Пікірлер

• 
  @dustpanfryingpan3 күн бұрын

  Does this fit the 4D ?

• 
  @framesandgear12 күн бұрын

  No, the 4D is not an aerobar so you would need to fit our mount to the stem holding the 4d. You can send us an email with images and we can help you out. Cheers

• 
  @Klatrevalross11 күн бұрын

  Not compatible with Sram?

• 
  @framesandgear111 күн бұрын

  Hi, no it is only for Shimano. Cheers

• 
  @FilipeAlberto-es6yi13 күн бұрын

  if the bike crashes can this damage the frame? isn't the function of the OE derailleur hanger to bend and absorb the energy?

• 
  @framesandgear112 күн бұрын

  Hi. On a side impact, it bends. It is stiff in terms of "frame towards the cog," but on a side hit it bends. We have a couple of ambassadors who eventually crashed and only the hanger bent, nor problems with the frame. Cheers

• 
  @obrienwspt8524 күн бұрын

  Is this big enough to fit the Garmin 1050?

• 
  @kristofferlerche74123 күн бұрын

  Yes, we have a slightly longer arm we can add for 1050.

• 
  @johnseehu3143Ай бұрын

  🤩🤩🤩 yes, pretty nice

• 
  @JansenNascimentoАй бұрын

  Hello, do you know the model fit in Swift racevox evo?

• 
  @framesandgear1Ай бұрын

  Hi, Send us an email at [email protected] Cheers

• 
  @dreycastroАй бұрын

  It’s sold out lol

• 
  @framesandgear1Ай бұрын

  Yes, currently sold out but should be restocked next week. Send us an email at [email protected] then we will make sure to notify you once back in stock. Cheers

• 
  @BensonWesleyАй бұрын

  I have a garmin edge 1040 solar and the extended battery for tje device. Can I add the battery mount to the bottom and have it work?

• 
  @borasumer2 ай бұрын

  $90 for a mount is insane.

• 
  @framesandgear12 ай бұрын

  Hello, 65 EUR is approx 70 USD. For your info, CNC cutting aluminum is far more expensive than 3D printing, besides, a lot of development work also lies within this price. And this mount is very strong, meaning it wont snap with your computer on it. 70 USD is including everything also shipping to the US. Finally, I would argue the price is relatively low compared to a new S-Works SL8 which is about 14.000 USD. But hey, there are definely cheaper alternatives out there, but i have experienced them snapping myself. Cheers Kris/ Framesandgear

• 
  @domenicospano7782 ай бұрын

  Does it work with the deda Vinci spacers?

• 
  @salamelvisual62702 ай бұрын

  Exaclty the one I need ! In dont understand why they dont do it from tge start ...

• 
  @framesandgear12 ай бұрын

  Available and ready to ship right now. Cheers!

• 
  @MrPhil5292 ай бұрын

  Can’t wait to get mine 😊

• 
  @framesandgear12 ай бұрын

  Hope you will be satisfied with it! Cheers

• 
  @oliverstelzhammer63722 ай бұрын

  Hello. Is it possible to mount the Garmin Quick Lock adapter on the bottom of this mount?

• 
  @framesandgear12 ай бұрын

  Hello. Yes!

• 
  @oliverstelzhammer63722 ай бұрын

  Are you sure? Because to me it looks like the Quick Lock adapter on the bottom uses the same holes as the adapter on the top.

• 
  @framesandgear12 ай бұрын

  @@oliverstelzhammer6372 Yes, you fit it on the other holes (horisontal) and then the quick lock system can be split and reassembled 90 degrees also, if that makes sense. Cheers

• 
  @markokitzing42912 ай бұрын

  I might need one soon. Just attached the replacement for the first Garmin mount which broke after a couple of rides. If the replacement also breaks, I will get one of yours.

• 
  @terryloewenberg27642 ай бұрын

  would the same mount be compatible with the Garmin Varia 515 radar unit? The tabs are at 3 and 8 o'clock not top and bottom as on the Edge computers.

• 
  @jhayr19872 ай бұрын

  I want one of this. Link pls.

• 
  @framesandgear12 ай бұрын

  framesandgear.com/products/specialized-tarmac-sl7-integrated-mount-for-garmin-2?_pos=3&_psq=tarmac+sl&_ss=e&_v=1.0

• 
  @jhayr19872 ай бұрын

  @@framesandgear1 thank you

• 
  @SonerAktas3 ай бұрын

  Can i use them with sram?

• 
  @framesandgear13 ай бұрын

  Hi, no these are only applicable to Shimano. Cheers

• 
  @arterr633 ай бұрын

  I too send a link its fitn for model F disc?

• 
  @framesandgear13 ай бұрын

  Yes fits model F.

• 
  @mikelim25763 ай бұрын

  Can you share STL File?

• 
  @misterdapper7543 ай бұрын

  Hello, are the fitting bolts titanium? Or what material are they. Thank you.

• 
  @framesandgear13 ай бұрын

  Steel, But we offer titanium bolts also.

• 
  @tualatindjep3 ай бұрын

  I would love to see what this looks like mounted on a Cervelo stem, with a Wahoo ROAM computer.

• 
  @framesandgear13 ай бұрын

  Send me an email at [email protected] I should be able to send you one.

• 
  @HeyWattsUpCycling4 ай бұрын

  weight?

• 
  @framesandgear14 ай бұрын

  About 28 grams.

• 
  @youbfigas4 ай бұрын

  Will it work with new 3T More Integrale stem?

• 
  @framesandgear14 ай бұрын

  Hi, No it will not. But we are making the mount for the MORE. It should be ready in about 1 month. Cheers

• 
  @youbfigas4 ай бұрын

  @@framesandgear1 Thank you. Great! Pls make short version for Garmin 840 :)

• 
  @youbfigas2 ай бұрын

  @@framesandgear1do you already have it?

• 
  @framesandgear12 ай бұрын

  @@youbfigas first samples are ready, send us an email at [email protected] to be notified once final version is ready. Cheers

• 
  @antongilbert81065 ай бұрын

  Does this fit the 2020 model Allez Sprint?

• 
  @johnm44285 ай бұрын

  Compatible avec un wahoo Roam ?

• 
  @framesandgear15 ай бұрын

  Hi No only Bolt this one.

• 
  @Paddystyx6 ай бұрын

  Can I use this on the Deda Superbox? Thank you.

• 
  @framesandgear16 ай бұрын

  Hi, no you need a Superbox mount that has 28 mm distance, Superzero has 27. Available here: framesandgear.com/products/framesandgear-deda-superbox-garmin-mount-medium?_pos=1&_psq=superbox&_ss=e&_v=1.0 If you want the long one send me an email [email protected] ill make one for you.

• 
  @Paddystyx6 ай бұрын

  @@framesandgear1 hi , I will send an email right now. Thank you.

• 
  @lenzirodrigo136 ай бұрын

  Hey when is going to be in stock again?

• 
  @framesandgear16 ай бұрын

  Hi, it should be in the end of January. Stay tuned on the shop. Cheers

• 
  @lenzirodrigo135 ай бұрын

  @@framesandgear1 I still see no stock, there a way I can pre order?

• 
  @EddyCat12347 ай бұрын

  Hi, when will this become available again?

• 
  @framesandgear16 ай бұрын

  In stock now.

• 
  @kdub05299 ай бұрын

  Mine came with only the Garmin mount. Was it supposed to also have a Wahoo mount?

• 
  @framesandgear19 ай бұрын

  Hi, No it comes with either Garmin or Wahoo depending on which one you buy on our shop. You can however shop extra insert kits on the shop under the "Inserts" tab. Cheers

• 
  @kirilligusev9 ай бұрын

  So I can add this to my (your brand) Cervelo S5 computer mount so I could put the light?

• 
  @framesandgear19 ай бұрын

  Hi, yes you can. Cheers

• 
  @kirilligusev9 ай бұрын

  @@framesandgear1 perfect! Just ordered one so I could add a light for my night rides.

• 
  @framesandgear19 ай бұрын

  Thx🙏

• 
  @emabia7211 ай бұрын

  Have you tested the mount for vibrations? I have the feeling the 2 screws could lose. What can you tell me about it?

• 
  @TheHatchattack311 ай бұрын

  why cant i find this on the 3T site?

• 
  @framesandgear111 ай бұрын

  HI There, it is right here: framesandgear.com/products/3t-apto-stealth-garmin-mount-integrated-mounts?_pos=1&_psq=3t+apt&_ss=e&_v=1.0

• 
  @marcinbuczak123211 ай бұрын

  Good product! I had concerns due to the high price and shopping in another country. However, the goods arrived and the store service was super. When I change the navigation the biggest, buys another one. Fit to the bike perfect, really worth it. And most importantly the seller contact and helpful.

• 
  @framesandgear111 ай бұрын

  Hi Marcin, Thanks for the comment. Yes we are not the cheapest, but we also spend some time and money on a delivering a hopefully high quality product. And yes, shipping is included in all prices so that adds a little to it. I hope you will enjoy the SMR mount! Best, Kris/ Framesandgear

• 
  @rolandchua9837 Жыл бұрын

  Where can I order the garmin holder?

• 
  @framesandgear1 Жыл бұрын

  Hi Link is in the description. Here: framesandgear.com/products/framesandgear-colnago-c68-mount

• 
  @kdub0529 Жыл бұрын

  I just ordered one.

• 
  @Robert-uo5bs Жыл бұрын

  Is there a foil compatible front mount that also allows for connecting a garmin varia light?

• 
  @framesandgear1 Жыл бұрын

  Hi, you can add the Framesandgear GoPro mount below, and if you have an adapter for the Garmin Varia light/ if it fits via GoPro it should fit spot on. Cheers

• 
  @migass Жыл бұрын

  Hello, why is this mount heavier than the adjustable one (with 28grs) since the adjustable mount has bolts...?

• 
  @framesandgear1 Жыл бұрын

  Hi Send me an e-mail on [email protected] and we can clarify the details. Cheers

• 
  @johnbrown7944 Жыл бұрын

  how long does shipping usually take to the US? Virginia?

• 
  @framesandgear1 Жыл бұрын

  Hi, Ususally 5-7 business days max. We have many customers in the US. Cheers, Kris

• 
  @huseyinsubasi7 Жыл бұрын

  Hi, I couldn't see the new go pro mount @0:56 on your website. Just found classic go pro add on. Can you help me ?

• 
  @framesandgear1 Жыл бұрын

  Hi! It is not available yet. Working on the final touch of it. Cheers

• 
  @peterwilson1831 Жыл бұрын

  if I want the unit that places my Elemnt Roam as close to the knot bar as possible (no gaps). Which model should I go for?

• 
  @kristofferlerche741 Жыл бұрын

  I know that the Garmin Explore 2 sits absolutely spot on on the Medium/short version. If you measure your Roam (and find the Explore 2 measurements online) you can tell. If the Roam is longer than the Explore 2, i would go for the long version of this mount. Cheers

• 
  @kristofferlerche741 Жыл бұрын

  I just checked it - medium is OK for Roam.

• 
  @robbarmstrong8702 Жыл бұрын

  Wow!! Very nice. I saw this on eBay and was worried if my 1030 would fit the mount but you jus answered that. I just placed my Order, 🙂 #RobbArmstrong

• 
  @kristofferlerche741 Жыл бұрын

  Hello, Thanks for the order! And yes, 1030+1040 will fit perfectly. Cheers, Kris/ Framesandgear

• 
  @nicuuz Жыл бұрын

  whats the distance from mid hole to mid hole on the stem? i need a mount for my vision acr stem 😅

• 
  @framesandgear1 Жыл бұрын

  Hi! Send me an email at [email protected] - Then we can investigate it easier. Thanks, Kris

• 
  @nicuuz Жыл бұрын

  whats the gap between the holes for the stem? im wondering if it fits the vision acr carbon stem?

• 
  @charlesmansplaining Жыл бұрын

  In the looks department it's not going to do much for an already ugly frame with those blobs of weld at the junctions. People who buy that frame are only buying it for the purpose of racing and don't care what the bike looks like.

• 
  @framesandgear1 Жыл бұрын

  Hi, as a previous Allez Owner myself, I would say I actually bought it because of its sturdy looks. Still, I think it was completed with a smooth headset cover. /Kris

• 
  @mariosimas Жыл бұрын

  i have one. perfect fit 🙂

• 
  @framesandgear1 Жыл бұрын

  Thanks, Mario!

• 
  @huseyinsubasi7 Жыл бұрын

  Hi ! How many grams can i save compared to the factory tarmac sl7 original mount ? Can you tell me :)

• 
  @framesandgear1 Жыл бұрын

  Hi I do not know the factory Specialized weight. But ours is super strong.

• 
  @watts_not_found Жыл бұрын

  Have this installed on my SSE. It's great but could use more tilt adjustability

• 
  @framesandgear1 Жыл бұрын

  Thanks for the feedback. Currently it is 6 Degrees. Kris

• 
  @Guillermo2505 Жыл бұрын

  How the adjustment works?

• 
  @yonglingng5640 Жыл бұрын

  Any plans on making a version for mechanical groupsets? Like the one that came with Tarmac SL7s. Or is the material too thin for two more holes?

• 
  @framesandgear1 Жыл бұрын

  I think it is doable, will note it down on our possible products list. We will post it on our IG "framesandgear" if/ when it is made.

• 
  @beanbaguk Жыл бұрын

  Do you offer support for the Garmin quarter turn adapter?

• 
  @framesandgear1 Жыл бұрын

  Will be added as an option within the next month.

• 
  @beanbaguk Жыл бұрын

  @@framesandgear1 I can't wait!

• 
  @aidancarson2853 Жыл бұрын

  So how do you fit it?

• 
  @framesandgear1 Жыл бұрын

  There is a hole in the front cap of you Barfly / SL 7 stem. You fit it there, and add the front cap again.

• 
  @aidancarson2853 Жыл бұрын

  @@framesandgear1 thank you 👍🏻