Bro, you got a big pause in between the video and then all of a sudden your motor is not ticking anymore…really bro??!! Let me guess…you sell SeaFoam 🤣🤣🤣
@QualityKingChris16 сағат бұрын
Believe or don’t, yes there’s about 45 minutes in between. I put seafoam in then let it idle for a while.
@QualityKingChris16 сағат бұрын
@@SoloNinja253 and no I don’t sell seafoam. Seafoam doesn’t pay me for anything.
@seanz4014 күн бұрын
Will a better spark plug actually do anything
@QualityKingChris4 күн бұрын
@@seanz401 probably not unless yours is worn out
@seanz4014 күн бұрын
Okay so smaller or less teeth sprocket equals what more torque or acceleration? And larger or more teeth equals more top speed or?
@QualityKingChris4 күн бұрын
@@seanz401 this is 100% stock besides KP Moto Club exhaust
@QualityKingChris4 күн бұрын
@@seanz401 larger front # more top speed less tq
@seanz4013 күн бұрын
@@QualityKingChris and what's a less teeth front sprocket gonna do?
@seanz4014 күн бұрын
So stock its a 15 tooth sprocket and you put a 16 tooth?
@seanz4014 күн бұрын
Whats those led clear lens things on the front bearings? Right under the turn signals in the front? What are those? And what's the clear lens square in the tail light do?
@dennisbishop82965 күн бұрын
I’m about to change front sprocket to 17 tooth change chain and tires and the kp exhaust with nibbi 26 mm carb. We will see how it goes.
@QualityKingChris5 күн бұрын
Awesome
@visionaireescapesmediagrou9177 күн бұрын
Transparency... I don't have a jack lift like you're showing. Is there a way around that, that you would advise? I do have garage rails and some straps....
@QualityKingChris7 күн бұрын
Just something to hold it up while you install the front wheel.
@visionaireescapesmediagrou9177 күн бұрын
@@QualityKingChris cool, so even if I just rig something up under the base of the scooter you think that would be sufficient? Do you think it would be too heavy to put on my garage track? My apologies for all the questions it got delivered and I'm at work now so I'm trying to prep myself for when I get off...
@QualityKingChris7 күн бұрын
Yea just whatever it takes.
@Adrianm18218 күн бұрын
hey i just bought the gen 5 maddog and am having trouble with the front tire install, i dont know where the spacers go, does the longer one go on the right side with the brake caliper or does the short one go on that side?
@octyl959 күн бұрын
you do realize your not supposed to run your engine with the oil cap off right 😭
@TwoSmoker42011 күн бұрын
Where did you order it from?
@AyanAcosa-mc5jm13 күн бұрын
It’s a Kia what do u expect.
@KALIEFBARKSDALE13 күн бұрын
Seafoam does work but this video sucks
@mghuertas14 күн бұрын
Thats a shitty 5000 miles oil interval sounds after many miles
@Fence-Dogs-More14 күн бұрын
If your tick ain’t an injector
@gladperson11615 күн бұрын
Except it doesnt... maybe thats why that engine is blown lol
@QualityKingChris15 күн бұрын
@@gladperson116 nope it runs great
@ProZvx16 күн бұрын
So cool i really want one but I can’t buy it yet😢
@bradhollis412616 күн бұрын
I got mine going 78
@shanestout354316 күн бұрын
As a mechanic I would hate to say it but it sounds like you substituted the seafoam for the missing 3/4 of a quart of oil
@RelentlessBR17 күн бұрын
As far as the crank case goes seafoam to clean and prolube for all the other stuff.
Sea foam works well to displace water in fuel tank.
@user-fb4qg5qv6e22 күн бұрын
Brand new
@babaganoosh196923 күн бұрын
Yeahhh I made the mistake of leaving the bolts and nuts from the package cage around trying to figure out where they went on the scooter...lol...not a fun time
@isnowyazn26 күн бұрын
The sludge, varnish, buildup, whatever, by the oil filler/cap area, is a telltale sign of what that engine’s been through… You definitely might wanna “flush” it yourself, by draining and filling twice; maybe even using “motor oil flush” formulas, if you’re certain you don’t have a leak. Those are the only circumstances I’d recommend using an engine “flush” formula under. Some engines are just naturally loud when cold starting. Running a thinner oil with the cold weight reduced, can really really help; but decreasing in increments of like -5W at most (ex: 5w-30 to 0w-30). I wouldn’t bother running thicker oil if you increase the cold weight, bc it would just stress the engine during startup, and during the warmup phase. Full synthetic motor oil is highly recommended, and semi-synthetic is like even more readily available than TRYING to find a conventional motor oil, nowadays… If you want, you could use stuff like oil stabilizer; but like I said, it’s more of a band-aid, although probably less damaging than trying to run thicker motor oil.
@QualityKingChris26 күн бұрын
This is super common on this generation of Kia engines, I’m not 100% sure I know what it is but initially the top of the engine was dry like poor oil flow… after an hour or so of running with seafoam it was flowing well.
@Mike-_D27 күн бұрын
An old timer once told me put one in the pink and two in the stink. Back when gas used to be pink. Wait what are we talking about again?
@jdmtechllc6589Ай бұрын
16 oz. of dexron 6 ATF 1-200 miles before every other oil change 👍🏽
@bdetert82Ай бұрын
lol engine just warmed up only way seafoam would do that is if it didn't have enough oil. Seaform is for cleaning out combustion chamber and well oil shouldn't really be in the combustion chamber unless the valve seals and piston rings are worn.
@jonathanwatts7658Ай бұрын
What is the name of those tires?
@QualityKingChrisАй бұрын
ACP
@jondoe7528Ай бұрын
No kia's suck
@Because223Ай бұрын
Sea foam actually works well
@QualityKingChrisАй бұрын
Yes it does!
@limedime03Ай бұрын
Too many cuts in the video to be believable
@QualityKingChrisАй бұрын
I’m not here to convince you. Just facts here.
@1sinister80Ай бұрын
Cut to a different engine
@QualityKingChrisАй бұрын
No it wasn’t. Same engine about an hour later.
@1sinister80Ай бұрын
@@QualityKingChris Sure 😉
@israelvibrations100Ай бұрын
I think seafoam cleaned so well the sludge..lubricated everything but contaminated everything with sludge
@israelvibrations100Ай бұрын
That what happened to my corolla...cleaned the engine so well it accully started making more noise because now there are wider gaps in the over all parts of the engine like gears, springs, rocker arms, tappits...gear box valves, piston rings so on and so on, So since it cleaned incredibly well, I had to use Lucas Engine Oil Stablilizer and and slightly thicker oil from 5w-30 to 10w-30....so really to avoid all this additives cleansers so just change your oil ever 3 to 5000 miles you be good for life of the engine
@jay915jayАй бұрын
The noise is coming from it not having a cap on. As I was watching this I was hoping this person wouldn’t try and play it off as if the product had worked so well when it was the oil cap the entire time. 🤦🏻♂️
@QualityKingChrisАй бұрын
Nope,
@contreposicionАй бұрын
Fliechender Uwe: "abends will ich dann nur noch absaften"
@yoannysgarcia8511Ай бұрын
Eso está mal!!, es 1oz por cada 4to de aceite si te pasas de cantidad degradas demasiado el aceite y puedes dañar el motor, 5oz x 5cuartos y se conduce unas 200 millas y se hace otro cambio de aceite nuevo....
@user-he1xq5jn7eАй бұрын
this is what happens when you don't change your oil!! I know people who take years to change them because they are stingy and supposedly. change oil every 10000km and you will never get anything wrong. and of course
@byronmitchell13Ай бұрын
I’ve seen the good, the bad , and the ugly reviews on this stuff. lol. Project farm on you tube does a great review of engine cleaners. The one thing about all these products is that with regular use you usually won’t notice a difference. However if your engine is having problems you will notice a difference.
@jimjab3631Ай бұрын
Suppose to go in the fuel tank
@QualityKingChrisАй бұрын
Have you ever read the directions?
@CruizerdoesitАй бұрын
U got another one what color is your fav
@QualityKingChrisАй бұрын
The sapphire blue is probably my favorite.
@CruizerdoesitАй бұрын
@@QualityKingChris I think that's all that's left is blues and orange unless u get efi
@QualityKingChrisАй бұрын
@@Cruizerdoesit when I sell a few more of these I’ll get the EFI ones.
@Spacecruizer203Ай бұрын
They sell quick @@QualityKingChris
@frederickburns1739Ай бұрын
According to lab test,dynamometer test and Lake Speed you just shortened the life of that engine. After market additives like cocaine/herion/LSD feel good at the time but end results QUESTIONABLE!?!?!?
@QualityKingChrisАй бұрын
Regardless of whatever anyone says… it works for what I used it for. In my opinion it lengthened the life of the engine considering it was basically junk to start with and now 60k miles later still alive and well.
@ggsupplies310Ай бұрын
How is the quality on these bikes after a few months to a year?
@QualityKingChrisАй бұрын
These are a new design so only time will tell, so far so good.
@rcgamerАй бұрын
Min e has a plug of some kind in the seat compartment. Where does it go
@QualityKingChrisАй бұрын
I can look tomorrow, might be the diagnostic plug…
@rcgamerАй бұрын
Wow, thanks a lot
@rcgamerАй бұрын
what side does each spacer go on?
@QualityKingChrisАй бұрын
Made a short for you!
@rcgamerАй бұрын
Honestly, I cannot hear a word you're saying in this video
Пікірлер
Bro, you got a big pause in between the video and then all of a sudden your motor is not ticking anymore…really bro??!! Let me guess…you sell SeaFoam 🤣🤣🤣
Believe or don’t, yes there’s about 45 minutes in between. I put seafoam in then let it idle for a while.
@@SoloNinja253 and no I don’t sell seafoam. Seafoam doesn’t pay me for anything.
Will a better spark plug actually do anything
@@seanz401 probably not unless yours is worn out
Okay so smaller or less teeth sprocket equals what more torque or acceleration? And larger or more teeth equals more top speed or?
@@seanz401 this is 100% stock besides KP Moto Club exhaust
@@seanz401 larger front # more top speed less tq
@@QualityKingChris and what's a less teeth front sprocket gonna do?
So stock its a 15 tooth sprocket and you put a 16 tooth?
Whats those led clear lens things on the front bearings? Right under the turn signals in the front? What are those? And what's the clear lens square in the tail light do?
I’m about to change front sprocket to 17 tooth change chain and tires and the kp exhaust with nibbi 26 mm carb. We will see how it goes.
Awesome
Transparency... I don't have a jack lift like you're showing. Is there a way around that, that you would advise? I do have garage rails and some straps....
Just something to hold it up while you install the front wheel.
@@QualityKingChris cool, so even if I just rig something up under the base of the scooter you think that would be sufficient? Do you think it would be too heavy to put on my garage track? My apologies for all the questions it got delivered and I'm at work now so I'm trying to prep myself for when I get off...
Yea just whatever it takes.
hey i just bought the gen 5 maddog and am having trouble with the front tire install, i dont know where the spacers go, does the longer one go on the right side with the brake caliper or does the short one go on that side?
you do realize your not supposed to run your engine with the oil cap off right 😭
Where did you order it from?
It’s a Kia what do u expect.
Seafoam does work but this video sucks
Thats a shitty 5000 miles oil interval sounds after many miles
If your tick ain’t an injector
Except it doesnt... maybe thats why that engine is blown lol
@@gladperson116 nope it runs great
So cool i really want one but I can’t buy it yet😢
I got mine going 78
As a mechanic I would hate to say it but it sounds like you substituted the seafoam for the missing 3/4 of a quart of oil
As far as the crank case goes seafoam to clean and prolube for all the other stuff.
and help moto slug from oil to pan to drain
will take slug out of oil pan when drain
Hi! Where you buy the rear shocks mount?
allprooffroad.com/110046-1-kitshock-mount-kit-pair.html
Is that a misfire??
@@JohnDelson no
Sea foam works well to displace water in fuel tank.
Brand new
Yeahhh I made the mistake of leaving the bolts and nuts from the package cage around trying to figure out where they went on the scooter...lol...not a fun time
The sludge, varnish, buildup, whatever, by the oil filler/cap area, is a telltale sign of what that engine’s been through… You definitely might wanna “flush” it yourself, by draining and filling twice; maybe even using “motor oil flush” formulas, if you’re certain you don’t have a leak. Those are the only circumstances I’d recommend using an engine “flush” formula under. Some engines are just naturally loud when cold starting. Running a thinner oil with the cold weight reduced, can really really help; but decreasing in increments of like -5W at most (ex: 5w-30 to 0w-30). I wouldn’t bother running thicker oil if you increase the cold weight, bc it would just stress the engine during startup, and during the warmup phase. Full synthetic motor oil is highly recommended, and semi-synthetic is like even more readily available than TRYING to find a conventional motor oil, nowadays… If you want, you could use stuff like oil stabilizer; but like I said, it’s more of a band-aid, although probably less damaging than trying to run thicker motor oil.
This is super common on this generation of Kia engines, I’m not 100% sure I know what it is but initially the top of the engine was dry like poor oil flow… after an hour or so of running with seafoam it was flowing well.
An old timer once told me put one in the pink and two in the stink. Back when gas used to be pink. Wait what are we talking about again?
16 oz. of dexron 6 ATF 1-200 miles before every other oil change 👍🏽
lol engine just warmed up only way seafoam would do that is if it didn't have enough oil. Seaform is for cleaning out combustion chamber and well oil shouldn't really be in the combustion chamber unless the valve seals and piston rings are worn.
What is the name of those tires?
ACP
No kia's suck
Sea foam actually works well
Yes it does!
Too many cuts in the video to be believable
I’m not here to convince you. Just facts here.
Cut to a different engine
No it wasn’t. Same engine about an hour later.
@@QualityKingChris Sure 😉
I think seafoam cleaned so well the sludge..lubricated everything but contaminated everything with sludge
That what happened to my corolla...cleaned the engine so well it accully started making more noise because now there are wider gaps in the over all parts of the engine like gears, springs, rocker arms, tappits...gear box valves, piston rings so on and so on, So since it cleaned incredibly well, I had to use Lucas Engine Oil Stablilizer and and slightly thicker oil from 5w-30 to 10w-30....so really to avoid all this additives cleansers so just change your oil ever 3 to 5000 miles you be good for life of the engine
The noise is coming from it not having a cap on. As I was watching this I was hoping this person wouldn’t try and play it off as if the product had worked so well when it was the oil cap the entire time. 🤦🏻♂️
Nope,
Fliechender Uwe: "abends will ich dann nur noch absaften"
Eso está mal!!, es 1oz por cada 4to de aceite si te pasas de cantidad degradas demasiado el aceite y puedes dañar el motor, 5oz x 5cuartos y se conduce unas 200 millas y se hace otro cambio de aceite nuevo....
this is what happens when you don't change your oil!! I know people who take years to change them because they are stingy and supposedly. change oil every 10000km and you will never get anything wrong. and of course
I’ve seen the good, the bad , and the ugly reviews on this stuff. lol. Project farm on you tube does a great review of engine cleaners. The one thing about all these products is that with regular use you usually won’t notice a difference. However if your engine is having problems you will notice a difference.
Suppose to go in the fuel tank
Have you ever read the directions?
U got another one what color is your fav
The sapphire blue is probably my favorite.
@@QualityKingChris I think that's all that's left is blues and orange unless u get efi
@@Cruizerdoesit when I sell a few more of these I’ll get the EFI ones.
They sell quick @@QualityKingChris
According to lab test,dynamometer test and Lake Speed you just shortened the life of that engine. After market additives like cocaine/herion/LSD feel good at the time but end results QUESTIONABLE!?!?!?
Regardless of whatever anyone says… it works for what I used it for. In my opinion it lengthened the life of the engine considering it was basically junk to start with and now 60k miles later still alive and well.
How is the quality on these bikes after a few months to a year?
These are a new design so only time will tell, so far so good.
Min e has a plug of some kind in the seat compartment. Where does it go
I can look tomorrow, might be the diagnostic plug…
Wow, thanks a lot
what side does each spacer go on?
Made a short for you!
Honestly, I cannot hear a word you're saying in this video
Sorry I’m a rookie videographer
Need to change your oil more often
No way, I use lifetime oil!