seems to me he should be 90 degrees from where he is,,,,alll the material he dumps is in misalignment with the grinder and energy is used when the machine has to turn it all around to enter the feed head,,,,id think you could save time and fuel by positioning the loader better
@nuriababotbergada93602 жыл бұрын
Y
@nomerc36082 жыл бұрын
A very inexperienced operator! How many operators would load a truck like this?
@funli502 жыл бұрын
。
@troymcnair45463 жыл бұрын
The reason he not loading alot on the belt is to not damage the machine.
@paulmead26013 жыл бұрын
Slow and steady. Could do with a different grabber.
@wendymorrison58033 жыл бұрын
This looks a bit dainty. The grabs are small here. Most excavator operators know that time is money. The grinder can handle a lot more. Not showing the potential at all.
@gibmelson76283 жыл бұрын
heeey, show us the shredder shredding and the shredded material... this here is boring!
@BluntedBaboon3 жыл бұрын
where I live its amazing to see debris so well sorted. Everything here just mixed and dumped.
@Revellersaws3 жыл бұрын
How does the truck driver know to pull forward?
@cditzler63133 жыл бұрын
must be a rental because to ignore the clearly a big bolt or grinder tooth rattling around sound at the 12min mark
@dakotaholcomb4843 жыл бұрын
Cake job
@mrDNS13373 жыл бұрын
could have positioned the shredder or the loader better so he could feed it perpendicular
@samkom333 жыл бұрын
my thoughts too.
@satan21334 жыл бұрын
First you get good then you get fast nothing is being abused he is safe that’s all that matters you pick up tricks along the way good job 👍
@cditzler63133 жыл бұрын
thank you satan
@Boodieman724 жыл бұрын
I'd love to run the chipper / grinder
@richwielechowski51914 жыл бұрын
Does the shredder have a magnet to keep the metal out of the finished product?
@cditzler63133 жыл бұрын
yeah no kidding cuz I heard a bunch of metal going thru haha big metal
@bunnywarren3 жыл бұрын
Yes, it's over the outfeed conveyor. It's visible just to the left of the engine with the belt going around.
@9Enrico04 жыл бұрын
Where is used the chipped wood?
@jonathandesselle44644 жыл бұрын
Everybody saying wheel loader Well tip...trackhoe smoother to operate..can break material down faster so looks like less but u feeding wood not air...loader is good but to rough more fuel and less WOOD in machine bc of material size and the pile is packed pretty good so safety of boards taring hoses stuff like that up on loader compared to trackhoe....operator is smooth and not overloading both machines so my opinion he is worth the right operator.
@nathankauffman23244 жыл бұрын
Good video would love to have that job
@quezgang4 жыл бұрын
Y u didn't use the wheel loader
@gregbschultz56614 жыл бұрын
another very boring clip
@shijiazhuanghanjiutechnolo39974 жыл бұрын
my hydraulic motor is used in your machinery: crusher, conveyor belt, crushing screen and other mining machinery
@williamclements32664 жыл бұрын
Another boring video! Aren’t we watching the shredder rather then the loader???
@Radionut4 жыл бұрын
I didn’t see any pallets get ground
@Radionut4 жыл бұрын
Hey that was a great job by the loader. I preferred to see the grinder in action though. Great video new subscriber here
@nicolasm32174 жыл бұрын
C'est pas un nerveux, il en prend petit-peu par petit-peu. Un Suisse quoi ?!
@didi54jbdidi174 жыл бұрын
Ouai c'est clair, et il à peur de bourrer la machine ou quoi ... ? Ah ah :)
@quezgang5 жыл бұрын
Can sum of yall stop complaining bout everything damn let he do it how he do it he dont need yall telling how to do it
@ThisisMindoMint5 жыл бұрын
bigger scoops man. Your wasting money and time. WTF is this. Makes me mad. Cant watch
@nickb28335 жыл бұрын
Well, that was fuckn exciting!!! Pigs arse
@jimsvideos72015 жыл бұрын
Looks like the sort of job where you could get good mileage out of a pair of noise-cancelling headphones and the good coffee you made at home.
@samkom335 жыл бұрын
many here in the comments say he could have fed faster and taken more each time, and so on.. but ill say he do a GOOD JOB... he keeps up with the chipper WITHOUT OVERFEEDING.
@edkroon59008 ай бұрын
Qer
@robertmceachern24285 жыл бұрын
Of note... How'd they get so much chipped saw dust under the receiver??
@Rickimusic5 жыл бұрын
I see that on some machines. No idea why, a design flaw or intentional, who knows. The metal in the blades made me cringe.
@manuelmartin88903 жыл бұрын
You can see the dust being moved by the conveyer after being blown back out at the chipper head .
@robertmceachern24285 жыл бұрын
It was so messy of him to load perpendicular to the chipper. Seemed more was falling over the sides then in the receiver. All he need do is move with the truck to his back and probably wouldn't have lost a board. Or, work between the pile and the receiver.
@user-rw7jj7hf5z5 жыл бұрын
重機とクラッシャーの位置関係が悪いわ
@roycemyers27775 жыл бұрын
Now all you need is an operator
@user-xj8nx6lq6c5 жыл бұрын
Треть часа одно и тоже
@budrespini5 жыл бұрын
Where is this at.?
@johnm.evangelis6935 жыл бұрын
That required a grapple either on a CAT Front end Loader or an above four prong grapple. Sometimes you do with what you have!!!
@jamesrivis6206 жыл бұрын
Too much repetitive video. How about filming other parts of the operation.
@brianreed70066 жыл бұрын
sucks at loading
@vk6fwcbpt6 жыл бұрын
I would of used the loader in the background faster neater job.
@tomlowe85636 жыл бұрын
Not very good at loading it bits falling everywhere and not in machine
Пікірлер
seems to me he should be 90 degrees from where he is,,,,alll the material he dumps is in misalignment with the grinder and energy is used when the machine has to turn it all around to enter the feed head,,,,id think you could save time and fuel by positioning the loader better
Y
A very inexperienced operator! How many operators would load a truck like this?
。
The reason he not loading alot on the belt is to not damage the machine.
Slow and steady. Could do with a different grabber.
This looks a bit dainty. The grabs are small here. Most excavator operators know that time is money. The grinder can handle a lot more. Not showing the potential at all.
heeey, show us the shredder shredding and the shredded material... this here is boring!
where I live its amazing to see debris so well sorted. Everything here just mixed and dumped.
How does the truck driver know to pull forward?
must be a rental because to ignore the clearly a big bolt or grinder tooth rattling around sound at the 12min mark
Cake job
could have positioned the shredder or the loader better so he could feed it perpendicular
my thoughts too.
First you get good then you get fast nothing is being abused he is safe that’s all that matters you pick up tricks along the way good job 👍
thank you satan
I'd love to run the chipper / grinder
Does the shredder have a magnet to keep the metal out of the finished product?
yeah no kidding cuz I heard a bunch of metal going thru haha big metal
Yes, it's over the outfeed conveyor. It's visible just to the left of the engine with the belt going around.
Where is used the chipped wood?
Everybody saying wheel loader Well tip...trackhoe smoother to operate..can break material down faster so looks like less but u feeding wood not air...loader is good but to rough more fuel and less WOOD in machine bc of material size and the pile is packed pretty good so safety of boards taring hoses stuff like that up on loader compared to trackhoe....operator is smooth and not overloading both machines so my opinion he is worth the right operator.
Good video would love to have that job
Y u didn't use the wheel loader
another very boring clip
my hydraulic motor is used in your machinery: crusher, conveyor belt, crushing screen and other mining machinery
Another boring video! Aren’t we watching the shredder rather then the loader???
I didn’t see any pallets get ground
Hey that was a great job by the loader. I preferred to see the grinder in action though. Great video new subscriber here
C'est pas un nerveux, il en prend petit-peu par petit-peu. Un Suisse quoi ?!
Ouai c'est clair, et il à peur de bourrer la machine ou quoi ... ? Ah ah :)
Can sum of yall stop complaining bout everything damn let he do it how he do it he dont need yall telling how to do it
bigger scoops man. Your wasting money and time. WTF is this. Makes me mad. Cant watch
Well, that was fuckn exciting!!! Pigs arse
Looks like the sort of job where you could get good mileage out of a pair of noise-cancelling headphones and the good coffee you made at home.
many here in the comments say he could have fed faster and taken more each time, and so on.. but ill say he do a GOOD JOB... he keeps up with the chipper WITHOUT OVERFEEDING.
Qer
Of note... How'd they get so much chipped saw dust under the receiver??
I see that on some machines. No idea why, a design flaw or intentional, who knows. The metal in the blades made me cringe.
You can see the dust being moved by the conveyer after being blown back out at the chipper head .
It was so messy of him to load perpendicular to the chipper. Seemed more was falling over the sides then in the receiver. All he need do is move with the truck to his back and probably wouldn't have lost a board. Or, work between the pile and the receiver.
重機とクラッシャーの位置関係が悪いわ
Now all you need is an operator
Треть часа одно и тоже
Where is this at.?
That required a grapple either on a CAT Front end Loader or an above four prong grapple. Sometimes you do with what you have!!!
Too much repetitive video. How about filming other parts of the operation.
sucks at loading
I would of used the loader in the background faster neater job.
Not very good at loading it bits falling everywhere and not in machine
Can u let him do it How he do it
Too bad we did not get a close-up..
8th 05gu
Lesz folytatása
What'd you use to take the video.
GoPro
Nice video!
🛢🛢🚙🚤first one also has Mexico’s