Wow thank you for making this video! My Daughter just used it to unlock her car! 👏🏾😄
@amhfpvАй бұрын
Those light tell you that you need to change brake pads not to add brake oil my friend
@ricardocamarena99522 ай бұрын
Thanks, Otohniel! Suddenly, the VDC OFF light appeared in my Altima 2010, but... thanks to your tip, now is gone.
@ernestoaguilar88782 ай бұрын
Y luego para volver a poner ?
@allen417952 ай бұрын
Thank you so much, I have a 2010 Jetta, and I have a door that's stuck shut
@nirangasarathchandra3803 ай бұрын
hay brother, could you please tell me how to do this in (2006)Mercedes B 180
@thomasdewitt83754 ай бұрын
Left keys in car
@fermata776 ай бұрын
So what part was that ?
@hittz83317 ай бұрын
Thanks Much for your video. Im gonna attempt to change both my upstream sensors... I sprayed them both real good last week...Im HOPING it did a lot to break that rust and should be much easier.
@marciacons92117 ай бұрын
Your video helped me out!! Thank you!
@goldenharmoney7 ай бұрын
usually the vdf and brake light is for brakes or brake pads
@scottykingdavid6 ай бұрын
Correct this is common sense what he is showing.
@scottykingdavid6 ай бұрын
Whae he is showing is common sense.. my vdc is on amd slop and tire pressures after taking it for a oil change and topping off all fluids. They are still on?? So now I'm doing the brake pads next
@tschmidt41967 ай бұрын
Thank you!! This has been making me crazy!! I'm hoping it works for me too!
@davidwick45558 ай бұрын
Worked just as described.
@enetamuno595310 ай бұрын
Didn't work for me Volkswagen Jetta 2009 model. Rear back off side refused to open
@oliviamo44908 ай бұрын
Did you figure yours out? mine is the same I have a 09 too
@enetamuno59538 ай бұрын
@@oliviamo4490 hi Olivia. Unfortunately I never did. I took the door to a dealer, there were talks of breaking the door lock, and a hefty replacement, and repair bill thereafter. I wasn't quite ready for any heavy expenses on the rear back door lock issue. My three other doors are working just fine, the none functional one is on hold, likely for ever. Were you able to find a cost effective solution to your same model as mine, back door lock issue? Are there any trade secrets in that regard you would wish to share?
@ericrojasvelez889111 ай бұрын
Taking the plastic cover crap it make it less harder....
@joserosario7351 Жыл бұрын
Exactly. Should of shown location it was removed. And part name / info
@j.l.5724 Жыл бұрын
What part was that?
@kevinkeim5586 Жыл бұрын
Thankx, u guys bailed me out. I was ready to tear down my car door.
@blazeharwood392 Жыл бұрын
This video is shit🤣 bro doesn’t know what he’s talking about. You had everything turned off/engaged. Flipping it isn’t a “fix” to a problem
@onlife6318 Жыл бұрын
Holyshit
@no_wing_no_prayer Жыл бұрын
My vdc comes on while driving, or comes on shortly after I start my car.
@tylerwyatt54868 ай бұрын
Mine is doing that right now, did you figure it out? If so help would be appreciated
@redhead6351 Жыл бұрын
thanks alot im douing the same thing ill try the drilll again and im trying to the breaker bar
@elizabethodongo24 Жыл бұрын
Thanks for the info !
@otohonielandrade Жыл бұрын
You’re welcome. Please subscribe. it will really help so I can keep making this videos thank you
@cici9632 Жыл бұрын
You did not talk about the white speedometer light!! What is it?
@darnellsmith357 Жыл бұрын
Cruise control on
@1BADOLZ Жыл бұрын
Thank you Sir. 3 lights gone and 2 more to go lol 😆. I would have never figured that out. Thanks for saving me some time. You rock
@rodycivic Жыл бұрын
THANK YOU THANK YOU !! It fixed my problem !!!
@matthewrivers81532 жыл бұрын
What does the white light mean
@JayyStudio2 жыл бұрын
Mines has the abs vdc and the slip light on and everything is fine fluid is good and I don't know if it's the sensor.
@no_wing_no_prayer Жыл бұрын
Me too
@BlackWhite-ru8gm11 ай бұрын
Abs could be the sensor clip behind your rotor. It normally comes on when your car is shutting down and it won’t accelerate.
@hatfieldtaletha32232 жыл бұрын
What's the white light means that still on?
@franklinbeck7792 Жыл бұрын
It’s the brightness for the dash
@truckersagainsttrafficking75502 жыл бұрын
Thank you, excellent video.
@johnsalles82482 жыл бұрын
THANKS BROTHER.
@johnwhite5282 жыл бұрын
What is the brown stuff in the tube, that u apply on all the gaskets?
@otohonielandrade Жыл бұрын
Is water pump gasket sealer it will help a lot. Let it dry a few hours before you turn on the motor. Please subscribe. It will help me to keep making videos like this . Thank you
@eduardogutierrez54742 жыл бұрын
It worked bro thank you
@eduardogutierrez54742 жыл бұрын
Good looking out man it worked I was kinda doubting it was gonna be that but man I’m glad it was just that thanks again bro 💯
@TheChuyDewy2 жыл бұрын
same issue today 07 nissan maxima was scared the cvt was fucked up finally for some reason when doing donuts in an area with no traffic the slip light came on with vdc off and it wouldn't go away till I turned off the car and back on this was probably a warning brake fluid was low brake fluid was low putting the dot 3 brake fluid today thanks
@DavidMartinez-gl2bn2 жыл бұрын
Bro Mine doesn’t stop coming in I’m just driving randomly and all the lights pop up and then I can’t accelerate till I turn it off, no clues what it is
@gabrielquinonez56512 жыл бұрын
@@DavidMartinez-gl2bn did you get a resolution for this brotha? I have same issue
@DavidMartinez-gl2bn2 жыл бұрын
@@gabrielquinonez5651 yes I made sure I cleaned the throttle body one more time and also changed the spark plugs. Make sure it’s very clean!
@DavidMartinez-gl2bn2 жыл бұрын
@@gabrielquinonez5651 Clean the throttle body really well, and clean or replace the maf sensor. I also changed the spark plugs. Fixed it. Good luck !
@kevinfreeman22932 жыл бұрын
Thanks dude! I have a 2009 Nissan Frontier and I replaced the sensor first, that didn't work, sure enough, the brake fluid was low. Thanks again!
@udarpavarota3962 жыл бұрын
It may be a bigger issue. Put some pressure in those tires!
@cassg74992 жыл бұрын
He said he did. He thinks sensor is bad. Pay attention 😅
@TWENTYTWOTIME2 жыл бұрын
Keep making nissan altima videos
@AhRamboRo2 жыл бұрын
Where can I get the part from
@elkbow2 жыл бұрын
Amazon
@AhRamboRo2 жыл бұрын
Wow 6 months ago
@elkbow2 жыл бұрын
@@AhRamboRo lol
@jorgemaldonado10332 жыл бұрын
Thanks bro I have same car and I have same lights on thanks again 👍
@michaelrensel92563 жыл бұрын
So thankful for this video lol! Just did my water pump and the clockwise trick is a life saver not having to line the key up after the impeller was in the housing
@michaelrensel92563 жыл бұрын
Spray the port with air
@solgi293 жыл бұрын
Sounds like all you had to do was reset the motor you had
Пікірлер
Wow thank you for making this video! My Daughter just used it to unlock her car! 👏🏾😄
Those light tell you that you need to change brake pads not to add brake oil my friend
Thanks, Otohniel! Suddenly, the VDC OFF light appeared in my Altima 2010, but... thanks to your tip, now is gone.
Y luego para volver a poner ?
Thank you so much, I have a 2010 Jetta, and I have a door that's stuck shut
hay brother, could you please tell me how to do this in (2006)Mercedes B 180
Left keys in car
So what part was that ?
Thanks Much for your video. Im gonna attempt to change both my upstream sensors... I sprayed them both real good last week...Im HOPING it did a lot to break that rust and should be much easier.
Your video helped me out!! Thank you!
usually the vdf and brake light is for brakes or brake pads
Correct this is common sense what he is showing.
Whae he is showing is common sense.. my vdc is on amd slop and tire pressures after taking it for a oil change and topping off all fluids. They are still on?? So now I'm doing the brake pads next
Thank you!! This has been making me crazy!! I'm hoping it works for me too!
Worked just as described.
Didn't work for me Volkswagen Jetta 2009 model. Rear back off side refused to open
Did you figure yours out? mine is the same I have a 09 too
@@oliviamo4490 hi Olivia. Unfortunately I never did. I took the door to a dealer, there were talks of breaking the door lock, and a hefty replacement, and repair bill thereafter. I wasn't quite ready for any heavy expenses on the rear back door lock issue. My three other doors are working just fine, the none functional one is on hold, likely for ever. Were you able to find a cost effective solution to your same model as mine, back door lock issue? Are there any trade secrets in that regard you would wish to share?
Taking the plastic cover crap it make it less harder....
Exactly. Should of shown location it was removed. And part name / info
What part was that?
Thankx, u guys bailed me out. I was ready to tear down my car door.
This video is shit🤣 bro doesn’t know what he’s talking about. You had everything turned off/engaged. Flipping it isn’t a “fix” to a problem
Holyshit
My vdc comes on while driving, or comes on shortly after I start my car.
Mine is doing that right now, did you figure it out? If so help would be appreciated
thanks alot im douing the same thing ill try the drilll again and im trying to the breaker bar
Thanks for the info !
You’re welcome. Please subscribe. it will really help so I can keep making this videos thank you
You did not talk about the white speedometer light!! What is it?
Cruise control on
Thank you Sir. 3 lights gone and 2 more to go lol 😆. I would have never figured that out. Thanks for saving me some time. You rock
THANK YOU THANK YOU !! It fixed my problem !!!
What does the white light mean
Mines has the abs vdc and the slip light on and everything is fine fluid is good and I don't know if it's the sensor.
Me too
Abs could be the sensor clip behind your rotor. It normally comes on when your car is shutting down and it won’t accelerate.
What's the white light means that still on?
It’s the brightness for the dash
Thank you, excellent video.
THANKS BROTHER.
What is the brown stuff in the tube, that u apply on all the gaskets?
Is water pump gasket sealer it will help a lot. Let it dry a few hours before you turn on the motor. Please subscribe. It will help me to keep making videos like this . Thank you
It worked bro thank you
Good looking out man it worked I was kinda doubting it was gonna be that but man I’m glad it was just that thanks again bro 💯
same issue today 07 nissan maxima was scared the cvt was fucked up finally for some reason when doing donuts in an area with no traffic the slip light came on with vdc off and it wouldn't go away till I turned off the car and back on this was probably a warning brake fluid was low brake fluid was low putting the dot 3 brake fluid today thanks
Bro Mine doesn’t stop coming in I’m just driving randomly and all the lights pop up and then I can’t accelerate till I turn it off, no clues what it is
@@DavidMartinez-gl2bn did you get a resolution for this brotha? I have same issue
@@gabrielquinonez5651 yes I made sure I cleaned the throttle body one more time and also changed the spark plugs. Make sure it’s very clean!
@@gabrielquinonez5651 Clean the throttle body really well, and clean or replace the maf sensor. I also changed the spark plugs. Fixed it. Good luck !
Thanks dude! I have a 2009 Nissan Frontier and I replaced the sensor first, that didn't work, sure enough, the brake fluid was low. Thanks again!
It may be a bigger issue. Put some pressure in those tires!
He said he did. He thinks sensor is bad. Pay attention 😅
Keep making nissan altima videos
Where can I get the part from
Amazon
Wow 6 months ago
@@AhRamboRo lol
Thanks bro I have same car and I have same lights on thanks again 👍
So thankful for this video lol! Just did my water pump and the clockwise trick is a life saver not having to line the key up after the impeller was in the housing
Spray the port with air
Sounds like all you had to do was reset the motor you had
Si me lo puede explicarlo en el español
Si guey listo? Vetelaverga haha....
Thx man ima try this on my caddy