Well done man that’s not easy a bit stressful for sure. Is that a radio link?
@D.J_RC27 күн бұрын
It’s a rush for sure. 😆 Yes it’s a Radiolink, great radio so far.
@01581Cody28 күн бұрын
I have no clue how you can see it while hauling butt!!
@D.J_RC28 күн бұрын
The hardest part is seeing it when you turn it around and hope it’s pointing in the right direction. 😝
@benjaminliptonjr9329Ай бұрын
First like first comment!! lol wifey asks how the hell to you control it let alone see it when they are going that fast?! Im digging the infraction body big time! Breaking the 100mph like its light work! Keep up the great content brother!
@D.J_RC29 күн бұрын
Thanks brother. I’ve been over 140 with my limitless so 120 is a breeze. 😂 The truck is dialed in so it basically just stays straight on it’s own. Body paint done by AJ’s Custom RC painting.
@ICRC83Ай бұрын
That's crazy fast! Sorry about the 🔥. Nice video!
@D.J_RCАй бұрын
Thanks 👍
@allenirwin698Ай бұрын
Congratulations .I might have to build me a speed run rc. I don't know if my infraction mega with traxxas 6s e revo system in it will get me close to 100mph
@D.J_RCАй бұрын
I gave up on the 1/8 Infraction build, it just wouldn’t track straight. My Slash and my Arrma’s are like they’re on rails.
@treydouglas139Ай бұрын
Yeaaaa buddy get it done
@D.J_RCАй бұрын
She all rebuilt and ready to go again. 🤘🏻💪🏻👊🏻
@melambuletteАй бұрын
100 feet where not up!!
@thatsmyrcАй бұрын
Great test run was this on 12s or 8? Reason asking is I’m building one now that I blew the motor in. My other is still nitro. I’m setting it up to run stock spur and 18 pinion for testing
@D.J_RCАй бұрын
XLX2 with an 800kv so 8S. More than enough power with the right gearing.
@thatsmyrcАй бұрын
@@D.J_RCawesome man thanks for the tip. I’ve got the max5 g2 800kv system. Just got done switching all the center & drive diff oil. Replaced all the diff cups also while I was in there with aluminum.
@thatsmyrcАй бұрын
@@D.J_RC awesome buddy thanks for the input, I’m going with 8s then 👍🏼
@solorider-gq2pl3 ай бұрын
thanks!!!!
@D.J_RC3 ай бұрын
You’re welcome!👊🏻🤘🏻
@TCCustoms063 ай бұрын
I was told it's for the spring spaces on your shocks..... it slides on the little tab that sticks out and you can just pop them out. Much quicker than fighting with them with your fingers or pushing them off from the opposite side.
@D.J_RC3 ай бұрын
This is what it was intended for but it definitely has a couple uses. Thanks for watching. 👊🏻
@aaronschmitt21203 ай бұрын
It's also a turn buckle wrench, not a good one but it is the right size
@Tonyf744 ай бұрын
Post more about this please
@D.J_RC4 ай бұрын
I no longer own this one. Great buggy though, definitely miss it.
@Tonyf744 ай бұрын
@@D.J_RC I just brought one still brand new from 2009 it’s make me wanna start a channel
@D.J_RC4 ай бұрын
@@Tonyf74 first thing you should do is get it out of the box and get the engine broken in properly. You could make your first video about that. 🤘🏻👊🏻
@scion-dj4he4 ай бұрын
I have three nitros mutilator's and one roller. This things are a beast, nitros or brushless 👍🏼👌🏽
@BigWillieFPV4 ай бұрын
Nice vid bro, How it’s going now after several months in the truck, was looking at the anodised cranks but also thinking stock plastics may still be better having flex, would you still use them or stick with the stock ones? Thanks
@D.J_RC4 ай бұрын
I would absolutely recommend this set up man. I’m happy with how it steers and the way it’s been holding up.
@lookmaanjuman28484 ай бұрын
Where can i get this sway bar kit to buy i am tired looking for it if anyone can help me i thank you
@D.J_RC4 ай бұрын
a.co/d/aJdVx7j
@D.J_RC4 ай бұрын
a.co/d/01kVTBJ
@smservicetech6095 ай бұрын
Nice run !
@D.J_RC5 ай бұрын
Thanks! 👊🏻
@jaymitchrc5 ай бұрын
Nice rig bro!
@D.J_RC5 ай бұрын
Thanks man. 👊🏻
@thierryc.83605 ай бұрын
💯% Traxxas UDR 🇨🇵 France 🇲🇫 RC😊👍
@ACLMSC6 ай бұрын
I have a stock mutilator that is very quick and sounds great but this conversion is awesome.
@D.J_RC6 ай бұрын
Tekno makes or made, not sure if they still do to be honest, some of the best conversion kits back in the day.
@gwizzfpv67416 ай бұрын
Ace video i just got one ,is there a way too programme the esc
@D.J_RC6 ай бұрын
If you have that exact same Esc you can program it the same way you would with most Castle Esc’s. Their program card or Castle Link.
@gwizzfpv67416 ай бұрын
Ace thanks for that have a good new year
@stevehudd91896 ай бұрын
There a great car them love mine ❤️
@ohbboogey1667 ай бұрын
More like 10ft
@D.J_RC7 ай бұрын
🤣🤣🤣🤣🤣🤣🤣🤡🤡🤡🤡🤡
@richardgiambra87717 ай бұрын
Truly an exceptional instructional video! Really appreciate the camera view showing which screws you were taking out, and the lining up of the parts! You also saved me a ton of time by doing it without ripping the X=Maxx apart! I really appreciated it!! -God bless
@D.J_RC7 ай бұрын
You're welcome. Thanks for subscribing and watching.
@bigwhop1369 ай бұрын
Hey, bro, nice video. Do you think you have an extra hawk body for sale? As I have a chassis but I have no body. Keep up the great content.
@D.J_RC9 ай бұрын
Thanks man! I will look around the basement. If I find anything I'll hit you up on Facebook.
@originalrcfun73689 ай бұрын
Picking one up soon. Believe it is a kit verson bc it has Futaba radio. Can't wait 🙂
@D.J_RC9 ай бұрын
Awesome!!! Enjoy it!
@buffernickel10 ай бұрын
NOT EVEN CLOSE TO 100ft
@D.J_RC10 ай бұрын
🤣🤣🤣🤣🤣🤣🤣🤦🏼♂️
@minthos404510 ай бұрын
Is it true ARRMA 8S stock uses low quality 7075 Chasis ? People say it’s really easy to bent them.
@D.J_RC10 ай бұрын
I have never bent more then just a tiny bit, not enough to affect the performance of the truck.
@jadoriffic11 ай бұрын
Good video. Thanks 👍
@D.J_RC11 ай бұрын
You're welcome
@meudrone4k369 Жыл бұрын
Chique carro baja 🏎🔥💥😎🥰😍👍🏻💪🏼
@D.J_RC Жыл бұрын
Gracias mí amigo!
@Mrclassyduck Жыл бұрын
I love my xmaxx but I olso respect any one that has a diferent opinion
@D.J_RC Жыл бұрын
XMaxx is king!
@allenirwin698 Жыл бұрын
Awesome. The zenoah engine wakes up this Baja. I'm strongly considering getting a g320
@D.J_RC Жыл бұрын
It is definitely a great choice that won't break the bank buddy. Thanks for watching. 🤘🏻👊🏻
@josephsierra7295 Жыл бұрын
Hahahah! Now thats putting the Kraton to good use on the farm! Hahahaah! Hey does the Massey have a tank now?
@D.J_RC Жыл бұрын
No tank yet. A few other thing's jumped in front of that project. Lol
@josephsierra7295 Жыл бұрын
That's just crazy fast! I imagine if you have RC drivers tourettes during that run you'll demolish that rig..Thanks for sharing!
@D.J_RC Жыл бұрын
😂 It doesn't take much to make a mistake, even a tiny swerve at those speeds and everything goes to crap fast. 😝
@RCFPVSTL Жыл бұрын
Kraton has been SENT! Great Video!
@D.J_RC Жыл бұрын
Thank you!
@odaytim8321 Жыл бұрын
Looking good I’m building my outcast to a kraton next week
@richardcaudill935 Жыл бұрын
What's the wheel/tire combo you're running on there?
@D.J_RC Жыл бұрын
Proline Badlands
@odaytim8321 Жыл бұрын
@@D.J_RC did you have to ream the center.
@D.J_RC Жыл бұрын
@@odaytim8321 Yes I did. Set up bit and a dremel to knock down the fake lug nuts.
@odaytim8321 Жыл бұрын
@@D.J_RC Ty for the info I’ll be getting a set so I was wondering if that was needed
@allenirwin698 Жыл бұрын
Nice speed runs. Congrats
@Reddely Жыл бұрын
Super bussin bussin frfr
@wyatt9 Жыл бұрын
No cap no kizzy
@Reddely Жыл бұрын
@@wyatt9 frfr big dog
@josephsierra7295 Жыл бұрын
Fast and beautiful!
@D.J_RC Жыл бұрын
Yes sir!!!
@allenirwin698 Жыл бұрын
David J Leveillee. Your becoming a rc speed demon congratulations.
@D.J_RC Жыл бұрын
It's an addicting part of the rc world for sure!!!
@rock40ps3 Жыл бұрын
that's not a torsion bar...this is called a sway bar... two completely different components
@D.J_RC Жыл бұрын
Thank god you cleared that up. 👍🏻
@D.J_RC Жыл бұрын
Pulled straight from their website... "Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/7th scale Traxxas UDR vehicles. Designed for quick response, this system use a 3mm spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering."
@superchargedcars Жыл бұрын
Sorry brother, Thanks for the great video though!!!
@latviandronelife Жыл бұрын
👍👌cool video
@odaytim8321 Жыл бұрын
Sweet nice job
@D.J_RC Жыл бұрын
Thanks brother
@tonydetwiler2624 Жыл бұрын
Nice nitro all the time for me and gas too just don’t have any gas ones yet
@josephsierra7295 Жыл бұрын
Ya...thats a screamer! Tons of low end torque! Runs like a raped ape! Thanks for sharing!
Пікірлер
Thanks! I installed it in Korea with you.
@@shlee2060 👊🏻 You’re welcome!
That body and setup are insane!😮
@@TRAVELER197 👊🏻 Thank you! 🤘🏻
Nice🏁🏁
👊🏻
Hell yea thing was movin
Yes it was. 😅
Well done man that’s not easy a bit stressful for sure. Is that a radio link?
It’s a rush for sure. 😆 Yes it’s a Radiolink, great radio so far.
I have no clue how you can see it while hauling butt!!
The hardest part is seeing it when you turn it around and hope it’s pointing in the right direction. 😝
First like first comment!! lol wifey asks how the hell to you control it let alone see it when they are going that fast?! Im digging the infraction body big time! Breaking the 100mph like its light work! Keep up the great content brother!
Thanks brother. I’ve been over 140 with my limitless so 120 is a breeze. 😂 The truck is dialed in so it basically just stays straight on it’s own. Body paint done by AJ’s Custom RC painting.
That's crazy fast! Sorry about the 🔥. Nice video!
Thanks 👍
Congratulations .I might have to build me a speed run rc. I don't know if my infraction mega with traxxas 6s e revo system in it will get me close to 100mph
I gave up on the 1/8 Infraction build, it just wouldn’t track straight. My Slash and my Arrma’s are like they’re on rails.
Yeaaaa buddy get it done
She all rebuilt and ready to go again. 🤘🏻💪🏻👊🏻
100 feet where not up!!
Great test run was this on 12s or 8? Reason asking is I’m building one now that I blew the motor in. My other is still nitro. I’m setting it up to run stock spur and 18 pinion for testing
XLX2 with an 800kv so 8S. More than enough power with the right gearing.
@@D.J_RCawesome man thanks for the tip. I’ve got the max5 g2 800kv system. Just got done switching all the center & drive diff oil. Replaced all the diff cups also while I was in there with aluminum.
@@D.J_RC awesome buddy thanks for the input, I’m going with 8s then 👍🏼
thanks!!!!
You’re welcome!👊🏻🤘🏻
I was told it's for the spring spaces on your shocks..... it slides on the little tab that sticks out and you can just pop them out. Much quicker than fighting with them with your fingers or pushing them off from the opposite side.
This is what it was intended for but it definitely has a couple uses. Thanks for watching. 👊🏻
It's also a turn buckle wrench, not a good one but it is the right size
Post more about this please
I no longer own this one. Great buggy though, definitely miss it.
@@D.J_RC I just brought one still brand new from 2009 it’s make me wanna start a channel
@@Tonyf74 first thing you should do is get it out of the box and get the engine broken in properly. You could make your first video about that. 🤘🏻👊🏻
I have three nitros mutilator's and one roller. This things are a beast, nitros or brushless 👍🏼👌🏽
Nice vid bro, How it’s going now after several months in the truck, was looking at the anodised cranks but also thinking stock plastics may still be better having flex, would you still use them or stick with the stock ones? Thanks
I would absolutely recommend this set up man. I’m happy with how it steers and the way it’s been holding up.
Where can i get this sway bar kit to buy i am tired looking for it if anyone can help me i thank you
a.co/d/aJdVx7j
a.co/d/01kVTBJ
Nice run !
Thanks! 👊🏻
Nice rig bro!
Thanks man. 👊🏻
💯% Traxxas UDR 🇨🇵 France 🇲🇫 RC😊👍
I have a stock mutilator that is very quick and sounds great but this conversion is awesome.
Tekno makes or made, not sure if they still do to be honest, some of the best conversion kits back in the day.
Ace video i just got one ,is there a way too programme the esc
If you have that exact same Esc you can program it the same way you would with most Castle Esc’s. Their program card or Castle Link.
Ace thanks for that have a good new year
There a great car them love mine ❤️
More like 10ft
🤣🤣🤣🤣🤣🤣🤣🤡🤡🤡🤡🤡
Truly an exceptional instructional video! Really appreciate the camera view showing which screws you were taking out, and the lining up of the parts! You also saved me a ton of time by doing it without ripping the X=Maxx apart! I really appreciated it!! -God bless
You're welcome. Thanks for subscribing and watching.
Hey, bro, nice video. Do you think you have an extra hawk body for sale? As I have a chassis but I have no body. Keep up the great content.
Thanks man! I will look around the basement. If I find anything I'll hit you up on Facebook.
Picking one up soon. Believe it is a kit verson bc it has Futaba radio. Can't wait 🙂
Awesome!!! Enjoy it!
NOT EVEN CLOSE TO 100ft
🤣🤣🤣🤣🤣🤣🤣🤦🏼♂️
Is it true ARRMA 8S stock uses low quality 7075 Chasis ? People say it’s really easy to bent them.
I have never bent more then just a tiny bit, not enough to affect the performance of the truck.
Good video. Thanks 👍
You're welcome
Chique carro baja 🏎🔥💥😎🥰😍👍🏻💪🏼
Gracias mí amigo!
I love my xmaxx but I olso respect any one that has a diferent opinion
XMaxx is king!
Awesome. The zenoah engine wakes up this Baja. I'm strongly considering getting a g320
It is definitely a great choice that won't break the bank buddy. Thanks for watching. 🤘🏻👊🏻
Hahahah! Now thats putting the Kraton to good use on the farm! Hahahaah! Hey does the Massey have a tank now?
No tank yet. A few other thing's jumped in front of that project. Lol
That's just crazy fast! I imagine if you have RC drivers tourettes during that run you'll demolish that rig..Thanks for sharing!
😂 It doesn't take much to make a mistake, even a tiny swerve at those speeds and everything goes to crap fast. 😝
Kraton has been SENT! Great Video!
Thank you!
Looking good I’m building my outcast to a kraton next week
What's the wheel/tire combo you're running on there?
Proline Badlands
@@D.J_RC did you have to ream the center.
@@odaytim8321 Yes I did. Set up bit and a dremel to knock down the fake lug nuts.
@@D.J_RC Ty for the info I’ll be getting a set so I was wondering if that was needed
Nice speed runs. Congrats
Super bussin bussin frfr
No cap no kizzy
@@wyatt9 frfr big dog
Fast and beautiful!
Yes sir!!!
David J Leveillee. Your becoming a rc speed demon congratulations.
It's an addicting part of the rc world for sure!!!
that's not a torsion bar...this is called a sway bar... two completely different components
Thank god you cleared that up. 👍🏻
Pulled straight from their website... "Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/7th scale Traxxas UDR vehicles. Designed for quick response, this system use a 3mm spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering."
Sorry brother, Thanks for the great video though!!!
👍👌cool video
Sweet nice job
Thanks brother
Nice nitro all the time for me and gas too just don’t have any gas ones yet
Ya...thats a screamer! Tons of low end torque! Runs like a raped ape! Thanks for sharing!