Great job, hands down best video I’ve seen on hydrolic hose set up, thanks for sharing this!
@hazmoreoutdoorproducts297711 сағат бұрын
@ClearviewOutdoors We appreciate you watching.
@turdferguson5300Күн бұрын
I don't know if I would change a thing but if you want something smoother than a hydraulic fitting in your hand I used a knob bolt from Amazon. A 1/4" knob bolt will screw into a raw end of the 1/4" hydraulic hose. I put sealant on mine but I don't think you have to. I current fish a lot so I needed one in the pipe to add some resistance so it wouldn't turn unless I wanted it to. I used aluminum with bearings and it turned very easily before the tension knob bolt was added. Most of these things are trial and error. lol
@hazmoreoutdoorproducts297711 сағат бұрын
@turdferguson5300 There is always improvements for everything. I appreciate the suggestion! I also made an interchangeable control arm in this video kzread.info/dash/bejne/Z6Otz6triK_NdLA.html Don't know if you seen it.
@turdferguson53005 сағат бұрын
@@hazmoreoutdoorproducts2977 I mounted my rig to the Humminbird 360 pole so it goes in with the trolling motor way up on the front of the boat 5' away. I know because I needed a 6' piece of hydraulic hose. That was the main expense of the build. I live between Watts Bar and Sequoyah nuclear plants and they take their scrap to Seaton Metals in Athens Tn. where I buy aluminum and stainless for $1.25 per pound. Almost any size you can imagine so the metal was cheap and so were the stainless ball bearings and collars from Amazon. They got me on the hose but nothing else worked as well and believe me I tried several things. I even tried a toilet snake, (a new toilet snake) but as you can imagine it was shitty. (pun intended) My next project will be power poles. Seaton had 1"diameter stainless conduit that I'm planning to start with, Walmart has 8' fiberglass poles in the garden section, and the plates/mounts will be aluminum. I think 12 volt actuators will be enough to hold a metal boat I just don't want the extremely slow ones. That will be the expense in this project. I don't want a remote just a simple up and down switch. I'd be happy if they held in 12' but we'll see. These mounts also need to fold forward for backing in the garage or not going through the roof of the boat dock. When your boat is going up in the lift you do not want to hear wood splintering. Not that I do anything like that. lol
@allkindsofoutdooractivities2 күн бұрын
Super nice addition! Poor man’s power pole!
@hazmoreoutdoorproducts297711 сағат бұрын
@allkindsofoutdooractivities It does work great. I have been very happy with it.
@allkindsofoutdooractivities5 сағат бұрын
@@hazmoreoutdoorproducts2977 that’s awesome!
@williamjenkins372014 күн бұрын
Awesome
@hazmoreoutdoorproducts297711 сағат бұрын
@williamjenkins3720 Thank you for watching!
@kemimoto_officialАй бұрын
Hi there, your videos are fantastic! What is the best way to contact you for business inquiries? Thanks!
@JamieFerguson-kx1gs2 ай бұрын
Nothing is better than the gameplane tss
@hazmoreoutdoorproducts29772 ай бұрын
Game Plan did make some excellent products. Too bad they went out of business.
@randydeskins93594 ай бұрын
Has anyone tried the Molle system with a tree lounge tree stand???
@hazmoreoutdoorproducts29772 ай бұрын
it would be tough to mount one on the tree lounge.
@AmbitiousRacks5 ай бұрын
Just got mine in! Going to throw it on tonight - Cant wait to use it this upcoming archery season! Thanks guys!
@MrThepaul19956 ай бұрын
How’d you get the old FL camo wrapping for the arm rests?
@hazmoreoutdoorproducts29776 ай бұрын
It is ASAT camo, we bought some of the fabric a few years back, so since that is my camo of choice we made a back rest and arm rest and our accessory pocket from it.
@PaulSmith-tf9bn6 ай бұрын
I like the seat I'll see about getting one. Now about the most exciting thing is the host, his talking and excitement about the product is over the top, I couldn't hardly contain myself.
@coreylang158 ай бұрын
The back rest is nice, but they definitely aren't made for all summit stands. It doesn't fit my viper steel stand like the open shot summit shown in the video. The back rest is basically floating with the straps holding it in place. Had to leave it a little loose so that I could still pack my climber. It was in the way otherwise. It's still comfortable. From what little I can tell it's there, but definitely not what I was anticipating.
@hazmoreoutdoorproducts29778 ай бұрын
It fits every Summit model, but that one. We certainly do not mind refunding your purchase.
@jonpederson482710 ай бұрын
I wish my straps were As long as is his mine are way shorter
@hazmoreoutdoorproducts297710 ай бұрын
Jon longer straps heading your way.
@timlintemuth886011 ай бұрын
Why white?
@hazmoreoutdoorproducts297711 ай бұрын
The color is actually tan kaki. Similar to the light tan in asat camo. It blends in well in the woods.
@bwillis3264 Жыл бұрын
Is this system still available? Thanks
@hazmoreoutdoorproducts2977 Жыл бұрын
Yes, here is the link hazmore.net/products/molle-tree-stand-packing-system?variant=33098500177973
How much does that setup weigh I have a titan as well and want that setup but I’d like to know what that weighs all together
@hazmoreoutdoorproducts2977 Жыл бұрын
Mine weights just under 27 pounds. With the Molle system, it makes packing pretty easy. All the weight is on your waist.
@JBIRD270 Жыл бұрын
Genius
@larryshannon8433 Жыл бұрын
Nice.... Enjoy....
@JBIRD270 Жыл бұрын
Good video
@JBIRD270 Жыл бұрын
Awesome
@raymondjones6024 Жыл бұрын
That's a ton of noise packing up I keep it simple with all my gear and safety rope in my Summit sidebags and roll them under the side bars there attached to under my rapid stirrups and use a camo bungee to keep them slapping during transport and use the Summit strap to lock both stand portions together and a Thirdhand bowholder makes it ergonomic with the mesh seat design of the Summit Viper Elite
@hazmoreoutdoorproducts2977 Жыл бұрын
I am old and fat. Making noise is what I do. My hearing is shot so to me I am quiet as a mouse.
@raymondjones6024 Жыл бұрын
@hazmoreoutdoorproducts2977 That's funny I'm no spring chicken myself in my mid 50s try running a Lonewolf Alpha with 5 Lonewolf sticks it's heavier that my Treelounge bowhunters special and setting it up that's when you really feel it taking in and out on public land.
@ronaldbeasley4945 Жыл бұрын
Never mind I see they are on the bottom.
@ronaldbeasley4945 Жыл бұрын
Wouldn’t you have rolled the zip ties to the downward position before tying of to prevent slide or roll?
@Anduin-oy5ij Жыл бұрын
Thanks for making this for us non-military folk 😉
@Bettlerrony Жыл бұрын
Great Products, do you ship top Germany? Thank you
@hazmoreoutdoorproducts2977 Жыл бұрын
Sorry we do not. We discontinued international shipping a couple years ago. The tracking once it leaves the US is very spotty.
@Bettlerrony Жыл бұрын
@@hazmoreoutdoorproducts2977 i understand. Thank you.
@dereksmith55512 жыл бұрын
Great video my friend those times your daughters always gonna remember
@TimberBucksProductions2 жыл бұрын
Great product!!
@jgleez43212 жыл бұрын
What weight is this rated for ? I'm 240lbs and tie wraps initially dosnt sit well with the idea of being 20ft in a tree.
@hazmoreoutdoorproducts29772 жыл бұрын
The cable ties we supply are industrial rated at 40 lbs. Each install uses 11 to secure the seat. The total weight rating for those are 440 pounds collectively. We have sold 1000s of these seat with absolutely no issues. Most stands are only rated for 300 or 350 pounds.
@jgleez43212 жыл бұрын
Sold , ordering on now love the idea and thanks for the quick response
@hazmoreoutdoorproducts29772 жыл бұрын
@@jgleez4321 I do appreciate it.
@jgleez43212 жыл бұрын
Have an install vid for summit viper sd?
@LetYourLightSoShine9992 жыл бұрын
If I bought this product I don't think I would want the zip ties I'd rather have the poly rope to tie. Can you do that
@hazmoreoutdoorproducts29772 жыл бұрын
Yes, no problem. Just make a note in your order.
@LetYourLightSoShine9992 жыл бұрын
@@hazmoreoutdoorproducts2977 I did ordered it couple hours ago
@pegasis00662 жыл бұрын
Looks like a tangled mess.
@hazmoreoutdoorproducts29772 жыл бұрын
Maybe to the untrained eye, but in reality it is a well oiled hunting machine. Maybe you should try out the upgrades to your climbing setup. hazmore.net Money back guarantee if you are not completely satisfied.
@Adam-bp9zj2 жыл бұрын
Hi, I just got the MOLLE in mail today. I just got the quick change kits, is there a way to attach the buckles to the harness? Figured they would be attached already. Thanks
@hazmoreoutdoorproducts29772 жыл бұрын
Here is the link to the rigging video. kzread.info/dash/bejne/jH9nw7KoibedZrQ.html
@godsfrontporch21872 жыл бұрын
Love it lot batter
@kadams9442 жыл бұрын
Great Video. The straps on my current Titan are ripping and I have been looking for a new setup. I will head over to your website to check these out. Please add a link.
@kadams9442 жыл бұрын
I noticed on your website it says up to 42" pant size. Do you have plans to make an extension strap or longer model?
@hazmoreoutdoorproducts29772 жыл бұрын
hazmore.net/ We have straps too. If you don’t want to go the molle system route. Email me at [email protected] with the belt length you need an I will see what we can do.
@KJMJ12282 жыл бұрын
I could hear you when you pushed the seat back. To me if I can hear it a deer would to.
@hazmoreoutdoorproducts29772 жыл бұрын
I really was not trying to be quiet, plus I am wearing a very high powered mic, no telling what you where hearing. We have thousands of these seats out there and no one has ever complained about the silent seat not being silent. Try one for yourself if you are not 100% satisfied, we will refund your money.
@atch_n_sons2 жыл бұрын
Just pulled the trigger or your summit backrest. I love the silent seat but missed the backrest. An I leave the backrest on or does it cone off during breakdown/transport?
@hazmoreoutdoorproducts29772 жыл бұрын
The backrest stays attached to your seat frame and does not interfere with nesting your stand together and packing. We have replaced the velcro with straps and a slide buckle this year.
@atch_n_sons2 жыл бұрын
@@hazmoreoutdoorproducts2977 sounds great 👍 thank you. My silent seat is great. My setup/breakdown time was cut in half. 🏹🦌🍀
@davidrussell6312 жыл бұрын
@@hazmoreoutdoorproducts2977 kudos for improving the backrest attachment. I’ve got the original and it’s found a home on a dove hunting stool I modded for deer hunting.
@mikeguy96682 жыл бұрын
How much was that backrest? And is the hazemore seat comfortable or does it hurt your ass after an all day sit?
@hazmoreoutdoorproducts29772 жыл бұрын
The backrest is $26.95. hazmore.net/collections/seat-cushions-and-back-rest/products/summit-seat-back-rest The hazmore seat is very comfortable, I have no problems sitting all day.
@benharley65943 жыл бұрын
Great video 👍 I have never been there but coming this weekend. How far is it from state park out to bay ?
@hazmoreoutdoorproducts29773 жыл бұрын
It is about 4 miles.
@benharley65943 жыл бұрын
@@hazmoreoutdoorproducts2977 Thanks
@str8eningthecurves1239 жыл бұрын
Put a Hazmore Silent Seat on my Summit Viper last year and love it. Thanks for a great product!
Пікірлер
Great job, hands down best video I’ve seen on hydrolic hose set up, thanks for sharing this!
@ClearviewOutdoors We appreciate you watching.
I don't know if I would change a thing but if you want something smoother than a hydraulic fitting in your hand I used a knob bolt from Amazon. A 1/4" knob bolt will screw into a raw end of the 1/4" hydraulic hose. I put sealant on mine but I don't think you have to. I current fish a lot so I needed one in the pipe to add some resistance so it wouldn't turn unless I wanted it to. I used aluminum with bearings and it turned very easily before the tension knob bolt was added. Most of these things are trial and error. lol
@turdferguson5300 There is always improvements for everything. I appreciate the suggestion! I also made an interchangeable control arm in this video kzread.info/dash/bejne/Z6Otz6triK_NdLA.html Don't know if you seen it.
@@hazmoreoutdoorproducts2977 I mounted my rig to the Humminbird 360 pole so it goes in with the trolling motor way up on the front of the boat 5' away. I know because I needed a 6' piece of hydraulic hose. That was the main expense of the build. I live between Watts Bar and Sequoyah nuclear plants and they take their scrap to Seaton Metals in Athens Tn. where I buy aluminum and stainless for $1.25 per pound. Almost any size you can imagine so the metal was cheap and so were the stainless ball bearings and collars from Amazon. They got me on the hose but nothing else worked as well and believe me I tried several things. I even tried a toilet snake, (a new toilet snake) but as you can imagine it was shitty. (pun intended) My next project will be power poles. Seaton had 1"diameter stainless conduit that I'm planning to start with, Walmart has 8' fiberglass poles in the garden section, and the plates/mounts will be aluminum. I think 12 volt actuators will be enough to hold a metal boat I just don't want the extremely slow ones. That will be the expense in this project. I don't want a remote just a simple up and down switch. I'd be happy if they held in 12' but we'll see. These mounts also need to fold forward for backing in the garage or not going through the roof of the boat dock. When your boat is going up in the lift you do not want to hear wood splintering. Not that I do anything like that. lol
Super nice addition! Poor man’s power pole!
@allkindsofoutdooractivities It does work great. I have been very happy with it.
@@hazmoreoutdoorproducts2977 that’s awesome!
Awesome
@williamjenkins3720 Thank you for watching!
Hi there, your videos are fantastic! What is the best way to contact you for business inquiries? Thanks!
Nothing is better than the gameplane tss
Game Plan did make some excellent products. Too bad they went out of business.
Has anyone tried the Molle system with a tree lounge tree stand???
it would be tough to mount one on the tree lounge.
Just got mine in! Going to throw it on tonight - Cant wait to use it this upcoming archery season! Thanks guys!
How’d you get the old FL camo wrapping for the arm rests?
It is ASAT camo, we bought some of the fabric a few years back, so since that is my camo of choice we made a back rest and arm rest and our accessory pocket from it.
I like the seat I'll see about getting one. Now about the most exciting thing is the host, his talking and excitement about the product is over the top, I couldn't hardly contain myself.
The back rest is nice, but they definitely aren't made for all summit stands. It doesn't fit my viper steel stand like the open shot summit shown in the video. The back rest is basically floating with the straps holding it in place. Had to leave it a little loose so that I could still pack my climber. It was in the way otherwise. It's still comfortable. From what little I can tell it's there, but definitely not what I was anticipating.
It fits every Summit model, but that one. We certainly do not mind refunding your purchase.
I wish my straps were As long as is his mine are way shorter
Jon longer straps heading your way.
Why white?
The color is actually tan kaki. Similar to the light tan in asat camo. It blends in well in the woods.
Is this system still available? Thanks
Yes, here is the link hazmore.net/products/molle-tree-stand-packing-system?variant=33098500177973
when will this be back in stock?
Quanto custa?
$61.95. hazmore.net/products/molle-tree-stand-packing-system
How much does that setup weigh I have a titan as well and want that setup but I’d like to know what that weighs all together
Mine weights just under 27 pounds. With the Molle system, it makes packing pretty easy. All the weight is on your waist.
Genius
Nice.... Enjoy....
Good video
Awesome
That's a ton of noise packing up I keep it simple with all my gear and safety rope in my Summit sidebags and roll them under the side bars there attached to under my rapid stirrups and use a camo bungee to keep them slapping during transport and use the Summit strap to lock both stand portions together and a Thirdhand bowholder makes it ergonomic with the mesh seat design of the Summit Viper Elite
I am old and fat. Making noise is what I do. My hearing is shot so to me I am quiet as a mouse.
@hazmoreoutdoorproducts2977 That's funny I'm no spring chicken myself in my mid 50s try running a Lonewolf Alpha with 5 Lonewolf sticks it's heavier that my Treelounge bowhunters special and setting it up that's when you really feel it taking in and out on public land.
Never mind I see they are on the bottom.
Wouldn’t you have rolled the zip ties to the downward position before tying of to prevent slide or roll?
Thanks for making this for us non-military folk 😉
Great Products, do you ship top Germany? Thank you
Sorry we do not. We discontinued international shipping a couple years ago. The tracking once it leaves the US is very spotty.
@@hazmoreoutdoorproducts2977 i understand. Thank you.
Great video my friend those times your daughters always gonna remember
Great product!!
What weight is this rated for ? I'm 240lbs and tie wraps initially dosnt sit well with the idea of being 20ft in a tree.
The cable ties we supply are industrial rated at 40 lbs. Each install uses 11 to secure the seat. The total weight rating for those are 440 pounds collectively. We have sold 1000s of these seat with absolutely no issues. Most stands are only rated for 300 or 350 pounds.
Sold , ordering on now love the idea and thanks for the quick response
@@jgleez4321 I do appreciate it.
Have an install vid for summit viper sd?
If I bought this product I don't think I would want the zip ties I'd rather have the poly rope to tie. Can you do that
Yes, no problem. Just make a note in your order.
@@hazmoreoutdoorproducts2977 I did ordered it couple hours ago
Looks like a tangled mess.
Maybe to the untrained eye, but in reality it is a well oiled hunting machine. Maybe you should try out the upgrades to your climbing setup. hazmore.net Money back guarantee if you are not completely satisfied.
Hi, I just got the MOLLE in mail today. I just got the quick change kits, is there a way to attach the buckles to the harness? Figured they would be attached already. Thanks
Here is the link to the rigging video. kzread.info/dash/bejne/jH9nw7KoibedZrQ.html
Love it lot batter
Great Video. The straps on my current Titan are ripping and I have been looking for a new setup. I will head over to your website to check these out. Please add a link.
I noticed on your website it says up to 42" pant size. Do you have plans to make an extension strap or longer model?
hazmore.net/ We have straps too. If you don’t want to go the molle system route. Email me at [email protected] with the belt length you need an I will see what we can do.
I could hear you when you pushed the seat back. To me if I can hear it a deer would to.
I really was not trying to be quiet, plus I am wearing a very high powered mic, no telling what you where hearing. We have thousands of these seats out there and no one has ever complained about the silent seat not being silent. Try one for yourself if you are not 100% satisfied, we will refund your money.
Just pulled the trigger or your summit backrest. I love the silent seat but missed the backrest. An I leave the backrest on or does it cone off during breakdown/transport?
The backrest stays attached to your seat frame and does not interfere with nesting your stand together and packing. We have replaced the velcro with straps and a slide buckle this year.
@@hazmoreoutdoorproducts2977 sounds great 👍 thank you. My silent seat is great. My setup/breakdown time was cut in half. 🏹🦌🍀
@@hazmoreoutdoorproducts2977 kudos for improving the backrest attachment. I’ve got the original and it’s found a home on a dove hunting stool I modded for deer hunting.
How much was that backrest? And is the hazemore seat comfortable or does it hurt your ass after an all day sit?
The backrest is $26.95. hazmore.net/collections/seat-cushions-and-back-rest/products/summit-seat-back-rest The hazmore seat is very comfortable, I have no problems sitting all day.
Great video 👍 I have never been there but coming this weekend. How far is it from state park out to bay ?
It is about 4 miles.
@@hazmoreoutdoorproducts2977 Thanks
Put a Hazmore Silent Seat on my Summit Viper last year and love it. Thanks for a great product!