Пікірлер

• 
  @garryrobbins4686Ай бұрын

  beautiful boat, i heard the pedestal seats for the front and rear platforms are cheap and wobbly also it is said to real hard to change out he trolling motor. is this true?

• 
  @jimk3043 ай бұрын

  Link for the diamond non slip adheasive pads

• 
  @joedomyslawski51843 ай бұрын

  Great review, you got in depth why you liked it and compared it to your HBC and what you preferred, excellent review.

• 
  @MrRourk3 ай бұрын

  Beiter has the smooth draw

• 
  @michaelschnitzer40543 ай бұрын

  Just grabbed some Q2i griff x 3.0. No prep needed seem to steer good so far with a helical we’ll see how they steer broadheads. I’d use the raptor series but clearance was an issue

• 
  @user-hq9ot1hn4j4 ай бұрын

  Great videos this has been bothering me for 2 years now I have the arrow almost parallel to the inside of the shelf shoots bullet holes out to 20 yds with bare shafts but after that my arrow nock kicks left in the arrow hits right of my fletched do you have any suggestions I've tried moving cams and rest

• 
  @gmatthewpaul4 ай бұрын

  Just got a new old stock solution! Purchased an Elite Omnia also. Ready to test the 2 against each other. I will say the Omnia is much heavier physically felling.

• 
  @hoganfan20066 ай бұрын

  Very informative. Thank you.

• 
  @neylandbailey40207 ай бұрын

  What power poles are those

• 
  @darthjar91177 ай бұрын

  The minn kota chargers have a maintenance mode as well

• 
  @cristobalv7 ай бұрын

  Hi, i'm between the freakshow QD and the Beiter compound rest, both are good from i have read but which one would you choose ?

• 
  @3604x47 ай бұрын

  Where did u run the drain for the recessed tray?

• 
  @3604x47 ай бұрын

  What is the height of the power poles above the transom? Will it clear a standard 9x7’garage door ?

• 
  @russirvine94547 ай бұрын

  Over an hour and doesn't actually show us how to do a thing, how mods move, are changed, nothing.

• 
  @benstewart13367 ай бұрын

  Still have the info on the paper tuning station?

• 
  @goatio0078 ай бұрын

  Do they have different length risers? Cheers

• 
  @racin11ry8 ай бұрын

  Blade rests have won all the major tournaments for years. Not to say we won’t start seeing a fall away begin to change that trend. Good video thanks for the info

• 
  @olehemlock9 ай бұрын

  Did all the Reckonings come with metal limb pockets instead of plastic?

• 
  @mrgabriale10 ай бұрын

  Man I’m having all sorts of problems with my Ss solution. Im sure the riser has a twist in it. When you put the bow on a flat set surface the bow has a quarter inch gap where you can rock the bow. Always wants to paper tear point right. No matter how far I move the cams to the right or even arrow rest to the right. I’m a bit gutted because I bought this on the belief they were easy to tune

• 
  @dougmead766910 ай бұрын

  What kind and size screws did you use to mount your tool caddys? Thanks!

• 
  @dougmead766910 ай бұрын

  Do you have any recommendations for security locks for the rod locker and aft locker? I looked online, and there are billions, thought maybe you would have one in mind, haven't seen much on this, thanks!

• 
  @mckinleybrown156711 ай бұрын

  Definitely the best upgraded tracker I’ve seen how are the power poles holding up. Any issues with boat?

• 
  @mckinleybrown156711 ай бұрын

  Love what you have done to boat. You should make some fishing vids on boat.

• 
  @mrpickles347911 ай бұрын

  Helical fletch - could be spinning and hitting on the way through. Try straight fletched.

• 
  @ethanmcnally21 Жыл бұрын

  Does anyone else’s Tracker 170 slide side to side on the trailer when taking corners while trailering?

• 
  @3604x47 ай бұрын

  Not at all. I use boat buckle tie downs in back

• 
  @bobbyrobbins9816 Жыл бұрын

  Love the boat, don’t care for the sticks sticking up at the transom, but hey it’s your rig, do whatever makes you happy. I would love to have the 170 pro with a 250 hp on it.

• 
  @bushidocode4773 Жыл бұрын

  These went through the grass mats like butter. Best weedless ned hooks in my opinion. ZMan will never let you down in my opinion.

• 
  @wanderingtrd9382 Жыл бұрын

  Video on the recessed comfort tray would be great, want to install this but not sure how

• 
  @bassbodybuilding2267 Жыл бұрын

  Love the upgrades, quick question, do you still run the live well off the cranking battery? I know stock it runs off of it and alot of people have talked about killing their cranking battery in tournys running their livewells? I appreciate it

• 
  @dougmead7669 Жыл бұрын

  Any recommendations for a good cleaner for my 2023 170? I see Rainx advertised alot?

• 
  @dougmead7669 Жыл бұрын

  What size screws did you use to mount your caddy on the back of the rod locker? Sheet metal screws? Also looking might do this with rod holders in the rod locker, Thanks!!

• 
  @ethanmcnally21 Жыл бұрын

  Can you add a link for those specific brackets for the pro 170?

• 
  @jasonparks389 Жыл бұрын

  I watch a lot of your reviews between the HBC and the ultraview 2 which do you recommend

• 
  @jasonnester9514 Жыл бұрын

  So how do they work ? By putting it in it shortens cable a touch ?

• 
  @anthonyesposito3732 Жыл бұрын

  How does this compare to the fulkrum flex and which do you like better?

• 
  @sebasalonia Жыл бұрын

  Hi!!! I have a solution just a Few days ago. i am having trouble finding center shot. To arrow be parallel to riser gives me like 17mm intead of 20,06 mm. To close to riser. Also my top CAM seems with lean at full draw. Bottom one is perfect. What would you recomend. Sorry my english

• 
  @sebasalonia Жыл бұрын

  I tried Moving cams all the way left and not even close 13/16

• 
  @sawyersmallwood12869 ай бұрын

  My arrow is pointed way off to the side when sitting in the rest

• 
  @archerash6695 Жыл бұрын

  I agree. Top half the burger hole

• 
  @dougmead7669 Жыл бұрын

  Is there room for the second battery addition in the battery compartment? or had it mounted some where else? And if acid or lithium? I'm getting ready to add a second 12 volt too, Thanks!

• 
  @brandonpatterson5705 Жыл бұрын

  One of the most underrated part of that release is the ability to dry fire it without firing your bow. So you can really work on target panic by going through a shot and see you reaction at the shot. Also it will also help you with pin float

• 
  @jayminer9416 Жыл бұрын

  Did you ever get the EnVision?

• 
  @tomp3146 Жыл бұрын

  ps. Great shirt my friend. Retired grunt / 27 years active duty. Stay safe.

• 
  @tomp3146 Жыл бұрын

  Fantastic stuff! I own a 2020 175 and my trusty 2017 170. Going to upgrade both this spring. Awesome Ideas. Thank you

• 
  @jeffstevens1826 Жыл бұрын

  Please take your goat and set up as hinge release and give your review just on that.

• 
  @troykoch6467 Жыл бұрын

  Love the set up. Where did you run the wires to the front of the boat? I have an older 2019 with no decking in front of the center console and I can’t find a way to completely hide the wires

• 
  @craigholland2274 Жыл бұрын

  Any difference in feel from sr6 vs solution? I have an sr6 and don't know if it's something to consider.

• 
  @coachMiguelfishing Жыл бұрын

  What’s your top speed with adding the poles

• 
  @Texaslivinoutdoors Жыл бұрын

  I’m sure the edge of your wraps were hitting it also

• 
  @DamonDowning1 Жыл бұрын

  what did you use for the protective padding on the top of the back covers?

• 
  @justinpbrochu Жыл бұрын

  Quality content man, thank you!

• 
  @jasonparks389 Жыл бұрын

  How does the sigma compare the the apex in size