Пікірлер

• 
  @brice67511 күн бұрын

  Hello, please do you have a link for the long spanner you use to remove the cap ? Thank you

• 
  @brice67511 күн бұрын

  And is it 17 or 19mm please ? 🙏🏻

• 
  @tzon680211 күн бұрын

  @@brice675 I used a standard 19mm open end wrench (spanner). I had to compress the spring a little to get the wrench underneath the lip of the nut.

• 
  @brice67510 күн бұрын

  @@tzon6802 is it not 17mm ? Is what I read

• 
  @colez198915 күн бұрын

  This is the best suspension rebuild video I've ever watched. Thank you so much! Huge help and very informative!

• 
  @darvishhussain860219 күн бұрын

  Thanks for the information 😊

• 
  @chaahatkhan339525 күн бұрын

  next reel on why odo show low oil pressure what is the reason behind

• 
  @seamusblack587626 күн бұрын

  Cool the Indian Dave moss

• 
  @RyksokoАй бұрын

  Awesome video guys. Really helped me out. Although it would have been nice if you showed how to get to the spark plugs, cause it was quite a struggle for me to get there.

• 
  @Keno_psiaАй бұрын

  How often u clean or change air filter'?

• 
  @johnnyjan94793 ай бұрын

  amazing video 👍

• 
  @thezenngine14953 ай бұрын

  Thank you 👍

• 
  @rajeshranganath.k69273 ай бұрын

  Hi sir. Im confused, need some help!! I own a 2016 Rc 390 (Gen 1). 20k-ODO reading. Ridden mostly on good roads ( cautiously on bad roads) I haven't had the requirement to change the seals or oil on front forks since purchase. Now im having lots for frork-dive when im braking. Can you suggest me the solution?? My doubts.....:- 1:- Would just a general fork oil change do the job (motul 4w) ?? ( As 6-year-old oil would have lost it's viscosity, is the front Dive-in because of that??) 2:- Online many people are telling to go for Motul factory line 5w to add extra firmness and tackle the dive in. ( Im worried about the ride quality). 3:- A friend of mine suggested me to get the springs inside the fork changed and go for regular 4w oil. Is that required?? If so would gen 2 springs fit on my gen 1 rc.?? Totally confused.

• 
  @thezenngine14953 ай бұрын

  Please connect with us over a call whatsapp or dm on instagram. all links on our website www.zenngine.in

• 
  @flukemasterbrake21433 ай бұрын

  Are those oem fairings?

• 
  @thezenngine14953 ай бұрын

  yes

• 
  @flukemasterbrake21433 ай бұрын

  How much time did it took for the parts to arrive from yamaha

• 
  @thezenngine14953 ай бұрын

  3 months

• 
  @rajeshranganath.k69273 ай бұрын

  Bro i own a bs3 RC 390. Almost zero rear brake usage. Im not super agressive rider that doesn't mean I'm slow. But i ride it pretty fast. Most of my ride is on highways, country roads, on weekends. My requirement is extremely good stopping power, but im bothered about pre heating issues. What brake pads do you suggest FA or EpFA ??

• 
  @thezenngine14953 ай бұрын

  If you have really sticky rubber, go for EPFA, if not, first put on some good tyres then upgrade to epfa. make sure the brake fluid is good.

• 
  @rajeshranganath.k69273 ай бұрын

  @@thezenngine1495 Any suggestions of a Good garage here in Bangalore. I have to get a beed-job done properly.

• 
  @rajeshranganath.k69273 ай бұрын

  ​@@thezenngine1495 bro reply??

• 
  @thezenngine14953 ай бұрын

  no

• 
  @rajeshranganath.k69273 ай бұрын

  Bro i own a bs3 RC 390. Almost zero rear brake usage. Im not super agressive rider that doesn't mean I'm slow. But i ride it pretty fast. Most of my ride is on highways, country roads, on weekends. My requirement is extremely good stopping power, but im bothered about pre heating issues. Cz it's almost raining throughout the day in the place i live for half of the year. Confused between FA or EpFA ??

• 
  @Legendx_59113 ай бұрын

  Is this comes for KTM RC

• 
  @thezenngine14953 ай бұрын

  Yes.

• 
  @Legendx_59113 ай бұрын

  @@thezenngine1495 and whats option comes for front suspension to upgrade in KTM RC

• 
  @thezenngine14953 ай бұрын

  Please connect with us over whatsapp +91 7777089366 or you can dm us on instagram @thezenngine

• 
  @amith_kmth4 ай бұрын

  I love those beautiful eyes and it roars violently ❤

• 
  @amith_kmth4 ай бұрын

  9:57 Ordering isn't difficult, getting them is difficult. That's true 😂

• 
  @lilicecreme4 ай бұрын

  w video

• 
  @thezenngine14954 ай бұрын

  ok

• 
  @Crashz_pilot4 ай бұрын

  Sar, my one Sar..

• 
  @thezenngine14954 ай бұрын

  valve clearance video next month

• 
  @amitsaxenaofficialvlogs4 ай бұрын

  awesome work

• 
  @thezenngine14954 ай бұрын

  Thanks a lot!

• 
  @Hdaily74 ай бұрын

  Sir i use to have a huge idea of this im still in college after that i was tryingto do the same thing love to see the process just a new subscriber from Mizoram

• 
  @thezenngine14954 ай бұрын

  You can do it! If you need help let us know

• 
  @firstnamelastname-px4mt4 ай бұрын

  waiting for the next vid

• 
  @BOBBY_ONBOARD4 ай бұрын

  Can't wait for motovlog❤

• 
  @thezenngine14954 ай бұрын

  Very soon!

• 
  @umeshgawde92434 ай бұрын

  Many congratulations sir!

• 
  @thezenngine14954 ай бұрын

  Thank you so much 😀

• 
  @aolembapongen46614 ай бұрын

  👌🔥underrated Channel. 🎉

• 
  @thezenngine14954 ай бұрын

  Appreciate that

• 
  @cscs-zr1dn4 ай бұрын

  is it possible to replace the tank even if it's full?

• 
  @zainsayed49134 ай бұрын

  yes

• 
  @cscs-zr1dn4 ай бұрын

  @@zainsayed4913 thanks :) So the only liquid which can come out, is in the line, when you remove the red cap, right?

• 
  @thezenngine14954 ай бұрын

  yes a little will drip out, we recommend you keep a few rags around to collect that fuel.

• 
  @500littlejohn4 ай бұрын

  Hello thanks for the video it is very good. I have just changed the springs on my daytona 675r ohlins forks but i am unsure that i am now getting the correct number of total clicks from minimum to maximum on compression and rebound. I have got 26 clicks on the compression fork and 38 on the rebound fork would you happen to know if this is correct or could you tell me where i can find this information, i have searched all over the internet and cannot find the answer.

• 
  @thezenngine14954 ай бұрын

  30 total clicks on both forks. :)

• 
  @500littlejohn4 ай бұрын

  @@thezenngine1495 thanks, very kind of you to get back to me, I have 26 on one fork and 38 on the other, now I know they should be 30 I'll take the top Caps off again and set them properly, thank you

• 
  @kartick18994 ай бұрын

  Can you share details of toruq wrench that you used

• 
  @thezenngine14954 ай бұрын

  BRITOOL 25-135NM

• 
  @kartick18994 ай бұрын

  Where can i buy this

• 
  @maxsain20044 ай бұрын

  Pretty informative. I have a bit of an issue with my crossplane now. Doesnt hold the idle during cold starts. Its fine while its warmed up. Started this issue out of the blue, after not riding for two weeks. Brand new crank1 battery. What could be the issue? Coolant temp sensor issue? No random fluctuations in the reading. What do suggest?

• 
  @thezenngine14954 ай бұрын

  1- Clean and balance throttle bodies 2- Replace Spark plugs 3- check ignition coils P.S- We are not a fan of Crank1 batteries, too many failures in our experience.

• 
  @maxsain20044 ай бұрын

  @@thezenngine1495 throttle bodies are synced, brand new coils and plugs (OEM)

• 
  @thezenngine14954 ай бұрын

  In that case, send the bike over. we will have a look. :)

• 
  @maxsain20044 ай бұрын

  @@thezenngine1495 Thank you but i'm from bangalore :D

• 
  @thezenngine14954 ай бұрын

  We can arrange transport ;)

• 
  @Crashz_pilot4 ай бұрын

  Hum first hum first

• 
  @Triptonic114 ай бұрын

  I'm the owner of this beauty, after attending & riding few trackdays I can confirm that i loved the new setup and have been enjoying it much more than ever. Thanks Zain for opening up a new path in my moto journey 🍻

• 
  @thezenngine14954 ай бұрын

  Great to hear!

• 
  @ashishmatai4 ай бұрын

  Nicely Explained bro ..lovely ...all doubts cleared

• 
  @thezenngine14954 ай бұрын

  Glad to hear that

• 
  @darvishhussain86025 ай бұрын

  I think still ur faster on the Daytona ❤

• 
  @thezenngine14954 ай бұрын

  these are not push laps. just warmup and testing. I was nowhere close to pushing on this bike.

• 
  @darvishhussain86024 ай бұрын

  @@thezenngine1495 ok got it...

• 
  @VivekNa5 ай бұрын

  Ye kab ka hai?

• 
  @thezenngine14954 ай бұрын

  RACR trackday last august

• 
  @wildwheels_superbikes5 ай бұрын

  💫🔥🔥

• 
  @Nithin12375 ай бұрын

  D390 2013 bought it as used bike. The bike doesn’t show any oil inside the sight glass if the engine is cold. Once started the oil level can be seen, but as the engine cools down the oil disappears and cannot be seen inside the sight glass until started once again? What’s wrong or is it normal?

• 
  @thezenngine14955 ай бұрын

  make sure to check engine oil with the engine hot, switched off and the bike standing upright. if in that case the oil is not seen in the window, you need to top up the oil.

• 
  @babaproductions135 ай бұрын

  How to get in touch with you

• 
  @thezenngine14955 ай бұрын

  www.zenngine.in/Contact_Us

• 
  @AbhayTakoo5 ай бұрын

  Where is Amitabh Bachchan. I was promised Amitabh Bachchan!!!

• 
  @thezenngine14955 ай бұрын

  10:05

• 
  @amith_kmth5 ай бұрын

  Amazing video🙌... I enjoyed and at the same time got to learn few things. Waiting for the next one ❤

• 
  @thezenngine14955 ай бұрын

  Happy to hear that!

• 
  @VivasvanParekh5 ай бұрын

  "Swingarm nahi kaat dena!!" 😂

• 
  @thezenngine14955 ай бұрын

  It was a genuine concern haha

• 
  @sagarkhatri31565 ай бұрын

  6:19 jerry spotted!😂

• 
  @vipulsalian79475 ай бұрын

  Great video very informative I always look at the shop when ever I pass by to see what's going on cool stuff

• 
  @thezenngine14955 ай бұрын

  Thanks 👍

• 
  @donnish65 ай бұрын

  What does it eventually look like

• 
  @thezenngine14955 ай бұрын

  Please subscribe to know

• 
  @Crashz_pilot5 ай бұрын

  “Swingarm nai Kaat dena!” 🤣🤣🤣

• 
  @thezenngine14955 ай бұрын

  haha

• 
  @shashankkamath74125 ай бұрын

  That yes was a Moye Moye moment for Vighnesh

• 
  @thezenngine14955 ай бұрын

  hahahaha yes haha

• 
  @chinmaykar065 ай бұрын

  Hats off to the patience and attention to details.

• 
  @VivasvanParekh5 ай бұрын

  This must have taken some serious patience from you guys! But good job and you got it done..waiting for the next!

• 
  @thezenngine14955 ай бұрын

  It was, lets hope it runs fine and itll be worth it

• 
  @darvishhussain86025 ай бұрын

  Haven't seen anyone doing this before in india Lovely work by Zain bhai

• 
  @thezenngine14955 ай бұрын

  Thank you !

• 
  @anantsingh54925 ай бұрын

  Finally the R1 series! Love this one man! Waiting for more

• 
  @thezenngine14955 ай бұрын

  More to come!

• 
  @sumeetkerketta73115 ай бұрын

  Track length ?

• 
  @thezenngine14954 ай бұрын

  3.7km

• 
  @user-nq4me2md3s5 ай бұрын

  Now that was simple and to the point! I`m going to do the same thing to the Ohlins forks on my Aprilia RSV1000R. Good video!!

• 
  @thezenngine14955 ай бұрын

  Glad it helped