Stinkwell Exhaust Creations
Stinkwell Exhaust Creations
We love building LEGO MOCs and just want to share them with you.
If you have any questions, ideas or other stuff just write a comment. : )
Thanks!
Haflingerfan is the one of us who builds the Technic stuff on our channel so he may reply to your comments as well.
Пікірлер
素晴らしい!私以外にもURAL-5920を作っている人がいてうれしい。
Hallo, Welchen Maßstab entspricht das Modell ungefähr ?
1:22, basierend auf dem Reifendurchmesser Er ist ein bisschen breiter als er sein sollte damit die 13er Zahnstangen für die Lenkung reinpassen. Der Ausleger ist deutlich kürzer wenn ausgefahren, sind nur 2 Teleskopierende Sektionen statt 4 und auch kürzer damit der Motor zum ausfahren reinpasst. Die längste maßstabsgetreue Wippspitze wäre 3,6 m lang!
@@stinkwellexhaustcreations Dankeschön für die schnelle und Ausführliche Antwort
Your stuff deserves wayyy more attention!! This is awesome!
Thank you!
Recently discovered this channel and can’t stop watching! I’m surprised you don’t have more subscribers but I love your stuff keep it up!
Thank you soo much! I'm not too active on KZread, more on Rebrickable. I enjoy building the models more than making the videos about them, but I like to be able to show how they work. So I'm mostly focusing on building the models and making instructions for them, the videos are "only" an addition. I could put more effort into them, but I'm happy with how they are and they already improved a lot since the first ones. For this particular video, I made the effort to add a lot more cuts to make it actually interesting to watch the DT-30 drive around, it's kind of slow... : )
Genialer Krahn, Toll. Die Arbeit haut mich aus den Socken.👍👍👍
Danke!
if you need some help with the steering on the axles of your faun slt 56 trailer i can help you. i assemble steering on real semitrailers.
Cool, that'd be helpful! How do they get the steering motion from the kingpin to the axles? Do they measure the angle of the truck relative to the trailer with a sensor and then steer the axles hydraulicly? I'm planning to use a rope to transmit the rotation of the kingpin to a reel that's connected to a rack and pinion steering system. So basically when the fifth wheel rotates relative to the trailer, the string gets pulled on one side and then rotates an axle that steers the axles throughgears and gear racks.
Hello, I am Lesdiy and the product manager of Letbricks, can we talk about the collaboration of the works? Your works are really amazing
Cool! Write me a PM over Rebrickable, I think that's the easiest way to commuinicate!
@@stinkwellexhaustcreations Please give me your email,we can communicate via email
@@stinkwellexhaustcreations Can you give me your email address so we can communicate via email?
This is sick
Thanks!
cada looks like cadfi
Yeah, it does : )
Хорошая машина. Строю тож зил 135, но на больших колесах.
Cool!
Are PDF instructions available?
Unfortunately not. There are video instructions for the bodywork here: rebrickable.com/mocs/MOC-53327/Stinkwell_exhaust_creations/jeep-willys/#details This was just thrown together and didn't work too well in the end, so no instructions for the chassis, but you can of course build your own!
nice one. is there a reason you opted for awd instead of rwd?
The real one is AWD. Also it's kinda hard to make good drifts with a LEGO RWD car, and as long as you have plenty of power, AWD is a lot more fun to drive around!
You can use the gear transmission rings for the front exhausts, I think it would look better
What piece exactly do you mean?
The orange Gear switching things. They are rings and can thing 2 gears at once, They appeared in the Bugatti Chiron and The land rover Defender. @@stinkwellexhaustcreations
Lego 18947
@@thedumbasain Good idea, it actually matches the look of the real turbo setup better!
@@stinkwellexhaustcreationsalso where do you get your parts from? Do you buy them individually or from sets? I’m trying to get the 64.4x 20S tyres. (32019)
Sigmatruck
That's so cool! When I got to work this morning, I started sharing ideas about how to make a water brake dyno out of LEGO on a LEGO engine discord server and when we started researching tachometers, I found this creation! I would love to build this but I don't own an EV3. I do have NXT 2.0 but I don't have any PF motors or as many Technic parts as this dyno requires. So I may have to improvise, but I love that you've already proven that it can be done!
Thanks! I was surprised how well it worked and how accurate it was! You can probably build your own with the pieces you have using this concept. You only need two things: measure when a certain torque is applied (in this case when the mass is lifted) and measure the rpm at that point in time. You can calculate the power with those two values
do 1987 two door chevy short bed cool build
Thanks! I've got a two door Blazer (rebrickable.com/mocs/MOC-128619/Stinkwell_exhaust_creations/chevrolet-k5-blazer-bodywork/#details), you'll need to modilfy the headlights a bit to match the 87 one though
This same truck and trailer is on Amazon did u come up with the idea for this?
This is my creation with my building instructions. They didn't even ask me for permission to sell it.
do you know how much the boom weighs
Just over 1 kg
i got a problem when I combined all the differential parts, the sharp which connected to the gear easily loose. How can I fix it?
Do you mean that the piece that the middle gear sits on breaks off? Or does the piece of paper come loose?
Very nice
Thank you!
geiles modell, echt gut gemacht dafür das er so klein ist das würde ich nicht hinkriegen. Ausserdem danke für ein paar tipps von deinen instruktions, ich habe auch vor eine zu bauen oder es wenigstens versuchen. wennich es schaffe, wird irgendwann auf dem kanal LegoLuca593 dazu ein video kommen. Aber wann kommt die nächste? ich hab gehört das es dieses Jahr auch noch eine geben wird
Danke! Ich will versuchen das schild umzubauen, dass man es auch um die längsachse drehen kann. Vielleicht kommt auch noch ein kran hintendrauf, aber dazu bräuchte ich einen dritten BuWizz, sonst gehen mir die outputs aus.
Gut, das ist der dritt Account von mir 😂 ein Kran wäre sehr geil- aber ja buwizz sind arschteuer. Ich bräuchte eigentlich auch drei bekomme aber „nur“ zwei. Aber danke, du hast mir bei der Blade vorne echt geholfen mit deinem Tutorial da 🎉
@@SlaXguys Ich versuche grad noch mehr bewegungsfreiheit für das schild hinzubekommen, sollte mit kleinen pneumatikzylindern funktionieren. Der motor für die scheibenwischer steuert dann pumpe + ventil
would you make a crawler crane in 1:21 scale? like a liebherr lr 11000?
That would be huge, I don't have nearly enough pieces for that... I tried building one in a 1:62 scale (using the boom sections from the 42042), but the turntable wasn't strong enough and the whole crane just wasn't stable enough. I will try again though and hopefully get it strong enough to actually have a usable lift capacity with a long boom.
@@stinkwellexhaustcreations if you want to build one in the 1:21 scale ill help
The customized linear actuator inspired me. I've found your fantastic MOC when surfing the RB a few days ago.
Thanks!
Wow I love it! I would like to build one. Do you have a parts list? Great build man!!
Thank you! There are links to the Rebrickable pages of the truck and the trailer in the description. There you can find the part lists and instructions! Warning: it'll be kind of expensive!
Very cool idea!
Thanks!
why does this crane have that bend in the luffing jib . it looks really off? the real crane has that bend as well do you know what that is for ? ( im talking ybout the first luffing jip part
I think it's for easier assembling of the jib on the ground. When you connect the jib to the crane with the boom horizontally, the front part of the jib is almost at ground level which simplifies working on it a lot.
hey how many studs is your crane wide?
@@the_austrian_brick 19 studs wide at the chassis, 27 with the counterweights
With what are you controlling the truck?
With a BuWizz 2.0, that's a LEGO compatible 3rd party battery and bluetooth reciever unit that can control 4 Power Functions outputs using the BuWizz app
@@stinkwellexhaustcreationsthanks
MOC's?. And I love the Government Safety Video background music.
MOC stands for "My Own Creation". Thanks!
Any snow mocs this year
I definitely have enough snow now. I'm working on one digitally, so stay tuned!
tysm, this video was so helpful, we used it for a competition! Thank you again!
You're welcome! How did the competition go?
Отдельное спасибо за инструкцию в описании род видео!
You're welcome!
Now with the 88006
That one's way slower and it only has one output per side, so not as fun : )
No way I’m looking for these types of builds and I see a new one.
Cool!
i hope see more small models from you, really good work. I love it
I want to build more small models in the future, they're really fun!
I see you were inspired by my Ural. Transmission with the universal joints looks like my Ural-5920 but smaller
Basically your drivetrain looks like the one in the real truck and this one is a simplified version of that to actually fit in the small size.
most functional big crane MOC I've found, amazing work
Thank you!
very impressive 👌
Thanks!
very cool!
Thanks!
What a masterpiece, I wish Lego could make sets like this.
Thanks! That would be quite expensive though...
Cool! I want to make one but I don’t think I have some of the parts, especially for the scooper.
What parts are you missing? Maybe you can replace them with other parts.
Free PDF Instructions are now available! reb.li/m/162231
Amazing
Thanks!
Cool RC MOC! Have you ever considered uploading instructions for it?
I've taken it apart 3 years ago, but I can try to build a 3D model using some pictures and make instructions if you want!
@@stinkwellexhaustcreations That would be awesome, thank you!
@@SuperMarioRL On my to do list!
@@SuperMarioRL Here you go: rebrickable.com/mocs/MOC-162231/Stinkwell_exhaust_creations/9395-rc-mod-power-functions/
First axle is the best
I like all of your creations and am amazed that you offer the instructions for free! Thank you so much!
Thank you!
I know this is a late comment, but I was wondering if you could do like a newer Chevrolet Silverado with a bumper pull. And please do a video on making it if you do this I will be so grateful for it. Have a blessed life.😊 thank you🤗
I'll add it to my list of planned models, but you'll have to wait, the list is long : )
@@stinkwellexhaustcreations thank you man let me know when you make it. The reason I asked is because right now I'm making a chassis with adjustable suspension and I need a body design to put on top thank you.🤗
@@frazercarter7295 Adjustable suspension sounds cool, I gotta try that at some point! What tires are you using?
I am using the (s 49.5x20) but I am going to try and get some new ones just a little bit bigger.
i want to build the tatra so bad
I'll try to finish it quickly but I think I'll build the M936 and the Grove mobile crane before. Maybe I'll finish it first though, I don't know yet
Yo that's some next level shit going on there😄! I had a bad time reading the subtitles, but you kept in simple🤝
Thanks!
cool idea, but this isnt really a limited slip diff because limited slip differentials work by allowing slip until a certain threshold whereas this works by refusing to slip until a certain threshold
Nice. One of the best lego KRAZ I've ever seen
Thank you!