourself,but most car guys either do some of it/none of the labor) so you have to also add labor work money(let's say 500-2000 dollars,depending what you've done to the body of the car). At 5:55 sorry to dissapoint,but just in romania we have a few lancers identical with yours ;) I dont even know how many there are in europe.