Пікірлер

• 
  @1jonahernandez14 сағат бұрын

  Would the 06 pump work on the 05 RSX?

• 
  @revcircle14 сағат бұрын

  Yes, the 05 and 06 RSX should be the same OEM part number which is the safer swap. I believe as long as you are matching the model, so Type S only works for Type S, and base mode only for base mode. They seem to still be selling this as the dealer and parts website, but discontinued it for 02-04. Otherwise I would have bought that.

• 
  @jvhnnyz486316 сағат бұрын

  Aye man! Hoping you're still active checking the comments every other day. My sunroof stopped working and noticed this little spring with a rubber cover on it that was detached on the driver side. Any idea on where it goes? Haven't taken off my sunroof yet it this heat but wanted to try and ask. I can't find anything on this little piece.

• 
  @revcircle16 сағат бұрын

  hey, i check once and awhile and you caught me at a time I was active. I quickly checked the owners manual sunroof diagram and didnt see any spring in it. You got picture? I dont think I've encountered it myself in my sunroof and I've never taken apart the headliner for this car, only the glass with the 6 screws as shown in my video.

• 
  @2SmooveFr2 күн бұрын

  Please hold still with the camera next time😭🙏🏽

• 
  @bobby_greene4 күн бұрын

  Theres a secondary filter incorporated into the upper housing, should it be blown out or seviced from time to time or do we rely on the disposable one to keep it clean

• 
  @revcircle16 сағат бұрын

  I haven't encountered the second filter in the engine bay, got a picture? I've only replaced this main engine air filter. It is sometimes good to clean the throttle body where the filter tube connects to from time to time when there's build up. That one has a longer maintenance interval from disposable air filters.

• 
  @marcoburroughs13526 күн бұрын

  I appreciate the video. I just realized my oil pan is leaking and I’m pretty sure the plug is stripped so I’m going to replace. Will be using this as a blueprint. Thanks!

• 
  @revcircle6 күн бұрын

  You're very welcome. Glad it's of help. Good luck with your oil pan install.

• 
  @jasonochoa25046 күн бұрын

  Have you had any problems getting a smog done even with the carb sticker?

• 
  @revcircle6 күн бұрын

  For this one, I havent had to do smog yet. I'm due for a smog probably early next year if you wanna check back then. For carb stickers in general, my previous smog was with the K&N typhoon intake and it passed no problem.

• 
  @irvinv989714 күн бұрын

  Hi, my rsx is making a creak noise in the rear passenger side when I go over bumps or when I go into a driveway, could it be that this bushing is bad in my car? Thanks in advance

• 
  @revcircle10 күн бұрын

  It's hard to know the exact issue, it could be any of the bushings. I think the lower control arm bushings are the ones that squeak the most for me. You could try spraying silicone grease a bushing at a time to see if it improves.

• 
  @fazecrazy626614 күн бұрын

  Wait what was the point of the allen wrench? Ive always just whacked it with flat head and a hammer at the back....if that allen wrench helps loosen it then oof couldve saved some paint marks

• 
  @revcircle14 күн бұрын

  It depends on the coilover type. This new generation fortune auto has the bolt to lock it for the Allen wrench. While most traditional coilovers has the double perches. Really depends on what you got but this 8th gen FA500 has the Allen wrench

• 
  @mc88dx14 күн бұрын

  Thanks for the tip on the extension. Can you reference in the description the shop I can contact to make the exact same part? Do you think referencing this video will be enough to get the same part you have? How much was it? Will be getting the same magnaflow part for an ‘02 type S

• 
  @kalani198716 күн бұрын

  I would let the filter and pan drain out at the same time. If you retighten the plug before removing the filter, some oil will still be in the pan

• 
  @revcircle10 күн бұрын

  Good tips too.

• 
  @rad230416 күн бұрын

  How much?

• 
  @revcircle10 күн бұрын

  MSRP I forget the exact number ~29k OTD, imo it's the cheapest new hybrid car one can buy. If you don't get awd, it's cheaper.

• 
  @ryans561518 күн бұрын

  Nice! Thanks! I no longer have an N/A FB engine, but this would have been helpful when I did mine. I ended up taking off the snorkel in the front as well, and it's good to see that you don't have to.

• 
  @kuva201218 күн бұрын

  Thank you next time get a clean parking lot looks horrible

• 
  @johnmuzak20 күн бұрын

  Looks great! I had the front Mugen bar, and just found an used rear Mugen bar to complete the set. Your guide is pretty much the only detailed guide I've found on installing this bar.

• 
  @revcircle20 күн бұрын

  Thanks so much. Yeah, I couldn't find a good guide either but figure it out. So super glad it's helpful for other DC5 owners. Thanks for supporting my YT channel.

• 
  @markmiller975225 күн бұрын

  I installed the Weather Tech and I have noticable wind noise and the window would auto reverse at first until I got them fully seated in the seal. Seriously considering going to Subaru stock.

• 
  @revcircle25 күн бұрын

  I have stock and there really is no significant difference in noise when I didn’t have them. OEM is solid

• 
  @unknownuser-ff2xx26 күн бұрын

  i touched the amp wire with the rga cable for the back up camera, it sparked and turned off my whole system and it won’t turn on

• 
  @revcircle26 күн бұрын

  You might have blown a fuse. Might want to check your fuse boxes to check

• 
  @omarmorales3075Ай бұрын

  You don’t have to cut the plastic just take out piece of metal( bracket ) that have the bolts and there fee more bolts on the bottom

• 
  @revcircleАй бұрын

  Mostly cut it so that the mugen mid bar doesnt push the plastic too far out.

• 
  @2moomoo11Ай бұрын

  I always crack open the fill cap before I drain to help it drain (and to ensure you can fill it before you drain all the fluid out). Also I've always heard to never use a wrench when tightening the oil filter as they become harder to get off with heat cycles. I've always gone snug plus 1/2-3/4 turn, never letting myself try to really muscle it though. Too tight can split the rubber ring on cheaper filter, and worse case scenario is stripping the oil filter housing threads

• 
  @revcircleАй бұрын

  Good best practices tips.

• 
  @juansaladzarАй бұрын

  Give it a few yrs & that trunk will close easily I’ve had my 2020 Nightshade since 2020 brah

• 
  @revcircleАй бұрын

  Good to know that the trunk closing gets better over time. Appreciate the tip

• 
  @daftthepunkАй бұрын

  Um nice car

• 
  @revcircleАй бұрын

  thanks

• 
  @isaaccervantes2462Ай бұрын

  Can you just spray carb cleaner in it ?

• 
  @revcircleАй бұрын

  Not in throttle body, but the IACV below it. Spraying generally doesnt go to that area to get rid of the build up.

• 
  @prcc8793Ай бұрын

  Where i can find those exact emblems?thanks

• 
  @revcircleАй бұрын

  the 02-04 red DC5r front emblem is no longer in production, its been discontinued. You can still get the rear emblem and 05-06 front emblem. I usually order mine at ICB: www.icbmotorsport.com/indc5tyr021.html

• 
  @prcc8793Ай бұрын

  Mine is at the shop right now, changing color from milano red to artic blue pearl, Beautiful color🎉

• 
  @revcircleАй бұрын

  Can wait to see it. Add me on IG.

• 
  @coolcat6149Ай бұрын

  Question, isn’t the water nozzle for the rear window wiper on the roof? How does this effect it?

• 
  @revcircleАй бұрын

  yeah, the rear nozzle is there. Mine no longer works, but I assume it'll disrupt the spray pattern for folks that have it working

• 
  @liferx4343Ай бұрын

  Wish the hatchback came with a nightshade edition

• 
  @revcircleАй бұрын

  I thought there was a nightshade hatch?

• 
  @liferx4343Ай бұрын

  @@revcircle oh wow, you are right. It looks like a Corolla GR, I just never seen one. Well hatchback or not your car is sharp.

• 
  @revcircleАй бұрын

  @@liferx4343 thanks for the compliment. Loving the car

• 
  @jon-umberАй бұрын

  "It accelerates quite nicely" My brother this car is slower than dirt but that's not why we're here.

• 
  @a2army87129 күн бұрын

  Is the nightshade slower than the normal toyota corolla hybrid?

• 
  @simplicit9737Ай бұрын

  How does it sound now?

• 
  @revcircleАй бұрын

  Sound is great, its using the OEM speakers, but more control with the interface. However, the ATOTO unit does get a bit slow sometimes, some latency in clicks. Probably the unit isnt super fast in processing/RAM

• 
  @simplicit973710 күн бұрын

  Sounds good great video btw. Just ordered all the parts on your link

• 
  @revcircle10 күн бұрын

  @@simplicit9737 Thanks for the support. Helps me keep going with other videos.

• 
  @aynjooАй бұрын

  My outer tie rod is stuck to the inner, and the inner tie rod spins, so i cant get a grip…

• 
  @revcircleАй бұрын

  Sometimes you can use pb blaster on it to loosen it

• 
  @aynjooАй бұрын

  @@revcircle i did, and torch still stuck, thanks for the tip tho, and great video.

• 
  @ezoristАй бұрын

  This should work with a base 2005 rsx right

• 
  @revcircleАй бұрын

  Yes, they share the same components

• 
  @wholewheat1Ай бұрын

  I have this exact car on order, should be here in a few weeks. So excited for that mpg. Been driving my Tacoma daily getting around 17-18 mpg. Seeing this thing get about 50 mpg has my wallet thanking me. Great review thanks for taking the time to show everything inside and out

• 
  @revcircleАй бұрын

  That's awesome, hope you enjoy the car when it arrives. The MPG is good, but now that I've driven for a few months, I'd say it gets around 400ish per tank if im driving in eco mode. I, however, have a heavy foot. Thats still way more oprtimized than 17-18 mpgs. Glad my video was helpful. Thank you for supporting my channel.

• 
  @KC-ut7wh22 күн бұрын

  Hi . How is your car and mpg ?

• 
  @revcircle10 күн бұрын

  @@KC-ut7wh It's good for a hybrid. Gets me about 405 miles to a tank. The tank is tiny, only 8 gallons. I wish it was bigger but it still gets alot out of a tank. Roughly 41-42ish mpg, but I leave it on normal to sport mode often just to get acceleration. Eco mode is pretty slow. Car is doing well, it's a solid commuter car and I think it looks great and ride quality is smooth. This of course is me comparing it to my other cars which have sport / track suspension.

• 
  @braydonore5157Ай бұрын

  Speak up can't hear anything your saying

• 
  @Rx7_T51RАй бұрын

  Thanks I’m going to do it my self I got a le hybird 24 also Toyota wants me to wait till 10k I don’t feel good waiting that long imma just change it every 5k. Imma also change it at 1200 miles I’m at 1250 imma order everything online make sure I got everything oem so Toyota won’t say nothing don’t want my warranty getting voided.

• 
  @revcircleАй бұрын

  Yeah, they say their oils are more efficient, but agree - 10k is far out. Some folks I know mentioned you get more oil burning around 100k miles if you don't do frequent oil changes. Whether or not any of that is true, I want my car to last a long time and it doesn't hurt to make it more efficient with clean oil. I'm also going to do 5k mile intervals.

• 
  @KevoF06Ай бұрын

  Does this fit s2000?

• 
  @revcircleАй бұрын

  If your current plug is M14 x 1.5 drain bolt pattern. Skunk2 says it's for all Hondas and Acuras with that size.

• 
  @benjipc3672Ай бұрын

  looks great Sir keep it going !!!!!

• 
  @revcircleАй бұрын

  Appreciate the nice note. Thank you brother.

• 
  @tommystrelnikoff5753Ай бұрын

  Hey bro a few videos ago you installed the outside door trim that runs along the top of the window and down the b pillar. In the video you didn't take of the b pillar cover and the seal didn't fix into the jam properly half way down the b pillar. How did you fix this and how did you take off the B pillar? I have just installed them on my blue dc5 and have this issue. I can see in this video that the seal is fixed.

• 
  @revcircleАй бұрын

  I was careful and I was able to lift it slightly with some plastic trim tools to put the rubber seal in with out removing the trim sash / b-pillar section you mentioned. That area is held down by two white clips that are pretty fragile. If you can do that, it might solve your problem. Hope that helps

• 
  @kushacres2362Ай бұрын

  Fireee

• 
  @revcircleАй бұрын

  Thank you!

• 
  @jonathanmartinez3412Ай бұрын

  what’s the blue tape for?

• 
  @revcircleАй бұрын

  Just to put a bit of pressure the first day of install to ensure a strong seal. Took off the blue tape after. I also replaced the insulating one of the pieces on the window

• 
  @kibawhitefang7176Ай бұрын

  I thought coilovers would be adjusted from the top 🫢

• 
  @revcircleАй бұрын

  It surprised me as well

• 
  @dnewnovaАй бұрын

  just bought my 2024 se hybrid AWD thanks for posting this

• 
  @revcircleАй бұрын

  You’re welcome

• 
  @virgilarce2 ай бұрын

  Tienes algún beneficio con esas rótulas ? Baja un poco la suspensión frontal o no cambia la altura de la llanta con el salpicadero después de la instalación ?

• 
  @musicfashionstyle92692 ай бұрын

  Can it be fit with Acura TSX 2009

• 
  @revcircle2 ай бұрын

  Yes, Should fit. It suppose to fit all Honda-Acura k engines. M14 x 1.5

• 
  @dtbreally27352 ай бұрын

  Still got the black door panels I’ll buy them

• 
  @revcircle2 ай бұрын

  Sold them last month. Wish I knew.

• 
  @revcircle2 ай бұрын

  Any other parts you looking for?

• 
  @STREETFIGHTER502 ай бұрын

  Nice! I’d dump out the original fill ASAP as well! And 5k OCI’s is what I do with all our cars. That Toyota will last you forever 👍🏽👍🏽

• 
  @richrollin252 ай бұрын

  This is the best guide I’ve seen on KZread very thorough

• 
  @revcircle2 ай бұрын

  Thank you for the kind note. Appreciate the support

• 
  @ackerrj2 ай бұрын

  Very straightforward and clear. I am suppressed that you did not use a torque wrench on the drain plug, to be sure and get it right. Do you have the torque spec?

• 
  @revcircle2 ай бұрын

  For exact torque spec for oil drain plug for this Toyota Corolla, I'm not sure. There are Toyota forums that have a range between of 20-30, but if you find out, let me know as I'm curious. I always very lightly hand torque and rely on the crush washer for most of my cars. My philosophy is better to under torque than to strip the the drain pan. And I can tighten more if there are leaks after warm up which it usually never does. I'm sure other folks have different opinions. I just tried looking up on the toyota site service manual, but it only mentions wheel torque spec at 76 ft lbs, but no mention of torque of the drain plug: www.toyota.com/owners/warranty-owners-manuals/

• 
  @revcircle2 ай бұрын

  More research, Amsoil website mentions 27 ft/lbs for the drain plug for a 1.8L corolla engine. Hope that helps yah on your DIY journey. See that here: www.amsoil.com/lookup/auto-and-light-truck/2024/toyota/corolla/1-8l-4-cyl-engine-code-2zr-fxe-5/

• 
  @98XC113 күн бұрын

  ​@revcircle that's a great service to the community. Thanks for following on torque

• 
  @tommyhajimoto69682 ай бұрын

  Yeah I just bought the ball joint installer and I was watching you on how you installed it. I don't think I would have figured it out thank you much easier because everything's in the way if you use the other side.

• 
  @revcircle2 ай бұрын

  Yeah, took me a bit to figure it out but figure it was useful to document. Glad my video helped and thanks for supporting my channel. Keeps me motivated to keep going

• 
  @ThaKenMan2 ай бұрын

  It’s actually because of the spring specs. The hight and coil thickness. Those look like 5 or 6 inch springs for a DC5. So for the hight they made em broke. Blue 7in Swift springs are a thing. Love that you got Fortunes tho. I have em on my Civic Si.

• 
  @sr20dett100017 күн бұрын

  Incorrect. Blue is 60mm ID and orange is 65mm ID.

• 
  @prcc87932 ай бұрын

  25mm all around

• 
  @revcircle2 ай бұрын

  Yep, 25mm all around

• 
  @prcc87932 ай бұрын

  @@revcircle thanks

• 
  @revcircle2 ай бұрын

  @@prcc8793 you’re welcome. Btw my wheels are the dc5r so the offset is 60mm. Stock type s wheels being 45mm I needed at least 15mm spaced to bring it back to normal, but the extra 10mm in the 25mm spacer makes it look good.

• 
  @DCbuildz2 ай бұрын

  And dude! That’s insane it doesn’t have a snap ring 😮

• 
  @revcircle2 ай бұрын

  yeah, i wanted a snap ring. But I needed a replacement fast and it was the only one in stock. Was considering eventually swapping out with a ktuned or hardrace but alot of them are on backorder. It is however still holding up well, about 2000 miles on it and its still working

• 
  @DCbuildz2 ай бұрын

  Hey brother it’s “cotter” pin not “cottyer” pin lol

• 
  @revcircle2 ай бұрын

  Thanks for the correction. I'm bad with that stuff so will correct it.