This channel is a give back to all the video's i have learned from..hopefully you can learn from my mistakes or the different ways i like to do things.
Doing an 03 Yukon Denali XL, the lines to the rear A/C are bad. Replacing all the lines up front to lines meant for a pickup truck. Front air conditioning is better than none. It's been about 8 years since I've done A/C work. I got my certification in the 90s but a little refresher class always helps.
@ormanay6 күн бұрын
Thank you!!!
@johnnywynne356410 күн бұрын
your pitman arm may be out
@thrillbillyjp115 күн бұрын
All that bullshit and u didnt toss knocks with new harnesses. Come on guy . Research research research .. lol
@kemba547618 күн бұрын
What if it's stuck
@jtg273726 күн бұрын
If there is a crack on that rubber boot how does this affect the truck itself?
@alennx22Ай бұрын
Thank you Sir ... this got me 90% of the way there ... I had to use a 15" adjustable crescent wrench to walk the ring on with my body weight, but the job is done 😂
@alterpole1976Ай бұрын
Great Video! Thx from Germany!
@thesetruths1404Ай бұрын
Anyone know the torque specs for the clutch fork pivot pins? Thanks!
@Jay_DahlАй бұрын
I was reading that the fan resistor sometimes goes out when the fan motor is getting old, and drawing too much current.
@GregFlynn-le1vx2 ай бұрын
Of 2002 tahoe
@GregFlynn-le1vx2 ай бұрын
Do you have to have a lift to take out tank
@N8andKids2 ай бұрын
I love a good “that’s what she said”
@Stuckofftherealness2 ай бұрын
What year ??
@gwells32332 ай бұрын
Has anyone asked how long this rebuild held up?
@NoName-gv9nb2 ай бұрын
Use a multi tool with a metal cutting blade...$13.99 harbor freight
@Lazarus.092 ай бұрын
When turning on you AC to max and max air flow, are you also doing the same, max everything on the back passenger half also?
@davidgregory20162 ай бұрын
Funny censorship
@davidg8132 ай бұрын
Why not use Nickle Copper line and rout it to an easier path to the back. You can bend Nicop by hand without kinking the line. It sure seems it would be easier than snaking it past all those wires and obstacles to get it to the rear connection. Why even take out the old line just route around it.
@veronicaperez73002 ай бұрын
Thank you!!!
@vonshango63112 ай бұрын
after being told by 2-3 shops the steering rack was blown, dealer quoting a $2500 job, driving 11K miles and for the last year just adding 3 oz of STP 'stop leak' steering fluid (high mileage) every 7-10 days whenever steering started whirring (in warmer seasons, winter much less often), i finally googled '06 honda accord poor man's steering rack leak fix' and landed on a guy in a honda forum saying ATP AT-200 did the trick. i did a new search on that, saw 5 youtube mechanics saying same and demonstrating it and was game to try my luck. so, i got a $13 bottle poured 3-4oz of ATP AT-205 and cant recall if i let it sit overnight or drove off for some short nearby driving (my usual), but after 5 days i put fresh cardboard under car to monitor it and the leak slowed-up from 3 drips to 2 and 1 then stopped in 10 days, added another 3-4oz for good measure at first hint of a whir. dont know how long it'll hold, but the dripping stopped. what next? do i now switch back to regular steering fluid? presumably the good grade stuff (not the cheap leak fixer stuff). also, i can see oil buildup has sprayed somehow from the bottom of the SF reservoir onto everything below so now i need to know whether i should get a bottle of degreaser with spray nozzle (safer/gentler on rubber) that i can try to spray what i can reach or ask a shop to do it. i feel like i asked a mechanic once and they said they dont do that. does that sound right?
@AndrewMejia-qb3vj2 ай бұрын
Can I leave the cv axle off and drive the Tahoe like that
@masonmcnabb2429Ай бұрын
No reason to lmao.
@masonmcnabb2429Ай бұрын
Unless it's broke that is
@JackMeyHoffer5622 ай бұрын
#TeamTicklyAnusFTW
@winstonpinedagerman25562 ай бұрын
Hello , I have a lyqueo problem in rear main seal , I can use this product in a mini cooper s convertible 2011, thank you I look forward to your answer and advice
@winstonpinedagerman25562 ай бұрын
I use a bottle , from there , how long does the oil liquid not reappear , every time I put another bottle , please answer me .
@minhgtr2 ай бұрын
I dont give a shit. You are awesome. Great video. Great keeping it real too lol
@charlesjuett74452 ай бұрын
Thats not the death wobble
@EricDenman-fr1xx3 ай бұрын
Looks like a good job HOWEVER you should have put a beed of silicone in all the gap areas in valley , 4 each locations should have silicone gasket glue.
@2Stackd3 ай бұрын
“i dont even know who blake is” 🤣🤣🤣
@commoncentsamerican3 ай бұрын
Excellent Video 222,666 and still going STRONG!!!!! That's because he buys Chevy!!! LIKE A ROCK!!!
@horaciopachon34793 ай бұрын
Do you sell used parts for UH70055, the one of the video?
@ehernandez19173 ай бұрын
Man we cracking at deep down there and tackle anus and!! He said his Anus still tickle 😂😂😂😂😂😅😅😅😅😅
@venomchallenger3 ай бұрын
😂😂🦾
@aidbnn4 ай бұрын
What’s the part number ?
@StormLaker4 ай бұрын
Definitely will be bookmarking these videos. My wife and I are looking to buy a home that has a similar setup. I effing hate above ground pools, I live in Iowa- they are pointless to own, since you can only use them 3 months out of the year, haha. If we buy the house, we'll be making the previous owners take it out so we can fill in the hole with deck boards, or just remove a portion of the deck and recycle the lumber to build it the footprint we want and maybe gain back some of our yard.
@joaquinsolis70715 ай бұрын
“Let’s wipe it off with a rag”. That’s also what she said
@benjaminsondelski30735 ай бұрын
I'm not sure this will really fix the leak. Sealing between the motor and the transfer case will prevent fluid from leaking out between them, but then the motor itself will fill with the fluid. I think the problem is a seal on the control actuator lever shaft bearing is leaking. Details on this bearing with seal: kzread.info/dash/bejne/Y2WYxbqQnszWm7w.htmlsi=5Xdu4H_crXd59fEI&t=1105
@TonyYesi5 ай бұрын
Loving this review 😂. This stuff helped stopped an oil leak in my 03 Excursion, it worked for me.
@123Kevindp5 ай бұрын
Thx soooo much for this video! I just fixed mine! Thx 2u! FYI, I left it mounted on the door, removed the 4 screws, & hammered the nut back on. Simple. God bless u
@2Jeezuzisreal5 ай бұрын
Great idea thanks. I can't do that in my neighborhood they'll call the cops. Maybe I'll wrap a huge blanket around the tail pipe.
@bls29355 ай бұрын
Who cares!! By the time the cops arrive you’re gonna be done and with a huge smile with the results 🤷🏻♂️
@seadragon33506 ай бұрын
Got the same problem
@Vanhalen16 ай бұрын
Is it a seal or gasket? Heard this stuff won't help gaskets
@imnotabotrlyimnot2 ай бұрын
It rejuvenates rubber, will not work on other materials.
@maxrockatansky12716 ай бұрын
i put this in my tickly anus and holy shit it worked. Thanks, Steve Rob.
@thecuss68176 ай бұрын
I've had this go bad on 3 GM vehicles. First one a shop replaced, like $400. I did the second two, had to grind a 5.5mm socket shorter at both ends to access the screws, found it easier to access the driver side screw from the driver footwell, reaching in front of the console (2014 Yukon).
@glenglene84736 ай бұрын
My Lexus ES had oil leak at rear main seal. I used Bluedevil (similar to AT 205) rear main sealer and oil stopped. Wondering how long it lasts? Should I use it every oil change?
@TePasasALV3 ай бұрын
How's it going with the leak?
@blkpwronthe4116 ай бұрын
How do you replace the control arm, it broke off when I took the actuator off?
@digitalmixer6 ай бұрын
Part no. Rick?
@PaulHenreid7 ай бұрын
lol
@jasonmartindale31717 ай бұрын
Have to remake this with Bud light now
@JohnSmith-vt5ry7 ай бұрын
What’s your thoughts on using this as preventative maintenance? Maybe add it to oil change or transmission once a year?
Пікірлер
Quality content. Thanks for uploading.
Doing an 03 Yukon Denali XL, the lines to the rear A/C are bad. Replacing all the lines up front to lines meant for a pickup truck. Front air conditioning is better than none. It's been about 8 years since I've done A/C work. I got my certification in the 90s but a little refresher class always helps.
Thank you!!!
your pitman arm may be out
All that bullshit and u didnt toss knocks with new harnesses. Come on guy . Research research research .. lol
What if it's stuck
If there is a crack on that rubber boot how does this affect the truck itself?
Thank you Sir ... this got me 90% of the way there ... I had to use a 15" adjustable crescent wrench to walk the ring on with my body weight, but the job is done 😂
Great Video! Thx from Germany!
Anyone know the torque specs for the clutch fork pivot pins? Thanks!
I was reading that the fan resistor sometimes goes out when the fan motor is getting old, and drawing too much current.
Of 2002 tahoe
Do you have to have a lift to take out tank
I love a good “that’s what she said”
What year ??
Has anyone asked how long this rebuild held up?
Use a multi tool with a metal cutting blade...$13.99 harbor freight
When turning on you AC to max and max air flow, are you also doing the same, max everything on the back passenger half also?
Funny censorship
Why not use Nickle Copper line and rout it to an easier path to the back. You can bend Nicop by hand without kinking the line. It sure seems it would be easier than snaking it past all those wires and obstacles to get it to the rear connection. Why even take out the old line just route around it.
Thank you!!!
after being told by 2-3 shops the steering rack was blown, dealer quoting a $2500 job, driving 11K miles and for the last year just adding 3 oz of STP 'stop leak' steering fluid (high mileage) every 7-10 days whenever steering started whirring (in warmer seasons, winter much less often), i finally googled '06 honda accord poor man's steering rack leak fix' and landed on a guy in a honda forum saying ATP AT-200 did the trick. i did a new search on that, saw 5 youtube mechanics saying same and demonstrating it and was game to try my luck. so, i got a $13 bottle poured 3-4oz of ATP AT-205 and cant recall if i let it sit overnight or drove off for some short nearby driving (my usual), but after 5 days i put fresh cardboard under car to monitor it and the leak slowed-up from 3 drips to 2 and 1 then stopped in 10 days, added another 3-4oz for good measure at first hint of a whir. dont know how long it'll hold, but the dripping stopped. what next? do i now switch back to regular steering fluid? presumably the good grade stuff (not the cheap leak fixer stuff). also, i can see oil buildup has sprayed somehow from the bottom of the SF reservoir onto everything below so now i need to know whether i should get a bottle of degreaser with spray nozzle (safer/gentler on rubber) that i can try to spray what i can reach or ask a shop to do it. i feel like i asked a mechanic once and they said they dont do that. does that sound right?
Can I leave the cv axle off and drive the Tahoe like that
No reason to lmao.
Unless it's broke that is
#TeamTicklyAnusFTW
Hello , I have a lyqueo problem in rear main seal , I can use this product in a mini cooper s convertible 2011, thank you I look forward to your answer and advice
I use a bottle , from there , how long does the oil liquid not reappear , every time I put another bottle , please answer me .
I dont give a shit. You are awesome. Great video. Great keeping it real too lol
Thats not the death wobble
Looks like a good job HOWEVER you should have put a beed of silicone in all the gap areas in valley , 4 each locations should have silicone gasket glue.
“i dont even know who blake is” 🤣🤣🤣
Excellent Video 222,666 and still going STRONG!!!!! That's because he buys Chevy!!! LIKE A ROCK!!!
Do you sell used parts for UH70055, the one of the video?
Man we cracking at deep down there and tackle anus and!! He said his Anus still tickle 😂😂😂😂😂😅😅😅😅😅
😂😂🦾
What’s the part number ?
Definitely will be bookmarking these videos. My wife and I are looking to buy a home that has a similar setup. I effing hate above ground pools, I live in Iowa- they are pointless to own, since you can only use them 3 months out of the year, haha. If we buy the house, we'll be making the previous owners take it out so we can fill in the hole with deck boards, or just remove a portion of the deck and recycle the lumber to build it the footprint we want and maybe gain back some of our yard.
“Let’s wipe it off with a rag”. That’s also what she said
I'm not sure this will really fix the leak. Sealing between the motor and the transfer case will prevent fluid from leaking out between them, but then the motor itself will fill with the fluid. I think the problem is a seal on the control actuator lever shaft bearing is leaking. Details on this bearing with seal: kzread.info/dash/bejne/Y2WYxbqQnszWm7w.htmlsi=5Xdu4H_crXd59fEI&t=1105
Loving this review 😂. This stuff helped stopped an oil leak in my 03 Excursion, it worked for me.
Thx soooo much for this video! I just fixed mine! Thx 2u! FYI, I left it mounted on the door, removed the 4 screws, & hammered the nut back on. Simple. God bless u
Great idea thanks. I can't do that in my neighborhood they'll call the cops. Maybe I'll wrap a huge blanket around the tail pipe.
Who cares!! By the time the cops arrive you’re gonna be done and with a huge smile with the results 🤷🏻♂️
Got the same problem
Is it a seal or gasket? Heard this stuff won't help gaskets
It rejuvenates rubber, will not work on other materials.
i put this in my tickly anus and holy shit it worked. Thanks, Steve Rob.
I've had this go bad on 3 GM vehicles. First one a shop replaced, like $400. I did the second two, had to grind a 5.5mm socket shorter at both ends to access the screws, found it easier to access the driver side screw from the driver footwell, reaching in front of the console (2014 Yukon).
My Lexus ES had oil leak at rear main seal. I used Bluedevil (similar to AT 205) rear main sealer and oil stopped. Wondering how long it lasts? Should I use it every oil change?
How's it going with the leak?
How do you replace the control arm, it broke off when I took the actuator off?
Part no. Rick?
lol
Have to remake this with Bud light now
What’s your thoughts on using this as preventative maintenance? Maybe add it to oil change or transmission once a year?