sounds soo good! thats wild how it lights up when ya spooled it in 4hi
@TurbaTyler5 күн бұрын
What shocks did you go with?
@true2youpictures1138 күн бұрын
Wheel setup?
@fonzyRS13 күн бұрын
you have to cut something or nah ?
@DMAXXDLLY23 күн бұрын
Every question I had answered in a single video sir bless you 😂🫡. Only thing I’m needing to know is there a body/paint shop near you whose work matches the level of your business? I want to trailer the thing there and grab it when it’s done one shot 😂
@Prty2426 күн бұрын
How did you ad the bypass line to the coolant pipe?
@dmax_dante25 күн бұрын
Weld a bung to it
@Prty2425 күн бұрын
-10 an correct?
@dmax_dante25 күн бұрын
Yep! Shocker fittings can get you everything to plumb it up!
@Prty2425 күн бұрын
Appreciate it. I’ll reach out and tell ‘em you sent me. Side note, what do you charge for an LMM harness cleanup job
@mattheintzelman414728 күн бұрын
I need a s400 in my life
@aaronshuster831528 күн бұрын
My cummins truck was never right with e mail tunes an logs, until I took it to firepunk an had Larson live dyno tune it. Day an night difference on spool up driveabilty an max effort power. Live dyno tunning by a good company is definitely worth the money
@dmax_dante28 күн бұрын
I’m confused here. Whose truck are you referring to in this video? They all run insanely good.
@aaronshuster831528 күн бұрын
@dmax_dante I just saying get your truck lived dyno tuned. It's obviously an AFC current issue causing your rail pressure issues.
@pixelgamer104728 күн бұрын
Who tuned that guys l5p??@@dmax_dante
@erikcaldwell827428 күн бұрын
Who’s tunes or what tune is on his L5P? I’m not pleased with my tune or TCM tuning on my ‘18
@bullettclubb793428 күн бұрын
they tune there own trucks
@erikcaldwell827425 күн бұрын
@@bullettclubb7934 any chance you could point me in the direction of getting in contact with them?
@owenpetersen6572Ай бұрын
Thinkin about doing this with my lmm but i still daily it would it be worth it to 48 swap my truck ive gone through 2 allisons and i want to start going for 900hp in the near future and how does it do at 75 80 mph cruising Does it over rev at all or does it keep it around normal
@dmax_danteАй бұрын
Finding a better Allison builder gets my vote. This is more so for competition use
@chrisclay3112Ай бұрын
Sweet video miss my lmm 😢 I got black on black appearance package 2012 lml now it’s quick just ant the lmm an throttle response… I think it want to long ago I saw u at sheetz in Roanoke rapids Nc I could b wrong
@YourMom-hk7rbАй бұрын
who’s drop shackles
@squiggysuhr4468Ай бұрын
Does motor need to be rebalanced doing lb7/lly crank and pistons on lmm/lbz rods?
@lanegeisewite1436Ай бұрын
So why not a 4L80 or a TH400?
@TyrileyowenАй бұрын
How you only have 2 k subscribers is mind blowing
@taytenbrundage2183Ай бұрын
ATP shoulda smacked a 4L60 in that ol girl😅 (nice truck)
@CadorSeeligerАй бұрын
Ummm why not an Allison?...
@jaydinsmith8152Ай бұрын
They’re heavy and slow
@lanegeisewite1436Ай бұрын
Ummmm why not a 4L80e or Th400?
@kevinlogan2306Ай бұрын
Its rowdy😎
@user-fb4cq1df2hАй бұрын
Dante sweet vid bro. Whats the cost on swapping the dmax with the 48?
@dmax_danteАй бұрын
Expensive 😂
@joshwebb609Ай бұрын
That's bad ass
@a.hagler3777Ай бұрын
Love the 48 content, Brother! Can’t wait to see you make some passes at UCC! Quick “hack”: use Meguiar’s Plastx on your headlights every month or so and your lenses will get more life. Has worked for me for multiple years now. Also, you NEED an HHPE/Hoosier Hills Performance Engineering Core support cover for Thicctory, in a bad way! She’s too pretty to not have one! We will have a booth at DPI this year at UCC. Come see us and GMax (Duramax powered big tire G-Body Malibu) at our booth! One last thing: please don’t cut the hood or the fender for the waste gate. Thicctory is to pretty for that! 💪💪
@mattpatrick1729Ай бұрын
Damn, there's my service truck with the flag up!
@joshuaquilliam2887Ай бұрын
48 swap the world! Love these transmissions. But get ready for some broken engine parts lmao. Nothing loads up a motor quite like a 48. Two less gears will really bring that Duramax to life.
@wittbeckerracingchannelАй бұрын
Truck was ROLLING 😮💨
@PhileapayАй бұрын
FAST AF BOI
@whistlinduramax7723Ай бұрын
The bucking is NOT the T-case... speaking from my experience anyway. I put a brand new tcase in, and it's still bucking.
@dmax_danteАй бұрын
Yep. I tried basically everything else I could. I don’t know where else to look at this point. Very frustrating
@DirtymaxhdtАй бұрын
Awesome
@ericblakeney8776Ай бұрын
We need to see more videos please
@dmax_danteАй бұрын
Of course!
@builtbymeАй бұрын
Least I'm not the only one who uses evil energy kits. I've never had any issues with them. Looking good. Personally I'm trying to do a 4l80 in my build cause your 100% right about the allison. And the allison is heavy as all hell.
@dmax_danteАй бұрын
Great stuff, good pricing. Never had a problem
@8aford97able2 ай бұрын
Looks good, Dante! Whatever happened with the triple turbo truck?
@dmax_dante2 ай бұрын
It’s here. Just Waiting on some odds & ends to wrap it up. Turned into a bigger project.
@bullettclubb79342 ай бұрын
which atmosphere turbo is that
@dmax_dante2 ай бұрын
Vs racing 80
@rrsttt75052 ай бұрын
Do you have a list of what hardware and other parts you needed? I have a 1500, just ordered a hood, about to order grille and bumper.
@lanegeisewite14362 ай бұрын
Another badass Dmax!! Fuckin love it!🇺🇲🇺🇲🇺🇲💪💪💪
@a.hagler37772 ай бұрын
NEED that Hoosier Hills core support cover! Good to see you back, brother! 💪💪
@alfredomartinez26152 ай бұрын
If you had that engine bay properly detailed and addressed, it would look 🔥
@dmax_dante2 ай бұрын
That’ll happen when this engine checks out and we start fresh.
@tunaboost48012 ай бұрын
Damn, you went all out. Awesome build. I want to compound my 5th Gen
@code10garage942 ай бұрын
Frickin ANIMAL!!👍🏽….Aloha🤙🏽
@Phileapay2 ай бұрын
Pretty badass tow rig
@danielb-c91002 ай бұрын
It needs a new dashboard.
@dmax_dante2 ай бұрын
Full interior swap is on the to do list!
@danielb-c91002 ай бұрын
What are the 3 trim options? Are you gonna do it? Dark laminated wood from 2009 or dark error laminated wood from 2011. Or stainless trim or lrite wood grain.
@dmax_dante2 ай бұрын
Ltz swap. And the aluminum/stainless trim. I have the seats & console already. Just need to find a dash that’s not cracked
@danielb-c91002 ай бұрын
Do you have the Cap holder stainless trim.
@danielb-c91002 ай бұрын
Just buy a new - from GM. You're about 600 to 800 bucks. And do a video how to reinforce the new one.
@PeteKarter2 ай бұрын
Yea to the 1/8th
@dmax_dante2 ай бұрын
Yeah and?
@Sledder_Curt2 ай бұрын
What about the tow hooks?
@haydenavis41932 ай бұрын
You ever done a FICM truck? Anything special needed when relooming it?
@dmax_dante2 ай бұрын
Nothing different. You could extend and reroute the ficm to different locations
@haydenavis41932 ай бұрын
@@dmax_dante what gauge wire do you use?
@ronmeyer87703 ай бұрын
Bad Ass!!
@wittbeckerracingchannel3 ай бұрын
She’s rolling out this year
@whistlinduramax77233 ай бұрын
Let me know if you fix the bucking... mine does the same thing with a similar setup, and it drives me crazy.
Пікірлер
Sell me that Allison
what are your thoughts on 467s? hahaha
sounds soo good! thats wild how it lights up when ya spooled it in 4hi
What shocks did you go with?
Wheel setup?
you have to cut something or nah ?
Every question I had answered in a single video sir bless you 😂🫡. Only thing I’m needing to know is there a body/paint shop near you whose work matches the level of your business? I want to trailer the thing there and grab it when it’s done one shot 😂
How did you ad the bypass line to the coolant pipe?
Weld a bung to it
-10 an correct?
Yep! Shocker fittings can get you everything to plumb it up!
Appreciate it. I’ll reach out and tell ‘em you sent me. Side note, what do you charge for an LMM harness cleanup job
I need a s400 in my life
My cummins truck was never right with e mail tunes an logs, until I took it to firepunk an had Larson live dyno tune it. Day an night difference on spool up driveabilty an max effort power. Live dyno tunning by a good company is definitely worth the money
I’m confused here. Whose truck are you referring to in this video? They all run insanely good.
@dmax_dante I just saying get your truck lived dyno tuned. It's obviously an AFC current issue causing your rail pressure issues.
Who tuned that guys l5p??@@dmax_dante
Who’s tunes or what tune is on his L5P? I’m not pleased with my tune or TCM tuning on my ‘18
they tune there own trucks
@@bullettclubb7934 any chance you could point me in the direction of getting in contact with them?
Thinkin about doing this with my lmm but i still daily it would it be worth it to 48 swap my truck ive gone through 2 allisons and i want to start going for 900hp in the near future and how does it do at 75 80 mph cruising Does it over rev at all or does it keep it around normal
Finding a better Allison builder gets my vote. This is more so for competition use
Sweet video miss my lmm 😢 I got black on black appearance package 2012 lml now it’s quick just ant the lmm an throttle response… I think it want to long ago I saw u at sheetz in Roanoke rapids Nc I could b wrong
who’s drop shackles
Does motor need to be rebalanced doing lb7/lly crank and pistons on lmm/lbz rods?
So why not a 4L80 or a TH400?
How you only have 2 k subscribers is mind blowing
ATP shoulda smacked a 4L60 in that ol girl😅 (nice truck)
Ummm why not an Allison?...
They’re heavy and slow
Ummmm why not a 4L80e or Th400?
Its rowdy😎
Dante sweet vid bro. Whats the cost on swapping the dmax with the 48?
Expensive 😂
That's bad ass
Love the 48 content, Brother! Can’t wait to see you make some passes at UCC! Quick “hack”: use Meguiar’s Plastx on your headlights every month or so and your lenses will get more life. Has worked for me for multiple years now. Also, you NEED an HHPE/Hoosier Hills Performance Engineering Core support cover for Thicctory, in a bad way! She’s too pretty to not have one! We will have a booth at DPI this year at UCC. Come see us and GMax (Duramax powered big tire G-Body Malibu) at our booth! One last thing: please don’t cut the hood or the fender for the waste gate. Thicctory is to pretty for that! 💪💪
Damn, there's my service truck with the flag up!
48 swap the world! Love these transmissions. But get ready for some broken engine parts lmao. Nothing loads up a motor quite like a 48. Two less gears will really bring that Duramax to life.
Truck was ROLLING 😮💨
FAST AF BOI
The bucking is NOT the T-case... speaking from my experience anyway. I put a brand new tcase in, and it's still bucking.
Yep. I tried basically everything else I could. I don’t know where else to look at this point. Very frustrating
Awesome
We need to see more videos please
Of course!
Least I'm not the only one who uses evil energy kits. I've never had any issues with them. Looking good. Personally I'm trying to do a 4l80 in my build cause your 100% right about the allison. And the allison is heavy as all hell.
Great stuff, good pricing. Never had a problem
Looks good, Dante! Whatever happened with the triple turbo truck?
It’s here. Just Waiting on some odds & ends to wrap it up. Turned into a bigger project.
which atmosphere turbo is that
Vs racing 80
Do you have a list of what hardware and other parts you needed? I have a 1500, just ordered a hood, about to order grille and bumper.
Another badass Dmax!! Fuckin love it!🇺🇲🇺🇲🇺🇲💪💪💪
NEED that Hoosier Hills core support cover! Good to see you back, brother! 💪💪
If you had that engine bay properly detailed and addressed, it would look 🔥
That’ll happen when this engine checks out and we start fresh.
Damn, you went all out. Awesome build. I want to compound my 5th Gen
Frickin ANIMAL!!👍🏽….Aloha🤙🏽
Pretty badass tow rig
It needs a new dashboard.
Full interior swap is on the to do list!
What are the 3 trim options? Are you gonna do it? Dark laminated wood from 2009 or dark error laminated wood from 2011. Or stainless trim or lrite wood grain.
Ltz swap. And the aluminum/stainless trim. I have the seats & console already. Just need to find a dash that’s not cracked
Do you have the Cap holder stainless trim.
Just buy a new - from GM. You're about 600 to 800 bucks. And do a video how to reinforce the new one.
Yea to the 1/8th
Yeah and?
What about the tow hooks?
You ever done a FICM truck? Anything special needed when relooming it?
Nothing different. You could extend and reroute the ficm to different locations
@@dmax_dante what gauge wire do you use?
Bad Ass!!
She’s rolling out this year
Let me know if you fix the bucking... mine does the same thing with a similar setup, and it drives me crazy.
Will do! Thought I fixed it but it came back smh
We need a tow pig update video
Soon!
Homie going to compounds 😮😮
101mm over S480 😳
On3 performance 107