Cool! What year ninja 650 shock fits on it ? Z650 or 650r ? (Not sure if they’re different).
@Renaissance_cycles12 күн бұрын
Just picked up an R3 a couple weeks ago for the kart track and can’t wait to see whatcha gonna do !!!
@user-uf4ft1dk9c15 күн бұрын
You are so handsome
@ddmaddma-ml4zh15 күн бұрын
Can you link the exact clipons so I don't order the wrong thing?
@aluisious16 күн бұрын
Did you CUT handlebar risers off your clamp?
@nikomijat776016 күн бұрын
Could you please tell me (maybe a link) where you got the brackets for the selfie stick from (for the rear peg cover)?? 🙏🏼🙏🏼
@muhammedikbalbuyukkidan946221 күн бұрын
motor koruma takozunu nerden aldın ?
@pinoykillaz43827 күн бұрын
So rs3 is higher?
@popdatclutch301028 күн бұрын
I still want one 😂
@PurepresaАй бұрын
Great bike and riding!!
@tjthenovicerider1138Ай бұрын
I love that fusion of naked and faired sportbike.
@joshdegol8067Ай бұрын
That happened to my tuono 660. They fixed it at no cost
@undrwrldsk8fredАй бұрын
Why’s the tire so skinny?
@elamaaran38834 күн бұрын
For track usage and speed
@YangCalgaryАй бұрын
Excellent! Exactly the information I needed. Thanks!
@OddxduckyАй бұрын
What mirror is that?
@alessandroravotti1622Ай бұрын
Come si può fare questo a una piastra di sterzo invece di cambiarla. Criminale
@user-uf4ft1dk9cАй бұрын
Shame on all of you.... You are not supposed to apex on that first turn and only blend in until after turn 2
@user-uf4ft1dk9cАй бұрын
Teach me your ways!
@mrcristinistorАй бұрын
Looks exactly like mine! 😊
@Renaissance_cyclesАй бұрын
Looks like it was a great day!! 🙏🤘
@olie6539Ай бұрын
Lovley bike, dont a few of the same mods on mine! What is the tank pads your using and where you find that dope lil mirror?
@sancoblancoАй бұрын
Hello, do you have the part nr for the updated shifter joint? I also wonder if you have secured (using wire with small drill holes) or checked your oil pressure relief valve since you got the bike? I see that some people are really unlucky, if it comes lose it can destroy your engine.
@gmc35782 ай бұрын
your shift rod is about 1/2" too short - looks like!... the shift linkage arm needs to be near 90 degrees angle / straight out to the side in relation to the foot lever direction for proper shifts to happen! (foot lever angle and shift linkage angle should look in "parallel" - not as you have it here!) (fyi!)
@suh_slow69022 ай бұрын
Hey, yeah, I know the rule of thumb is perpendicular/90 degrees for the joint/shift rod connection. However, with the aftermarket rearsets, it's rather better to have it at the angle I show in the video; where I have equal amount of travel for up and down shifts. But yeah, you're right, however, it's also a general baseline/recommendation, not an obligation to your shifter setting. at the end of the day, if it works, it works; it could be rider's preference too. once again, thanks for your feedback, really appreciate it and I hope others read it too! 😁
@astarmoto2 ай бұрын
Did the shift shaft support make a difference?
@suh_slow69022 ай бұрын
honestly... no, i dont feel the difference... compared to my previous bikes that have had the shift support. but it looks cool and adds a good red accent to the bike hehe
@tryhardgamerthg56632 ай бұрын
looks sweet how did your freind get baffle out the extreme sc? Its welded in crazy well
@jjohnnyqquest79002 ай бұрын
Same problem with my bike !!RS 660 2023 . Problems with quick shifting, always goes to neutral. Annoying 😡 AF !!!
@jaymeazevedo24822 ай бұрын
Very cool
@GarageAddiction2 ай бұрын
Gratz on the podium! Was Jordan ok after that off? That looked gnarly!
@suh_slow69022 ай бұрын
oh yeah, he stood it up!
@GarageAddiction2 ай бұрын
@@suh_slow6902 Nice, wish I could have made this round! Also you're making me want a 450 haha
@suh_slow69022 ай бұрын
@@GarageAddiction do eeeeeet. lez party hardy togetherrrrrr
@jaymeazevedo24822 ай бұрын
I got 2 2023 husky for sale lol
@GarageAddiction2 ай бұрын
You're all enablers haha
@jamesesguerra232 ай бұрын
So sikk 🤩🔥🔥
@suh_slow69022 ай бұрын
haha thanks bruh!
@jayala46622 ай бұрын
What’s the triangle exclamation mark and arrow, how does it turn off ?
@LetsRock1t2 ай бұрын
Hello, unlike the Tuono 660, is the sports glass longer or did you change it?
@Anthony-hc9ib2 ай бұрын
I love it! Have a 21 zx6r. I love that but that rc660 and your bike have much better tech. Better brakes. Better comfort. 2 yr warranty vs one. Best is the price ❤ next bike rc660
@alexv55817 күн бұрын
What the hell is a rc660 ??
@verdeboyo2 ай бұрын
Looks amazing with race clip-ons!
@astarmoto2 ай бұрын
Does the shift support make a difference?
@valeriobenvenuti34452 ай бұрын
Wally from Italy... what kind of windshield do you mount? thank you...
@Smoove2332 ай бұрын
Hey man what airbag vest is that attached to your back?
@astrofeeder7772 ай бұрын
I love the aprilia tuono, I’d get one if they lasted more than 5-10k miles
@orhan14oglu3 ай бұрын
is this bike reliable?
@suh_slow69022 ай бұрын
So far it’s been great for me! Even raced a season with it and no issues thus far!
@orhan14oglu2 ай бұрын
@@suh_slow6902 great 👍
@quadecurtus54303 ай бұрын
What’s your rpm shift at?
@suh_slow69023 ай бұрын
Hey! I typically try to shift anywhere above 10,000 RPM... until i feel the power plateau haha (i don't usually look)
@minodellarocca97613 ай бұрын
bravissimo👍👍👍
@martinserna76823 ай бұрын
Bro thank you for the inspiration I think I'm going to now build one of these
@faustinepimento2983 ай бұрын
The sound😍❤️
@qukak1233 ай бұрын
works with the app fields area ?😊
@suh_slow69023 ай бұрын
yeah, it works well once the standalone mode is on!
@fredericlaurent69993 ай бұрын
Hi, what camera use ? And what set up please ? Ride safe ✌️
@suh_slow69023 ай бұрын
hi, this was a gopro setup with ND filter.
@smak9373 ай бұрын
Where did you get the case cover I looked a little on line and didn’t see anything
@suh_slow69023 ай бұрын
The case covers I have are called T-rex
@smak9373 ай бұрын
My water pump leaks 2022 1600 miles
@suh_slow69023 ай бұрын
damn, that's a bummer!
@dutch_martyr3 ай бұрын
Dude how do I do this to my 2022 RS660??
@suh_slow69023 ай бұрын
UpMap, the maps have the Euro turn signal programmed, so it works from the DRL.
@stephanemaldonado59274 ай бұрын
Thanks bro ...
@chrisdunham29114 ай бұрын
the problem is with how much force you are applying when you are shifting....apply just enough pressure to "crack" an egg instead of trying to s "stomp" a cockroach
Пікірлер
How do you Mount the usb bracket ?
Cool! What year ninja 650 shock fits on it ? Z650 or 650r ? (Not sure if they’re different).
Just picked up an R3 a couple weeks ago for the kart track and can’t wait to see whatcha gonna do !!!
You are so handsome
Can you link the exact clipons so I don't order the wrong thing?
Did you CUT handlebar risers off your clamp?
Could you please tell me (maybe a link) where you got the brackets for the selfie stick from (for the rear peg cover)?? 🙏🏼🙏🏼
motor koruma takozunu nerden aldın ?
So rs3 is higher?
I still want one 😂
Great bike and riding!!
I love that fusion of naked and faired sportbike.
That happened to my tuono 660. They fixed it at no cost
Why’s the tire so skinny?
For track usage and speed
Excellent! Exactly the information I needed. Thanks!
What mirror is that?
Come si può fare questo a una piastra di sterzo invece di cambiarla. Criminale
Shame on all of you.... You are not supposed to apex on that first turn and only blend in until after turn 2
Teach me your ways!
Looks exactly like mine! 😊
Looks like it was a great day!! 🙏🤘
Lovley bike, dont a few of the same mods on mine! What is the tank pads your using and where you find that dope lil mirror?
Hello, do you have the part nr for the updated shifter joint? I also wonder if you have secured (using wire with small drill holes) or checked your oil pressure relief valve since you got the bike? I see that some people are really unlucky, if it comes lose it can destroy your engine.
your shift rod is about 1/2" too short - looks like!... the shift linkage arm needs to be near 90 degrees angle / straight out to the side in relation to the foot lever direction for proper shifts to happen! (foot lever angle and shift linkage angle should look in "parallel" - not as you have it here!) (fyi!)
Hey, yeah, I know the rule of thumb is perpendicular/90 degrees for the joint/shift rod connection. However, with the aftermarket rearsets, it's rather better to have it at the angle I show in the video; where I have equal amount of travel for up and down shifts. But yeah, you're right, however, it's also a general baseline/recommendation, not an obligation to your shifter setting. at the end of the day, if it works, it works; it could be rider's preference too. once again, thanks for your feedback, really appreciate it and I hope others read it too! 😁
Did the shift shaft support make a difference?
honestly... no, i dont feel the difference... compared to my previous bikes that have had the shift support. but it looks cool and adds a good red accent to the bike hehe
looks sweet how did your freind get baffle out the extreme sc? Its welded in crazy well
Same problem with my bike !!RS 660 2023 . Problems with quick shifting, always goes to neutral. Annoying 😡 AF !!!
Very cool
Gratz on the podium! Was Jordan ok after that off? That looked gnarly!
oh yeah, he stood it up!
@@suh_slow6902 Nice, wish I could have made this round! Also you're making me want a 450 haha
@@GarageAddiction do eeeeeet. lez party hardy togetherrrrrr
I got 2 2023 husky for sale lol
You're all enablers haha
So sikk 🤩🔥🔥
haha thanks bruh!
What’s the triangle exclamation mark and arrow, how does it turn off ?
Hello, unlike the Tuono 660, is the sports glass longer or did you change it?
I love it! Have a 21 zx6r. I love that but that rc660 and your bike have much better tech. Better brakes. Better comfort. 2 yr warranty vs one. Best is the price ❤ next bike rc660
What the hell is a rc660 ??
Looks amazing with race clip-ons!
Does the shift support make a difference?
Wally from Italy... what kind of windshield do you mount? thank you...
Hey man what airbag vest is that attached to your back?
I love the aprilia tuono, I’d get one if they lasted more than 5-10k miles
is this bike reliable?
So far it’s been great for me! Even raced a season with it and no issues thus far!
@@suh_slow6902 great 👍
What’s your rpm shift at?
Hey! I typically try to shift anywhere above 10,000 RPM... until i feel the power plateau haha (i don't usually look)
bravissimo👍👍👍
Bro thank you for the inspiration I think I'm going to now build one of these
The sound😍❤️
works with the app fields area ?😊
yeah, it works well once the standalone mode is on!
Hi, what camera use ? And what set up please ? Ride safe ✌️
hi, this was a gopro setup with ND filter.
Where did you get the case cover I looked a little on line and didn’t see anything
The case covers I have are called T-rex
My water pump leaks 2022 1600 miles
damn, that's a bummer!
Dude how do I do this to my 2022 RS660??
UpMap, the maps have the Euro turn signal programmed, so it works from the DRL.
Thanks bro ...
the problem is with how much force you are applying when you are shifting....apply just enough pressure to "crack" an egg instead of trying to s "stomp" a cockroach