Bill I pulled my stock engine and put a full Mod OBR and your rig looks faster then mine may be higher Rpm is better or I can't tune for shit
@billanagnou31869 күн бұрын
@@ryansivels Hi, this is apparently a CY 23cc engine. I bought it as is. My friend has the same engine in a Rovan shorty and it’s really quick in that too. They do rev hard. I’ve seen obr’s hammer, always wanted one for my bajas etc lol Maybe gearing/pipe etc too could make a difference
@tonysands283713 күн бұрын
Awesome bro smoke those wheels up 🤜🔥🇦🇺💥💯
@tonysands283713 күн бұрын
Damn bro that is crazy awesome job bro 🤜
@billanagnou318613 күн бұрын
@@tonysands2837 thanks mate yeah I loved it. Need a bigger area for it though
@Nitro_rc_lifeАй бұрын
Is it OK to add your channel to my list on the nitro rc life page on Facebook
@billanagnou3186Ай бұрын
Hi. Yes of course, that will be fine thank you
@Nitro_rc_lifeАй бұрын
Whoot whoot for the short course
@SmithfieldWheelsАй бұрын
☕☕Good morning, Do cylinder sleeves remove easily and do you replace any other parts in the block during the procedure like rods & bearings? Awesome truck by the way!! +cool factor points for the reverse function!!👍👍
@billanagnou3186Ай бұрын
Good morning mate They usually do come out easy, I use a zip tie through the exhaust outlet and turn the flywheel. Usually pops them straight out Then I’ve had others that just won’t budge, use extreme heat etc and still can’t get them out. Had people put them in a vice with small bit of wood and knock them out It’s a good time to inspect everything and change as needed Everything else was good on this so it wasn’t required Traxxas 3.3 engines it’s advised to change the rod out as they tend to split Thanks I’ve been searching for one of these for a long time Tuned up nicely now after the break in and it flies. I’ll do another video with it Hoping to find a nice open dirt area to take it to
@lisamcevoy6221Ай бұрын
That looks fun.
@SmithfieldWheelsАй бұрын
Very nice Kosho! I like the sound of that 28 engine.👍👍
@tonysands2837Ай бұрын
Nice bro my next car 🤜
@korc2157Ай бұрын
Thats gold mate👍
@billanagnou3186Ай бұрын
Thanks mate. These have been really fun
@korc2157Ай бұрын
@@billanagnou3186 looks like a blast mate. Just need to do a nitro conversion on one of them😎
@billanagnou3186Ай бұрын
@@korc2157haha would love to. Keeping an eye out for a nitro dirt bike
@tonysands2837Ай бұрын
lol they are getting more popular lol 😂 🤜🔥💯💥🇦🇺
@billanagnou3186Ай бұрын
Our own bikie club soon lol
@tonysands2837Ай бұрын
Nice bro just to quite lol
@billanagnou3186Ай бұрын
Haha I know Neighbours are thankful though lol
@tonysands28372 ай бұрын
Nice bro but damn that nitro is quite lol 😂 nice looking rig mate 🤜💥🇦🇺🔥💯
@billanagnou3186Ай бұрын
Haha after running 3 back to back tanks on the Savage XL with Lrp my ears welcomed the quiet lol
@hybrid324942 ай бұрын
Hey man, I’m glad you finally got this thing shifting. I will most likely have to pull out that whole two speed and try to readjust it, trying to do it with it installed in the car was just not working out.
@billanagnou31862 ай бұрын
Hey bro thanks Yes I found it much easier to pull it out and do it so I could see where it was set from factory too I left a description in the comment below how I did it and it worked for me Slight adjustments afterwards to get it to shift earlier
@terrydancer10662 ай бұрын
Are these still available?
@billanagnou31862 ай бұрын
Keep an eye on eBay or marketplace they come up for sale occasionally Not available new anymore unfortunately
@tonysands28372 ай бұрын
Double power bro awesome 🙌
@Chino-vn3ot2 ай бұрын
Thanks for sharing Sounds good
@SmithfieldWheels2 ай бұрын
I did not know the pro moto could do that. whatever sorcery thats in there seems to work very well!
@billanagnou31862 ай бұрын
Yeah it’s really cool how it works and manages to correct itself. It has a powerful gyro built into it Sounds like a jet starting up and takes ages to wind down once off
@SmithfieldWheels2 ай бұрын
unusual and marvelous atv! And the losi pro moto! super cool to see them both!!
@billanagnou31862 ай бұрын
Was really lucky to get this one These were never released in Australia apparently This was a demo given to someone to try prior to release but never eventuated
@allaspectsrc41782 ай бұрын
Nice u don't see to many of the ofna dominaters too much
@tonysands28372 ай бұрын
You look like you are having a lot of fun mate great to see
@billanagnou31862 ай бұрын
Except for the breakage lol. Lucky I have a parts car. It picks up the front end after changing into second gear, it’s nuts
@GODLIKEZ49024 күн бұрын
@@billanagnou3186 thats cute my race truggy does that with a 21 LMAO
@SmithfieldWheels2 ай бұрын
i love the sound of the gears shifting on the savage! the losi promoto is very cool and interesting as well.
@SmithfieldWheels2 ай бұрын
Man that gorgeous truck hauls! looks and sounds great ! #☝
@tonysands28372 ай бұрын
Hay mate that sounds great looks like you nailed the mixture 👍🔥💥🤜🇦🇺💯
@billanagnou31862 ай бұрын
Thanks mate yeah I’m real happy with it. Ran it through 5 of my nitros and all ran perfect. Barely touched the tune and dare say getting slightly longer run times too
@tonysands28372 ай бұрын
@@billanagnou3186 that’s really good news mate very happy for you awesome 🙌 work 👍
@tonysands28372 ай бұрын
lol that’s a great contest mate the both go hard
@billanagnou31862 ай бұрын
Thanks mate. They’re both fun.
@CrazyBrennoRC2 ай бұрын
Awsome bro it's pretty cool that rc bike, super cool 😎 how you can jump it too, love it man 😃💯💚🤘👍
@woodruffryder_dbb2 ай бұрын
What did you have to do to get it to shift I have the same issue with mine 🤦🏾♂️ I need to take it apart and stop being lazy 😂 I’ve just been running my nitro quad lately
@billanagnou31862 ай бұрын
Hi Haha I know the feeling Best to pull it out There’s 2 clutch shoes with 2 screws in each of them The Center screw you adjust so that the shoes sit about .5-1mm away from the housing Then pull the shoes apart with your hands and see how much tension there is. You want to be able to pull them apart with a bit of force but not too easy Pull the springs out to make sure they aren’t squashed or damaged first Try screwing them in until about half the cap head is sticking out from the top Then when in the car and you hear a shift you adjust the outer screws for the shift timing Make sure you adjust both same Bit of mucking around and a bit of time
@dodgerboy51093 ай бұрын
🆒 & ℹ️ have 8️⃣ HPI savage 2️⃣5️⃣ 🤑👍🏼🛻🏁
@allaspectsrc41783 ай бұрын
Nice ..don't see to many of those anymore..sounds great 👍🏿
@SmithfieldWheels3 ай бұрын
Hell yeah dude, awesome 👍👍👍
@SmithfieldWheels3 ай бұрын
Nice man, that thing is awesome 👍👍👍
@allaspectsrc41783 ай бұрын
Nice tons of power..what header and pipe u running
@tonysands28373 ай бұрын
Looks awesome bro you must have sold a few things to get that bro well done 🤜💯🇦🇺
@michaelinzitari3 ай бұрын
wow never seen a nitro buggy do this!
@allaspectsrc41783 ай бұрын
Nice!!!
@garyottonello87443 ай бұрын
So I just had to put metal gears in mine. It’s not shifting at all, and I noticed there aren’t the little pins on the inside of the gear that the clutch gets stuck on to engage, do you know what I’m talking about? Should I just loosen the shift point for both gears? It shifted fine with plastic gears at this current setting. Thanks for any help you may have.
@billanagnou31863 ай бұрын
Hi there, by memory it had a pin in there to engage. I’ll have to look again Good way to do it is one gear at a time Lock both gears fully closed then start with the second gear, coming out 1/4 turn each time until it engages and is where you like it Then start on the third gear Will take a bit of time but will get there But if it doesn’t have the pin or anything to lock into then it won’t shift Maybe ask where you bought it from as well Might be a casting error
@garyottonello87443 ай бұрын
@@billanagnou3186 I wish I could send you a screen shot because even the product photo doesn’t show the little rod on the inside of the gear for the clutch the grab on to. I’m not sure if metal against metal works (like in the engine clutch) but I can’t get it to shift, and it was shifting into all the gears just a few days ago with the plastic gears.
@SmithfieldWheels4 ай бұрын
Nice 👍
@malo_2134 ай бұрын
What a beauty…
@tonysands28374 ай бұрын
God you can hear the metal gear ⚙️ 🤜💯
@tonysands28374 ай бұрын
Goes hard mate 💯🤜
@tonysands28374 ай бұрын
Damn that’s got some power in it 💯🔥🤜
@SmithfieldWheels4 ай бұрын
That may or may not be finest wheelie anyone has ever done, on camera, with one of those. May as well remove the front wheels because they are just for looks at this point. 👍👍🏁🍻
@SmithfieldWheels4 ай бұрын
That thing does some epic wheelies at speed! 👍👍
@billanagnou31864 ай бұрын
Yeah it’s nuts, had no wheelie bar then and couldn’t go full throttle. Just wants to flip plus old tyres were ballooning like crazy
@user-zl4gi9ws4c4 ай бұрын
Круто
@malo_2134 ай бұрын
Still have mine! Are you running the GX21?
@billanagnou31864 ай бұрын
Nice! I am yeah. Original motor still going strong
Пікірлер
Very cool bro 🤜
Bill I pulled my stock engine and put a full Mod OBR and your rig looks faster then mine may be higher Rpm is better or I can't tune for shit
@@ryansivels Hi, this is apparently a CY 23cc engine. I bought it as is. My friend has the same engine in a Rovan shorty and it’s really quick in that too. They do rev hard. I’ve seen obr’s hammer, always wanted one for my bajas etc lol Maybe gearing/pipe etc too could make a difference
Awesome bro smoke those wheels up 🤜🔥🇦🇺💥💯
Damn bro that is crazy awesome job bro 🤜
@@tonysands2837 thanks mate yeah I loved it. Need a bigger area for it though
Is it OK to add your channel to my list on the nitro rc life page on Facebook
Hi. Yes of course, that will be fine thank you
Whoot whoot for the short course
☕☕Good morning, Do cylinder sleeves remove easily and do you replace any other parts in the block during the procedure like rods & bearings? Awesome truck by the way!! +cool factor points for the reverse function!!👍👍
Good morning mate They usually do come out easy, I use a zip tie through the exhaust outlet and turn the flywheel. Usually pops them straight out Then I’ve had others that just won’t budge, use extreme heat etc and still can’t get them out. Had people put them in a vice with small bit of wood and knock them out It’s a good time to inspect everything and change as needed Everything else was good on this so it wasn’t required Traxxas 3.3 engines it’s advised to change the rod out as they tend to split Thanks I’ve been searching for one of these for a long time Tuned up nicely now after the break in and it flies. I’ll do another video with it Hoping to find a nice open dirt area to take it to
That looks fun.
Very nice Kosho! I like the sound of that 28 engine.👍👍
Nice bro my next car 🤜
Thats gold mate👍
Thanks mate. These have been really fun
@@billanagnou3186 looks like a blast mate. Just need to do a nitro conversion on one of them😎
@@korc2157haha would love to. Keeping an eye out for a nitro dirt bike
lol they are getting more popular lol 😂 🤜🔥💯💥🇦🇺
Our own bikie club soon lol
Nice bro just to quite lol
Haha I know Neighbours are thankful though lol
Nice bro but damn that nitro is quite lol 😂 nice looking rig mate 🤜💥🇦🇺🔥💯
Haha after running 3 back to back tanks on the Savage XL with Lrp my ears welcomed the quiet lol
Hey man, I’m glad you finally got this thing shifting. I will most likely have to pull out that whole two speed and try to readjust it, trying to do it with it installed in the car was just not working out.
Hey bro thanks Yes I found it much easier to pull it out and do it so I could see where it was set from factory too I left a description in the comment below how I did it and it worked for me Slight adjustments afterwards to get it to shift earlier
Are these still available?
Keep an eye on eBay or marketplace they come up for sale occasionally Not available new anymore unfortunately
Double power bro awesome 🙌
Thanks for sharing Sounds good
I did not know the pro moto could do that. whatever sorcery thats in there seems to work very well!
Yeah it’s really cool how it works and manages to correct itself. It has a powerful gyro built into it Sounds like a jet starting up and takes ages to wind down once off
unusual and marvelous atv! And the losi pro moto! super cool to see them both!!
Was really lucky to get this one These were never released in Australia apparently This was a demo given to someone to try prior to release but never eventuated
Nice u don't see to many of the ofna dominaters too much
You look like you are having a lot of fun mate great to see
Except for the breakage lol. Lucky I have a parts car. It picks up the front end after changing into second gear, it’s nuts
@@billanagnou3186 thats cute my race truggy does that with a 21 LMAO
i love the sound of the gears shifting on the savage! the losi promoto is very cool and interesting as well.
Man that gorgeous truck hauls! looks and sounds great ! #☝
Hay mate that sounds great looks like you nailed the mixture 👍🔥💥🤜🇦🇺💯
Thanks mate yeah I’m real happy with it. Ran it through 5 of my nitros and all ran perfect. Barely touched the tune and dare say getting slightly longer run times too
@@billanagnou3186 that’s really good news mate very happy for you awesome 🙌 work 👍
lol that’s a great contest mate the both go hard
Thanks mate. They’re both fun.
Awsome bro it's pretty cool that rc bike, super cool 😎 how you can jump it too, love it man 😃💯💚🤘👍
What did you have to do to get it to shift I have the same issue with mine 🤦🏾♂️ I need to take it apart and stop being lazy 😂 I’ve just been running my nitro quad lately
Hi Haha I know the feeling Best to pull it out There’s 2 clutch shoes with 2 screws in each of them The Center screw you adjust so that the shoes sit about .5-1mm away from the housing Then pull the shoes apart with your hands and see how much tension there is. You want to be able to pull them apart with a bit of force but not too easy Pull the springs out to make sure they aren’t squashed or damaged first Try screwing them in until about half the cap head is sticking out from the top Then when in the car and you hear a shift you adjust the outer screws for the shift timing Make sure you adjust both same Bit of mucking around and a bit of time
🆒 & ℹ️ have 8️⃣ HPI savage 2️⃣5️⃣ 🤑👍🏼🛻🏁
Nice ..don't see to many of those anymore..sounds great 👍🏿
Hell yeah dude, awesome 👍👍👍
Nice man, that thing is awesome 👍👍👍
Nice tons of power..what header and pipe u running
Looks awesome bro you must have sold a few things to get that bro well done 🤜💯🇦🇺
wow never seen a nitro buggy do this!
Nice!!!
So I just had to put metal gears in mine. It’s not shifting at all, and I noticed there aren’t the little pins on the inside of the gear that the clutch gets stuck on to engage, do you know what I’m talking about? Should I just loosen the shift point for both gears? It shifted fine with plastic gears at this current setting. Thanks for any help you may have.
Hi there, by memory it had a pin in there to engage. I’ll have to look again Good way to do it is one gear at a time Lock both gears fully closed then start with the second gear, coming out 1/4 turn each time until it engages and is where you like it Then start on the third gear Will take a bit of time but will get there But if it doesn’t have the pin or anything to lock into then it won’t shift Maybe ask where you bought it from as well Might be a casting error
@@billanagnou3186 I wish I could send you a screen shot because even the product photo doesn’t show the little rod on the inside of the gear for the clutch the grab on to. I’m not sure if metal against metal works (like in the engine clutch) but I can’t get it to shift, and it was shifting into all the gears just a few days ago with the plastic gears.
Nice 👍
What a beauty…
God you can hear the metal gear ⚙️ 🤜💯
Goes hard mate 💯🤜
Damn that’s got some power in it 💯🔥🤜
That may or may not be finest wheelie anyone has ever done, on camera, with one of those. May as well remove the front wheels because they are just for looks at this point. 👍👍🏁🍻
That thing does some epic wheelies at speed! 👍👍
Yeah it’s nuts, had no wheelie bar then and couldn’t go full throttle. Just wants to flip plus old tyres were ballooning like crazy
Круто
Still have mine! Are you running the GX21?
Nice! I am yeah. Original motor still going strong
Very cool mate 💯🤜
Thanks mate. Fun truck that one
👀👀👍👍
A real gem this one and rarity for sure.
👀👂👍Looks and sounds amazing!