Nice video but man ya got balls being on Lake Erie in a small craft
@Shlokislive4 ай бұрын
imagine this is your boyfriends nipple and you sucked it
@Moondog93228 ай бұрын
I finally went over my planer boards today and adjusted all to these same specs. Been wanting to do this for awhile....they're only 3 years old. lol Thanks, Ryan.
@jeffeigner3880 Жыл бұрын
Oh so your release is the back clip? And it will snap off with a quick jerk? And will the planer drop to the back of the boat without tangling other lines?
@rajkumarbhale6096 Жыл бұрын
Love you dear mast zakas tamatar jaisa hai lelin dud ana chaiye
@rajkumarbhale6096 Жыл бұрын
Dud ata kya dud pilayar
@jtaylor6399 Жыл бұрын
i have this unit from a used lund. I haven't messed with it much but can't seem to find why my sonar only shows black and white fish logos and not the arch with color. any suggestions? yes same model.
@rbud1080 Жыл бұрын
Change the palette. It will be one of the options in the sonar menu.
@jtaylor6399 Жыл бұрын
@@rbud1080 thank you sir
@cdweddle Жыл бұрын
So how do you connect it to the Lowrance I assume there is a video in on your model?
@rbud1080 Жыл бұрын
So on the older carbon or gen 3 units, Lowrance has a video adapter power cable, the Aqua Vu plugs right into that. On the newer live units, a simple HDMI goes right from the Aqua Vu to the Lowrance unit.
@stephenkendall6964 Жыл бұрын
So a fish is on and you begin really it in, when do you take the planer board off thr line?
@michaelchilders2562 жыл бұрын
Once u find your depth to troll using the trolling fine, how do u set the cable depth to stay in place to fish hands free? I know the fishing line is clipped to the cable but what holds the cable in position along side of the boat to concentrate on the monitor.
@Dmnazdaq2 жыл бұрын
Nicely done, Ryan. I have 4 kits coming Weds to be installed.
@jamesalbert11622 жыл бұрын
I have a 3in1 transducer. do not see that on transducer selections on unit
@striperfishingguy2 жыл бұрын
Thank you for the great video!
@MrRaja2 жыл бұрын
Thanks for sharing.
@walterdowns99783 жыл бұрын
So when I am snorkeling I can see about 15 feet down in a clearish lake what I would like to know is if you.put the fish camera just below the surface facing down how far would you be able to see
@rharan13 жыл бұрын
Very informative video. Thanks a bunch
@grr71963 жыл бұрын
Lowrance has the worst costumer service on the market your good till you have trouble with the unit that is the problem
@castingoutfear81973 жыл бұрын
What mount did you have on right side of dash?
@rbud10803 жыл бұрын
Cisco
@sufyan2433 жыл бұрын
What this doing here? Should be on pornhub
@Moondog93223 жыл бұрын
Hey, Ryan....do you use the OR18 in the front when using braid and mono?
@rbud10803 жыл бұрын
Yes, you have to use the OR18 with braid, but I use it with mono as well!
@Moondog93223 жыл бұрын
@@rbud1080 Thanks, Capt.
@umienh9163 жыл бұрын
How did u fish the wire up to the dash???
@gerardhaubert82104 жыл бұрын
Is this product still available? If not , someone should try offering it again
@Moondog93224 жыл бұрын
Hey, Ryan. Handy tip! I talked to you at Vic's during Walleye Wisdom. See you on the water.
@Evans.Adzmakis.Medium4 жыл бұрын
Λουγκρίτσα κρυφή αλλά έχει υπέροχα ώριμα φρούτα ζουμερά αντρικά βυζόμπαλα και τεράστιο άτριχο καλά δουλεμένο κωλο. Έχυσα..
@adventurefishing31904 жыл бұрын
Whats the top speed of these boats?
@diadepesca45104 жыл бұрын
What else do i need besides the aqua vu camera? You mentioned a module, i look it up. It shows me cameras with monitors. Can you provide a link of the right one? Thanks!!
@diadepesca45104 жыл бұрын
For the camera, i just need the camera and the modulr that comes with it right? No internet required? Thanks
@jamesgough39385 жыл бұрын
Lucky crawfish....until he gets bbq'ed, of course. :)
@steelheaddream47555 жыл бұрын
I'm about sea sick watching you
@bradyoakland92875 жыл бұрын
How do you get the menu on the right side of the screen to disappear?
@Moondog93225 жыл бұрын
Great job, Ryan. See you at Vic's.
@Moondog93225 жыл бұрын
Also wanted to ask how you deal with the livewell lid on a Fishmaster 196, which doesn't stay closed when moving across the lake and bloody water splashes out when waves are a bit rough. Any suggestions? Thanks.
@taneishacole-smith76185 жыл бұрын
Go to crop your stuff in the 🌍
@AnascoNice6 жыл бұрын
Great job dude. I've been stocked for a whole day trying to run that freaking wire!!
@jsboutdoors6 жыл бұрын
Great video, thanks for posting
@davidroberie65726 жыл бұрын
I just traded my Gen 2 for a Gen 3. Do you need a different transducer to get the 3D feature on structure scan? Also, my unit is not recognizing my mini SD card that I have in the card reader. Do you have any idea why it would do that? Also, I have an underwater AquaView camera . How does it hook up to the HDS unit? Thanks. Great video.
@rbud10806 жыл бұрын
David - to use the 3D feature, you need to have the 3D transducer and module. It connects to the unit via the yellow ethernet connector. I'm not sure why it wouldn't be recognizing your SD card, is the software up to date? What are you using the card for, mapping? The Aqua Vu Mulit Vu connects to your unit via a Lowrance video adapter power cable... Your aqua vu camera has to have a RCA Video Output, I'm not sure which camera you have, but I use the Multi Vu, which has RCA video output.
@davidroberie65726 жыл бұрын
I spoke to Lowrance and they said the largest mini sd card I can use is a 32 gb. I had a 64 gb in it. So I ordered a 32 gb card and will try it next week. I have the AV Micro 5 plus, a very small unit. It probably does not have those features that you mentioned. Thanks.
@loadnlock3576 жыл бұрын
I just wish hey weren't so expensive. $33 for the board and another $20 or so for the tattle flag. $50 for a piece of plastic and packing foam...
@TheMcChesneys6 жыл бұрын
The only other thing I would suggest is not to put the screw eye in the top of the back the board. Instead drill a new hole near the bottom of the rear of the board. This fixes the issue with the rear of the planner board to sink and the nose to ride to high in the water. The difference is significant. This does not effect the tattle flag action at all. :P. Nice video.
@rbud10806 жыл бұрын
Frank Mcchesney new video coming soon with updated ways to rig boards!
@Backyardprojectguy6 жыл бұрын
I like your Video....because you enjoy fishing you might like "Herring Running up river to spawn" It has some underwater shots....kzread.info/dash/bejne/aZid1M6Qhc-qc7Q.html If you like can you subscribe, I'm trying to get to 1k subs ..Thanks for sharing..
@jerrestrickland57586 жыл бұрын
B
@larryclifton2886 жыл бұрын
hey can u help me just got the gen 3 9 and 7 connected gonna buy a card from navionactis getting the east what i need to know is how to set my unit to take me from dock wherever i wanna go and it take me back not get lost lol now i plan on buting card to record on can u recomond one pleae thanks
@rbud10806 жыл бұрын
larry clifton, any micro sd card will work to record, simple way is turn your trails on, then you can always follow your trail home. You can also record a route, see how to do that in your manual. For simple stuff like this, your unit should have enough internal storage that you don’t even need a sd card. I record on 16g micro sd cards for uploading and make genesis maps. I hope this helps!
@oldchickenranch6 жыл бұрын
Hey I'm new to Lowrance can I use this for land navigation? Specifically off road Baja Ca. Mexico?
@rbud10806 жыл бұрын
Doug Kaul, it would mark a track and you would be able to make usable waypoints, but there would be very limited land navigation features. There are better options for land navigation...
@mainebassin81766 жыл бұрын
Can't decide wiether to get a hds 9 or a helix 10
@rbud10806 жыл бұрын
HDS 9! Lowrance user interface and sonar readings are SOOOOOOOOOO nice!
@uncleelsicko83666 жыл бұрын
hey man great job on customizing rig for trolling, did not have a clue but you made plain instructional video, thanks
@keithgladstone18627 жыл бұрын
Why bother doing a tutorial if the images are blurry
@artdealba95877 жыл бұрын
it jacks up the tranducer when left on longer than five minutes out of water bud
@2414ah7 жыл бұрын
Way better than the instructions that came with the planer. Thank you, Sir!
@brocko867 жыл бұрын
Just wanting to know do you just have the sonar and the 3d structure scan transducers? Or do you have the structures can transducer also?
@blindbasser8 жыл бұрын
yea tried to download updates ,,,,, yea that works out fine ,,,,,,,,,,,,,, not ,,,,,,
@GALIZAPIKAROBALIZA048 жыл бұрын
Hello friend nice video congratulations
@fishonfish18 жыл бұрын
How do you troll in rivers? With or against the current?
Пікірлер
Nice video but man ya got balls being on Lake Erie in a small craft
imagine this is your boyfriends nipple and you sucked it
I finally went over my planer boards today and adjusted all to these same specs. Been wanting to do this for awhile....they're only 3 years old. lol Thanks, Ryan.
Oh so your release is the back clip? And it will snap off with a quick jerk? And will the planer drop to the back of the boat without tangling other lines?
Love you dear mast zakas tamatar jaisa hai lelin dud ana chaiye
Dud ata kya dud pilayar
i have this unit from a used lund. I haven't messed with it much but can't seem to find why my sonar only shows black and white fish logos and not the arch with color. any suggestions? yes same model.
Change the palette. It will be one of the options in the sonar menu.
@@rbud1080 thank you sir
So how do you connect it to the Lowrance I assume there is a video in on your model?
So on the older carbon or gen 3 units, Lowrance has a video adapter power cable, the Aqua Vu plugs right into that. On the newer live units, a simple HDMI goes right from the Aqua Vu to the Lowrance unit.
So a fish is on and you begin really it in, when do you take the planer board off thr line?
Once u find your depth to troll using the trolling fine, how do u set the cable depth to stay in place to fish hands free? I know the fishing line is clipped to the cable but what holds the cable in position along side of the boat to concentrate on the monitor.
Nicely done, Ryan. I have 4 kits coming Weds to be installed.
I have a 3in1 transducer. do not see that on transducer selections on unit
Thank you for the great video!
Thanks for sharing.
So when I am snorkeling I can see about 15 feet down in a clearish lake what I would like to know is if you.put the fish camera just below the surface facing down how far would you be able to see
Very informative video. Thanks a bunch
Lowrance has the worst costumer service on the market your good till you have trouble with the unit that is the problem
What mount did you have on right side of dash?
Cisco
What this doing here? Should be on pornhub
Hey, Ryan....do you use the OR18 in the front when using braid and mono?
Yes, you have to use the OR18 with braid, but I use it with mono as well!
@@rbud1080 Thanks, Capt.
How did u fish the wire up to the dash???
Is this product still available? If not , someone should try offering it again
Hey, Ryan. Handy tip! I talked to you at Vic's during Walleye Wisdom. See you on the water.
Λουγκρίτσα κρυφή αλλά έχει υπέροχα ώριμα φρούτα ζουμερά αντρικά βυζόμπαλα και τεράστιο άτριχο καλά δουλεμένο κωλο. Έχυσα..
Whats the top speed of these boats?
What else do i need besides the aqua vu camera? You mentioned a module, i look it up. It shows me cameras with monitors. Can you provide a link of the right one? Thanks!!
For the camera, i just need the camera and the modulr that comes with it right? No internet required? Thanks
Lucky crawfish....until he gets bbq'ed, of course. :)
I'm about sea sick watching you
How do you get the menu on the right side of the screen to disappear?
Great job, Ryan. See you at Vic's.
Also wanted to ask how you deal with the livewell lid on a Fishmaster 196, which doesn't stay closed when moving across the lake and bloody water splashes out when waves are a bit rough. Any suggestions? Thanks.
Go to crop your stuff in the 🌍
Great job dude. I've been stocked for a whole day trying to run that freaking wire!!
Great video, thanks for posting
I just traded my Gen 2 for a Gen 3. Do you need a different transducer to get the 3D feature on structure scan? Also, my unit is not recognizing my mini SD card that I have in the card reader. Do you have any idea why it would do that? Also, I have an underwater AquaView camera . How does it hook up to the HDS unit? Thanks. Great video.
David - to use the 3D feature, you need to have the 3D transducer and module. It connects to the unit via the yellow ethernet connector. I'm not sure why it wouldn't be recognizing your SD card, is the software up to date? What are you using the card for, mapping? The Aqua Vu Mulit Vu connects to your unit via a Lowrance video adapter power cable... Your aqua vu camera has to have a RCA Video Output, I'm not sure which camera you have, but I use the Multi Vu, which has RCA video output.
I spoke to Lowrance and they said the largest mini sd card I can use is a 32 gb. I had a 64 gb in it. So I ordered a 32 gb card and will try it next week. I have the AV Micro 5 plus, a very small unit. It probably does not have those features that you mentioned. Thanks.
I just wish hey weren't so expensive. $33 for the board and another $20 or so for the tattle flag. $50 for a piece of plastic and packing foam...
The only other thing I would suggest is not to put the screw eye in the top of the back the board. Instead drill a new hole near the bottom of the rear of the board. This fixes the issue with the rear of the planner board to sink and the nose to ride to high in the water. The difference is significant. This does not effect the tattle flag action at all. :P. Nice video.
Frank Mcchesney new video coming soon with updated ways to rig boards!
I like your Video....because you enjoy fishing you might like "Herring Running up river to spawn" It has some underwater shots....kzread.info/dash/bejne/aZid1M6Qhc-qc7Q.html If you like can you subscribe, I'm trying to get to 1k subs ..Thanks for sharing..
B
hey can u help me just got the gen 3 9 and 7 connected gonna buy a card from navionactis getting the east what i need to know is how to set my unit to take me from dock wherever i wanna go and it take me back not get lost lol now i plan on buting card to record on can u recomond one pleae thanks
larry clifton, any micro sd card will work to record, simple way is turn your trails on, then you can always follow your trail home. You can also record a route, see how to do that in your manual. For simple stuff like this, your unit should have enough internal storage that you don’t even need a sd card. I record on 16g micro sd cards for uploading and make genesis maps. I hope this helps!
Hey I'm new to Lowrance can I use this for land navigation? Specifically off road Baja Ca. Mexico?
Doug Kaul, it would mark a track and you would be able to make usable waypoints, but there would be very limited land navigation features. There are better options for land navigation...
Can't decide wiether to get a hds 9 or a helix 10
HDS 9! Lowrance user interface and sonar readings are SOOOOOOOOOO nice!
hey man great job on customizing rig for trolling, did not have a clue but you made plain instructional video, thanks
Why bother doing a tutorial if the images are blurry
it jacks up the tranducer when left on longer than five minutes out of water bud
Way better than the instructions that came with the planer. Thank you, Sir!
Just wanting to know do you just have the sonar and the 3d structure scan transducers? Or do you have the structures can transducer also?
yea tried to download updates ,,,,, yea that works out fine ,,,,,,,,,,,,,, not ,,,,,,
Hello friend nice video congratulations
How do you troll in rivers? With or against the current?