Hej Jan, fed Combi! Drømmer om den samme kombination. Hvilken frihed!
@janschrder6973 Жыл бұрын
Tak. Ja der skal lægges en del ekstra skillinger for at komme til den her kombination. Bilen har jeg selv betalt ca. 82% af. Kørestolen har jeg selv betalt 100% af og hentet i Stockholm hvor den nærmeste forhandler af Genny ligger. Den manuelle kørestol er også med ekstra betaling ud over det som kommunen bevilger. Ud over det har jeg efterfølgende fået lakeret el kørestolen i samme farver soå den passer til bilen. Og alle måtter, puder m.m. i sort - rød er eget design. Men det giver en ekstreme frihed med den Genny som jeg bestemt ikke har fortrudt at betale på den anden side af 100.000,- kr. for, da jeg købte den i 2018. Skriv endelig hvis der er noget jeg kan hjælpe eller vejlede med. evt. på mail: [email protected] Der ligger en del flere videoer på min KZread side med de ting jeg har fundet på og sysler med.
@mariacastaneda4221 Жыл бұрын
Soy de Ecuador,como puedo acceder a este modelo de silla y cuánto valen
@janschrder6973 Жыл бұрын
In English please. But I belive that you ask: "I am from Ecuador, how can I access this chair model and how much are they worth?" I bought mine in Stockholm from a dealer that can be found here: www.luv2move.se as we don't have any dealers in Denmark where I live. But it is produced in Switzerland, at Genny Mobility: www.gennymobility.com There you can probably find out where near Ecuador you can buy it and what it costs.
@kathysavic3967 Жыл бұрын
Hi, I saw your movie with the flightbox, did you make it yourself or can I buy one somewhere? I ordered a bi-go wich is a little cheeper dan a genny but the same idea. And I also realy like the colored light in this movie🤩
@janschrder6973 Жыл бұрын
Hi Kathy. No, you cannot buy that transport box anywhere. It's one I made myself for when I travel by plane. I also made lights on my Genny myself and sewed everything for it such as travel bag, blanket, pillow cover etc. so it all matches.
@kathysavic3967 Жыл бұрын
Dear Jan, Thank you for the quick answer and I admire your creativity, I hope I am going to have as much fun eith my balancing wheelchair as you do with yours! Keep making things to inspire others! Kind regards from Holland Kathy
@95matte952 жыл бұрын
Hej Jan. Vad heter den manuella rullstolen och modellen som du har i bagaget i denna video? Mvh Johan
@janschrder69732 жыл бұрын
Det er en Meyra SmartS manuel kørestol. Den fås med aluminiumsfælge. Med farvede fælge i Magnesium koster ekstra. Her er et link til deres hjemmeside www.meyra.com/wheelchairs/active/smart/
@95matte952 жыл бұрын
@@janschrder6973 Stort tack. Johan
@ChrisLynchFilm3 жыл бұрын
Hi Jan.. I was just wondering if you made the box for your Genny or is this something you purchased? I'm about to receive my Genny next week and looking at options for transport etc. Many thanks!
@janschrder69733 жыл бұрын
I made it my self. But after using it on a trip to Malaga and back to Denmark by plain. I am going to do a little ajustment on it so it can be usede for traveling in all kind of planes.
@ChrisLynchFilm3 жыл бұрын
@@janschrder6973 Amazing work - you can see the level of detail you've gone into! I have an Omeo and will be using the soft travel bag that I got for it as it's very similar in design. I really like what you've done though and am definitely considering doing something similar however I think there may be an opportunity to modify a flight case that is used for audio gear for events.
@janschrder69733 жыл бұрын
@@ChrisLynchFilm That right. There only one problem whit planes. Here in Denmark the Air companies have different rules. I travel whit Norwegian Air and the alove an elektrik wheelchair to be 85cm high 140cm long and 140cm wide. But if i would like to travel whit Ryan Air the wheelchair only are alowed to be 81cm high. And whit KLM 70cm high if i go whit their smalest plane to an conectin fligt in Amstedam or Paris. My box was 84cm high but i found out that it is only the cargoroom ther is 85cm high. The cargo hole in the plane is smaller then 84cm, so the cargo people tiped the box over to get it in and out of the plane both ways. Luckely i made the box well so my Genny surwivede whit out a scraths laing on the side the whole 3,5 ouhr flight.
@renreme29033 жыл бұрын
🤗
@renreme29033 жыл бұрын
Oh... 👌 Perfect
@znsg767 жыл бұрын
What film is 8mm or 8mm super?
@janschrder69737 жыл бұрын
8mm is the first kind of 8mm movie. Super8 came later. My father used 8mm until about 1966 and the swits to Super8 whits gave a better picture. You can see the different here in this link. And this MovieMaker can scan both kind of film. www.dvdyourmemories.com/blog/8mm-film-vs-super-8-film-whats-the-difference/
@znsg767 жыл бұрын
Here the movie regular 8mm?
@janschrder69737 жыл бұрын
This movie is from 1971 and a Super8 movie.
@znsg767 жыл бұрын
In settings did not add sharpness?
@janschrder69737 жыл бұрын
This one is from 1960 and a regular 8mm, that my father made from a Royal vissit i Greenland. kzread.info/dash/bejne/qKOfx6eocsLep5s.html
@DonRoebuck7 жыл бұрын
This is rather good for the price of the equipment....looking forward to seeing my family movies in a few weeks. Did you use any particular settings, cleaning methods, etc. I seem to have equal quantities of 1960-70 Super 8 reels and pre-1960 Standard 8 Would be interested to know your post-processing procedures too. Sorry to ask so many questions. You must be pleased with the results. Best result I've seen so far with the Wolverine. Well done! Best wishes, Don
@janschrder69737 жыл бұрын
This one I set the exposure on +0,5 on the Wolverine and then it is Super8. The rest is standard setings in this movie. After recording I have slowed the movie from 30 frame/sec to 18 frame/sec on the computer, so the movie is normal speed. I don't use the little brush to clean with betwen the recording on the Wolverine. I use an air spray duster. www.biltema.dk/da/Kontor---Teknik/Computere/Tilbehor/Luftspray-2000033264/
@DonRoebuck7 жыл бұрын
Thanks Jan, that's great information. I do have some software to edit. I think someone else mentioned air spray, I will bear all this in mind. Thanks for your help...and keep them coming, really very good. Don
@DonRoebuck7 жыл бұрын
Nicely presented...thanks. Just ordered a Wolverine and, if I can get anywhere near your results, I will be happy. There are criticisms on both results. However, having no projector and many, many reels of Standard and Super 8mm from deceased relatives, the Wolverine could provide an adequate 'Pass 1' to see what is there......and maybe good enough without too much expense.
@janschrder69737 жыл бұрын
Thanks. You just have to be aware of the speed of the movie when it's scanned with the Wolverine. It produces and plays in 30/sec frames, but it's easy to fix to 18/sec frames with an editing program on the computer.
@DonRoebuck7 жыл бұрын
Yes I've been viewing a few KZreadrs that have used the equipment and now understand that requirement....enjoy your machine...or maybe you prefer the other technique. Don
@janschrder69737 жыл бұрын
After I have scannet some of the film we have, the picture on the scanner sundentlig loked od after i had put on a new film. It was like the scanner had zomed a little out and moved the pictureframe. I could not understand that becouse the scanner have been standing on the table, whitout been moved or hit at any time. So i wrote a mail to Wolverine suport. They answered me and snad me a little software suport and a guide to instal it. So now i can move and zome the picture, so it look right again. Just in case you will get the same problem.
@DonRoebuck7 жыл бұрын
OK. Thanks for the tip. I am impatiently awaiting the shipment of my machine....could be a few weeks yet! I understood from another user that the firmware had been improved, so you must have the latest version now.
Пікірлер
Hej Jan, fed Combi! Drømmer om den samme kombination. Hvilken frihed!
Tak. Ja der skal lægges en del ekstra skillinger for at komme til den her kombination. Bilen har jeg selv betalt ca. 82% af. Kørestolen har jeg selv betalt 100% af og hentet i Stockholm hvor den nærmeste forhandler af Genny ligger. Den manuelle kørestol er også med ekstra betaling ud over det som kommunen bevilger. Ud over det har jeg efterfølgende fået lakeret el kørestolen i samme farver soå den passer til bilen. Og alle måtter, puder m.m. i sort - rød er eget design. Men det giver en ekstreme frihed med den Genny som jeg bestemt ikke har fortrudt at betale på den anden side af 100.000,- kr. for, da jeg købte den i 2018. Skriv endelig hvis der er noget jeg kan hjælpe eller vejlede med. evt. på mail: [email protected] Der ligger en del flere videoer på min KZread side med de ting jeg har fundet på og sysler med.
Soy de Ecuador,como puedo acceder a este modelo de silla y cuánto valen
In English please. But I belive that you ask: "I am from Ecuador, how can I access this chair model and how much are they worth?" I bought mine in Stockholm from a dealer that can be found here: www.luv2move.se as we don't have any dealers in Denmark where I live. But it is produced in Switzerland, at Genny Mobility: www.gennymobility.com There you can probably find out where near Ecuador you can buy it and what it costs.
Hi, I saw your movie with the flightbox, did you make it yourself or can I buy one somewhere? I ordered a bi-go wich is a little cheeper dan a genny but the same idea. And I also realy like the colored light in this movie🤩
Hi Kathy. No, you cannot buy that transport box anywhere. It's one I made myself for when I travel by plane. I also made lights on my Genny myself and sewed everything for it such as travel bag, blanket, pillow cover etc. so it all matches.
Dear Jan, Thank you for the quick answer and I admire your creativity, I hope I am going to have as much fun eith my balancing wheelchair as you do with yours! Keep making things to inspire others! Kind regards from Holland Kathy
Hej Jan. Vad heter den manuella rullstolen och modellen som du har i bagaget i denna video? Mvh Johan
Det er en Meyra SmartS manuel kørestol. Den fås med aluminiumsfælge. Med farvede fælge i Magnesium koster ekstra. Her er et link til deres hjemmeside www.meyra.com/wheelchairs/active/smart/
@@janschrder6973 Stort tack. Johan
Hi Jan.. I was just wondering if you made the box for your Genny or is this something you purchased? I'm about to receive my Genny next week and looking at options for transport etc. Many thanks!
I made it my self. But after using it on a trip to Malaga and back to Denmark by plain. I am going to do a little ajustment on it so it can be usede for traveling in all kind of planes.
@@janschrder6973 Amazing work - you can see the level of detail you've gone into! I have an Omeo and will be using the soft travel bag that I got for it as it's very similar in design. I really like what you've done though and am definitely considering doing something similar however I think there may be an opportunity to modify a flight case that is used for audio gear for events.
@@ChrisLynchFilm That right. There only one problem whit planes. Here in Denmark the Air companies have different rules. I travel whit Norwegian Air and the alove an elektrik wheelchair to be 85cm high 140cm long and 140cm wide. But if i would like to travel whit Ryan Air the wheelchair only are alowed to be 81cm high. And whit KLM 70cm high if i go whit their smalest plane to an conectin fligt in Amstedam or Paris. My box was 84cm high but i found out that it is only the cargoroom ther is 85cm high. The cargo hole in the plane is smaller then 84cm, so the cargo people tiped the box over to get it in and out of the plane both ways. Luckely i made the box well so my Genny surwivede whit out a scraths laing on the side the whole 3,5 ouhr flight.
🤗
Oh... 👌 Perfect
What film is 8mm or 8mm super?
8mm is the first kind of 8mm movie. Super8 came later. My father used 8mm until about 1966 and the swits to Super8 whits gave a better picture. You can see the different here in this link. And this MovieMaker can scan both kind of film. www.dvdyourmemories.com/blog/8mm-film-vs-super-8-film-whats-the-difference/
Here the movie regular 8mm?
This movie is from 1971 and a Super8 movie.
In settings did not add sharpness?
This one is from 1960 and a regular 8mm, that my father made from a Royal vissit i Greenland. kzread.info/dash/bejne/qKOfx6eocsLep5s.html
This is rather good for the price of the equipment....looking forward to seeing my family movies in a few weeks. Did you use any particular settings, cleaning methods, etc. I seem to have equal quantities of 1960-70 Super 8 reels and pre-1960 Standard 8 Would be interested to know your post-processing procedures too. Sorry to ask so many questions. You must be pleased with the results. Best result I've seen so far with the Wolverine. Well done! Best wishes, Don
This one I set the exposure on +0,5 on the Wolverine and then it is Super8. The rest is standard setings in this movie. After recording I have slowed the movie from 30 frame/sec to 18 frame/sec on the computer, so the movie is normal speed. I don't use the little brush to clean with betwen the recording on the Wolverine. I use an air spray duster. www.biltema.dk/da/Kontor---Teknik/Computere/Tilbehor/Luftspray-2000033264/
Thanks Jan, that's great information. I do have some software to edit. I think someone else mentioned air spray, I will bear all this in mind. Thanks for your help...and keep them coming, really very good. Don
Nicely presented...thanks. Just ordered a Wolverine and, if I can get anywhere near your results, I will be happy. There are criticisms on both results. However, having no projector and many, many reels of Standard and Super 8mm from deceased relatives, the Wolverine could provide an adequate 'Pass 1' to see what is there......and maybe good enough without too much expense.
Thanks. You just have to be aware of the speed of the movie when it's scanned with the Wolverine. It produces and plays in 30/sec frames, but it's easy to fix to 18/sec frames with an editing program on the computer.
Yes I've been viewing a few KZreadrs that have used the equipment and now understand that requirement....enjoy your machine...or maybe you prefer the other technique. Don
After I have scannet some of the film we have, the picture on the scanner sundentlig loked od after i had put on a new film. It was like the scanner had zomed a little out and moved the pictureframe. I could not understand that becouse the scanner have been standing on the table, whitout been moved or hit at any time. So i wrote a mail to Wolverine suport. They answered me and snad me a little software suport and a guide to instal it. So now i can move and zome the picture, so it look right again. Just in case you will get the same problem.
OK. Thanks for the tip. I am impatiently awaiting the shipment of my machine....could be a few weeks yet! I understood from another user that the firmware had been improved, so you must have the latest version now.