Bro, could you please tell me how I can create pitch angle using global variables. I tried to do it but I can not type Pitch angle on the angle value box of second reference. Intact I couldn't even see the respective angle box in the property manager
@muhammadwaseem-xm2co27 күн бұрын
Hello sir! I have a hexahedral multi-block structured mesh in ICEM CFD, I got some results from this mesh. Now, I have to do a mesh independence test. Please tell me which is the correct way to increase the number of mesh elements: Should I 1) Re-mesh the whole geometry with smaller element size 2) increase the number of nodes in each block. 3) increase the scale factor like 1.2 or 1.3 etc.... Which option should I choose? Please answer my question Thank you!!
@obas0weibo82029 күн бұрын
Am getting points how do i get a plane profile
@CinRizanАй бұрын
Sir please share the part 3 of this video 🙏🙏🙏
@CFD_MechanicАй бұрын
I am not sure I have this video. I will try to find it. You can contact me at +92-321-5096447 (whatsapp only)
@CinRizanАй бұрын
@@CFD_Mechanic part - 3 is in private mode . You can make it Public Sir .
@CFD_MechanicАй бұрын
@@CinRizan I checked I couldnt find it in private mode
@CFD_MechanicАй бұрын
@@CinRizan I dont find it on youtube
@CinRizanАй бұрын
@@CFD_Mechanic so what's should we do now sir . Is there any other way
@CinRizanАй бұрын
Sir please show part - 3 🙏🙏🙏🙏🙏🙏🙏🙏
@CFD_MechanicАй бұрын
Please contact at +92-321-5096447
@CinRizanАй бұрын
Sir please show part - 3 🙏🙏🙏🙏🙏🙏🙏🙏
@joydebmukherjee174Ай бұрын
where is the part 3. How will I move the spherical structure
@-AryPrayogoАй бұрын
Hello sir,can you check your email
@muhammadwaseem-xm2coАй бұрын
Hello sir , please can i have your contact info? I have to ask a question related to my research.
@CFD_MechanicАй бұрын
+92-321-5096447
@muhammadwaseem-xm2coАй бұрын
@@CFD_Mechanic Thank you sir!
@marouaneelalaoui8999Ай бұрын
Hello can you help with a simulation of FSI effet of cavitation on Hydrodynamic journal
@CFD_MechanicАй бұрын
+92-321-5096447
@VinayNandurdikar2 ай бұрын
Great video! I really liked how you explained making calculations faster with the timestep factor and showed the memory needed for 1 million cells in different methods.
@gabriellaraanguiano23202 ай бұрын
Info
@CFD_Mechanic2 ай бұрын
Please check description
@khaihoangcao96062 ай бұрын
Sir, have you simulated the above problem with CFD? I am waiting for its.
hi. can you teach tutorial how to make dissolve gas simulation into liquid like mineral oil.
@CFD_Mechanic2 ай бұрын
i dont have video on that topic
@jacobsss58272 ай бұрын
very helpful
@fauzaniman98462 ай бұрын
Hello sir, is there a way to produce this type of mesh using the default Component System, 'Mesh' software from Ansys?
@CFD_Mechanic2 ай бұрын
yes, but the lenghty process
@ramazankaldrm73712 ай бұрын
Does the computer use ram according to the number of nodes or according to the number of cells?
@CFD_MechanicАй бұрын
Number of cells. In Finite volume method we refer to cells and in Finite differnce method (FDM) we use nodes.
@d3f3kt572 ай бұрын
2:00 is what you are looking for
@abasinfachri46403 ай бұрын
Very good, please continue with these tutorials!
@CFD_Mechanic3 ай бұрын
You can attend online course here : docs.google.com/forms/d/e/1FAIpQLScPjdYOF9T_uM9z0OsYUHeTWXibx5EHRENQVT5-ofDWk90JRQ/viewform?usp=sf_link
@mahhirov43963 ай бұрын
how can ı get full cfd setup video of this application ? modelling dynamic mesh etc...
@CFD_Mechanic3 ай бұрын
It is sliding mesh case and not dynamic meshing. For more details, contact +92-321-5096447 (Whatsapp only)
@CFD_Mechanic3 ай бұрын
Please check descirption for the price and details
@MMO_FOOL3 ай бұрын
It helped but you should not stretch one minute information to 5 minute. This is absolutely horrendous
@CFD_Mechanic3 ай бұрын
Noted.
@majesticmusic39753 ай бұрын
Hello sir, I watched your videos. Please, can you explain the Ansys Workbench watertight geometry workflow meshing and boundary condition settings for the Double Pipe Heat Exchanger..,
@CFD_Mechanic3 ай бұрын
please contact at +92-321-5096447
@m.kharun94943 ай бұрын
Do u have tutorial on this?
@CFD_Mechanic3 ай бұрын
yes
@CFD_Mechanic3 ай бұрын
Please contact at +92-321-5096447
@anubhavkumar52333 ай бұрын
IS THIS COURSE OF AHMED BODY IN ICEM CFD AVAILABLE??
@anubhavkumar52333 ай бұрын
IS THIS COURSE OF AHMED BODY IN ICEM CFD AVAILABLE??
@CFD_Mechanic3 ай бұрын
Meshing in ICEMCFD is also covered
@ilyesbelouddane4 ай бұрын
Pls I need geometric data. If possible. Thanks!
@reicory84084 ай бұрын
Thank you🙏🏽
@mutlucanpolat31874 ай бұрын
Thanks for your efforts brother, you helped me a lot, I love you.
@emmanuelquayson-sackey78804 ай бұрын
Hi please can you share the coordinates for each airfoil
@didarulhasansaharaj43964 ай бұрын
Hello, can I extrude a block as well as twist it to capture a helical blade of darrieus turbine?
@user-qw6tw8pd8k4 ай бұрын
Thank you. You save my life
@enessagnak97644 ай бұрын
thx
@eliasfilho89354 ай бұрын
Hello, I had performed 1440 timesteps from a SI Engine simulation tutorial. During the timesteps, I saved the results using: Calculation Activities -> Automatic Export -> Solution Data Export -> CDAT for CFD-Post. I opened CFD-Post and loaded the results which were available at the clock icon (all 1440 .cdat files were available). However, while creating an animation, I got the following error "ERROR: Size of PackedCStringArray is zero." I realized some timesteps are able to be ploted and some gave this error. Furthermore, I tried to open these problematic timesteps all alone at a different CFD-Post windows, and it was possible to plot them individually. However, I realized these timesteps coincided with dynamic mesh events that excluded regions of the intake and exhaust valves. Is it possible to plot them together using CFD-Post anyway?
@ConsumerCales5 ай бұрын
Great video! I'm strugling to understand how can I redo my earlier sketches. I made a mistake early on on my model and would like to modify one of my earliest sketches but the software lost them. Now my question is that can I find them somewhere and modify them or do I need to start over. Do you know where to see earlier scetches?
@CFD_Mechanic5 ай бұрын
Unfortunantly spaceclaim does not store sketches. It is its strong point and also weak point at the same time. But you can modify geometry from 3D features.
@ConsumerCales5 ай бұрын
@@CFD_Mechanic Thank you for the clarification! I couldn't find the answer directly anywhere else and this explains a lot. 🙏
@faisalmohammad93835 ай бұрын
Thank you sir. I couldn't find anyone better than you in ICME CFD.
@Kishu_tv5 ай бұрын
Hello, nice tutorial. But once i got to the Update Regions i am missing the 3 regions. Why ? Thanks!
@CFD_Mechanic5 ай бұрын
i did not get your point
@md.adamyamin26435 ай бұрын
Really a helpful video! I had performed 1000 timesteps of simulation while extracting the .cdat files. Later I performed another 2000 timesteps. Now when I load the 3000th .cdat file, it only shows the timesteps from 1001 to 3000. How do I create animation in single video from 1 to 3000 timestep? Kindly help with this.
@CFD_Mechanic5 ай бұрын
cdat files from 1-1000 should be in same folder
@nadeemkhouri40545 ай бұрын
did you mean gamma is 0 and not R at timestamp 18:25? because how can the radius of the pipe be 0 at the centreline.
@CFD_Mechanic5 ай бұрын
I meant r = 0.
@sfzdgxfhycgjuvkyihopu5 ай бұрын
hello! Thanks for your videos. tell me, I do not understand ansis and aerodynamics, but I need to learn how to calculate and compare the characteristics of aircraft (UAV) which tk of your courses do I need to purchase?
@sfzdgxfhycgjuvkyihopu5 ай бұрын
@CFD_Mechanic
@YATABEEZEESSS5 ай бұрын
Excuse me, how to create very big enclosure. I have created a very big enclosure (larger than 1000 meters) and it disappear.
@cadinsider9645 ай бұрын
can we use this enclosure technique to create an enclosure for a wind turbine with sliding mesh zone and fixed meshed zone to avoid Boolean etc?
@CFD_Mechanic5 ай бұрын
no
@DelfinoGarza775 ай бұрын
These are lies. Magic is the reason.
@CFD_Mechanic5 ай бұрын
Looks like you are drunk and wanted to comment on some other video
@muhammedcetintas60775 ай бұрын
Can you share setup settings for us in video or at here?
@CFD_Mechanic5 ай бұрын
This is paid training. If interested contact at +92-321-5096447. Package contains ppt file, solved files, mesh file, geometry, and training videos. Cost is only 150 USD
Пікірлер
my curve is not smooth how to make it smooth ?
it may be the display issue only.
Love you Dada 🙏😇
Bro, could you please tell me how I can create pitch angle using global variables. I tried to do it but I can not type Pitch angle on the angle value box of second reference. Intact I couldn't even see the respective angle box in the property manager
Hello sir! I have a hexahedral multi-block structured mesh in ICEM CFD, I got some results from this mesh. Now, I have to do a mesh independence test. Please tell me which is the correct way to increase the number of mesh elements: Should I 1) Re-mesh the whole geometry with smaller element size 2) increase the number of nodes in each block. 3) increase the scale factor like 1.2 or 1.3 etc.... Which option should I choose? Please answer my question Thank you!!
Am getting points how do i get a plane profile
Sir please share the part 3 of this video 🙏🙏🙏
I am not sure I have this video. I will try to find it. You can contact me at +92-321-5096447 (whatsapp only)
@@CFD_Mechanic part - 3 is in private mode . You can make it Public Sir .
@@CinRizan I checked I couldnt find it in private mode
@@CinRizan I dont find it on youtube
@@CFD_Mechanic so what's should we do now sir . Is there any other way
Sir please show part - 3 🙏🙏🙏🙏🙏🙏🙏🙏
Please contact at +92-321-5096447
Sir please show part - 3 🙏🙏🙏🙏🙏🙏🙏🙏
where is the part 3. How will I move the spherical structure
Hello sir,can you check your email
Hello sir , please can i have your contact info? I have to ask a question related to my research.
+92-321-5096447
@@CFD_Mechanic Thank you sir!
Hello can you help with a simulation of FSI effet of cavitation on Hydrodynamic journal
+92-321-5096447
Great video! I really liked how you explained making calculations faster with the timestep factor and showed the memory needed for 1 million cells in different methods.
Info
Please check description
Sir, have you simulated the above problem with CFD? I am waiting for its.
no
How can I get this full video access?
docs.google.com/forms/d/e/1FAIpQLSfsNlxMIAcqqAr_bIOZW-2SKwdkA5SUGkjh47zmkitYLoMtvQ/viewform?usp=sf_link
hi. can you teach tutorial how to make dissolve gas simulation into liquid like mineral oil.
i dont have video on that topic
very helpful
Hello sir, is there a way to produce this type of mesh using the default Component System, 'Mesh' software from Ansys?
yes, but the lenghty process
Does the computer use ram according to the number of nodes or according to the number of cells?
Number of cells. In Finite volume method we refer to cells and in Finite differnce method (FDM) we use nodes.
2:00 is what you are looking for
Very good, please continue with these tutorials!
You can attend online course here : docs.google.com/forms/d/e/1FAIpQLScPjdYOF9T_uM9z0OsYUHeTWXibx5EHRENQVT5-ofDWk90JRQ/viewform?usp=sf_link
how can ı get full cfd setup video of this application ? modelling dynamic mesh etc...
It is sliding mesh case and not dynamic meshing. For more details, contact +92-321-5096447 (Whatsapp only)
Please check descirption for the price and details
It helped but you should not stretch one minute information to 5 minute. This is absolutely horrendous
Noted.
Hello sir, I watched your videos. Please, can you explain the Ansys Workbench watertight geometry workflow meshing and boundary condition settings for the Double Pipe Heat Exchanger..,
please contact at +92-321-5096447
Do u have tutorial on this?
yes
Please contact at +92-321-5096447
IS THIS COURSE OF AHMED BODY IN ICEM CFD AVAILABLE??
IS THIS COURSE OF AHMED BODY IN ICEM CFD AVAILABLE??
Meshing in ICEMCFD is also covered
Pls I need geometric data. If possible. Thanks!
Thank you🙏🏽
Thanks for your efforts brother, you helped me a lot, I love you.
Hi please can you share the coordinates for each airfoil
Hello, can I extrude a block as well as twist it to capture a helical blade of darrieus turbine?
Thank you. You save my life
thx
Hello, I had performed 1440 timesteps from a SI Engine simulation tutorial. During the timesteps, I saved the results using: Calculation Activities -> Automatic Export -> Solution Data Export -> CDAT for CFD-Post. I opened CFD-Post and loaded the results which were available at the clock icon (all 1440 .cdat files were available). However, while creating an animation, I got the following error "ERROR: Size of PackedCStringArray is zero." I realized some timesteps are able to be ploted and some gave this error. Furthermore, I tried to open these problematic timesteps all alone at a different CFD-Post windows, and it was possible to plot them individually. However, I realized these timesteps coincided with dynamic mesh events that excluded regions of the intake and exhaust valves. Is it possible to plot them together using CFD-Post anyway?
Great video! I'm strugling to understand how can I redo my earlier sketches. I made a mistake early on on my model and would like to modify one of my earliest sketches but the software lost them. Now my question is that can I find them somewhere and modify them or do I need to start over. Do you know where to see earlier scetches?
Unfortunantly spaceclaim does not store sketches. It is its strong point and also weak point at the same time. But you can modify geometry from 3D features.
@@CFD_Mechanic Thank you for the clarification! I couldn't find the answer directly anywhere else and this explains a lot. 🙏
Thank you sir. I couldn't find anyone better than you in ICME CFD.
Hello, nice tutorial. But once i got to the Update Regions i am missing the 3 regions. Why ? Thanks!
i did not get your point
Really a helpful video! I had performed 1000 timesteps of simulation while extracting the .cdat files. Later I performed another 2000 timesteps. Now when I load the 3000th .cdat file, it only shows the timesteps from 1001 to 3000. How do I create animation in single video from 1 to 3000 timestep? Kindly help with this.
cdat files from 1-1000 should be in same folder
did you mean gamma is 0 and not R at timestamp 18:25? because how can the radius of the pipe be 0 at the centreline.
I meant r = 0.
hello! Thanks for your videos. tell me, I do not understand ansis and aerodynamics, but I need to learn how to calculate and compare the characteristics of aircraft (UAV) which tk of your courses do I need to purchase?
@CFD_Mechanic
Excuse me, how to create very big enclosure. I have created a very big enclosure (larger than 1000 meters) and it disappear.
can we use this enclosure technique to create an enclosure for a wind turbine with sliding mesh zone and fixed meshed zone to avoid Boolean etc?
no
These are lies. Magic is the reason.
Looks like you are drunk and wanted to comment on some other video
Can you share setup settings for us in video or at here?
This is paid training. If interested contact at +92-321-5096447. Package contains ppt file, solved files, mesh file, geometry, and training videos. Cost is only 150 USD