Пікірлер

• 
  @Lukenessmonster10 күн бұрын

  Bro made an entire video about the sony zv-10 but every camera shown in the video was a different camera

• 
  @Leadership_matters12 күн бұрын

  3 things! 1. I have that shirt!!!! Did you print that? 2. I am really struggling to gind some good blank sources. 3. Do you every have issues with dye migration and poly blends?

• 
  @Leadership_matters12 күн бұрын

  Blank sources in the area where I can go in.

• 
  @MasterScreenPrints11 күн бұрын

  Blanks in the area, like bell? I sometimes go to Downtown L.A on Main Street and 14th St a place called t-zone and they are other places around the area where you can get shirts

• 
  @Leadership_matters11 күн бұрын

  @@MasterScreenPrints t zone! That is a place to start! Thanks! I drove through there and was overwhelmed by all the merch. I used to be there all the time on the RTD when I was a kid. Thanks.

• 
  @MasterScreenPrints11 күн бұрын

  I used to go there a lot. The shirts they have on TZone are fruit of the loom or jerzy but they are good quality. I never had complaints on the shirts. They are not heavy set though.

• 
  @caknelson225417 күн бұрын

  ....................You guys NEVER speak about the Gildan TRI-BLEND!!

• 
  @MasterScreenPrints8 күн бұрын

  Thanks for bringing up the Gildan TRI-BLEND, it's definitely worth discussing!

• 
  @YaBoiFishSticks20 күн бұрын

  Amazing vid, bro!

• 
  @MasterScreenPrints20 күн бұрын

  Appreciate it!

• 
  @tomwall236122 күн бұрын

  What's the heaviest, thickest Gildan shirt? Is there anything heavier than their Heavy Cotton line?

• 
  @MasterScreenPrints20 күн бұрын

  Yes, the 5000 is the heaviest

• 
  @kekoa506224 күн бұрын

  S&S shipping is crazy expensive

• 
  @MasterScreenPrints19 күн бұрын

  How much you pay?

• 
  @MasterScreenPrints26 күн бұрын

  Thank you for watching our beginner's guide on the best shirts for screen printing! 🎨👕 If you have questions or need further advice on choosing the right shirts for your projects, comment below! We'd love to hear your experiences and recommendations too. Don't forget to like, subscribe, and share this video with fellow screen printing enthusiasts. Stay tuned for more tutorials and tips, and remember - never stop being awesome! 🌟 #ScreenPrinting #CustomShirts #QualityMatters #MasterScreenPrints

• 
  @Leadership_mattersАй бұрын

  No pressing shirts until tacos al pastor!!!!

• 
  @MasterScreenPrintsАй бұрын

  Sounds good

• 
  @shotsbyzayaАй бұрын

  Is that Reyes talking?

• 
  @MasterScreenPrintsАй бұрын

  Yes, the Reyes

• 
  @mikeledee8786Ай бұрын

  Where do you buy your transfers from? Thanks

• 
  @MasterScreenPrintsАй бұрын

  I use supacolor transfers

• 
  @rezzbuilds8343Ай бұрын

  I do all the designing myself. Its the production and busines side i need help with

• 
  @MasterScreenPrintsАй бұрын

  What do you do, transfers or screen printing?

• 
  @rezzbuilds8343Ай бұрын

  @MasterScreenPrints I started with embroidery, I've been averaging a fully finished, digitized, tested, 8x8 custom design a week. Now I'm getting into transfers to speed up the process and production. Just got 100 in the mail today, event is on Saturday

• 
  @MasterScreenPrintsАй бұрын

  @@rezzbuilds8343 good luck, yes transfers are so convenient. You can always do more than one size so you don’t have to do them all.

• 
  @rezzbuilds8343Ай бұрын

  @@MasterScreenPrints yeah the re digitizing stuff is a pain my arse. Especially when i want to change the design around a bit seems like I have to start over

• 
  @MasterScreenPrintsАй бұрын

  @@rezzbuilds8343 I did digitize just to know how to do it. I don’t have embroidery but I order patches. I have little room in my house and this works for me.

• 
  @TACDetectiveАй бұрын

  How soft is the feel of the transfer on the garment please?

• 
  @MasterScreenPrintsАй бұрын

  It feels like screen printing. It feels smooth

• 
  @garykreutzer1239Ай бұрын

  I'd only charge that much in Hollywood, NYC and Palm Beach. Everybody else would laugh at me.

• 
  @MasterScreenPrintsАй бұрын

  Don’t worry about what people may say or think. Always deliver high quality service.

• 
  @Leadership_mattersАй бұрын

  What happened to the video speed at 6:30?

• 
  @MasterScreenPrintsАй бұрын

  I speed up the video. It was so long so I tried to speed it up.

• 
  @Leadership_mattersАй бұрын

  You have a full quiver of heat presses!!!! You can make a quesadilla on a comal in that same amount of time!!!! Btw you should look into getting your son into Bell High. We have a full print shop with heat presses, sublimation, silk screen, vinyl, and more.

• 
  @MasterScreenPrintsАй бұрын

  Really? That’s awesome.

• 
  @Leadership_matters2 ай бұрын

  Thank you. I will be giving supacolor a shot.

• 
  @MasterScreenPrintsАй бұрын

  Awesome! you wont be disappointment and i am not affiliated but please let them know that you were referred by me.

• 
  @Leadership_mattersАй бұрын

  @@MasterScreenPrints ok

• 
  @garypiatt46662 ай бұрын

  He only charges $2.30 each?? For finished shirts????? How does he make any money??? Oh, I finished watching the video. LOL!!! Yeah, he makes money!

• 
  @MasterScreenPrintsАй бұрын

  After a while you have to charge for your knowledge.

• 
  @Leadership_matters2 ай бұрын

  I use FM expressions and they work for me. I am going to try supacolor and tko on the advice of Big Brandoh. I want to try hot split and good proof. FM has done me solid though. .15$ transfers work fine for me.

• 
  @MasterScreenPrintsАй бұрын

  Always good to try them to see which works best for you and your business. I chose to use mostly supacolor but I have used F&M

• 
  @Leadership_matters2 ай бұрын

  I want to jump into DTF but I have seen some that were very much lacking in bright colors and the whites were not bright. I would like to see how do you colormatch your design with supacolor or how you make your designs so they pop. Thanks man. Keep it up.

• 
  @theawakeninghour27162 ай бұрын

  $23 !!!!! No way, Id never get business!!!!

• 
  @MasterScreenPrints2 ай бұрын

  Share how you price your shirts. Make a video and share with me.

• 
  @cutiebunny86682 ай бұрын

  ❤❤❤

• 
  @biancahoward1332 ай бұрын

  I'm I'm sorry that no one commented😢

• 
  @MasterScreenPrints2 ай бұрын

  You did. Thank you

• 
  @biancahoward1332 ай бұрын

  I would love to know how to make it

• 
  @MartelRichardson-kb2rc2 ай бұрын

  R.I.P.

• 
  @TheGreatPewpyOne2 ай бұрын

  Imagine posting this dogshit.. like seriously at what point did you think this sad excuse for cOnTeNt was worth posting? Voiceovers are by far the lowest form of comedy

• 
  @JustAballer-452 ай бұрын

  Haha I’m laughing so hard rn 😐

• 
  @Leadership_matters2 ай бұрын

  Have you ever used HG from the City of Bell?

• 
  @MasterScreenPrints2 ай бұрын

  What’s HG?

• 
  @Leadership_matters2 ай бұрын

  @@MasterScreenPrints hg graphic and printing on I think gage. I saw his place on the rye beats channel

• 
  @Leadership_matters2 ай бұрын

  @@MasterScreenPrints he prints DTF. I'm not sure of the quality I was hoping maybe you knew. My friend from work just ordered from FM expressions and they were not great

• 
  @MasterScreenPrints2 ай бұрын

  Oh yea, I know which one your talking about out now. I use to live close to them. I never used them. I’ve seen some of the work it looks good but honestly I never used them.

• 
  @abysss563 ай бұрын

  Does it take long to heatup? Someone said like 20 min

• 
  @Daniellex0x02 ай бұрын

  I am here to ask this also. Tech support says 25-30 mins is normal. That is so long and probably would’ve possibly made me reconsider my purchase.

• 
  @MasterScreenPrints2 ай бұрын

  Want me to make a video and see how long it takes?

• 
  @Daniellex0x02 ай бұрын

  @@MasterScreenPrints sure! I finally talked to a tech support agent who had never seen this press in person or had access to one. I think this model just takes a long time to heat up. Sure would be nice if they’d disclose that before purchase.

• 
  @MasterScreenPrints2 ай бұрын

  Are you calling #heatpressnation? I am sure they will advise. I just did a video and I will release it this weekend.

• 
  @Daniellex0x02 ай бұрын

  @@MasterScreenPrints yes I did the agent I’m referring to was from hpn. I think they just take that long to heat up 🤷‍♀️

• 
  @newnarratives3 ай бұрын

  Do you have a shareable template of your prices

• 
  @MasterScreenPrints3 ай бұрын

  I am actually working on one. I have looked everywhere for it and there is none. I’m going to try to simplify so that people can use it for a low cost.

• 
  @MasterScreenPrints3 ай бұрын

  When I was trying to make a transparency for screen printing and the printer did not work. I waited till the next day and still didn’t work. Any ideas anyone? Did you fix it or get a new printer?

• 
  @MadeByTriniLena3 ай бұрын

  Wow happy for you, I need to try those transfers, from TshirtChick house

• 
  @Leadership_matters3 ай бұрын

  Are you still using the craft pro? I was looking at the craft pro vs the signature series. How many shirts do you do in a session?

• 
  @MasterScreenPrintsАй бұрын

  I am still using the craftpro. If you are going to get a heatpress get the signature series. Having a automated does help you with your projects.

• 
  @Leadership_mattersАй бұрын

  @@MasterScreenPrints thanks!

• 
  @AlaskaBikeDoctor3 ай бұрын

  When you do an application on the front and back, do you have to worry about overheating whatever you put on first? Like, if you did the back first, then you flip the shirt over to do the front, can that damage what you put on the back because if the doubled heat time?

• 
  @MasterScreenPrintsАй бұрын

  I did a video and I explained that it does not damage the front or back with additional heat.

• 
  @crispybits67374 ай бұрын

  Imagine doing such a low effort reaction video and still not cropping the video properly. Big oof

• 
  @MasterScreenPrints4 ай бұрын

  Thank you for the feedback. What could I have done better?

• 
  @sewsewon15414 ай бұрын

  Thank you for sharing your experience with us.

• 
  @MasterScreenPrints4 ай бұрын

  My pleasure!

• 
  @MasterScreenPrints2 ай бұрын

  Any questions you have please let me know.

• 
  @Me-MyArmy5 ай бұрын

  Very informative, thank you!

• 
  @luisavaldes26365 ай бұрын

  God bless

• 
  @MasterScreenPrints5 ай бұрын

  Thank you so much!

• 
  @mightymouse93055 ай бұрын

  Ex. How much would that cost?

• 
  @MasterScreenPrints5 ай бұрын

  Take a look at my long form video

• 
  @MasterScreenPrints5 ай бұрын

  Creating art in a good way, supporting my kids through every step. #dad #lovemykids #screenprinting #fyp #viral

• 
  @sharpcatgrafix5 ай бұрын

  My shirts are $15 that includes screen printing or sublimation dye prints

• 
  @MasterScreenPrintsАй бұрын

  That’s a good price. Does it depend on the quantity?

• 
  @danielmachac47645 ай бұрын

  🤣🤣🤣🤣🤣

• 
  @drinkmorecocacola5 ай бұрын

  LMFAO. GENIUS CONTENT. HIGH LEVEL SHORT.

• 
  @sakthy32705 ай бұрын

  😍

• 
  @justinyourdm17385 ай бұрын

  I currently only do decals but I’ve just purchased a heat press and attachments, started making htv shirts but looking into dtf. I buy my designs from Etsy svg,png files and make sure you read the descriptions because they may have a commercial license you have to buy to use there designs for resale. Helps me from spending the time making a custom decal when I can support other small businesses as well 👍🏻 can you do a video on how you purchase your dtf sheets?

• 
  @MasterScreenPrints5 ай бұрын

  I certainly will. I’ll add the link as well

• 
  @rubensolis715 ай бұрын

  Need some SICKSIDE shirts

• 
  @MasterScreenPrints5 ай бұрын

  I’ll send you invoice.

• 
  @classyapartmentsNY6 ай бұрын

  Which heat press do u use?

• 
  @MasterScreenPrints5 ай бұрын

  I use the craft pro slide out 15x15 from @heatpressnation

• 
  @melbamelton16326 ай бұрын

  How do you measure the placement going down the sleeve of a long sleeve shirt?

• 
  @MasterScreenPrints6 ай бұрын

  Thank you for your response. I will make a video with that explanation just for you.

• 
  @North-wy7yc6 ай бұрын

  PC all day

• 
  @MasterScreenPrints5 ай бұрын

  Thanks for sharing, go to my community on my channel and add your vote.

• 
  @izeman7206 ай бұрын

  Is that Reyes asking questions?

• 
  @MasterScreenPrints6 ай бұрын

  Yes it is. He has helped me a lot.

• 
  @ItsMoney226 ай бұрын

  Hey great job!! I would like to send you a couple samples of my transfers. I can provide fast shipping and great quality